American Standard 7010.23 User's Manual
Contents
1. MOUNTING BRACKETS 1 to wall Use MOUNTING BRACKET 1 as a template and mark the mounting holes Drill three 1 8 diameter holes a minimum of 1 1 4 deep Insert the three ANCHORS 4 flush with face of the finished wall Secure MOUNTING PLATES 1 to wall with SCREWS 2 CENTER LINE POSITION OF us ere AND ROBE HOOK um DRILL 3 PILOT HOLES FOR WOOD SCREWS 2 OR 1 8 DIA HOLES FOR ANCHORS 4 POSITION OF MOUNTING BRACKET FOR DOUBLE ROBE HOOK AND TISSUE HOLDER 2 TOWEL RING INSTALLATION Wi Align accessory A B and place ESCUTCHEON 1 onto MOUNTING BRACKET 2 Secure accesory with SET SCREW 3 using 2 5mm HEX WRENCH 4 supplied NOTE POSITION OF MOUNTING BRACKET POSITION OF MOUNTING BRACKET FOR TOWEL RING AND ROBE HOOK I I 1 1 1 N 3 ROBE HOOK AND TISSUE HOLDER INSTALLATION B6 Align accessory C D and place ESCUTCHEON 1 onto MOUNTING BRACKET 2 Secure accesory with SET SCREW 3 using 2 5mm HEX WRENCH 4 supplied NOTE POSITION OF MOUNTING BRACKET POSITION OF MOUNTING BRACKET FOR DOUBLE ROBE HOOK AND TISSUE HOLDER M968630 Rev 1 12. Yimerizae Standard Installation Instructions GREEN TEA ACCESSORIES 204g ien TOWEL RING 7010 211 ROBE HOOK 7010 230 DOUBLE ROBE HOOK TISSUE HOLDER Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure that your installation proceeds smoothly please read instructions carefully before you begin Certified to comply with ANSI A112 18 1 M968630 Rev 1 1 Recommended Tools p CARE INSTRUCTIONS z DO SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR E WATER DRY WITH A SOFT COTTON FLANNEL CLOTH 3 DO NOT CLEAN THE PRODUCT WITH SOAPS ACID POLISH ABRASIVES HARSH CLEANERS OR A CLOTH Phillips Screwdriver WITH A COARSE SURFACE TOWEL RING ROBE HOOK and TISSUE HOLDER MOUNTING BRACKET INSTALLATION The TOWEL RING ROBE HOOK and TISSUE HOLDER work best if secured to a wall stud or cross brace within the wall using 1 1 2 long SCREWS 3 not supplioed If the TOWEL RING ROBE HOOK and TISSUE HOLDER are to be installed on a tile or plaster wall the ANCHORS 4 and SCREWS 2 should be used Determine desired height and location optional for the accessory and mark a center line If MOUNTING BRACKET 1 is secured to a stud or cross brace drill small pilot holes for SCREWS 3 NOTE PROPER POSITION OF MOUNTING BRACKET FOR ACCESSORY TO BE INSTALLED For installations on drywall or tiled walls use ANCHORS 4 and SCREWS 2 for securing
Download Pdf Manuals
Related Search