AFTCO SOFTWARE DRIVER AFT-ZPO User's Manual
Contents
1. Memory Stick Memory Stick PRO MagicGate Memory Stick xD Picture Card lt 200mA lt 500uA Up to 480 Mbps Via USB 2 0 Up to 12 Mbps via USB 1 1 Windows 98 SE Windows 2000 Windows ME No driver required Windows XP No driver required Mac OS 9 1 or later Mac OS X No Driver required Specifications are subject to change without further notice All trademarks trade names and copyrights are properties of their respective owners Does not operate with MagicGate Memory Stick in secure mode xD Picture Card is a trademark owned by Fuji Photo Film Co Ltd Limited Warranty 10 Atech Flash Technology Inc AFT warrants to the original end user Customer that under normal intended use AFT memory flash card readers will be free from defects in materials and workmanship for one 1 year from the date of purchase During warranty period AFT shall either repair or replace of defective product AFT shall not be liable for any losses or damages of any kind resulting from the use of AFT products or for any of Customer s data stored on products returned to AFT for service AFT accepts no liability for and provides no expressed or implied warranty against any loss of data or images You may register your product at http www atechflash com Customer must have proof of purchase and obtain warranty service authorization from AFT within the applicable warranty period before returning defective produ2. AFT ZPO User s Manual Software driver is required on Windows 98Se or Windows 2000 only Please perform driver setup prior to using AFT ZPO Atech Flash Technology Inc A www atechflash com Table of Content 15 POR zi o ZERO O SO OB 2 2 Package Contents 3 3 System Reguirements 3 A Installation Gu zatez 4 WoD fOr WINDOWS aid 5 6 6 Setup for Mac OS 7 8 Ko CCN NG ARRE EEEE EE 9 S VV ED eal esate zk za stado dod k Pak 10 lf you have questions regarding your AFT ZPO card readers Please contact our technical support hotline toll free USA only at 1 866 85ATECH 1 866 852 8324 or email us at techsupport atechflash com or visit our website at www atechflash com Features High Speed USB 2 0 interface up to 480 Mb s transfer rate to access to your flash media cards Backward Compatible to USB 1 1 interface can also be used on USB 1 1 ports USB powered built in USB Cable no additional cable power adaptor or battery required Fully Plug and Play No software driver needed on Windows ME XP or later Hot Swappable connect or disconnect reader without having to turn your computer off AFT ZPO 3 in 1 Compact Flash Type Compact Flash Type II IBM MicroDrive AFT ZPO 6 in 1 Memory Stick MagicGate Memory Stick Memory Stick Pro Secure Digital Card MultiMedia Card xD Picture Card Soft
3. cts to AFT Returned products must be shipped prepaid and packaged appropriately and it is recommended that they be insured or sent by a method that provides for tracking of the package Limitations This limited warranty is in lieu of all other warranties terms or conditions including warranties terms or conditions of merchantability fitness for a particular purpose satisfactory quality suppliers and in no event will AFT be liable for any special incidental consequential or indirect damages resulting from the possession use or failure of this product sH Atech Flash Technology Inc www atechflash com
4. e click the CD ROM icon in My Computer to browse the contents in the Setup Disc And then double click the Setup icon 3 Follow the on screen instructions to complete the software setup 4 At last restart the system Hardware Setup After completing device driver setup and restarting the system refer to the following instructions to install the AFT ZPO card reader 1 Connect your Card Reader with the USB cable into any available USB port of your computer 2 Your computer will automatically recognize the card reader and register new devices 3 One Removable Disk icon representing the socket will be added onto My Computer 4 The installation of your AFT ZPO card reader is now completed Using the AFT ZPO Software setup and hardware setup should be performed previously Insert supported media card into the socket of the card reader open My Computer and double click on the new Removable Disk icon then you can access the data in the media card The driver is requested if the system is under Windows 2000 SP3 WARNING DO NOT insert or extract media card while the LED is flashing Setup for Windows 6 Uninstall Software Should you feel necessary to remove the installed software and driver files of your card reader please refer to the following instructions 1 Unplug the card reader from USB port 2 Click START and then click PROGRAMS 3 On the AFT ZPO menu click on Remove AFT ZPO 4 Adialog box appear
5. s asking for your confirmation Click YES to continue 5 Software and driver files of your card reader will now be removed automatically After removing software and driver files you ll need to perform Software Setup and Hardware Setup before using your AFT ZPO card reader again Setup for Mac OS Lz You can skip this chapter if your system is Mac OS 10 1 3 Insert the Setup Disc into the CD ROM to the following instructions i Insert the Setup Disc into the CD ROM drive of your Macintosh computer Double click the CD ROM icon on the desktop then run the USB Reader Installer application the content of Read Me appears Click on Continue to proceed You can also find this file in the Setup Disc if you want to view it later on The Installer Dialog appears Select USB Reader Installer in the pop up menu and then click on the Install button to install the device driver A Warning Dialog will appear on the screen telling you that you should quit running applications before installation Click Continue button to start copying files Click Cancel button if you want to quit other running applications first After files are copying is completed the Restart dialog appears Click Restart button to restart the system or click Quit button to exit the installer SetUp for Mac OS 8 Hardware Setup Installing the AFT ZPO Card Reader to your system is easy After completing device driver installation and re
6. starting your system simply plug your Card readers USB cable into any available USB port on your Macintosh computer then the system will do the installation Now you may enjoy the ease of use and high access speed of the card reader on your Macintosh Using AFT ZPO Software setup and hardware setup should be performed previously Insert supported media card into the socket of the card reader a disk icon will appear on desktop Double click on the New Disk icon now you can access the data in the media card WARNING Remember to drag the disk icon representing the media card to the trash box before extracting the card from the card reader or unplugging the card reader from the USB port Uninstall Driver 1 When you intend to remove the installed driver files please repeat step 1 to 3 in Software Setup but in the installer dialog choose Uninstall in the pop up menu 2 Click Uninstall to remove driver files After uninstall a warning showing some files folder could not be deleted may appear Please click OK ignoring this message Specifications Dimension W x H x D Power Requirement Supported media format Operation Current Suspend Current Transfer rate Supported O S 3 03 inch x 51 inch x 2 16 inch 77 mmx 13 mmx 55 mm 5V DC 500mA USB Bus power AFT ZPO 3 in 1 Compact Flash Type Compact Flash Type II IBM MicroDrive AFT ZPO 6 in 1 MultiMedia Card Secure Digital Card
7. ware driver required on Windows 98SE 2000 Does not operate with MagicGate Memory Stick in secure mode xD Picture Card is a trademark owned by Fuji Photo Film Co Ltd Package Contents AFT ZPO Card Reader wi Setup Disc x 1 Users Manual x 1 System Requirements PC Hardware PC or Laptop computer with USB 2 0 support and complies with USB1 1 Software Microsoft Window ME 98SE ME 2000 XP Mac Hardware iMac series iBook series Power Mac G4 series Power Book series Power Mac G3 series Software Mac OS 8 6 or later versions iMac series require iMac Firmware 3 0 or later versions Installation Guide To use AFT ZPO Card Reader requires no setup just insert supported media card into the socket of the card reader and plug the USB cable into any open USB port then you will be able to read write to the media card Indicators An active LED indicator is used to display operation status of your card reader when used The blue LED lighting means the card reader is connected to system and the power is on The blue LED flashing means the card reader is reading or writing data in an inserted card WARNING Do not insert or extract media card while the LED is flashing Setup for Windows s You can skip this chapter if your OS is Windows ME 2000 XP Before connecting the card reader into USB port refer to following instructions to install the device driver 1 Insert Setup Disc into the CD ROM drive 2 Doubl
Download Pdf Manuals
Related Search