American DJ S-150/DMX User's Manual
Contents
1. American OY User Instructions S 150 DMX 150 WATT High Power Professional Strobe Light CAUTION Read instructions before installing or plugging unit in SPECIFICATIONS MODEL S 150 DMX Weight 9lbs Size 3 25 x 9 25 x 9 5 Lamp ZB 150 BT 200H Fuse 10A Internal Supply Voltage 120V Working Position Any Safe position Duty Cycle 5 min ON 5 min OFF Congratulations on your purchase of this high quality American DJ product For your convenience the S 150 DMX has been lamped and is ready to be used Please read the following instructions before installing or using your new S 150 DMX Thank you for pur chasing the S 150 DMX by American DJe CONTROLS amp FUNCTIONS REAR 1 POWER INPUT AC 120V 60Hz 10A 2 FUSE F10A 250V 2 3 POWER SWITCH Press down to turn the power on 4 POWER INDICATOR Indicates when power is on printed on the rear for desired speed and dimming settings Assign dip switch 10 to OFF this unit is in self test mode follow self test settings to select desire 3 4 9 6 8 6 DMX INDICATOR Indicates when DMX is effective 7 DMX SIGNAL INPUT XLR male socket use to receive DMX signals 8 DMX SIGNAL OUTPUT XLR female socket use to connect another S 150 DMX OPERATING INSTRUCTIONS Please confirm power input is matched with that specified on this unit Plug in power cord and turn the power on This unit has two operating modesL self test mode and DMX pac2. k mode Switch dip switch 10 to OFF position this unit is in self test mode There are two self test modes AUTO and MANUAL Set dip switch 9 to OFF it performs AUTO self test When strobe flashes within the dimming range from O to 100 and then from 100 to 0 a slower or faster speed will be executed This strobe will flash with the regular soeed correspon ding to the variety of the duration of dimmer Set dip switch 9 to ON it performs MANUAL self test Dip switch 1 2 3 and 4 are assigned to control speed and dip switch 5 6 7 and 8 are assigned to adjust dimming level 5 Switch dip switch 10 to ON position this unit is in DMX pack mode Follow DMX address settings printed on the rear for desired flash speed and dimmer 6 For safety disconnect power cable when not in use Affordable Quality Lighting Products from Awmexccau Do Los Angeles CA 90058 ROD APPENDIX 1 In DMX pack mode please refer to the following illustrations for desired channel setting OMX Address Table Dipswitch10 ON DMX Address Setting Switth 1 2 3 4 5 6 7 8 9 10 oh eh eked 2 In self test mode please follow the below table for desired chase Self test Dipswitch 10 OFF Ce ow fs om 1 8 RANDOM 3 In MANUAL of self test mode speed and dimmer are classified as 16 levels respectively and are as follows ON OFF Z z ao yd Aid Ai y AG eA WAAL AAA L
3. yi amp ALE AL HAS AS ABE A EE Cm
Download Pdf Manuals
Related Search