Aube Technologies Aube TI062 User's Manual
Contents
1. Description of Controls The timer is rainproof when held in the upright position using the support Light sensor The LED illuminates when power is applied to the controlled appliance Navigation and adjustment buttons Press briefly to apply or cut power to the controlled appliance Press for 3 seconds to enter or exit the setup menu Setting the Mode of Operation You can set the timer in any of the following modes h Manual mode Automatic mode default mode sk 6 Automatic mode with temperature threshold 6 gt Automatic mode with darkness threshold D Sunset sunrise mode To switch mode use the programming menu For example to switch from Automatic mode to Manual mode T1062 T1062 Installation and User Guide Programmable Multi purpose Timer Hold the On Off button for 3 seconds to on enter the menu The Mode menu will I2 0G flash Gah ER o Se Press the On Off button briefly The Z current mode will flash on the screen e oqo Ue mme Peo L A Dt Press the button repeatedly until the desired mode flashes on the screen 00 Mode AKODE Hold the On Off button for 3 seconds to pr exit the menu Pa Q Ute Ce y Off 7 19 NNan NOTE The timer automatically returns to its 12 08 normal display if you do not press any button for 60 seconds 4 1 Manual mode 4 The timer operates like a regular switch It applies or cut power to the applian2. to set the minutes for the MIZ Mode Time Prog ooy ae o MIZ Mode Time Prog program end time L EAR Press the On Off button to display the o Kee temperature format options The 7 selected format will flash Press the lo or of or gt button to switch format ey coe Press the On Off button to display the RS temperature threshold Press the or o gt button to display the desired a te threshold as 7 Hold the On Off button any time for 3 2ng IC UU seconds to exit the menu NOTE The timer automatically returns to its normal display if you do not press any button for 60 seconds T1062 Testing the Light Sensor To test if the light sensor is working properly Place the timer in automatic mode with darkness threshold or in sunset sunrise mode Position the timer such that it be exposed to daylight Check that the icon flashes to indicate the sensor has detected light Place your finger on the sensor Check that the icon stops flashing after approximately 40 seconds to indicate the sensor has not detected light Remove your finger o0 OO 00 Check that the icon resumes flashing after approximately 40 seconds Reset to Factory Settings To return to factory settings simultaneously press both On Off and buttons and hold The software version will appear for 5 seconds RST will appear for the next 5 seconds Release the buttons only when all segme
3. 358 4600 ao Toll free 1 800 831 AUBE Fax 450 358 4650 Email aube service honeywell com For more information on our products go to www aubetech com 400 062 000 B 2008 07 04 2 2
4. ce when you press the On Off button 4 2 Automatic mode 5 The timer applies and cuts power to the appliance at the desired times by means of a program Power is applied at the start of the program and is cut at the end of the program By default the program starts at 6 00 pm and ends at 11 00 pm see section 6 on how to set the start program time and end program time 4 3 Automatic mode with temperature threshold s 5 When the timer is plugged to an outdoor outlet this mode is used to activate an appliance such as an engine block heater or gutter heating cables when the temperature drops Heating starts when both following conditions are met e The program has started e The temperature threshold is reached see the different temperature threshold options in the following table The icon flashes when the threshold is not reached See section 6 for program setting and temperature threshold selection Temperature Threshold 12 C 10 F default 6 C 21 F 3 37 F Recommended Applications gas engine block heaters diesel engine block heaters gutter heating cables Heating will stop at the end of the program or when the temperature rises above the threshold by a few degrees However heating will resume if the temperature drops again before the end of the program CAUTION Do not use the timer for temperature control applications 4 4 Automatic mode with darkness thres
5. d technologies Applications The T1062 timer can be used indoors and outdoors to control lighting motors and block heaters The timer provides 5 modes of operation Mode Ideal for indoor and outdoor lights at set times swimming pool pumps Automatic mode Automatic mode with e engine block heaters temperature threshold gutter heating cables Automatic mode with darkness threshold outdoor lighting during the evening Sunset sunrise mode outdoor lighting during the night when you do not wish the controlled Manual mode i appliance to turn on or off automatically NOTE 1 Suitable for use with outdoor appliances Store indoors when not in use NOTE 2 To reduce the risk of electric shock the timer has a grounding type plug which has a third grounding pin This plug will fit only in a grounding type outlet If the plug does not fit in the outlet contact a qualified electrician to install the proper outlet Do not modify the plug in any way First Use Plug the timer in an electrical outlet before setting it for the first time The clock flashes to indicate that it must be set When the timer has been charged for at least 2 hours it can be unplugged for several minutes without losing the time The other settings are saved at all times The clock will still tick even if it is not set When this happens the on off times of the controlled appliance might be shifted
6. hold 5 D When the timer is plugged to an outlet exposed to daylight this mode is used to turn lights on at sunset and turn them off at a set time The lights turn on when both following conditions are met e The program has started see section 6 The darkness threshold is reached The icon flashes when the darkness threshold is not reached The lights will turn off at the end of the program NOTE Ensure that the timer is positioned such that the light sensor is pointing to an area that is undisturbed by car lights outdoor lights etc 400 062 000 B 2008 07 04 1 2 4 5 Sunset sunrise mode 5 When the timer is plugged to an outlet exposed to daylight this mode is used to turn lights on at sunset and turn them off at sunrise The lights turn on when the darkness threshold is reached The icon flashes when the darkness threshold is not yet reached When the timer will detect light the lights will turn off NOTE Ensure that the timer is positioned such that the light sensor is pointing to an area that is undisturbed by car lights outdoor lights etc 4 6 Temporary Override You can press the On Off button at any time to apply or cut power to the appliance If you derogate from the state in which the timer is supposed to be the new state On or Off will flash to show that it is temporary The override remains in effect until you press the On Off button or until the start of the next on or Off time Se
7. nts appear on the screen The timer is now reset Power Outage During a power outage the screen is blank If the outage lasts more than 4 hours at 25 C 77 F when power will be back the clock will be reset 0 00 and will start ticking again Therefore the timer can still apply or cut power to the controlled appliance however the on off times will be shifted Technical Specifications Supply 120 VAC 60 Hz Maximum load 15 amps 1 HP Operating temperature 40 to 50 C 40 to 122 F NOTE The display is illegible below 20 C 4 F Charging time minimum of 8 hours Data protection Most settings are saved at all times Only the clock must be set if the timer was without power for more than 4 hours at 25 C 77 F Program 1 on setting and 1 off setting The same settings are repeated every day Approval UL c UL us V Warranty AUBE warrants this product excluding battery to be free from defects in the workman ship or materials under normal use and service for a period of three 3 years from the date of purchase by the consumer If at any time during the warranty period the product is determined to be defective or malfunctions AUBE shall repair or replace it at AUBE s option If the product is defective i return it with a bill of sale or other dated proof of purchase to the place from which you purchased it or ii contact AUBE AUBE will make the determination whether the
8. product should be returned or whether a replacement product can be sent to you This warranty does not cover removal or reinstallation costs This warranty shall not apply if it is shown by AUBE that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer AUBE s sole responsibility shall be to repair or replace the product within the terms stated above AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESS OR IMPLIED OR ANY OTHER FAILURE OF THIS PRODUCT Some provinces states or regions do not allow the exclusion or limitation of incidental or consequential damages so this limitation may not apply to you THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON THIS PRODUCT THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE WAR RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE THREE YEAR DURATION OF THIS WARRANTY Some provinces states or regions do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This warranty gives you specific legal rights and you may have other rights which vary from one province state or region to another Technical Assistance 705 Montrichard Avenue Saint Jean sur Richelieu Quebec J2X 5K8 ae Canada o Tel 450
9. tting the Clock Hold the On Off button for 3 seconds to enter the menu 12 00 Ic uu Press the gt button once The Time 1 menu will flash 3 sec Press the On Off button to display the Ae ma m time format options The selected OWN E format will flash Press the or gt L button to switch format O Mode tes Prog Press the On Off button The hour zis setting will flash Press the or gt button to set the hour Press the On Off button The minutes setting will flash Press the or gt button to set the minutes Hold the On Off button any time for 3 seconds to exit the menu S S NOTE The timer automatically returns to its an normal display if you do not press any Ie button for 60 seconds O Setting the Program and Temperature Hold the On Off button for 3 seconds to enter the menu 12 00 Press the button twice The Prog g menu will flash 3 sec Press the On Off button The hour setting will flash Press the or gt button to set the hour for the program start time Press the On Off button The minutes o setting will flash Press the or gt 1 button to set the minutes for the program start time Press the On Off button The hour setting will flash Press the or gt button to set the hour for the program F end time 5 Press the On Off button The minutes setting will flash Press the or gt 7 button
Download Pdf Manuals
Related Search