Ariens 992240 User's Manual
Contents
1. 3 Inspect the three push nuts holding the arms to the air spring saddle One is found on the left side and two are on the right side Left Push Nut Right Push Nuts 4 If the push nuts are not seated properly use a forked pry bar or screw driver to push the nut into the correct position 5 Properly seated the push nut will be pressed against the lip on the shaft The following photograph shows the lip with the push nut removed Lip on shaft push nut removed lf a damaged air spring bellows or saddle is found the saddle assembly can be replaced using Air Spring and Saddle Kit p n 59212300 Standard warranty applies Dealers will be reimbursed 25 hour for each seat inspected by removing the cushion For more information contact Gravely Technical Service at 920 756 46882. Date 2 15 2013 No B 2102 GRAVELY Service Bulletin Ariens Company 655 W Ryan St Brillion WI 54110 www ariens com Product Family Pro Turn 400 Series Mowers Subject Air Ride Seat 04383700 Dealer Action Inspect and Correct as Necessary Serial Number Range Pro Turn 452 101 2005 101 187 Pro Turn 460 101 204 101 2020 992234 Pro Turn 460 101 412 10 2088 Pro Turn 460 Diesel 101 2059 Pro Turn 466 101 4053 10 4083 992240 Pro Turn 472 Diesel 101 2038 Ariens Company has discovered that push nuts used in the manufacture of air ride seats p n 04383700 may not have been properly seated In some cases improperly seated push nuts have come off allowing control arms attached to the air spring saddle to come loose leading to the saddle bending and damaging the air spring bellows Dealers are to inspect all unsold inventory in the model and serial number range listed above and correct if necessary 1 Check the Milsco serial number of the seat on an affected unit If the serial number of the seat is above 53 798950 then it is not necessary to do any further inspection Model and serial number tag is located on the lower back of the seat assembly Date 2 15 2013 No B 2102 2 If the Milsco serial number is 53 798950 or below remove the lower seat cushion Remove two 4 20 bolts under the front of the cushion Pull cushion up and forward to remove Remove two 1 4 bolts
Download Pdf Manuals
Related Search