Brodit ProClip 512290
Contents
1. 512290 Active holder with cig plug With tilt swivel Fits device with standard or extended battery The active holder charges your Motorola when it is in the holder The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection Connects to the vehicle s cigarette lighter socket 12 24 Volt Attach onto a ProClip Mounting Platform EAN 7320285122901 Item no 512290 fits Motorola Droid Bionic For USA 1 2 INSTALLATION INSTRUCTIONS l Please read all of the instructions and look at the pictures before attaching the holder 1 Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back 2 Place the attaching plate onto the desired position Screw the attaching plate into place with the enclosed screws Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel Screw a few turns on the screw just so the thread starts to pull Pull the holder toward you and hold it slightly tensed in the same time tighten the screw so the holder is pulled toward the tilt swivel Tighten the screw firm at first then loosen it a bit so the holder is firmly in place but still can be adjusted 3 Slide the device sideways into the holder until you hear feel it snaps into place 4 The holder is in place 2 2
Download Pdf Manuals
Related Search