American Standard Princeton T508.990 User's Manual
Contents
1. Installation Instructions DECK MOUNT TUB FILLERS T508 990 PRINCETON DIVERTER amp PERSONAL SHOWER TRIM KITS with EverClean Finish Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets EverClean Finish Certified to comply with ANSI A112 18 1 U S Patent No D403 750 One wipe effortlessly removes spots Eliminates the need for cleaners and scrubbing M968842 REV 1 1 e Permanent surface protectant remains beautiful for the life of the faucet e EverClean available on Polished Chrome Satin Nickel Stainless Steel Polished Brass or any combination of these finishes To ensure that your installation proceeds smoothly please read these instructions carefully before you begin INSTALL HANDLE ADAPTER Remove DIVERTER GUARD 1 from valve Place the ESCUTCHEON SEAL 7 into groove of DECK ADAPTER 2 Align the HANDLE STEM 3 with the SLEEVE 4 as necessary Thread the HANDLE ADAPTER 5 into the VALVE BODY 6 until the DECK ADAPTER 2 contacts tight against the finished mounting surface INSTALL HANDLES Turn VALVE STEM 2 fully clockwise Tub fill position Push ADAPTER 1 on VALVE STEM 2 so that the hole of the THREAD ON ADAPTER 1 without a spline is facin i See figure A Tighten ADAPTER STEM SCREW 3 to secure ADAPTE TOP Find correct position of LEVER HANDLE ASSEMBLY 4 by adjusting male teeth on ADAPTER 1 to female2. e to check HANDSHOWER 2 and HOSES 3 for leaks With DIVERTER VALVE 1 in counter clockwise position flow should only come from HANDSHOWER 2 Turn control valves off EverClean Finish Care Instructions American Standard s EverClean finish will wipe clean with a soft dry cloth A soft cloth with clean water may also be used if desired No additional cleaning products are required DO NOT USE Soaps acid polish abrasives harsh cleaners or a cloth with a coarse surface MS6884e2 REV 1 1
3. teeth in HANDLE 4 Thread LEVER HANDLE ASSEMBLY 4 onto DECK ADAPTER 5 until snug against mounting surface Figure A SPLINE END DOWN j INSTALL HAND SHOWER Unscrew the HOLDER 1 from the SHOWER ESCUTCHEON 2 Slip the SHOWER HOSE 3 through the SHOWER ESCUTCHEON 2 and the HOLDER 1 Pull out the SLEEVE GUARD 6 and HOSE 7 Unthread the SLEEVE GUARD 6 from the HOSE END 8 connection Be careful not to allow the HOSE 7 to fall back through the SLEEVE 9 Insert SEAL WASHER 10 into the SHOWER HOSE CONNECTOR 11 Thread the SHOWER HOSE CONNECTOR 11 onto the HOSE END 8 and tighten securely Thread the SHOWER ESCUTCHEON 2 into the SLEEVE 9 until the SHOWER ESCUTCHEON 2 contacts the finished deck Loosen the SET SCREW 12 in the SHOWER ESCUTCHEON 2 and rotate the ESCUTCHEON 2 so that SET SCREW 12 faces the center of the tub Retighten the SET SCREW 12 Thread the HOLDER 1 into the SHOWER ESCUTCHEON 2 Insert a SEAL WASHER 4 into the SHOWER HOSE CONNECTOR 5 and hand tighten HAND SHOWER 13 into SHOWER HOSE CONNECTOR 5 Place the HAND SHOWER 13 into the HOLDER 1 Turn DIVERTER VALVE 1 fully clockwise Tub fill position Turn on control valves and check all connections for leaks With DIVERTER VALVE 1 in clockwise position flow should only come from tub spout Lift HANDSHOWER 2 from holder direct spray into tub turn DIVERTER VALVE 1 fully counter clockwis
Download Pdf Manuals
Related Search