ATD Tools ATD80010 User's Manual
Contents
1. Lo 23 4 25 lt 22. THE AHBER LIGHT ATD 80010 ATD 80012 ATD 80014 amp ATD 80016 Retractable Reel Installation and Operating Instructions Installation Instructions for Table or Bench Mount 1 Choose a dry location within 2 feet of a 120 volt electrical outlet 2 Mount bracket directly into table or Bench figure A 3 Insert reel into bracket use care to line up the mounting holes figure B 4 Secure reel to bracket using the 8 pin figure B 5 Once pin is fully inserted secure 8 pin with cotter pin figure B 6 Adjust ball stop so T Tap or light head hangs at your desired length 7 Plug power cord into your 120 volt electrical outlet Installation Instructions for Wall Mount 1 Choose a dry location within 2 feet of a 120 volt electrical outlet 2 Mount bracket directly into wall stud figure A leaving a minimum of 24 between the reel and the outside edge of the wall or door frame DO NOT MOUNT REEL TO DRYWALL OR ANY UNSUPPORTED WALL MATERIAL DIRECTLY 3 Insert reel into bracket use care to line up the mounting holes figure B 4 Secure reel to bracket using the 8 pin figure B 5 Once pin is fully inserted secure 8 pin with cotter pin figure B 6 Adjust ball stop so T Tap or light head hangs at your desired length 7 Plug power cord into your 120 volt electrical outlet Installation Instructions for Ceiling Mount 1 Choose a dry location within 2 feet of a 120 volt electrical outlet 2 Mount bracket directly
3. rating of the tool or appliance that you are using before connecting anything to the outlet s on this product to be sure that you are not overloading the circuit The amperage rating of this reel can be found on the label on the reel itself If the circuit breaker blows unplug all devices and re set the circuit breaker Double check the amperage rating of your device before plugging it back in e Do NOT service this reel light while it is plugged in It may cause electrical shock e Opening reel may cause injury Unit has a tightly wound clock spring for retraction Made in China to ATD Tools Inc Specifications 2 PRTBOOI202 3 2 8 80012 03 Black __5 PRTBOO12 06 small _______ __ 6 2818001206 inner protecter 7 PRTBO012 07 large 8 PRT80012 08 ___ Lef 9 PRT8001209 Handle Right 80012 LIGHT Rivet 93 16 Housing upper 2 PRTB0016 02 Reelcover 3 PRT80016 03 Reelseat 5 __ 0016 05__ _ 65 PRTB0016 06 ___ ____ 8 PRTB0016 08 Housing lower 9 PRT80016 09 Ratchet Pawl ________ _ __ ___ 0016 15_ __ __ __23 _ 001623_ Ring ATD 80012 REEL 25 PRT80016 29 ____ pieces 3 Connective wire black PRTBOO1E43 Circlip 44 ange wire 4 4
4. into ceiling joist beam of a reinforced ceiling figure A DO NOT MOUNT REEL TO DRYWALL OR ANY UNSUPPORTED CEILING MATERIAL DIRECTLY 3 Insert reel into bracket use care to line up the mounting holes figure B 4 Secure reel to bracket using the 8 pin figure B 5 Once pin is fully inserted secure 8 pin with cotter pin figure B 6 Adjust ball stop so T Tap or light head hangs at your desired length 8 Plug power cord into your 120 volt electrical outlet Figures amp are for general reference only Shown 15 the bench mount method Figure A Figure B Figure Operating instructions 1 Fully extend and lock cord in place before using 2 To lock pull cord to desired length SLOWLY let the cord retract back into the reel some until you hear a clicking sound Stop the cord from retracting when you hear the clicking sound Cord should now be locked in place If not repeat previous instructions 3 To retract cord pull cord out a few inches until you feel the reel pulling the cord from your hand DO NOT LET GO OF THE CORD WHILE IT IS RETRACTING Hold onto cord until it 15 completely wound into the reel Failure to do so may result in personal injury and or damage to the reel itself 4 To lock multi angle bracket into place pull looped spring loaded pin out set reel to desired angle and release looped spring pin to engage into one of the holes to lock it Cautions e Do NOT overload circuit Check the amperage
Download Pdf Manuals
Related Search