AudioBahn A1200N User's Manual
Contents
1. EN NND E 3 S DIN REAR MOUNT Method If your vehicle is a Nissan Toyota follow these mounting instructions Use the screw holes marked oyot N Nissan located on both sides of moun lied with your Side view showing Screw Holes marked T N Factory Radio Mounting Bracket lt Dashboard or onsole ZB BS gg DEN Using the Detachable Front Panel To Detach the Front Panel t Press the OPEN CLOSE button then the front panel will slide down Bottom Button 2 When the panel bracket is in slide up position insert one side of the front panel to its proper position and push the other side into the panel bracket a click sound should be heard 2 Press the OPEN CLOSE button again the front panel will slide up Front Panel 3 When the front panel slides down press the bottom button of the front 3 Note that if the front panel fails to lock panel upward and pull it out from the in position properly pressing control panel bracket button may not function and the display may be missing some segments Press the OPEN CLOSE button and then reinstall the front panel again SS Precautions when handling Bottom 2 1 Do not drop the front panel Buttop 2 Do not put pressure on th2. QUALIT f RE 21 amp PUR 1 8 XM READY CD PLAYER WITH FLIP DOWN DETACHABLE FACE iPOD DIRECT USB INTERFACE AND REMOTE A1200N OPERATING INSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTURE USE AND REFERENCE JE B8 EERE eee SR ER B gg 1 3 The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service We make you look as good as you sound We strive to take car audio to an extreme the world has never seen and a world that never stops evolving Audiobahn was established in 1997 with one long term goal in mind Build it Bigger Badder amp Better and the people will take notice We back this statement with an engineering team that has brought home several Innovations Design amp Engineering Showcase Awards and a marketing team from around the world that spends countless hours developing our no compromise products to satisfy the most discriminating enthusiasts Our global manufacturing facilities feature 1509002 ratings the highest level of quality control awarded in the electronics manufacturing industry fully robotic assembly lines and a state of the art California based R amp D laboratory Due to overwhelming response from our competitors and our go
3. Date product was sent Contact Information Audiobahn Headquarters 114 South Berry 51 Brea CA 9282 Phone 800 488 8595 Fax 714 988 0433 Pacific Coast Time 9am 5pm Mon Fri tech audiobahn com 22
4. Before finally installing the unit connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly Use only the parts included with the unit to ensure proper installation The use of unauthorized parts can cause malfunctions DIN FRONT MOUNT Method A Consult with your nearest dealer if Installation Opening installation requires the drilling of holes This unit can be installed in any dashboard or other modifications of the vehicle having an opening as show below Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop ES like an emergency stop If installation angle exceeds 30 from imm horizontal the unit might not give its Installing the unit optimum performance Be sure you test all connections first and then follow these steps to install the unit 28 30 1 Make sure the ignition is turned off and then disconnect the cable from the vehicle battery s negative Avoid installing the unit where it would terminal be subject to high temperature such 2 Disconnect the wire harness and the as from direct sunlight or from hot air antenna from the heater or where it would be 3 Press the release button on the front subject to dust dirt or excessive panel and remove the control panel vibration see the steps of to detach the front panel 4 Lift the top of the outer trim ring then
5. MonGo Stereo 11 Remote Control handset 18 XM operation I EESpecilicat e 19 Switching to XM IU Sho NV 20 Selecting user preset channel 12 Warning Sel 21 Selecting channel up down 7 22 23 Pl 12 Storing preset channels 12 XM mode selection n Dc 23 18 Switching CD mode 13 SS UNNracks mS PLL Synthesizer Stereo Radio CD Player MP3 Player WMA Player XM Function IPOD Function USB Interface Automatic Memory Storing Fold Down Detachable Panel Preset Equalization Electronic Shockproof ESP Function CD Changer Control Auxiliary Input Function Remote Control 2 ES E END Installation NN D E E EB ES EN BH Notes TAKE OUT SCREW BEFORE INSTALLATION Choose the mounting location where the unit will not interfere with the Before install the unit please remove the normal driving function of the driver two screws Take out screw before installation
6. Reh RED BLACK GROUND B mq Leh WHITE GREY REAR RCA CABLE Rch RED POWER TURN ON BLUE on WHITE FRONT Lch WHITE GREY FRONT Rch EDEN 5 WHITE BLACK GREY BLACK REAR Lch T GREEN VIOLET 41 REARRch SPEAKER SPEAKER GREEN BLACK VIOLET BLACK LOCATION OF KEYS Operation SWITHCHING ON OFF THE UNIT Switch on the unit by pressing any button except OPEN button 7 and 4 button 4 When system is on press O PWR button 9 to turn off the unit FACEPLATE RELEASE Press OPEN button 7 to detach the removable faceplate SOUND ADJUSTMENT Press SEL button 10 to select the desired adjustment mode The adjustment mode will change in the following order VOL BAS BAL FAD SW LVL Volume gt Bass T reble Balance Fader sub Level By rotating the VOL knob 11 clockwise or counter clockwise it is possible to adjust the desired sound quality Press and hold the SEL button 10 for several seconds to enter into the selection for the situation of beep sound then rotate the VOL knob 11 clockwise or counter clockwise to select as follows 2ND gt ALL BEEP OFF BEEP 2ND mode The beep is only generated when all allowed double function button is pressed long several seconds e g When preset button is pressed When BND LOU button 13 is pressed When AS PS D AUD button 18
7. automatically and the IPOD will appear on the display e Select Category When IPOD is playing Press BND button 13 the category will appear on the display by rotating the VOL button 11 clockwise or counterclockwise to change the category among PLYLIST ARTIST ALBUM GENER SONG COMPOSER then press SEL button 10 to confirm the selected category Operation Select Song Press DSP button 15 the display will show the current song title stored in the IPOD By rotating rotating the VOL button 11 clockwise or counterclockwise to change the song title to the next song or the previous song Then press SEL 10 button to play the selected song and the IPOD will appear on the display DSP When playing song and display IPOD press DSP button 15 will show the Song D5s information as follow Song Title Artist Name Album Name play Time Clock IOPD 9 PAU When playing song press PAU button 20 on the front panel will pause the playing Press it again will resume playing RPT When playing song press RPT button 22 shortly will repeat the current song and RPT SONG will appear on the display Press it for about 2 seconds will repeat Album and RPT ALBM will appear on the display In the Song or Album repeat mode press RPT button again will stop repeat and RPT OFF will appear on the display SHF When playing song press button 23 shortly after the current song p
8. o 9 4 LA Q e XR C D 9 em o 4 rdi Un N lt 2 Cc C Warranty Continued How to receive warranty service Contact your local Authorized Audiobahn Dealer or call Audiobahn at 800 488 8595 between the hours of 9 00 AM and 5 00 PM PST If you are having problems with your system we recommend you check the product carefully and thoroughly to confirm that the product truly has a manufacturer defect as opposed to abuse or other components in the system causing the failure This might include having an Authorized Audiobahn Dealer look at the product to confirm the source of the problem Any product found to have a manufacturer defect will be replaced with a new piece of the same or similar model or repaired at the discretion of Audiobahn Any product found to have no manufacturer defect will be returned to the sender at their cost You must acquire a Return Authorization Number RA 7 prior to returning ANY product to Audiobahn That Return Authorization Number RA must be prominently and clearly marked on the outside of the shipping carton or product delivery will be refused no exceptions will be made Please note All shipping and handling to and from charges will be the sole responsibility of the consumer Please record and keep your Return Authorization Number RA in the event that further communication is required Return Authorization Number RA
9. side or the recording side of any discs as it may cause a malfunction Dirt dust scratches and warping discs will cause misoperation Notes on CD Rs recordable CDs CD D 26 Be sure to use discs with following marks only for the unit to play iSe 8 2 The unit cannot play a CD R and CD RW that is not finalized Please refer to the manual of your CD R CD RW recorder or CD R CD RW software for more information on finalization process Depending on the recording status conditions of the disc and the equipment used for the recording some CD Rs CD RWs may not be played on this unit See 1 NO CD COMPACT DIGITAL AUDIO CD 1 To have more reliable play back please see following recommendations a Use CD RWs with speed 1x to 4x and write with speed 1x to 2x b Use CD Rs with speed 1x to 8x and write with speed 1x to 2x c Do not play a CD RW which has been written for more than 5 times C Notes on MP3 files 1 The disc must be in the ISO9660 level 1 or level 2 format or Joliet or Romeo in the expansion format 2 When naming a MP3 file be sure the file name extension is MP3 For a non MP3 file even though the file name extension is MP3 the unit cannot recognize it E EC R C E NN NN NN EE emote Contro FUNCTION KEYS amp CONTROL 1 PWR Power ON OFF Button 2 DSP 0 D
10. that the wire connections are unprotected or are subject to pinching or damage from nearby objects The 12V DC power wire must be fused at the battery positive terminal connection Before making or breaking power connections at the system power terminals disconnect the 12V wire at the battery end Confirm your radio head unit and or other equipment is turned off while connecting the input jacks and speaker terminals If you need to replace the power fuse replace it only with a fuse identical to that supplied with the system Using a fuse of different type or rating may result in damage to this system which is not covered by the warranty a ge Disclaimer Specifications are subject to change without notice For the most updated Specifications call Audiobahn your local Authorized Audiobahn Dealer or check the Audiobahn website tech audiobahn com 20 Warranty Audiobahn Consumer Product Warranty Policy Audiobahn products are manufactured with the highest quality components and some of the most advanced technology available Because of this we recommend that you have your new products installed by an Authorized Audiobahn Dealer A list of Authorized Audiobahn Dealers can be found on our web page Warranty Period One year from the original date of purchase Warranty Coverage This warranty covers manufacturer defects only The warranty is applicable to the original purchaser and is non transferabl
11. BND LOU ENT button to start the title search In case the selected title is a directory name display will show then Use the TUNE TRACK UP DOWN buttons to list all songs under this 4 ie Operation directory and select the title Press BND LOU ENT button to confirm and start the play Repeat the above steps if the newly selected title is again a directory Searching From Root Directory Press AS PS D AUD button for three times The unit searches file or directory from root by TUNE TRACK UP DOWN buttons D DIR icon turns on if the name is directory Display will list all available directories and songs Select the desired directory songs by using TUNE TRACK UP DOWN buttons and BND LOU ENT button to confirm If the selected title is a song it starts to play If the selected title is a directory name display will show 59 then Use the TUNE TRACK UP DOWN buttons to list all songs under this directory and select the title Press BND LOU ENT button to confirm and start the play Repeat the above steps if the newly selected title is again a directory Searching From Current Directory Press AS PS D AUD button for four times The unit searches file or directory from current directory by TUNE TRACK UP DOWN buttons D DIR icon turns on if the name is directory The current directory name is displayed for a second and the currently playing file name is displayed selected The user can
12. DIN FRONT REAR MOUNT pull it out to remove it This unit can be properly installed either 5 The two supplied keys release tabs from Front conventional DIN Front inside the unit s sleeve so you can mount or Rear DIN Rear mount remove it Insert the keys as far as they installation utilizing threaded screw holes will go with the notches facing up into at the sides of the unit chassis the appropriate slots at the middle left For details refer to the following and right sides of the unit Then slide illustrated installation methods the sleeve off the back of the unit Installation Sleeve 6 Mountthe sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver Not all tabs will be able to make contact so examine which ones will be most effective Bending open the appropriate tabs behind the dashboard to secure the sleeve in place Dashboard 7 Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables 8 Slide the unit into the sleeve until it locks into place 9 To further secure the unit use the supplied metal strap to secure the back of the unit in place Use the supplied hardware Hex Nut Mbmm and Spring Washer to attach one end of the strap to the mounting bolt on the back of the unit If necessary bend the metal strap to fit your vehicle s mounting area Then use the supplied hardware Tapping
13. Screw 5x25mm and Plain Washer to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard This strap also helps ensure proper electrical grounding of the unit BH Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard Spring Washer Metal Strap Mounting Bolt Plain Washer Tapping Screw 10 Reconnect the cable to the vehicle battery s negative terminal Then replace the outer trim ring and install the unit s front panel see the steps of to install the front panel Remo ing the unit 1 Make sure the ignition is turned off then disconnect the cable from the vehicle battery s negative terminal 2 Remove the metal strap attached the back of the unit if attached 3 Press the release button to remove the front panel 4 Lift the top of the outer trim ring then pull it out to remove it 5 Insert both of the supplied keys into the slots at the middle left and right sides of the unit then pull the unit out of the dashboard Installation 18 END
14. UL 15 1011110 5 8 1 10 Playing all tracks in random 13 0 222 22 0 10 selectngdglsec a n a a 13 pus lassintortriatlQL eros oce coner eret 10 operation mm 14 Selsile 10 Switching to CD mode 14 W m T 10 14 10 Selecting tracks in single step 14 PIGUIGEGIYSIAIGISDIAY 55 22 29 25 724 10 Selecting directory up down 14 Remote sensor 10 pausing playing 22222122 14 Flashing LED MEM 10 Previewing all tracks 3 14 ESP function AI 10 Repeating the same track 14 Reset function 42 gm 11 Playing all tracks in random 14 Radio operation 8 NN 11 Selecting tracks by Switching to radio mode 11 AS PS D AUD button 14 Selecting the frequency band 11 Disco 15 Selecting station E 15 distance 1 11 Audio DSP MP3 WMA decoder 16 Automatic memory storing amp Mixed CD operation 16 Biogkrarnnmscanning au ms IPODOperaton gag 16 1 02 2 rotes
15. al to participate in even more events this year we created AUDIOBAHN This organization is designed to create a support network along with shirts and perks for team members TEAM AUDIOBAHN is not only for the diehard competitor but also for anyone that loves car audio as much as we do With four levels of play one is right for you to get started in the Audiobahn family Our Technical Department and entire staff look to strive above and beyond the rest of the pack by going that extra mile to help you out Whether you happen to be a veteran competitor or a beginner car audio enthusiast that does not know a voice coil from a spider We are all here to help you get the best system you can with what you have Judge for yourself and remember what it s all about If it s not Bigger Badder amp Better it s not Audiobahn If audio is your life Audiobahn is the brand for you We make you look as good as you sound People never stop trying to get the best product so we will never stop making it learn more about TEAM AUDIOBAHN please give us a call see our website at www audiobahninc com or email us at team audiobahninc com to learn about all the details TN E _ E P a Introduction Dear Customer Congratulations on your purchase of the worlds finest brand of car audio products Here at Audiobahn Inc we are devoted to making our musical reproduction the very best and we are pleased you
16. and operating the CD changer can be found in the operating instructions supplied with your CD changer SWITCHING TO CDC MODE Keep pressing MOD button 6 shortly until the CDC mode display appears Playback begins with the first CD that the CD changer detects SELECTING TRACKS Press TUNE TRACK i button 16 or TUNE TRACK button 17 to move to the previous track or the following track Track number shows on display Hold TUNE TRACK i button 16 TUNE TRACK button 17 to fast reverse or fast forward CD play starts from when you release the button PAUSING PLAYING Press PAU button 20 to pause CD player Press it again to resume play PREVIEWING ALL TRACKS Press SCN button 21 shortly to play first several seconds of each track on current disc Press and hold SCN button 21 for several seconds to play first several seconds of the first track on each disc in the CD magazine Press it again to stop intro and listen to track REPEATING INDIVIDUAL TRACKS OR WHOLE CDs Press RPT button 22 shortly to continuously repeat the same track Press and hold RPT button 22 for several seconds to continuously repeat all tracks on the current disc Press it again to stop repeat PLAYING ALL TRACKS IN RANDOM Press SHF button 23 shortly to play all tracks on the current disc in random order Press and hold SHF button 23 for several seconds to select a disc in random and play the selected disc in random order Press i
17. ck Track number shows on display Hold TUNE TRACK button 16 or TUNE TRACK lt button 17 to fast reverse or fast forward CD play starts from when you release the button PAUSING PLAYING Press PAU button 20 to pause CD player Press it again to resume play PREVIEWING ALL TRACKS Press SCN button 21 to play first several seconds of each track on the current disc Press again to stop intro and listen to track REPEATING THE SAME TRACK Press RPT button 22 to continuously repeat the same track Press it again to stop repeat PLAYING ALL TRACKS IN RANDOM Press SHF button 23 to play all tracks on CD in random order Press again to cancel the function EJECTING A DISC Method A When a disc is inserted into the disc slot 5 and playing shortly press OPEN button 7 to slide down the front panel then press and hold OPEN button 7 for several seconds and let go and the it will stop the unit playing the CD and eject the disc from the disc slot shortly press OPEN button 7 again will close the front panel Method B When a disc is inserted into the disc slot 5 and playing press and hold OPEN button 7 for several seconds and let go to slide down the front panel and eject the disc from the disc slot then shortly press OPEN button 7 will close the front panel CDC OPERATION You can connect a CD changer to the unit with CDC operation version only Information on handing CDs inserting CDs
18. ction of each pons Category mode Direct Tune When Category mode is engaged the CATEGORY function is turned on in the display When Category mode is released the CATEGORY function is turned off When Direct mode is engaged DIRECT of alphanumeric display is turned on Select Category and TUNE UP DOWN within selected Category Use CD DIR CAT A button 25 or CD DIR CAT v button 24 to select desire Category and press BND LOU button 13 In Category mode channels can be tuned within the same category When the user wishes to search by Category press LOC XM MOD button 2 can be pressed until it goes into Category search mode Press M6 button 25 or M5 button 24 up and down to get to the desired category To change channels press LOC XM MOD button 2 again to Normal mode and then press TUNE TRACK button 17 or TUNE TRACK i button 16 to select the channel up or down Operation CD OPERATION SWITCHING TO CD MODE If there is no CD inserted in the driver Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance The CD is drawn into the driver automatically CD playback begins If a CD is already inserted in the driver Keep pressing MOD button 6 shortly until the CD mode display appears SELECTING TRACKS Press TUNE TRACK button 16 or TUNE TRACK i button 17 to move to the previous track or the following tra
19. e e The main unit can only support the standard USB memory disc driver USB MP3 player is not a standard which means different brand name or different models have their own standard So our product cannot support every MP3 player When connecting an MP3 player and there has normal battery in the player non rechargeable battery you should remove the battery from the MP3 player then connect it to the USB interface Otherwise it may cause battery burst When in USB play mode be sure not to remove the USB driver from the USB interface CAUTION When there are important files in the USB device do not connect it to the main unit to play And don t play the CD R RW disc that has important files in it Because any wrong operation may cause files loss And our company assumes no responsibility for this RECORD OPERATION This unit provides record function In radio CDP mode CD Changer AUX or IPOD mode press P EQ REC button 19 shortly to activate RECORD mode The unit will record files to USB and the format of the files is WMA The unit can find and play the record files in the device that connected to the unit through the USB interface There will be shown file name during recording Press P EQ REC button 19 shortly again to complete recording Notes e During recording be sure not to remove the external device from the USB interface or turn off the power or switch off the ACC wire Otherwise it
20. e You must have a receipt from an Authorized Audiobahn Dealer that shows the location of purchase price paid and date of purchase Products purchased by consumers from an Authorized Audiobahn Dealer outside the United States are covered only by that countries Distributor and not by Audiobahn Notes Complete subwoofer enclosures Audiobahn will replace defective subwoofers plexiglass or neon only Do not send the entire enclosure unless the enclosure is defective itself You must receive prior authorization and an RA before sending in any complete enclosure Audiobahn will only replace L E D s found to be defective at the time of purchase Audiobahn warranties do not cover the following Any product not purchased from an Authorized Audiobahn Dealer including Internet dealers Damage caused by abuse misuse accident water flood or theft including any cosmetic damage to the body of the product Damage caused by improper installation Any cost or expense related to removal or reinstallation Anyunauthorized services Any product that has the serial number removed altered or defaced Subsequent damage to any other components Pinched cut or stripped wires Any product that is new and or found to be in working condition E D indicators on electronics Technical Assistance 800 488 8595 tech audiobahc com 21 O M qur Q 9 O o S E
21. e display or 4 For safekeeping store the front panel in the supplied protective case immediately after being removed 3 control buttons when detaching or re installing the front panel Do not touch the contacts on the front panel or on the main unit body It may result in poor electrical contact 4 f any dirt or foreign substances adhered on the contacts they can be removed with a clean and dry cloth 5 Do not expose the front panel to high temperatures or direct sunlight in anywhere Front Panel 6 Keep away any volatile agents e g benzene thinner or insecticides from touching the surface of the front panel Do not attempt to disassemble the front panel Protective Case To Reinstall the Front Panel 1 When the panel bracket is in slide 7 down position insert the front panel into panel bracket and press OPEN CLOSE button to slide up Wiring Connection MAIN UNIT CD CHANGER BLACK CONNECTOR lt SOCKET AUX IN CABLE p Rech RED 4 PIN 9 PIN fof Leh WHITE BLACK IPOD CONNECTOR SOCKET BLACK XM RECEIVER CONNECTOR SOCKET Rech RED EN m XM AUDIO CABLE SUBWOOFER CABLE GREEN IGNITION b SWITCH ACC MEMORY BROWN BACK UP B on FRONT RCA CABLE
22. e not been pressed for several seconds they will return to seek tuning mode and AUTO appears on the display LOCAL DISTANT Press LOC button 2 to select between local and distant stations Local setting for reception of strong station and a distant setting for reception of weaker stations This function is effect during AUTO SEEK operation 11 AUTOMATIC MEMORY STORING amp PROGRAM SCANNING Automatic Memory Storing Press AS PS D AUD button 18 for several seconds the radio searches from the current frequency and checks the signal strength until one cycle search is finished And then 6 strongest stations are stored into the corresponding preset number button Program Scanning Press AS PS D AUD button 18 shortly to scan preset station When the field strength level is more than the threshold level of stop level the radio is holding at that preset number for several seconds with releasing mute then searches again STATION STORING Press any one of the preset buttons 14 1 to 6 to select a station which had been stored in the memory Press this button for several seconds until 2ND beeps come out current station is stored into the number button MONO STEREO Press MON button 1 to select mono or stereo mode You can sometimes improve reception of distant stations by selection mono operation ESP FUNCTION This unit has built in electronic shockproof protection it can be shockproof about sev
23. efective disc new one Temperature inside the car Cool off or until the ambient is too high temperature return to normal Condensation Leave the player off for an hour or so then try again Wiring is not properly Check wiring connection connected Sound skips The installation angle is Adjust the installation angle less more than 30 degrees than 30 degrees The disc is extremely dirty Clean the compact disc then or defective disc try to play a new one The operation keys The built in microcomputer Press the RESET button do not work is not operating properly Front panel is not properly fixed due to noise into its place The radio does not The antenna cable is not Insert the antenna cable firmly work The radio connected station automatic selection does not The signals are too weak Work 20 No sound Volume is in minimum Adjust volume to a desired level VJ m Han O Q S Nen 9 u 4 4 e o eo 0 09 4 4 Un Un lt E an Warning Disclaimer WARNING Investigate the layout of your automobile thoroughly before drilling or cutting any holes Take care when you work near the gas tanks gas lines hydraulic lines and electrical wiring Attach the system securely to the automobile to prevent damage particularly in the event of an accident Do not mount the system so
24. eral 30 seconds Operation XM OPERATION SWITCHING TO XM MODE Press MOD button 6 shortly to select XM mode SELECTING USER PRESET CHANNEL At XM mode the XM user preset channel group 3 channels is toggled cyclically through the group by quickly pressing the BND LOU button 13 The channel will change in the following order XM2 SELECTING CHANNEL UP DOWN Press the TUNE TRACK button 17 or TUNE TRACK 1 button 16 to select the channel up or down SEARCHING CHANNEL When the AS PS button 18 is pressed the channel searches for each user preset channel from XM1 to XM2 to XM3 When an available channel is detected the channel will be held at that preset number and play for 5 seconds After that it will mute and search for another available channel STORING PRESET CHANNELS The preset buttons 14 can be used to store 6 channels for convenient access to your favorite channels Programming channels 1 Select the desired channel you want to store in memory 2 Press and hold one of the preset buttons 14 for more than 2 seconds until the corresponding preset button number appears Repeat steps 1 and 2 to program additional channels Quick tuning Press one of the six preset buttons 14 shortly to select a preset channel directly XM MODE SELECTION Press LOC XM MOD button 2 to switch Category mode Direct Tune mode or normal It is used as the 12 sele
25. handset to the remote sensor IR 26 Press the function keys on the handset to control the system FLASHING LED If the front panel does not install in the main unit the LED 12 will be flashing ESP FUNCTION If the unit has the electronic shockproof function it can be shockproof about several ten of seconds Operation RESET FUNCTION RESET button 27 must be activated with either a ball point pen or thin metal object The RESET button is to be activated for the following reasons Initial installation of the unit when all wiring is completed All the function buttons do not operate Error symbol on the display Note If press RESET button 27 the unit can t work yet please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel RADIO OPERATION SWITCHING TO RADIO MODE Press MOD button 6 shortly to select radio mode the radio mode appears in the display together with the memory band and frequency SELECTING THE FREQUENCY BAND At radio mode press BND LOU button 13 shortly to select the desired band The reception band will change in the following order FM1 FM2 FM3 AM SELECTING STATION Press TUNE TRACK button 17 TUNE TRACK i button 16 shortly to activate automatic seek function Press for several seconds until MANUAL appears on the display the manual tuning mode is selected If both buttons hav
26. have chosen our product Through years of engineering expertise hand craftsmanship and critical testing procedures we have created a wide range of products that reproduce music with all the clarity and richness you deserve Formaximum performance we recommend you have your Audiobahn product installed by an Authorized Audiobahn Dealer as we provide specialized training through our Audiobahn Installer Training Programs Please read your warranty keep your receipt and original carton for possible future use Great products and proper installation are only a small piece of the puzzle when it comes to your system Make sure that your installer is using only 100 authentic installation accessories from the Audiobahn Connections The Audiobahn Connections line has everything ranging from the smallest terminal to power wires up to 0 gauge and 4 channel RCA cables To get a free brochure on Audiobahn products and Audiobahn Connections in the U S call 714 988 0400 or e mail us at sales audiobahninc com WARNING Continuous exposure to sound pressure levels over 100 dB may cause permanent hearing loss High powered autosound systems may produce sound pressure levels well over 135dB Need we say more Use common sense If after reading this manual you still have questions regarding your product we recommend that you see your nearest Audiobahn Dealer A list of Authorized Audiobahn Dealers can be found on our web page If you need further as
27. is pressed BEEP ALL mode The beep is generated when every button is pressed BEEP OFF mode The beep is disabled LOUDNESS Press BND LOU button 13 for several seconds to reinforce the bass output Press it for several seconds again to release this function DISPLAY INFORMATION When pressed quickly the DSP button 15 changes the display as follows In AM FM mode 10 gt Frequency gt CLOCK gt In XM mode gt Channel Name gt Category Name gt Artist Name gt Song Title gt CLOCK gt In CD mode gt CD gt CLOCK gt In CDC or AUX mode gt CDC or AUX gt CLOCK gt Each displaying time is 5 seconds the display will return to the first position after 5 seconds SET THE CLOCK Press the DSP button 15 shortly until the clock is shown on the display Then hold down DSP button until the clock flashes Then press the TUNE TRACK gt gt i button 17 to change hours or TUNE TRACK i button 16 to change minutes MUTE Press MUT button 3 to mute down the sound instantly If any button is pressed in the mute state the mute state is released EQUALIZATION Press P EQ button 19 to turn on equalization function and to select desired audio mode There are five kinds of mode as below M ROCK M gt DSP LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display 8 REMOTE SENSOR Point the remote cantrol
28. isplay Button For MP3 WMA Operation SEL Sound Mode Select Button Character Shift Right For MP3 WMA Operation 4 VOLA Volume Up Button Character Select A B 8 9 0 For MP3 WMA Operation 5 VOLV Volume Down Button Character Select A B 8 9 0 For MP3 WMA Operation 6 BND LOU ENT Band Select Button When pressed shortly Loudness Button When pressed long Enter Button For MP3 WMA Operation 7 MOD 7 Mode Button S U 7 For MP3 WMA Operation 8 TUNE SEEK ma 8 Tune Skip Down Button Select Channel Down in XM Mode V W X 8 For MP3 WMA Operation 9 9 Tune Skip Up Button Select Channel Up in XM Mode Y Z SPACE 9 For MPS WMA Operation 10 AS PS D AUD Automatic Memory Storing amp Program Scanning Button Mode Select Button For MP3 WMA Operation 11 M1 M6 Preset Buttons A R 1 6 For MP3 WMA Operation 12 PAU Pause Button A B C 1 For MP3 WMA Operation 13 SCN Scanning Button D E F 2 For MP3 WMA Operation ET RPT Repeat Button G H I 3 For MP3 WMA Operation 5 SHE Shuffle Button J K L 4 For MP3 WMA Operation 16 DISC CAT CD Down Button For CD Changer Version Only Select Category Down in XM Mode M N O 5 DIRECTORY DOWN For MP3 WMA Operation CD Up Button For CD Changer Version Only Select Category Up in XM Mode P Q R 6 DIRECTORY UP For MP3 WMA Operation 18 LOC XM MOD Local Distant Select Button XM M
29. lay to the end will play the songs in current category in random order and SONG RDM will appear on the display Press it for about 2 seconds will play all songs in the album and ALBM RDM will appear on the display In the Song or Album shuffle mode press SHF button again will stop shuffle and RDM OFF will appear on the display NOTE You can set the repeat mode and shuffle mode in the IPOD if you select the mode is off in the IPOD RPT button and SHF button on the player D5s panel will be invalidation TURE TRACK UP DOWN When playing the song press TURE TRACK Up button 17 will play the next track in the current category but you can not enter to the next category When playing the song more then 1 seconds press TURE TRACK Down button 16 will play the song from the start position 17 When playing the song less then 1 seconds press TURE TRACK Down button 16 will play the previous track When playing the song press and hold TURE TRACK Up Down buttons 17 16 for more then 2 seconds will fast forward reverse of the playing song And the display will show the playing time e g 0 00 Note Press TURE TRACK Up Down buttons cannot enter into the next previous song DISC NOTE A Notes on discs T Attempting to use non standard shape discs e g square start heart may damage the unit Be sure to use round shape CD discs only for this unit Do not stick paper or tape etc onto the label
30. may destroy the record files and the USB interface may cause a malfunction During recording in one mode be sure not to switch to another mode such as radio CD CDC or AUX mode You 16 must press P EQ REC button 19 shortly to complete recording then you can change the current mode e When playing MP3 MWA disc in CDP the unit cannot record files to USB AUDIO DSP MP3 WMA DECODER The following standards and bit rate are supported Bit Rate kbps Supported Mode MPEG1 Audio 32 48 64 96 STEREO LAYER3 128 192 256 3 44 1kHz 20 Windows Media Audio 44 1 2 64 96 128 192 STEREO Our USB solution can supports 1 Folder 1024 max 2 File 4096 max 3 Depth of folder 8 layers 4 Size 1GB MIXED CD OPERATION If available the unit can play the mixed CD disc the disc contains both CD audio tracks and files When you insert a mixed CD disc into the CD slot it starts to play the CD audio tracks And the operation is the same with the CD operation described as above If you want to switch to play CD audio tracks repeatedly when it jumps to the end i e when it selects the first directory or the last directory and then press M5 button 24 or M6 button 25 again it will start to play the CD tracks again In this way you can switch between playing CD audio tracks or MP3 songs repeatedly IPOD OPERATION After connect IPOD to the unit the unit will play the IPOD
31. ode Select Button 18 17 DISC CAT A Specifications GENERAL Power Supply Requirements Chassis Dimensions Tone Controls Bass at 100 Hz Treble at 10 KHz Maximum Output Power Pre Out RCA Signal Voltage Current Drain Pre Out RCA Signal Voltage CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response RADIO Frequency Coverage Sensitivity S N 30 dB Stereo Separation Frequency Coverage IF Sensitivity S N 20 dB BEN 141 Lb DC 12 Volts Negative Ground 178 W x 160 D x 50 H 10 dB a T0 ele 4x45 watts 4 15 Ampere max More than 55 dB More than 45 dB 40Hz 18 KHz FM 87 5 to 107 9 MHz 10 7 MHz 4uV 22 DdB AM 530 to 1710 KHz 450 KHz 36 dBu 19 Troubleshooting Before going through the checklist check wiring connection If any of the problems persist after checklist has been made consult your nearest service dealer No power The car ignition switch is If the power supply is not on connected to the car accessory circuits but the engine is not moving switch the ignition key to ACC Disc cannot be Presence of CD disc inside Remove the disc in the player loaded or ejected the player then put a new one Inserting the disc in reverse Insert the compact disc with direction the label facing upward Compact disc is extremely Clean the disc or try to play a dirty or d
32. om order Press again to cancel the function 14 SELECTING TRACKS BY AS PS D AUD BUTTON AS PS button is assigned as Digital Audio Mode selection button in MP3 operation When pressed it is activated as selecting each mode of Digital Audio Searching track directly gt Searching Directory or File Name Navigation from root by TUNE TRACK UP DOWN buttons Navigation from current directory by TUNE TRACK UP DOWN buttons Searching Track Directly Press AS PS D AUD button for one time It enters into Searching track directly in Digital Audio CD The unit searches the track selected by following direct numeric buttons M1 M6 MOD 7 TUNE TRACK DOWN 8 TUNE TRACK UP 9 5 0 If selected three digits the unit searches the tract at once If selected one or two digits the unit wait for ENT BND LOU button for seconds The unit searches the track after few seconds even if the enter button is not pressed Searching Directory or File Name Press AS PS D AUD button for two times It enters into Searching Directory or File Name in Digital Audio CD The unit searches files and directories that have the same character which is inputted by the user pressing the corresponding buttons listed on the Table 1 below Explain as follows Use the corresponding buttons to select the characters A to Z blank 9 _ Press SEL button to confirm entry of each characters Press
33. select the directory or file in the directory by TUNE TRACK UP DOWN buttons The selected file can be played by pressing BND LOU ENT button DISPLAY INFORMATION Press DSP button to show following information such as the clock ID3 TAG if available song title directory name artist name other contents and other information KEY Assigned IN Searching mode Table 1 AS PS Mode Select BND LOU 1 2 3 4 5 M N O 5 Directory DOWN 6 P OTR G Directory UP OD STUF TUNE TRACK DOWN V W X 8 TUNE TRACK R Y Z SPACE 9 SEL CHARACTER SHIFT RIGHT U D AUDIO CHARACTER SELECT KNOB A B 8 9 0 AUDIO KNOB ENCODER amp TUNE TRACK UP DOWN buttons Searching file and directory during Navigation WMA OPERATION The unit that can play the WMA disc and the operation is the same with MP3 operation described above USB PLAY OPERATION In the front panel of the unit there is an USB interface 28 You can connect an USB driver through this interface 28 For the unit with no SD MMC interface when you connect an USB driver through the interface the unit will search the MP3 files or WMA files in the USB driver and start to play files or WMA files automatically If in other mode you can also press MOD button to select USB mode Operation When playing the MP3 files or WMA files in the device the operation is the same with the MP3 operation described above Not
34. sistance feel free to call us at 800 488 8595 and ask for the Technical Department Be sure to have the model number date of purchase and invoice number available when you call The model number can be located on the outside of the carton Record this in the space provided below along with the date of purchase It is a good idea to keep your receipt with this as you will need it in the case of a warranty repair or exchange Model Number Date of Purchase E g BE E E BE DNE BS S Table of Contents se 111111111111111111 22220 4 13 Take out screw before installation 4 Previewing all tracks 12 DIN Front Mount Method A 4 Repeating the same track 13 the 4 Playing all tracks in random 13 Removing the 5 ee i 229995 uff TO DIN Rear Mount Method B 6 age ee 13 Using the detachable front panel 7 Switching to CDC mode 13 8 Selecting 4 1 9 Operatior 9 PRausinoielsyiag Wi 13 Location 8 Previewing all tracks 166 Switching on off the unit 10 Repeating individual tracks or Faceplate release 10 wee GDS
35. t again to cancel the function SELECTING DISC Press CD v button 24 to select previous disc and CD a button 25 to select next disc EN Operation MP3 OPERATION SWITCHING TO CD MP3 MODE If there is no MP3 disc inserted in the driver Gently insert the MP3 disc with the printed side uppermost into the disc slot 5 until you feel some resistance The MP3 disc is drawn into the driver automatically The MP3 playback begins If a MPS disc is already inserted in the driver Keep pressing MOD button 6 shortly until the CD MP3 mode display appears SELECTING TRACKS IN SINGLE STEP Press TUNE TRACK i button 16 or TUNE TRACK button 17 to move to the previous track or the following track Track number shows on display SELECTING DIRECTORY UP DOWN Press M5 button 24 or M6 button 25 to select directory downward or upward If the MP3 disc does contain any directory there is no function of pressing M5 button 24 or M6 button 25 PAUSING PLAYING Press PAU button 20 to pause MP3 player Press it again to resume play PREVIEWING ALL TRACKS Press SCN button 21 to play first several seconds of each track on the current disc Press again to stop intro and listen to track REPEATING THE SAME TRACK Press RPT button 22 to continuously repeat the same track Press it again to stop repeat PLAYING ALL TRACKS IN RANDOM Press SHF button 23 to play all tracks on MP3 disc in rand
Download Pdf Manuals
Related Search