ATD Tools ATD-3060 User's Manual
Contents
1. ATD 3060 11 PC LOCKING WHEEL NUT REMOVER INSTRUCTION MANUAL o wd Stripped Corvette amp GM GM Hubcap Locks 18mm Nuts Wheel Locks 1 Position socket over lock to be removed 2 Insert socket installing driver into center broach and drive socket onto lock by firmly hitting driver with large hammer 3 Remove socket with 1 2 extended driver or breaker bar NOTE SOCKET INSTALLING DRIVER MUST BE USED TO SET THE SOCKET ON THE NUT HAMMERING THE ENDS OF THE SOCKET WILL DAMAGE THE TOOL AND VOID THE WARRANTY NOTE Use EXTRACTOR PUNCH to knock the lock out of the socket SOCKET INSTALLING DRIVER EXTRACTOR PUNCH ERE REIS LARGE DUAL SIDED SOCKET f mg Aftermarket k GM Wheel Locks Wheel Locks GM Hubcap Locks Oversized Wheel Locks 1 Position socket over lock to be removed 2 Insert socket installing driver into center broach and drive socket onto lock by firmly hitting driver with large hammer 3 Remove socket with 1 2 extended driver or breaker bar NOTE FOR AFTERMARKET STYLE WHEEL LOCKS IT MAY BE NECESSARY TO USE A 1 2 DRIVE IMPACT GUN WITH EXTENSION TO SPIN THE SOCKET OVER THE LUGNUT TO BE REMOVED FOR ABOUT 5 SECONDS AT HIGH SPEED IN A COUNTER CLOCKWISE DIRECTION REMOVE THE IMPACT GUN AND RESET THE SOCKET WITH THE DRIVER REPLACE THE IMPACT GUN AND AT HIGH SPEED SPIN THE LOCK OFF INA COUNTER CLOCKWISE DIRECTION NOTE SOCKET INSTALLING DRIVER MUST BE USED TO SET THE SOCKET ON THE NUT2. CHRYSLER CYLINDER Chrysler Wheel Locks 1 Tap cylinder over hubcap lock 2 Remove lock with a 3 4 socket NOTE Use extractor punch to knock the lock out of the cylinder WARNING EYE PROTECTION MUST BE USED WHEN USING THESE TOOLS ATD 3060 0000 O 6 PRT3060 06_ _ FORD CHRYSLER CYLINDER _ _ 8 Co
3. HAMMERING THE ENDS OF THE SOCKET WILL DAMAGE THE TOOL AND VOID THE WARRANTY NOTE Use EXTRACTOR PUNCH to knock the lock out of the socket WARNING EYE PROTECTION MUST BE USED WHEN USING THESE TOOLS DUAL SIDED TWIST SOCKET LUGNUT REMOVER 1 To remove damaged or rounded lugnut lugbolt simply place the twist socket lugnut remover over the fastener and turn with a 1 2 drive impact breaker bar or other related tool NOTE Use EXTRACTOR PUNCH or Vice Grips to remove the damaged fastener out of the twist socket lugnut remover GM HUBCAP LOCK REMOVER Qi lp GM Hubcap Locks 1 Tap lock over hubcap lock 2 Remove lock with 3 4 socket NOTE DONOT USE IMPACT GUN WITH THIS TOOL GM SPLINE HUBCAP LOCK REMOVER EZ GM Spline Locks 1 To remove GM Spline style hubcap locks use side b 2 Rotate dual nipple studs around sprocket teeth until the two studs slide and lock onto hubcap lock Remove hubcap lock with 3 4 wrench CAUTION DO NOT USE AN IMPACT GUN OR EXCEED 20FT LBS OF TORQUE WHEN USING THIS TOOL To remove GM triangle drive hubcap locks use the 3 4 hex side 4 Insert hex nut side a into triangle well of hubcap lock Rotate lock off with 3 4 wrench FORD CHRYSLER CYLINDER 0 0 Ford amp Chrysler Hubcap Locks 1 Tap cylinder over hubcap lock 2 Remove lock with a 3 4 socket NOTE Most pre 1983 Chrysler hubcap locks can be removed with the GM hubcap lock remover LARGE
Download Pdf Manuals
Related Search