American DJ Quadra Force/Sys User's Manual
Contents
1. American DH User Instructions QUADRA FORCE SYS CAUTION Read instructions before installing or plugging unit in DO NOT mount near any flammable surface Operate in well ventilated area a u on r SPECIFICATIONS QUADRA FORCE HALOGEN LAMP WARNING Size 6 H x 11 5 W x 12 75 L which are highly susceptible to dam Lamp EXY 82V 250W age if improperly handled Never l l Weight 9lbs master 8lbs Slaves This fixture is fitted with halogen lamps l touch lamp with bare fingers as the oil l Fuse 10A GMA from your hands will shorten lamp life 4 Supply Voltage 120V Also never move fixture until lamp has 4 Working Position Any Safe position had ample time to cool Remember Colors Multiple Dichroic Colored lamps are not covered under warranty Moonflower Effect conditions Operating Instructions The Quadra Force SYS is designed to operate as a complete 4 unit lighting system consisting of 1 master and 3 slave units Each lightweight unit is a multi dichroic rotating moonflower effect projecting a different gobo in multiple beams of rich color The three slave units plug directly into the master to perform a sound activated chasing light show Verify Package Contents 1 Master Unit Equipped with three AC input jacks on the rear panel 3 Slave Units Each equipped with one AC input jack on the rear panel 8 Computer style AC cords of varied lengths Once the three slaves have been connected to the m2. aster plug the master unit into a standard 110V power supply Each unit has been lamped and is ready for operation Turn the knob on the rear panel of the master to adjust for the desired level of audio sensitivity Note If the audio sensitivity is turned all the way down or if there is no sound the units will not chase instead the effect will remain fixed on one unit which will cause overheating and damage to that unit To focus a unit loosen the two Phillips screws on the bottom panel which hold the lens in place Slide the lens forward or backward until you achieve proper focus Tighten screws Caution Never open unit when in use Always disconnect main power before serving or replacing lamp Always replace with same lamp and fuse Lamp Replacement Unplug the unit and allow it fo cool down Remove finger screw on the top panel and its attached door Remove the bad lamp from the socket and slide it up through the retaining clips Replace lamp being careful not to touch lamp with bare fingers Reassemble Please fill out and send the enclosed warranty card to ensure proper registration of this product Contact your authorized American DJ dealer for service AAmerican Doo Los Angeles CA 90058 USA
Download Pdf Manuals
Related Search