Acer AL2216W User's Manual
Contents
1. Safety Electrical safety Installation safety Cleaning safety Special notes on LCD monitors Package contents Installation instructions Placement Installation External controls Image adjustment Screen adjustment Attachments Plug and play Power Saver Troubleshooting Technical specifications Display modes Table orf Contents 10 Safety Electrical safety Note To ensure your safety and prolong the life of the product read the following safety recommendations carefully before using the product for the first time Installation safety Cleaning safety Do not touch the inside of the monitor Only authorized and qualified technicians should open the LCD monitor case Hold the plug not the power cable when you connect the plug to the socket Make sure your hands are dry This product should only be operatedwith the type of power indicated on the marking label If you are not sure of the type of power available consult your dealer or local power company This product 1s equipped with a 3 prong plug a plug having a third grounding pin This plug will only fit into a grounded power outlet If you are unable to insert the grounded plug into the outlet contact your electrician to replace your obsolete outlet Do not use a two prong adapter instead of the grounded plug Don t expose your LCD monitor to water or any environment with a high temperature or humidity such as kitchens or swimming po2. LED lights will display For more information about the adjustment mode refer to the instructions of your display card HOr Vert Pixel SYNC Polarity Display Mode Frequency Frequency Frequency kHz MHz VGA 640x480 SVGA 800x600 79 976 71394045 L130 lt 000 WXGA 1440x900 Doe Joo Doe LO G5 me amn soss sen G oes o o pomo s f a ase ees eos ea aa 1024x768 60 130 174 120 80 000 10
3. monitor is compatible with EPAENERGY STAR NUTEK when used Wise hh VESA DPMS To save power and extend the life of the product turn off the LCD monitor power supply when it is idle for a long time or not being used Check that the power switch is turned on Make sure the power cable is connected Check that the power switch is turned on Make sure the power cable is connected Ensure that the signal cable is inserted in the receptacle appropriately The Power Saver may turn off the monitor automatically during the operation Make sure the monitor is restored when you press any key from the keyboard Refer to Color Temp Adjustment to adjust RGB color or select color temperatures Remove any electronic equipment in the vicinity that may cause EMI interference Check the signal cable of the monitor to ensure that none of the pins are bent Press the auto adjustment button to automatically optimize the screen Set up the reference position Technical specifications Panel dimension piagona1 559 mm 22 inch LCD monitor Pixel span Horizontal 0 282mm x Vertical 0 282mm LCD panel source Visual angle Borizontal 1707 7 Vertical 160 Effective display Horizontal 473 6 mm x Vertical 296 1 mm signal mode Simulated video frequency 0 7 Vpp 750 separate SYNC and composite SYNC Input signal SYNC frequency Horizontal 30 kHz 62 KHz x Vertical 56 Hz 76 HZ Input terminal Image S 15 PIN VESA DVI D Optional
4. Power transformer ACLOO Z240 Volts S50 s 60 Hz consumption mode Power saving off mode 1W 230VAC 50Hz E E Temperature js 35 operation 20T 55 storage Sonate Humidity 208 80 operation 20 85 storage Actual dimensions W x D x H 513 5 x 1983 2 x 405 2 mm Net weight 4 9 kg TCO03 UL CUL T V GS CE LVD T V ERGO CB CCC FCC B V CCI B Safety standard CE EMC C Tick BSMI ISO 13406 2 EPA PCT NOM WEEE PSB HG Lamp disposal Lamp s inside this product contain mercury and must be recycled or disposed of according to local state or federal laws For more information contact the Electronic Industries Alliance at www eiae org For lamp specific disposal information check www lamprecycle org Fe This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la class B respecte toures les exigencies du R glement sur le materiel brouilieur du Canada Display modes If the signal of your PC system is the same as one of the following reference Signal modes the screen will be adjusted automatically If not the screen will not display or only the
5. e of the monitor should be just a little higher than your line of sight Adjust the front and back dip angles of the monitor so that you can view the display comfortably Connecting the base to the monitor Take the base out of the box and place it ona flat table Position the monitor on top of the base Connect the base into the neck of the monitor along the track You will hear a click sound when the base and the monitor are properly connected Connecting the LCD monitor to a PC E Make sure that the power supply of your PC is turned off and the power plug is removed Connect and fasten both ends of the signal cable to your PC host and LCD monitor respectively j Connect the attached power cable to your LCD monitor Plug the power cable into the receptacle Use the cable tie to bind up the power cord and the D sub signal cable DVI D cable Turn on the power supplies of your PC and LCD monitor Power cable DVI signal cable optional D Sub signal cable External controls Automatic adjustment Power On Off Green indication Power 1S on and normal Orange indication Sleep status in the energy saving mode Colorless indication Power off Press this button to enter OSD Press it again to exi OSD Press this button for selection or adjustment when OSD is started Press this button and click lt and gt to adjust volume when OSD is not started for the m
6. ing figure Click the Menu again to select the function to be adjusted Click Plus or Minus to change current settings EXIT To exit the OSD window select to close and save changes To change other settings repeat steps 2 4 Bright C ontrast Phase Clock Pulse Horizontal Vertical Color Temp Adjustment Language Selection ee 7 EN a Digital OSD Setting Input Selectio Message Restore Exit Screen adjustment Function Definition Description Adjusts the contrast between the foreground Contrast and background of an image on the screen Adjusts the background brightness of the screen Phase Adjusts the focus of the image for analog input adjustment only Adj h j Glock pulse djusts the OLOTE pulse of the image for analog input adjustments only Moves the image left and right on the screen Horizontal for analog input adjustments only Moves the image up and down on the screen for analog input adjustments only W 1 a pe eee ee Sets the color temperature to warm white temperature Cold colo temperature User Definition Red Definition Gree Adjusts red green blue gain B User Definition Blue O Brightness Vertical Used to select the language you want a a sosa je OSD left and right OSD time display Adjusts OSD time display settings Sets up horizontal ve
7. odel with speakers only Press this button to exit the manual when OSD is started Press this button for the display to optimize the position phase and clock pulse automatically when OSD is not started Image The image settings of your LCD monitor were adjusted to their optimal status adjustment for analog TV before shipment See Page 9 If you want to adjust the image for analog settings to suit your personal preference follow the steps below 1 Click Menu to display the OSD window as shown in the following figure 2 Click Plus or Minus to select the function to be adjusted as shown in the following figure 3 Click the Menu again to select the function to be adjusted 4 Click Plus or Minus to change current settings 5 To exit the OSD window select T to close and save changes To change other settings repeat steps 2 4 Bright Contract Phase Clock pulse Horizontal Vertical Color Temp Adjustment Language Selection OSD Setting Auto Message Restore Exi Analog Image adjustment for digital The image settings of your LCD monitor were adjusted to their optimal status for digital TV before shipment See Page 9 If you want to adjust the image settings to suit your personal preference follow the steps below La Ls Click Menu to display the OSD window as shown in the following figure Click Plus or Minus to select the function to be adjusted as shown in the follow
8. ols Flower vases filled with water are also dangerous If your LCD monitor operates abnormally 1 e releases smoke noise orasmell remove the plug immediately and contact your authorized dealer or service center Don t touch your LCD monitor with your fingers or any hard object Avoid scratching or leaving any oil sludge on the surface of the display Protect your LCD monitor by 1nstatling Le im ay place that Ts well ventilated moisture proof and dust free Don t install your LCD monitor near a heat source 1 ovens space heaters fire places furnaces or in the sun To avoid electric shock Or dropping install your BCD ment lor in a place where children will not touch it Secure your LCD monitor firmly and explain the safety rules to children if required When installing your LCD monitor or adjusting its angle attention should be paid to the loading capability and leveling of the structure supporting the LCD monitor Don t spray cleanser or water onto your LCD monitor or its case When cleaning your LCD monitor make sure that no liquid permeates into the inside of the LCD monitor or any accessory Moisten a clean soft lint free cloth with water or glass cleaner without alcohol Squeeze it so it s just a little damp and wipe the surface of your LCD monitor gently It is recommended to use a silk cloth that is exclusively used to clean the display Special notes on LCD monitors The following symptom
9. rtical sequence and focus automatically for analog input only N A Auto adjustment Used to select the input source you want for Analog argital DVI input only Display resolution H V frequency and the Message input port used for current input timing function Restore Restores system to default settings pit o ezoses the OSD window and saves changes 7 Attachments Plug and play Power saver Troubleshooting Power LED does not Arant Icon off Color default Instability or ripple Image offset or wrong size The product provides the latest VESA plug and play feature to prevent complicated and time consuming installation procedures The plug and play feature allows your computer system to identify the LCD monitor easily and set up its functions automatically The LCD monitor transfers the Extended Display Identification Data EDID to your computer system via the Display Data Channel DDC so that your computer can use the self setting function of the LCD Monitor The LCD monitor has a built in Power Control System Power Saver When the LCD monitor is not operated for a period of time the Power Control System automatically sets the system at low voltage status to save power Move the mouse slightly or press any key to return to normal operation The Power Saver function can only be operated by the display card of the computer system You can set upthis function from your computer The LCD
10. s are normal for LCD monitors and do not indicate a problem with the device Due to the nature of the fluorescent light the screen may flicker during initial use Turn off the power switch and then turn it on again to make the flicker disappear You may find slightly uneven brightness on the screen depending onthe desktop pattern you use a The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less caused by a missing pixel or a pixel that is always lit When the same image is displayed for hours on end its afterimage may remain after switching toa new image When this happens the screen will recover slowly by changing the image Turning the LCD monitor off for several hours will also correct this problem Package contents LCD display D Sub signal cable DVI signal cable Quick Start Guide with speakers optional la l ALZ2 16 LED Monitor ac mel Power cable User s Guide CD AL22 16W LOD Monitor Tha gD rere ess am iao te Installation instructions Placement Installati on Note Read the Safety section carefully before starting the installation When installing your LCD monitor consider the placement of the monitor To minimize the reflection of the monitor protect your eyes and ensure premium quality don t install your LCD monitor near windows or where there 1s backlight Keep the monitor at least 30 cm away from your eyes s The upper edg
Download Pdf Manuals
Related Search