American Standard Williamsburg 3770 User's Manual
Contents
1. Installation Instructions 3770 Williamsburg BAR SINK FAUCETS Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure that your installation proceeds smoothly please read these instructions carefully before you begin Certified to comply with ANSI A112 18 1M U S Patent No 5 819 789 M968935 Rev 1 1 INSTALL FAUCET CAUTION Insert faucet SHANKS 2 through holes of Sink Note Putty is not required unless mounting surface is uneven Place FAUCET 1 in position on Sink Assemble and tighten LOCKNUTS 3 from underside of Sink PUTTY IF REQUIRED INSTALLATION OF OPTIONAL METAL LEVER HANDLES Supplied with Faucet Thread PORCELIAN LEVER HANDLE 2 counter clockwise and remove INDEX BUTTON with MOUNTING ROD ASSEMBLY 1 HANDLE COLLAR 4 and O RING 5 Insert MOUNTING ROD ASSEMBLY 1 into METAL HANDLE 3 HANDLE COLLAR 4 and O RING 5 Thread HANDLE ASSEMBLY 6 into ball of HANDLE BASE 7 f Apply pressure to the MOUNTING ROD ASSEMBLY 1 while turning the HANDLE COLLAR 4 in order to tighten firmly MAKE WATER SUPPLY CONNECTIONS NOTE FLEXIBLE SUPPLIES OR BULL NOSE RISERS MUST BE PURCHASED SEPARATELY P Connect water supply to FAUCET SHANKS 1 with 1 2 IPS FLEXIBLE m 1 SUPPLIES 2 or 3 8 0 D BULL NOSE RISERS 3 Use adjustable wrench to tighten connections Do not over tighten Be careful not to kink copper sup2. ply when bending Use tubing cutter to cut to proper length TEST INSTALLED FITTING With HANDLES 1 in OFF position turn on WATER SUPPLIES 2 and check all connections for leaks Remove AERATOR 3 Operate both HANDLES to flush water lines thorough Replace AERATOR 3 CARE INSTRUCTIONS n a COUPLING NUT FERRULE SERVICE To change direction of handle rotation proceed as follows a Turn valve to OFF position Pull out INDEX CAP and remove HANDLE SCREW Remove SPRING CLIP Lift STOP WASHER turn 90 and replace Replace SPRING CLIP Replace ADAPTER HANDLE SCREW and INDEX CAP AERATOR may accumulate dirt causing distorted and reduced water flow Remove AERATOR and rinse clean If spout drips operate handles several times from OFF to ON position Do not force handles turn only 90 ALIGN HANDLES Pull out INDEX CAP 1 and remove HANDLE SCREW 2 HANDLE 3 and ADAPTER 4 Push ADAPTER 4 on VALVE STEM 5 Find correct position of HANDLE 3 by adjusting male teeth on ADAPTER 4 to female teeth on HANDLE 3 Replace HANDLE SCREW 2 and push in INDEX CAP 1 DO SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER DRY WITH A SOFT COTTON FLANNEL CLOTH DO NOT CLEAN THE PRODUCT WITH SOAPS ACID POLISH ABRASIVES HARSH CLEANERS OR A CLOTH WITH A COARSE SURFACE M968935 Rev 1 1
Download Pdf Manuals
Related Search