APC NETBOTZ NBES0307 User's Manual
Contents
1. Se Use adhesive cable tie holders and tie wraps to secure the sensor cable Note NetBotz Smoke Sensor NBES0307 Installation Instructions 0 gt a 3 E Operation The Smoke Sensor LEDs function as follows e Both LEDs will blink simultaneously once every ten seconds during the power up sequence e The green LED will blink once every five seconds to indicate normal operation e The red LED will blink once every five seconds to indicate that the Smoke Sensor is out of sensitivity e The red LED will turn on when the Smoke Sensor reports an alarm state NetBotz Smoke Sensor NBES0307 Installation Instructions Ti Customer support and warranty information is available at the APC Web site www apc com 990 3377A N 01 2009 2009 American Power Conversion All rights reserved All APC trademarks are property of infastraxure American Power Conversion Other trademarks are property of their respective owners AAA Il WY ll APC2. by Schneider Electric NetBotz Smoke Sensor NBES0307 Installation Instructions protection for equipment in data center racks and enclosures only It is not to be WARNING The NetBotz Smoke Sensor is intended to provide supplementary AN used to protect structures or personnel Smoke Detector For complete safety installation operation and maintenance information refer to the I3 Series Installation and Maintenance Instructions on the System Sensor Web site www systemsensor com Q This Smoke Sensor includes a System Sensor model 4W B I3 Series Photoelectric Inventory ae LO Smoke sensor with 3 05 m 10 ft M4 x 8 pan head screw 2 M6 black plastic cup cable 1 washer 2 Smoke sensor bracket 1 M6 x 16 Phillips slot screw 2 M3 knurled thumb nut 2 Mo OOF Adhesive cable tie holder 5 M3 x 12 stud fastener 2 RJ 45 coupling 1 Installation Make sure you connect this sensor to a Sensor port on applicable NetBotz Caution products See your NetBotz product documentation for details Make sure you remove the orange protective cover shown in step three Caution Smoke detection is best when you install the sensor near the top of the enclosure The Note sensor occupies one U space You can extend the length of the sensor cable up to 30 5 m 100 ft using the Note RJ 45 coupling and standard CAT 5 cabling q egogquiee ecocguisee
Download Pdf Manuals
Related Search