American Standard Seva T480.507 User's Manual
Contents
1. first turn off water supply then m Remove HANDLE 1 CAP 2 and CARTRIDGE 4 Clean inlets and MANIFOLD 5 E Reassemble CARTRIDGE 4 alternately tightening SCREWS 3 E Replace CAP 2 and HANDLE 1 Check flow CARE DO SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER DRY WITH A SOFT COTTON FLANNEL CLOTH DO NOT DO NOT CLEAN THE PRODUCT WITH SOAPS ACID POLISH ABRASIVES HARSH CLEANERS OR A CLOTH WITH A COARSE SURFACE M9686982. Keep Sa ear ERA 1 until it can be removed from the HOUSING 2 INSTALL HOUSING mM Slide HOUSING 2 onto SHOWER QAM 3 a A E Tighten SHOWERHEAD 1 with an adjustable wrench Do not over tighten TEFLON TAPE INSTALL HOUSING TO SHOWER HEAD E Install HOUSING 2 onto SHOWER HEAD 1 Thread HOUSING 2 counter clockwise to install onto SHOWER HEAD 1 Hand tighten only MS68698 3 ADJUST HOT LIMIT STOP HOT LIMIT SAFETY STOP ADJUSTMENT By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold the HOT LIMIT SAFETY STOP reduces risk of accidental scalding To set the maximum hot water temperature of your faucets all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP E Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP 1 Follow Step A or B to adjust min max discharge temperature O being the hottest to 7 the coldest temperature setting Factory set at O A y A ADJUSTMENT WHEN WATER IS TOO HOT TEMPERATURE SETTING NUMBERS PRY RED RING FORWARD AND ROTATE N T COUNTER CLOCKWISE ONE CLICK B ADJUSTMENT WHEN WATER IS TOO COLD PRY RED RING FORWARD AND ROTATE CLOCKWISE t B RED RING HOT LIMIT SAFETY STOP m f faucet drips operate handle several times from off to on Do not apply excessive force m Clogged CARTRIDGE 4 inlets may cause reduced flow in full on hot or cold To clean inlets
3. Ambricam Standard Installation Instructions Seva T480 508 BATH AND SHOWER TRIM KITS T480 507 Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure that your installation proceeds smoothly please read these instructions carefully before you begin Certified to comply with ANSI A112 18 1 U S Patent No D403 750 M968698 RECOMMENDED TOOLS i AQ Phillips Screwdriver Flat Blade Screwdriver P Adjustable Wrench Soe Plumbers Putty or Caulking Teflon Tape ROUGHING IN DIMENSIONS m FOR REFERENCE ONLY pe TO 3 1 4 1 2 NPT OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 65 AND 78 74 FOR HEAD CLEARANCE 7 5 8 REF TOP OF TUB RIM 1 2 COPPER ge BOTTOM OF TUB INSTALL TRIM Remove PLASTER GUARD 1 Push CAP 2 on valve place ESCUTCHEON 3 and attach with SCREWS 4 Install HANDLE 5 by pushing it onto CARTRIDGE STEM 6 and tightening SET SCREW 7 from below E Install SHOWER ARM 8 with FLANGE 9 Install SHOWER HEAD 10 See Step 2 Check proper operation of HANDLE 5 and DIVERTER SPOUT 11 INSTALL SHOWER HEAD ASSEMBLY REMOVE SHOWER HEAD FROM HOUSING gm Hold SHOWERHEAD 1 with one hand and HOUSING 2 with the other as illustrated E Rotate SHOWERHEAD 1 clockwise while holding HOUSING 2 stationary NOTE The thread connection is a left hand thread
Download Pdf Manuals
Related Search