Zoom H1
Contents
1. en a Handy Recorder H1 Quick Start Guide Safety and Operation Precautions must be read before using the unit CORPORATI MECE CULCER or reproduction of this part or in whole permission is prohibited H1 5001 2 PoeecccreeccreercccreseceoereceneeeeooneeeoeeS Turning the power on off Turning the unit ON and OFF is easy 1 To turn the unit ON slide the power switch down for about 1 second 2 To turn the unit OFF slide the power switch down for about 1 second again Disabling the buttons The buttons can be disabled to prevent recording from being stopped accidentally for example 1 To disable the buttons slide the power switch upward to HOLD 2 To enable use of the buttons again slide the power switch back to the middle position CoeececreecerevrcccreseceoesreceneeeeeoeeeeeenS Setting the date and time Set the date and time on the unit 1 gt wri yen GOO Np ec eco pes While pressing turn the power on Use lt 44 and gt P to set the value and press 7 11 to move to the next item e Press e to return to the previous item After setting the last item seconds press 71 to finish If the date time setting is initialized this screen opens automatically eoeccecccccccccccesce Reduc eeeecccccecccse2. Unplug the AC adapter when the unit will not be used for a long time This unit cannot recharge batteries Carefully read the precautions of batteries before using them When using a battery insert one commercially available alkaline or NiMH AA battery with the correct orientation e Remove the battery from the unit if it will not be used for a long time Warning e Operation environment Avoid using the unit in the following types of places because doing so A could cause malfunction e Places that become extremely hot or cold Near heating devices or other sources of heat Places that are extremely humid or where the unit could become wet Sandy or dusty places Places with frequent vibrations Caution e Handling Do not disassemble or modify this device Doing so could cause injury or A malfunction ZOOM Corporation will not take responsibility for malfunctions resulting from disassembly or modification Warning Do not apply excessive force to switches and other controls A Use of excessive force dropping bumping and other shocks could break the unit Caution You might need this Quick Start Guide in the future Always keep it in a place where you can access it easily
3. home screen reappears You can also open this screen by pressing while turning the power ON dO sed id U012 P l4 Y2eq eld spes ggo Huiyewoy sysew yor Bulppy Connecting with a computer lt Supplement gt C a In Ver 1 With the power off connect this unit to a Windows PC or a Macintosh us ing a USB cable 2 lt To use as a MicroSD card reader gt USb Press O while CArd is displayed i rA d lt To use as an audio interface gt ER che Press while AUdlo is displayed Displayed alternately at t one second interval 7 USb If no action is performed for 10 seconds it will automatically ie start working as a MicroSD card reader A ud ig lt When CArd is selected gt REETA ini It starts working as a MicroSD card reader aie lt When AUdlo is selected gt SE LE Lt When the screen to select the sampling frequency appears use lt lt 4 PP to select the frequency and press a dae t EENES 497 15 Blink 2A mmn IEF The sampling frequency should be set to the same value as the recording software and playback files It starts working as an audio interface This unit s input signal is sent to the com puter and you can use this unit to moni tor the playback signal on the computer Adjusts the output level Sw
4. purchased the product Windows is a trademark of Microsoft Corporation USA Macintosh and Mac OS are registered trade marks or trademarks of Apple Inc in the USA and other countries The microSD and microSDHC logos are trademarks Other product names registered trademarks and company names in this document are the properties of their respective companies MPEG Layer 3 audio compression technology has been licensed from Fraunhofer IIS and Sisvel S p A Recording concerts lectures and other events without the permission of the rights holders is illegal The contents of this document and the specifications of the product could be changed without warning Coeereecerroecssseeesesessesesesecoeeeeeeeeeses Upgrading the firmware COP oe eee ee esos EEES EEE ESEHSEEEESELESESEEEEEESS Upgrade the firmware version when necessary Check the firmware version when the unit is starting up Version 1 00 is shown as 1 00 for example 1 Copy the firmware upgrade file to the microSD card e The latest version of the firmware can be downloaded from our web site www zoom co jp While pressing 7 Slide the power switch to start the unit in version upgrade mode The version currently used by Ha the unit and the upgrade ver sion are shown on the screen alternately If the version upgrade shown is the one desired press the button to open a confirmation screen Press aga
5. ceccce The lo cut filter can be tur Coecccecccccccccccecoccce ing noise eecocoococoooooocooooooooooo ned ON or OFF When ON the sound of wind and other noise can be reduced Slide the LO CUT switch to ON The LO CUT icon appears on the screen eredald asiou Bulonpey ew pue yep ey Bues suoyng Bulgesiq 48Mod C Prepare O Adjusting the input level Coe eeeeeeeeeseceeeseeeoeeeeeesesereeseneeseoe Adjust the level of the input signal The unit can also be set to automatic adjustment e Use the INPUT LEVEL buttons to adjust the level For automatic adjustment set the AUTO level switch to ON During adjustment the value is shown on the screen When the AUTO level switch is ON the input level adjustment buttons have no effect If the PEAK REC LED blinks rapidly the sound might be distorted In this case lower the input level ececoocooococooooooococoooococoooococooooooooooooo Adjusting the output level Adjust the output level volume from the line headphones output jack and built in speaker e Use the VOLUME buttons to adjust the level e Press and hold the or button to change the value rapidly ie Poceeeccecesreeesesereereseceseeeneeeeoeneseseee Setting the recording format POPC eee ee eee oeeeeeeooeeeeeeeoesELELEOLEDEEEEOE S Set the recordi
6. e to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help For EU Countries Declaration of Conformity This product complies with the requirements of EMC Directive 2004 108 EG and Low Voltage Directive 2006 95 EC Disposal of Old Electrical amp Electronic Equipment Applicable in European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product SS please contact your local city office your household waste disposal service or the shop where you
7. es that are not needed 20 Power button 21 USB jack Turn the power ON OFF Set to HOLD to disable other keys Connect to a computer to power the unit by USB or to trans fer files between the computer and the card in the unit e Screen indications Level meters These show input and output levels File format information This area shows the recording format and the recording date and file number of the playing file Battery level indicator This shows the remaining battery charge It does not appear when power is being supplied by USB Time display This shows the remaining recordable time of the inserted microSD card the playback time or the name of a file that is about to be erased for example Status indicators These show the current operating state FCC regulation warning for the U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interferenc
8. h Use to turn automatic recording level adjustment ON or OFF REC FORMAT switch Use to select the recording format Tripod mount Attach a tripod here to use the unit in a fixed position Battery compartment cover Install one AA battery under here Stereo microphone Record sound in stereo in a 90 field in front of the unit o oj xjo oa s jojn 0 Recording peak indicator This lights during recording and blinks rapidly if the input signal is too loud peak detection 11 Liquid crystal display LCD This shows various information 12 Record button Use to start and stop recording and to confirm file deletion for example 13 Built in speaker mono Use to listen to recordings when not using the line neadphones output jack 14 Mic line input jack Connect and record another device or microphone here Mics that require plug in power can be used with this jack 15 Input level buttons Use to adjust the recording level manually 16 Fast forward button During playback use to select files and to fast forward On the home screen use to set the recording format 17 Play button Use to start and stop file playback On the home screen use to add track marks 18 Fast reverse button During playback use to select files and fast reverse On the home screen use to set the recording format 19 Delete button Use to erase fil
9. in to start the upgrade Poor eecceccsreeesesereeeeeceoeeeeeeeeoeoeeeseee Items included with this product COP eee eeeceoeeceseeeeseeeeeoesesereeoeneeseoe e H1 unit e One AA battery to test the unit a Note Use alkaline or NiMH batteries e Quick Start Guide this manual e microSD card 2 GB 7 Connecting with a computer secocoooocooooococoocooooooococooooooooooooooooooo With this units power off connect it to a computer running Windows or Macintosh OS using a USB cable This allows the unit to be used as a microSD card reader Files recorded to the microSD card are saved in the FOLDERO1 subfolder inside the STEREO folder on the card If a file has been recorded to the unit s built in memory when a microSD card was not in the unit that file will be saved in the BLT IN subfolder inside the STEREO folder sececooooococooooosocoooooooooooooooocooooooooo Safety and Operation Precautions A This indicates that if a user ignores this warning and handles the device incorrectly serious injury or death could result Warning This indicates that if a user ignores this caution and handles the device incorrectly bodily injury or damage to equipment Caution could occur Observe the following precautions to use this unit safely e Power and batteries e Use only the ZOOM AD 17 DC5V 1A USB connection type AC A adapter sold separately
10. itches on off the LO CUT function Switches on off the AUTO level function Adjusts the input level Disables the keys The playback signal of the computer can be monitored when line headphone output jack is not used PoeeceecrnerccereseceoeeeesooeeeeeeeeeeeeeeeeeeoEEeseeeeEeS Part names and functions COPS SHH CE OHO CHS OE ELE EH HEHE EH EERO OE EOE EEO OEOLELEEROEEEE e Parts of the unit 14 z ores e Screen indications e Inserting the battery Ovi 9 Month Day Year EN 500 80 68 QW kHz Bit kbps Open the case while pressing here and then in sert the battery cacy Pime Note Use alkaline or NiMH batteries eoececccccccccescccccce e Parts of the unit Line headphones output jack Coe eeccrecccroerscreeeeceeroeeeeeeoeeeeeneeeeeenEenecenesee S eccocoosooocooooocococooooooooooooo Outputs sound to headphones or external equipment Volume adjustment buttons Use to adjust the output level microSD card slot Insert a microSD or microSDHC card here for use with the unit LO CUT switch Use to turn the low cut filter noise reduction ON or OFF AUTO LEVEL switc
11. layback to select files prj eais Press to pause resume TEET Press to return to the home screen Playback automatically stops after all files have been played H5066 eoeceeccccosceseceesceseeeseseseoeseoeseoeeeoeeeeeS Delete You can delete recorded audio files 1 Press during play back of the file that you want to delete 2 JaLe tE ar nnn t 2 Press to confirm Press pi 44 gt gt or to cancel deletion PoeceoecccerccesrceresesesereeeeereereneeeeeeeeoeeeneS Adding track marks COP ee eee ereseeeseeeeeeoeereseeeeeeeeeeeeeeeeeeeoeoeE You can add track marks to a recording as e During recording press p iito add a mark at that time A e If a file has marks you can press 44 and BP during playback to jump to mark positions y 1O Marks can only be added when the recording format is set to WAV One file can have a maximum of 99 marks SH5OS ecoccoooocoooocooocoooooooocooocoococoooooooooooooooo Formatting microSD cards seoccococoococsocosooooccoocoococcococooooooooooooooooo If a microSD card that is not properly formatted is inserted into this unit the format confirmation screen opens 1 Press e to format the card Press gt 71 44 gt gt or mec PEAK to cancel 2 After formatting completes or is cancelled the
12. ng format and bit rate 1 Select MP3 or WAV format 2 Use 44 and PP to select the bit rate and press e The screen shows the remaining recording time for the current bit rate gt mir ywen wo N 9 a Since the MP3 format uses data compres sion its sound quality is not as good as WAV format but it uses less microSD card capac ity For both formats higher rates provide higher quality ect Front C Operate gt Recording After turning on the unit you can start recording from the home screen with the press of one button 1 Press O to start recording e The recording time appears on the screen RECT Peak 2 Press O again to stop recording and return to the home screen If no microSD card is in the unit you can still record one file of up to 35 seconds using the unit s built in memory Be aware that record ing again without a card will overwrite the recording already in the built in memory sed ld ewo Burp1o991 Hu S S aA9 jNdjno pue yndul Buysnipy ayesadO Bulpioo8y oecerecccerceesrcereseseseseeeeerereneeeeoeeeoeeeeeS Play Play back recorded audio e Press pil to play the last ff ias om recorded file a annc 39 e The remaining playback time UU appears on the screen 2 e Main button functions during playback a HO lt lt gt P Press during p
Download Pdf Manuals
Related Search