ATD Tools ATD-80133 User's Manual
Contents
1. ATD 80133 Instructions Features and Specifications 7 4V 1400MAh Li ion rechargeable battery twice the life expectancy compared to regular rechargeable batteries Cordless 30 super bright LED s provide long dependable service life Shatterproof and shock resistant protective tube Swivel hooks make this light easy to attach anywhere horizontally or vertically The ATD 80133 Saber Li lon Worklight provides an average runtime of 6 hours per charge 9V 500mA AC to DC adaptor can be used with110VAC power source OPTIONAL DC adaptor ATD 80131 can be used with your vehicles 12V power outlet Red light on adaptor indicates charging green light on adaptor indicated fully charged blue light on led board indicates low battery Overcharge and over discharge protection e Automatically shuts off soon after low battery indicator lights up Charging Instructions The battery is only 50 charged before shipping Fully charge your ATD Saber Worklight before use Be sure your ATD Saber Li lon Worklight is turned off as it will not charge while in use and then plug the AC charging unit into the wall and into the bottom of your ATD Saber Li lon Worklight The LED indicator on the wall charging unit will change from red to green when the ATD Saber Li lon Worklight is fully charged The blue indicator light on the LED board will come on when the battery is almost discharged giving you a few minutes of light left before the light goes2. completely out It will not fade out it will simply turn off The ATD Saber Li lon Worklight will need to be recharged when the blue indicator light on the LED board comes on Charging time for a full charge is approx 3 hours Be sure to only use the AC adaptor supplied or the DC adaptor optional with the light Use of any other 110VAC or 12VDC adaptor can cause battery damage The ATD Saber Li lon Worklight needs to be fully charged at least every 6 months to maintain the performance of battery Operating Environment e The ambient temperature range for working is 14 F 122 F 10 C 50 C The ambient temperature range for charging is 32 F 104 F 0 C 40 C Charging the battery at a lower or higher temperature range will damage the battery e Keep your ATD Saber Li lon Worklight away from heat sources e Keep your ATD Saber Li lon Worklight away from acids and alkalines e Avoid bumping or dropping your ATD Saber Li lon Worklight U S Patent Number D548 382 LED board replacement instructions e When repairing your ATD Saber Li lon Worklight do not allow any metal to come in contact with the internal battery pack or the PC board and its components Turn the ATD Saber Li lon Worklight off Remove end cap 2 from end of tube 3 using care not to crack the tube 3 Pull the LED PC board 8 from top of the tube 3 Disconnect the wiring connector from the LED PC board and reconnect it to a new PC board 8 Carefully sl
3. RING PART ITEM PART DESCRIPTION ORDERING PART ITEM PART DESCRIPTION _ _ _ PRT80133 06 Le 3LEADCONNECTIONWIRE PRT80133 08 8 30LEDPCB PRT80133 09 9 pp a ea nee
4. ide the PC board assembly 8 back into clear tube 3 and replace the end cap 2 The ATD Saber Li lon Worklight is NOT waterproof and is NOT intended to be used in showers saunas or any other potentially wet locations Keep the ATD Saber Li lon Worklight away from sinks tubs showers etc Retrieving ANY electrical appliance when they fall into the water can be fatal The ATD Saber Li lon Worklight is to be used for general indoor lighting It is NOT intended to be used in potentially hazardous locations such as near flammables or in explosive atmospheres Your ATD Saber Li lon Worklight has a built in automatic discharge shut off feature that prevents the battery from becoming fully discharged thus extending the battery life Your ATD Saber Li lon Worklight can be used when plugged into the AC adapter for recharging It will not recharge while it is in use however The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator U S Patent Number D548 382 ATD 80133 10 i ay w v a j CH 4 11 16 ee er ae 7 i d K ee 21 e ER l OPTIONAL not included Lan an an am av emm an emm am emm am emm em om am ORDE
Download Pdf Manuals
Related Search