Adam Equipment MCW-250L User's Manual
Contents
1. O Adam Equipment Company 2008 5 4 0 SETTING UP THE SCALE The MCW 250L comes with a chair fitted on the scale platform There Is no assembly necessary attach the indicator to the bracket simply plug in the power supply and it is ready for use The indicator could be removed from the chair for mounting to the wall or used on a table top Brackets are avallable for wall mounting the indicator POWER SUPPLY The scale uses an internal re chargeable battery If the external power supply is to be used plug It into the jack on the indicator When the battery Is low a low battery symbol will be displayed In the left of the display Connect the adapter to recharge the battery 5 0 WEIGHING e Place the Scale on an even floor and press the On Off key e The instrument performs a self test after which It is ready for operation The display will show O O with an arrow symbol above kg or Ib indicating the last chosen unit e The arrow above Stab will be on when the reading Is stable o Press the On Off key to switch off the scale If the scale is not to be used for a long time the main power switch should be turned off to save the battery life e To start weighing press On Off the scale will show 0 0 O Adam Equipment Company 2008 6 e If the scale is still displaying a small weight when there is no load on the platform it needs to be zeroed Press the Tare Zero key to zero the display The arrow above Zero2. change from 0 to 9 no automatically power off function auto power off after 2 minutes auto power off after 4 minutes auto power off after 18 minutes X is increased by 2 minutes with each change When the desired time is displayed press Hold key to confirm If you wish to set the next parameter press the Hold key and enter the Zero setting If you dont wish to continue with the setting press the Func key to return to the weighing function 6 2 CALIBRATION 6 2 1 ZERO SETTING Press the Hold key to confirm and enter the zero setting mode When 000000 is displayed press the Hold key to confirm O Adam Equipment Company 2008 8 6 2 2 CAPACITY SETTING Press the Hold key to enter the calibration Simply place the calibration mass to set up Suggested value of the calibration mass is 50kg However for higher accuracy the calibration mass should be as high as possible maximum being 250kg Press the Func key to enter the same figures as the calibration mass used The display will show 000000 when the calibration is complete Press the Hold key to return to welghing function While setting use the keys as follows kg Ib key Triangular cursor moves left Tare Zero key Triangular cursor moves right Func key for figures setting 1 9 Hold key to confirm 7 0 TECHNICAL PARAMETERS The technical parameters are accessed by opening the scale and hence should be used only by the authori
3. will be on If the zero display is not achieved then the scale may need to be re calibrated e l the weighing value is to be tared to obtain the net value press Tare Zero again The arrow above Tare will be on e The person to be weighed can step on to the platform now The weight will be displayed in Kg or lb depending on the units chosen by the user e Units Press the kg lb key for changing the weighing unit to kg or Ib An arrow will indicate towards the chosen unit e Backlight The scale has an automatic back light which Is switched on whenever time the scale Is in use e Overload display When CP appears on the display it shows that the load on the platform Is over the maximum capacity lt is necessary to reduce the load otherwise the sensor or the platform may be damaged e Hold Function To lock the weighing result press the Hold key The arrow indicator will point towards Hold and it will show a steady reading even if the person on the platform Is moving or goes away from the scale and will not allow the next weighing To release the function press Hold again e Do not press the On Off key if you do not want to weigh as pressing the On Off key will switch the scale to ON O Adam Equipment Company 2008 7 6 0 USER PARAMETERS 6 1 AUTO POWER OFF Press Func and Tare Zero keys at the same time and display will show t x t time x digit 0 9 total 10 settings Press the Func key x will
4. che ADAM Adam Equipment MCW 250L DIGITAL CHAIR WEIGHER P N 6096 Revision B1 February 2008 Adam Equipment Company 2008 Adam Eguipment Company 2008 CONTENTS EO INTRODUCTION isli os o o r la a no 3 20 TECANIGALSPECIFIGATONS soka bludu is 4 3 0 DISPLAY AND KEY DESCRIPTIONS eee eee nene 5 LOU SES SA THE SCALE Sn dass cou dus 6 20 WEIRIN Costas le aloe e a le boue 6 60 USER PARAMETERS sat n er 8 61 AUTOFOWER ORE Se nes 8 02 CALIBRA FON cencia E no A 8 0 25 ZERO SETTING SES ne en un ro oo 8 012 2 CAPACITY SEINS a eine o domu 9 TO TECANICAL PARAMELTERO asociar 9 00 ERROR MESSAGES ndo ooo 10 20 WARNIN a o 10 Adam Eguipment Company 2008 1 Adam Eguipment Company 2008 1 0 INTRODUCTION e The MCW 250L scale is a Digital Physician Chair Scale which allows the patients to be weighed while seated e The scale has a capacity of 250 kg 550 lb and readability of 0 1 kg 0 2 lb It is fast accurate and simple to use e Main features of the scale are VV V V v V V V Large clear backlit LCD display Sealed keypad Very simple to use Weighing in Kg and Ib Swivel wheels to allow easy movement with foot brake Swivel foot and arm rests Push button tare Runs from an internal rechargeable battery or using an external power supply adapter HOLD function to lock the display till the operator releases it Automatic turn off to maximise battery life Filters optimised for welg
5. hing people O Adam Equipment Company 2008 3 2 0 TECHNICAL SPECIFICATIONS 250 kg 550 lb 0 1 kg 0 2 Ib LCD with 29mm 1 1 digits 650 x 880 x 970 mm w xd xh 25 6 x 34 6 x 38 2 Environment for use Temperature 5 C to 40 C 41 F to 104 F Humidity lt 85 RH Adam Equipment Company 2008 4 3 0 DISPLAY AND KEY DESCRIPTIONS 7 EBADAM n EB i AC sz T LU A kg ib Hold Tare Stab Zero Medical Scale A 43 Gare z max 250kg g d 100g i i s it Ik ja L A P ae m Tar s on On Off To turn the scale on or off To lock the reading even if the person to be weighed is moving Tare Zero To zero the scale if the display drifts from zero To tare the scale If necessary Func To set up the parameters Also used to switch on the backlight kg Ib To toggle the weighing unit between kg and lb DISPLAY DESCRIPTIONS The arrow above Zero will be displayed when the scale reaches zero KEYS FUNCTIONS Stab To indicate that the weighing result is stable To indicate the scale is tared This indicates the Hold function is enabled Ib Toindicate the reading is in lb kg To indicate the reading is in kg The arrow indicator will point at kg Ib Hold Tare Stab or and Zero marked below the LCD panel as on when they are chosen AC When the adapter is connected to recharge the battery it will show a red indicator
6. pment Adam products are predominantly designed for the Laboratory Educational Medical retail and Industrial Segments The product range can be described as follows Analytical and Precision Balances Compact and Portable Balances High Capacity Balances Moisture analysers balances Mechanical Scales Counting Scales Digital Weighing Check weighing Scales High performance Platform Scales Crane scales Medical Scales Retail Scales for Price computing For a complete listing of all Adam products visit our website at www adamequipment com Copyright by Adam Equipment Co Ltd All rights reserved No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment Adam Equipment reserves the right to make changes to the technology features specifications and design of the equipment without notice All information contained within this publication is to the best of our knowledge timely complete and accurate when issued However we are not responsible for misinterpretations which may result from the reading of this material The latest version of this publication can be found on our Website www adamequipment com Adam Equipment Company 2008
7. sed technicians Move the jumper on the main PCB to KB1 position and turn on the scale when there is no load on the platform Display will show n means division 3 settings 2000 2500 3000 to choose from Press Hold to confirm d means division value 3 settings d 1 d 2 amp d 5 to choose from Press Hold to confirm dp means decimal point 4 settings for choose from 0 1 72 amp 3 Press Hold to confirm and enter to weight setting all decimal points are lighted up set the Zero the platform should be empty All decimal points are grey small cursors are on make the maximum capacity setting Put the mass on the platform and then press the Hold key and wait for END to be displayed END Lastly switch the jumper to the original location Adam Equipment Company 2008 9 8 0 ERROR MESSAGES Or 1 A D value Is too low when full range Is calibrated CF Overload remove the excess load to avoid damaging the scale OH The zero point at the zero calibration is out of range check whether there Is something on the platform OL The zero range Is out of range keep the platform empty when power is on P L The battery Is In low voltage change the battery 9 0 WARNING Do not jump while sitting on the chair This may damage the sensor inside Do not move the welghing machine violently and abruptly Move and put down the weighing chair gentl
8. with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device Changes or modifications not expressly approved by Adam Equipment could void the user s authority to operate the equipment WEEE COMPLIANCE Sealed Lead Acid Battery Must be recycled Properly Any Electrical or Electronic Equipment EEE component or assembly of parts intended to be incorporated into EEE devices as defined by European Directive 2002 95 EEC must be recycled or disposed using techniques that do not introduce hazardous substances harmful to our health or the environment as listed in Directive 2002 95 EC or amending legislation Battery disposal in Landfill Sites is more regulated since July 2002 by regulation 9 of the Landfill England and Wales Regulations 2002 and Hazardous Waste Regulations 2005 Battery recycling has become topical and the Waste Electrical and Electronic Equipment WEEE Regulations are set to impose targets for recycling Adam Eguipment Company 2008 ADAM EQUIPMENT is an ISO 9001 2000 certified global company with more than 35 years experience in the production and sale of electronic weighing equi
9. y Wipe the stains with soft cloth soaked with detergent and to dry with soft cloth Do not use organic solutions and hot water to wipe any stains Keep the weighing chair in a dry and clean environment Do not expose it to the outdoors or use it in locations near fire under direct sunshine or with high temperature The On Off key on the screen board only switches off the screen power instead of the entire power to the weighing machine Therefore it Is necessary to switch off the main power supply when the weighing machine is not in use for a long time Otherwise the battery may be damaged as a result of being over discharged O Adam Equipment Company 2008 10 CE Manufacturer s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards following the provisions of the below stated directives Electro Magnetic Compatibility Directive 89 336 EEC Low Voltage Directive 73 23 EEC Adam Equipment Co Ltd Bond Avenue Denbigh East Milton Keynes MK1 1SW United Kingdom FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment The equipment generates uses and can radiate radio frequency energy ana if not installed and used in accordance
Download Pdf Manuals
Related Search