ATD Tools ATD-5582 User's Manual
Contents
1. ATD 5582 PRO LASER PHOTO TACHOMETER OPERATION MANUAL TABLE OF CONTENTS bee PEAT URES ines ERS 4 1 1 7 1 3 PHOTO TACHOMETER 9 1 3 2 Measuring Procedure 0 0 2 3 3 Very Low RPM Measurement 2 4 MEMORY FUNCTION 3 FEATURES a The 332 is a precision RPM measuring instrument This tachometer features durable long lasting components and a strong yet light weight double mold plastic housing The housing has been ergonomically shaped to fit comfortably in either hand This tachometer uses a micro processor CPU photoelectrical technology and junction Laser technology to precisely measure rotation RPM This instrument can take measurements in both PHOTO TACH mode RPM and TOTAL TOT counting mode Wide measuring range from 0 to 99 999 RPM High resolution highly visible backlit digital LCD display Memory function will recall Max reading Min reading and Last recorded reading During operation these readings will be automatically stored in memory and can be displayed pressing MEMORY CALL BUTTON Low battery voltage indication 2 SPECIFICATIONS Display Accuracy Sampling Time Range se2. measuring very low RPM values below 120 RPM you should attach addittonal REFLECTIVE MARKS Then divide the reading shown by the number of REFLECTIVE MARKS to get the real RPM 4 MEMORY FUNCTION 4 1 Readings obtained during operation of the photo tachometer are automatically memorized The following readings can be recalled from memory once the MEAS measure BUTTON is released 1 Max value 2 Min value 3 Last value Please see Figure 1 Max value Display Reading Min value Fig 1 Measunng time 4 2 Memorized values be recalled to the display as follows A Push the Mem button to display the maximum value letters will appear on the display along with the maximum RPM Push the Mem button again to display the minimum value letters Min will appear on the display along with the minimum RPM C Push the Mem button again to display the last recorded value The word Last will appear on the display along with last recorded RPM 5 When it is necessary to replace the battery battery voltage less than approx 4 5 will appear on the display B Remove the screw slide the battery cover away from the instrument and remove the battery C Install one 9 Volt batteryinto the battery compartment WARNING Permanent damage to the Circuit may result from incorrect installati
3. lect Memory Detecting Distance Time base Power Consumption Battery Operation Temp Dimension Weight 5 digits LCD Display 16mm 0 77 LCD 0 05 1 digit 0 5 sec over 120 RPM Auto Ranging Max Value Min Value Last Value 50mm to 500 mm Quartz crystal Approx 50mA 9 Volt Battery 0 50 160x58x39mm 151g including battery 3 PHOTO TACHOMETER Test Range 2 5 to 99 999 RPM r min Resolution 0 1 RPM 2 5 to 999 RPM 1 RPM over 1000 RPM Total Test Range 1 99 999 RPM 3 REFLECTIVE MARK Cut and peel adhesive tape provided into 12mm 0 5 squares approximately thumbnail size and apply one square to the rotation shaft a The non reflective area must always be duller than the reflective mark tape b Ifthe shaft is normally reflective it must be covered with black tape or black paint before attaching reflective tape Shaft surface must be clean and smooth before applying reflective tape 3 2 MEASURING PROCEDURE Apply a piece of reflective tape to the object being measured A thumbnail sized piece is recommended Depress the MEASURE BUTTON and align the visible light beam with the target reflective tape Verify that the MONITOR INDICATOR symbol 9 is displayed after the light beam aligns with the target reflective tape When this symbol 15 displayed the tachometer is receiving a good reflection from the tape and accurate measurements can be taken 3 5 VERY LOW RPM MEASUREMENT If
4. on D If the instrument is not to be used for extended periods of time remove batteries just to be safe 5 1 SUGGESTED BATTERY REMOVAL If the instrument will not be used for any extended period remove batteries to provent damaging corrosion For after sale service please send instrument to Electronic Specialties Inc 139 Elizabeth Ln Genoa City 53128 Phone 262 279 1400 Fax 262 279 1300
Download Pdf Manuals
Related Search