Brodit 521632 holder
Contents
1. 4 November 2014 www brodit com 2014 Brodit AB Product 521632 521632 Active holder with cig plug With tilt swivel With USB cable Use an active holder for your Galaxy Tab 4 10 1 while driving and you will always have a freshly charged battery The holder provides a neat and comfortable installation safe and convenient The holder is equipped with a cig plug for connection to the vehicle s 12 Volt socket If you have a vehicle with USB interface you can disconnect the cig plug from the holder s cable in order to get a USB cable which you can connect directly to the USB interface in your vehicle The holder is mounted onto a tilt swivel This mean that you can adjust the angle in order to avoid light reflection on the screen You can easily switch between portrait and landscape mode by turning the holder into desired position It is easy to put the Galaxy Tab 4 10 1 into place in the holder and to take it with you when leaving the Car Tablets Surfpads should not be installed onto a car s dashboard if they block the view or block key controls ProClip Brodit s vehicle mounting bracket is designed for installation of smaller devices like mobile phones and GPS devices ProClip is not designed for large devices like tablets In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet If you want to place a tablet onto the car s dashboard each combination of tablet car must be ex2. amined in detail by you in order to determine if such an installation is possible in the specific case Consideration should be given to the position and how firmly the ProClip is in place as well as the size of the tablet you wish to use Brodit will not give any recommendations for such installations An installation of a tablet onto a vehicle s dashboard is always done on the customer s own responsibility Brodit recommends to use tablets on the car s headrest installed onto a Brodit headrest mount EAN 7320285216327 Item no 521632 fits Samsung Galaxy Tab 4 10 1 SM 1T530 For all countries Samsung Galaxy Tab 4 10 1 SM 1531 For all countries Samsung Galaxy Tab 4 10 1 SM 1535 For all countries 1 2 INSTALLATION INSTRUCTIONS l 2 Please read all of the instructions and look at the pictures before attaching the holder 1 Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back 2 Place the attaching plate onto the desired position Screw the attaching plate into place with the enclosed screws 3 Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel Tighten the screw until the holder is firmly in place but still can be adjusted 4 The holder is in place in upright and horizontal position 2 2
Download Pdf Manuals
Related Search