Amana ASD2522WR User's Manual
Contents
1. 2 5 08 cm PRODUCT DIMENSIONS A A E D overall top of cabinet Handle and door style will vary with model inei Dimensions D and E mo include rollers extended 3 4 andle Depth Cab Width Door Width Cab Height Overall Height Model man BN on DH g ASD2522WR 31 3 8 35 1 2 35 7 8 68 7 8 69 3 4 79 7 cm 90 2 cm 91 1 cm 174 9 cm 177 2 cm To ensure proper ventilation for your refrigerator allow for 1 2 1 25 cm space on each side and at the top When installing your refrigerator next to a fixed wall leave 2 5 08 cm minimum on each side depending on your model to allow for the door to swing open If your refrigerator has a water dispenser and ice maker allow extra space at the back for the water line connections NOTE Do not install the refrigerator near an oven radiator or other heat source nor in a location where the temperature will fall below 55 F 13 C Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only For complete details see Installation Ref W10180388 our products we reserve the right to change materials and specifications without notice Instructions packed with product Specifications subject to change without notice 01 08 092. Amana Side by Side Refrigerator PRODUCT MODEL NUMBERS ASD2522WR Electrical A 115 Volt 60 Hz AC only 15 or 20 amp fused grounded electrical supply is required It is recommended that a separate circuit serving only your refrigerator be provided Use an outlet that cannot be turned off by a switch Do not use an extension cord NOTE Before performing any type of installation Cleaning or removing a light bulb turn the control Thermostat Refrigerator or Freezer Control depending on the model to OFF and then disconnect the refrigerator from the electrical source When you are finished reconnect the refrigerator to the electrical source and reset the control Thermostat Refrigerator or Freezer Control depending on the model to the desired setting Water A cold water supply with water pressure of between 30 and 120 psi 207 and 827 kPa is required to Operate the water dispenser and ice maker If you have questions about your water pressure call a licensed qualified plumber IMPORTANT The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi 207 and 827 kPa If a reverse osmosis water filtration system is connected to your cold water supply the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi 276 to 414 kPa LOCATION REQUIREMENTS 1 2 1 25 cm a IE
Download Pdf Manuals
Related Search