Home

Audiovox DM8710-8JAS User's Manual

image

Contents

1. adaptor is not plugged into the wall outlet The unitis not placed on a level surface Weak batteries NO SOUND FROM THE HEADSETS The headphones earphones plug is not firmly connected to the PHONES jack Adjust the volume control Dirty plug SKIPPING OF SOUND Dirty or defective disc Dirty lens Strong vibration WHEN USING WITH BATTERIES THE BATTERY LIFE IS SHORT Use alkaline batteries and not manganese batteries DISPLAY WINDOW SHOWS Er ERROR MESSAGE AND THE UNIT CANNOT BE OPERATED Nodisc dirty or scratched disc The unit will return to power off after approx 30 seconds or reset the player by pressing I button once and then insert a disc to start playing SPECIFICATIONS GENERAL OUTPUT at 1KHz OdB level Headphones earphones stereo mini jack 15 mW 15mW at 16 Ohms to 32 Ohms 3V 2 x AA LR6 MN 1500 alkaline batteries or DC IN 6V 350mA power adaptor Polarity of plug O C POWER REQUIREMENTS OPERATING VOLTAGE U S A Canada 120V AC 5 60Hz Middle East and Australia 240V AC 5 50Hz UK and Germany 230V AC 5 50 Hz Chile Singapore Malaysia amp Thailand Japan 230V AC 5 50 Hz 200 240V AC 5 50 Hz 100V AC 5 50 60 Hz We continually strive to improve our products specifications may change without notice Printed in China 811 810091 010
2. is not used be sure to disconnect the AC power adaptor FUNCTION OF CONTROLS OPEN Pil PROG MODE DC IN 6V Cee PHONES VOL I VOL Opening the CD tray To insert or remove a disc PLAY PAUSE Press B II to begin play Press BI during play to pause To release pause press BII again STOP Press once for disc playing stops Press twice for power off Track search and fast forward fast reverse SKIP Press kd lightly repeatedly To locate the beginning of the current selection or previous selections Keep Fed depressed To go back at high speed search SKIP Press pp lightly repeatedly To locate the beginning of next selection selections Keep pp depressed To go ahead at high speed search Program Playing the selections in the desired order Button for selecting the various play mode Mains socket PHONES jack For connecting the headphones earphones VOLUME Adjust the volume level DISC PLAYING 1 Open the CD tray with the OPEN B button 2 Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the disc fits into the pivot 3 Press the CD door to close ON DISPLAY WINDOWS When you press BI button the display window shows a gt iba Total number of tracks m 8 gt i 1 First track playing begins DURING PLAYING The
3. may result in malfunction When a CD RW is loaded it takes about 15 seconds before it can be play back POWER SOURCES USING WITH BATTERIES Insert two size AA batteries LR6 or MN1500 alkaline according to the and marks correctly aligned NOTES ON BATTERIES Insert batteries with correct polarity Donotuse old batteries together with new ones or different types of batteries together Ifthe electrolyte inside the battery should leak wipe the contaminated parts in the battery compartment with a cloth and replace the old batteries with new ones When the unit is not used for a long period of time remove the batteries Do not mix ALKALINE standard CARBON ZINC or rechargeable NICKEL CADMIUM batteries NOTES ON aaah During playback batteries are in use m is off When the battery voltage level is low i will flash for approx 10 15 minutes playback still continues in this period Playback would automatically come to a stop when the batteries have no more power Do not repeatedly press B button as the unit may operate incorrectly Replace all the batteries with new ones a will not be on when an AC adaptor is used 3 29 2004 3 57 PM USING ON HOUSE CURRENT If the unit you purchased does not include an AC power adaptor please use a 6V 350mA AC power adaptor Plus pole to the centre pin of the 3 5 mm socket When the unit
4. the dealer or an experienced radio TV technician for help You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment FOR THE CUSTOMERS IN THE UNITED KINGDOM AND EUROPEAN COUNTRIES This compact disc player is classified as a CLASS 1 LASER product CLASS 1 LASER PRODUCT A APPAREIL LASER DE CLASSE 1 The CLASS LASER PRODUCT label is located on the bottom PRODUCTO LASER DE CLASE 1 exterior PRODUTO LASER CLASSE 1 FOR THE CUSTOMERS IN CANADA This apparatus complies with the Class B limits for radio noise emissions set out in radio interference regulations This product contains a low power laser device CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED AVOID EXPOSURE TO BEAM PRECAUTION ON SAFETY As the laser beam used in this compact disc player is harmful to the eyes do not attempt to disassemble the casing Refer servicing to qualified personnel only Do not put any foreign objects in the safety slot inside the disc compartment If you do so the laser beam may come out when the lid is opened Do not put any foreign objects in the DC IN 6V external power input jack Should any solid objects or liquid fall into the unit disconnect the power supply and have the unit checked by qualified personnel before operating it any further ON OPERATION Since the CD system offers a wide dynamic range the peak
5. COMPACT DISC PLAYER OPERATING INSTRUCTIONS Before using the unit please read this manual thoroughly and retain it for future reference WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE TO AVOID ELECTRICAL SHOCK DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY CAUTION The use of optical instruments with this product will increase eye hazard INFORMATION FOR THE CUSTOMERS IN USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and If not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet that is on a circuit different from the one the receiver is connected Consult
6. G stops flashing and program playing starts NOTES Repeat play and intro play can be performed during program play But random play is inactive The program is erased when the disc compartment is opened or the auto power off function turns the power off Ifthe program mode is exited by means of the Il key all the programs would still remain in memory PROGRAM EDITION To add To add additional tracks to your selection during program playback press ll button first and then press PROG button repeatedly until QQ flashes in the display window Repeat the above step 2 and 3 to store additional tracks To check Press PROG button during programming before you press BII button Each time PROG button is pressed the track number appears in the display window To change When checking press either skip button to alter the track number for the program currently displayed Press PROG button to register the newly selected track into memory To delete When open the CD door including that program will be cancelled SKIP PROTECTION SYSTEM The SKIP PROTECTION System incorporates a special electronic circuit that prevents sound from skipping when the unit is subjected to shocks and vibration during play When you start playback the SKIP PROTECTION System turns on and E indicator appears in the display to prevent sound skipping When the unit receives a physical shock whi
7. ch prevents the laser pick up from reading the CD this system immediately starts playing the sound stored in its memory and continues until the laser pick up recovers If the unit is subjected to continuous shocks and all the data stored in memory is used up the sound will skip If the vibration stops then the data memory will be restored If continuous vibration is applied when the data memory is empty an error message will be displayed To reset the CD player press Hi once MAINTENANCE CLEANING THE UNIT Do not use volatile chemicals on this unit Clean by lightly wiping with a soft cloth CLEANING ACD If the CD skips or will not play the disc may need to be cleaned Before playing wipe the disc from the centre out with a cleaning cloth After playing store the disc in its case HANDLING THE DISC Only touch the CD on the edge to avoid leaving finger prints on its surface Do not stick paper or tape or write anything on the surface 3 29 2004 3 57 PM TROUBLE SHOOTING GUIDE Should any problem persist after you have made the following checks consult your nearest service facility DISC PLAY DOES NOT START The disc is inserted upside down or incorrectly Insert the disc correctly with the label surface up Dusty or defective disc Dirty or dusty lens The disc compartment lid is not closed Moisture condensation gt leave the unit in a warm place until the moisture evaporates The AC power
8. n To repeat whole disc Press MODE button during play until gt aLL appears in the display The whole disc will be played repeatedly INTRO PLAY Playing the first about ten seconds of all the tracks 1 Press MODE button during play until INTRO flashes in the display 2 Press PII button to begin INTRO play Play each track for approx 10 seconds 3 Pressing PII button again will cease INTRO play and continue playback in the NORMAL play mode NOTE INTRO play always starts from the first track DM8100_9H_wRW wo Rech GB 010 pmd 2 SHUFFLE PLAY playing the tracks in random order 1 Press MODE button during play until SHUFF flashes inthe display N lt 67 2 Press II button to begin the SHUFFLE play To locate the next track press pp button However you cannot locate the previous track even if you keep the keq button pressed PROGRAM PLAY playing the tracks in the desired order 1 Press PROG button until PROG and QQ flash in the display 2 Press pp or button to select the desired selection 3 Press PROG button to register track For example No 6 as the first selection The track No indication will return to QQ 4 Repeat steps 2 and 3 until all the desired tracks are programmed up to 20 tracks 5 Press II button PRO
9. re evaporates Forthe unit to operate at its best it should not be subject to temperatures below 5 C 41 F or above 35 C 95 F NOTES ON HEADPHONES EARPHONES Do not use headphones earphones while driving cycling or operating any motorized vehicle it may create a traffic hazard and is illegal in some areas It can also be potentially dangerous to play your headsets at high volume while walking especially at pedestrian crossings You should exercise caution or discontinue use in potentially hazardous situations Avoid using headphones earphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce volume or discontinue use Keep the volume at a moderate level This will allow you to hear outside sounds and to be considerate to the people around you If you have any questions or problems concerning your unit please consult your nearest dealer NOTES This unit can play Audio Discs including CD Recordables and CD Rewriteables Do not try to play CD ROMs CD Is CDVs or computer CDs The unit may not play a CD R RW disc that is recorded on personal computers or some kinds of CD R RW recorders because of differences in recording platforms Donotattach any seal or label to either side the recordable side or the labled side of a CD R RW disc It may cause malfunction Donotuse irregular shape CDs example heart shaped octagonal ones It
10. s of the high level inputs are recorded with high fidelity and the noise level is very low Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs If you do so the speakers may be damaged when the peak level of the sound is played The lens on the disc table should be kept clean Do not touch the lens or poke atit If you do so the lens may be damaged and the unit will not operate properly DM8100_9H_wRW wo Rech GB 010 pmd 1 Note The normal function of the product may be disturbed by interference and shows error message just reconnect the power source for resume normal operation ON INSTALLATION Never install the unit where it would be subject to heat sources such as radiators or airducts direct sunlight excessive dust moisture or rain mechanical vibration or shock uneven surface Donotplace any heavy object on top of the unit When the unit is used with an AC power adaptor do not wrap the unit in a cloth blanket etc If you do so the temperature inside and outside the unit may rise considerably resulting in malfunctioning of the unit or serious accidents Ifthe unit is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the unit Should this occur the unit will not operate In this case remove the disc and leave the unit in a warm place for several hours until the moistu
11. track number of the current selection appears When ff is pressed during play total number of tracks on the disc will be displayed and the unit is still on The unit will return to full stop mode automatically after approximately 30 seconds if no button is pressed again within 30 seconds If I is pressed again the unit will return to full stop mode If II is pressed the unit returns to play mode DURING PAUSE The playing track number will flash 1B Pause mode of the first track When no disc is inserted onto the player and when button is pressed the display window will show p The unit cannot be operated when error message is displayed After approx 30 seconds the unit will return to full stop mode Reset the player by pressing Il once and then insert a disc to start playing VARIOUS PLAYING MODES During playback every time the MODE button is pressed the playing mode would be changed to the next one as follows IN NORMAL PLAYING MODE NORMALPLAY gt lt ONE REPEAT ONE gt lt ALL REPEAT ALL gt INTRO gt SHUFFLE TP NORMAL PLAY Playing the whole disc The CD is played once from the beginning to the end REPEAT PLAYBACK Repeat one and repeat all To repeat the same track Press MODE button during play until lt ONE appears in the display window Select desired track to be played only once by pressing ppl or kd butto

Download Pdf Manuals

image

Related Search

Related Contents

DCT98GSM/25 - Gladiusnet S.r.l.    Xuzhou Lianchuang Medical Equipment Co., Ltd International Trade  Manuel - Cateye    Oster 2498 User's Manual  Élaboration d`un dépliant sur les pratiques  BEDIENUNGSANLEITUNG - Besøg masterpiece.dk    User Guide - Sonic Alert  

Copyright © All rights reserved.
Failed to retrieve file