ABC Office FD 400P2 User's Manual
Contents
1. Locate the jogger on a solid support The support must not vibrate while the jogger is operating The bin or top cover must not be in contact with any rigid object or adjacent surface it must be free to vibrate OPERATION Place the jogger in its operating location and plug it into a self governing electrical receptacle The power supply voltage and frequency must be as specified on the nameplate Place paper envelopes or checks in the jogger bin s and press the orange power button The vibra tory amplitude of the unit is changed by turning the rheostat dial located on the control panel For best results documents should be jogged for at least 15 to 30 seconds For maximum efficiency Formax recommends a maximum load of 10 pounds for the Models FD 400P1 FD 400P2 FD 400E2 amp a maximum of 50 pounds for the Model FD 400E4 abcoffice 1 800 658 8788 www abcoffice com2. FORMAX 400 Series Joggers FD 400P1 FD 400P2 FD 400E2 FD 400E4 OPERATOR MANUAL 10 04 FIRST EDITION abcoffice 1 800 658 8788 www abcoffice com INTRODUCTION The Formax Electromagnetic Joggers Models FD 400P1 FD 400P2 FD 400E2 amp FD 400E4 are used for jogging and packing of materials A magnet assembly produces a vibrating action which is transmitted to the deck or rack through a system of leaf springs The control assembly consists of an ON OFF switch a rheostat to control the amplitude of vibration and a rectifier to convert AC to DC Refer to the service instructions prior to installing adjusting or performing maintenance on this jogger WARNING Failure to follow these instructions could result in unsatisfactory jogger performance damage or shortened service life or personal injury Inspect the jogger for damage which may have occurred during shipment If any damage is found im mediately notify the shipping carrier and your Formax authorized dealer The FD 400P1 FD 400P2 amp FD 400E2 joggers weigh approximately 25 pounds and the FD 400E4 jogger weighs approximately 90 pounds lift the jogger by the base only The voltage and frequency of the power supply must be as specified on the nameplate The power supply of another rating may cause damage to the unit INSTALLATION CAUTION To prevent possible damage lift the jogger by the base only Lifting by the bin or top cover may cause damage
Download Pdf Manuals
Related Search