Amcor AHM8 User's Manual
Contents
1. screwdriver take the provided screw and secure the wheel set into place Example shown in Figure E Figure F displays the successful completion and the security of the completed wheel set The mobility of your new Amcor AMH 8 Portable heater is now complete and you are now free to move it around your room Fig E Fig F2. 00000000 Model AHM8 Wall Mountable Portable Heater WHEEL INSTRUCTIONS For more information please see the enclosed Owner s Manual or call 1 866 361 2233 or visit www amcorgroupusa com Installing Wheels Removing Wheels Make sure the unit is unplugged and cooled before taking the following steps Turn the unit over With a Phillips head screwdriver please remove the screw Please do not attempt removing the wheel sets out immediately they are locked into place by the looped inserts As shown in Figure G push the loops outward to remove them off the locked position This will then free the wheels so that you may remove them from the unit easily Make sure you place the wheel sets and screws in a safe place for future use Fig G As shown in Figure A the two wheel sets come with looped clips that snap into the unit Fig A Fig B Figure B displays the back of the unit where the wheel sets are set in place directly over the screw holes on the unit As shown in Figure C you must align the looped clips in the open slots bordering the hole set on the unit The wheel sets should then click in place as shown in Figure C as well NOTE The supported block side of the wheel sets aligns with the back side lip of the unit Fig C Figure D shows the successful completion of the aligned looped clips inserted into the open slots after they have clicked into place Fig D With a small Phillips head
Download Pdf Manuals
Related Search