Lancom Systems L-151gn
Contents
1. Via e mail SYSLOG or SNMP trap Dynamic bandwidth management with IP traffic shaping Bandwidth reservation Dynamic reservation of minimum and maximum bandwidths totally or connection based separate settings for send and receive directions Setting relative bandwidth limits for QoS in percent DiffServ TOS Packet size control Priority queuing of packets based on DiffServ TOS fields Automatic packet size control by fragmentation or Path Maximum Transmission Unit PMTU adjustment Layer 2 Layer 3 tagging Automatic or fixed translation of layer 2 priority information IEEE 802 11p marked Ethernet frames to layer 3 DiffServ attributes in routing mode Translation from layer 3 to layer 2 with automatic recognition of IEEE 802 11p support in the destination device LAN COM L 1 51 gn Wireless Features as of LCOS 9 00 Security Intrusion Prevention Monitoring and blocking of login attempts and port scans IP spoofing Source IP address check on all interfaces only IP addresses belonging to the defined IP networks are allowed Access control lists Filtering of IP or MAC addresses and preset protocols for configuration access Denial of Service protection Protection from fragmentation errors and SYN flooding General Detailed settings for handling reassembly PING stealth mode and AUTH port URL blocker _ Filtering of unwanted URLs based on DNS hitlists and wildcard filters Password prote2. LANCOM Systems LANCOM L 151gn Wireless Single radio entry access point for reliable WLAN applications Radio operation in the 2 4 GHz frequency band with up to 150 Mbps based on IEEE 802 11n Fast Ethernet connector with Power over Ethernet based on IEEE 802 3af Support of Multi SSID for up to 8 simultaneous WLAN applications Two external RSMA antenna connectors ideal for installations in suspended ceilings Flexibly scalable WLAN scenarios due to stand alone operation or managed via a WLAN controller LANCOM Systems The entry device for professional WLAN infrastructures The LANCOM L 151gn Wireless is ideal for the installation of professional WLAN infrastructures where bandwidth is not as important as signal coverage and reliability With up to 150 Mbps corporate meeting rooms or caf s and restaurants for instance can be provided with simple WLAN guest accesses Apart from that the LANCOM L 151gn Wireless is equipped with many customary LANCOM access point features e g the redundant power supply either via the supplied 12 V power adapter or via PoE based on IEEE 802 3af or the support of Multi SSID for setting up multiple parallel independent WLAN networks Further the device is equipped with two antenna ports which enable the user to either connect the supplied rod antennas or special sector antennas for installing the access point in suspended ceilings More focus on the essentials Most WLAN end devices use the 2
3. Firewalling QoS VLAN Routing etc Automatic learning of routing tags for ARF contexts from the routing table HTTP HTTP and HTTPS server for configuration by web interface DNS DNS client DNS server DNS relay DNS proxy and dynamic DNS client DHCP DHCP client DHCP relay and DHCP server with autodetection Cluster of several LANCOM DHCP servers per context ARF network enables caching of all DNS assignments at each router DHCP forwarding to multiple redundant DHCP servers NetBIOS NetBIOS IP proxy NTP NTP client and SNTP server automatic adjustment for daylight saving time Policy based routing Policy based routing based on routing tags Based on firewall rules certain data types are marked for specific routing e g to particular remote sites or lines Dynamic routing Dynamic routing with RIPv2 Learning and propagating routes separate settings for LAN and WAN Extended RIPv2 including HopCount Output Delay Poisoned Reverse Triggered Update for LAN acc to RFC 2453 and WAN acc to RFC 2091 as well as filter options for propagation of routes Definition of RIP sources with wildcards DHCPv6 DHCPv6 client DHCPv6 server DHCPv6 relay stateless and stateful mode IPv6 address IA_NA prefix delegation IA_PD DHCPv6 reconfigure server and client DHCPv6 guard Lightweight DHCPv6 relay agent Layer 2 functions ARP lookup Packets sent in response to LCOS service requests e g for Telnet SSH
4. Each access and all changes of configuration are logged Access verification and logging of SNMP Get and Set requests WEBconfig supports the access rights of TACACS and choice of TACACS server at login LANconfig provides a device login with the TACACS request conveyed by the addressed device Authorization to execute scripts and each command within them by checking the TACACS server s database CRON action table and script processing can be diverted to avoid TACACS to relieve TACACS servers Redundancy by setting several alternative TACACS servers Configurable option to fall back to local user accounts in case of connection drops to the TACACS servers Compatibility mode to support several free TACACS implementations RADIUS Support of RADIUS protocol for authentication of configuration access Administrative privileges can be assigned for each administrator Remote maintenance of 3rd party devices A remote configuration for devices behind der LANCOM can be accomplished after authentication via tunneling of arbitrary TCP based protocols e g for HTTP S remote maintenance of VoIP phones or printers of the LAN Additionally SSH and Telnet client allow to access other devices from a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface TFTP amp HTTP S client For downloading firmware and configuration files from a TFTP HTTP or HTTPS server with variable file names wildcar
5. Layer 3 tunnels and transported to a LANCOM WLAN controller By doing this the access point is independent of the present infrastructure of the network Possible applications are roaming without changing the IP address and compounding SSIDs without using VLANs The WLAN standard IEEE 802 11u Hotspot 2 0 allows for a seamless transition from the cellular network into WLAN hotspots Authentication methods using SIM card information certificates or username and password enable an automatic encrypted login to WLAN hotspots without the need to manually enter login credentials Client Steering The effective distances and transmission rates that can be achieved are depending of the site RF conditions WLAN clients are directed actively to the best available access point to provide the best overall load balancing and the highest possible bandwidth for each client Client Steering can be based on client number frequency band and signal strength Note IEEE 802 11n Features MIMO Only in installations with WLAN controller MIMO technology is a technique which uses multiple transmitters to deliver multiple data streams via different spatial channels Depending on the existing RF conditions the throughput is multiplied with MIMO technology MAC Aggregation and Block Acknowledgement Space Time Block Coding STBC MAC Aggregation increase the IEEE 802 11 MAC efficiency by combining MAC data frames and sending it out with a singl
6. 3af Environment Temperature range 0 50 C humidity 0 95 non condensing Housing Robust synthetic housing rear connectors ready for wall mounting Kensington lock 210 x 45 x 140 mm W x H x D Power consumption max approx 5 Watts with 12 V 1 5 A power supply adapter total power consumption of access point and power supply adapter approx 4 3 Watts via PoE LAN COM L 1 51 gn Wireless Features as of LCOS 9 00 Declarations of conformity EN 60950 1 EN 301 489 1 EN 301 489 17 2 4 GHz WLAN EN 300 328 Notifications Certifications notified in Germany Belgium Netherlands Luxembourg Austria Switzerland UK Italy Spain France Portugal Czech Republic Denmark IPv6 IPv6 Ready Gold Note You will find all declarations of conformity in the products section of our website at www lancom systems eu Scope of delivery CD DVD Data medium with management software LANconfig LANmonitor WLANmonitor LANCAPI and documentation Cable 1 Ethernet cable 3 m Antennas Two 3 dBi dipole antennas Power supply unit External power adapter 230 V NEST 12 V 1 5 A DC S coaxial power connector 2 1 5 5 mm bayonet temperature range from 5 to 45 C LANCOM item no 110723 EU LANCOM item no 110829 UK not included in bulk delivery Support 3 years support via hotline and Internet KnowledgeBase Software updates Regular free updates LCOS operating system and LANCOM Management System via In
7. 4 GHz band which is why the LANCOM L 151gn Wireless has been designed for this frequency band in particular By using the 2x2 MIMO technology the access point provides a better signal coverage and often enables the use of WLAN in environments where older 54 Mbps devices were not able to deploy enough signal strength Therefore the LANCOM L 151gn Wireless is the foundation for a stable reliable wireless network and is hence perfectly fit for business critical applications such as the connection of cash systems Professional management The LANCOM L 151gn Wireless is a stand alone access point It can hence be operated without a WLAN controller and be configured via free of charge management software Practical configuration wizards facilitate the administrator s daily business If a central management is desired the access point can be managed by a controller without software update In this case of course the proven LANCOM Smart Controller concept applies as well If the controller fails the access point can keep operating autonomously and the WLAN coverage is maintained And there is more Just like all LANCOM devices the access point can be integrated into the comprehensive monitoring solution LANCOM LSM This enables the display of active status information on floor plans or an automatic data logging and alert messages in case of problems More reliability for the future LANCOM products are fundamentally designed for a product life
8. 5 dBm Receiver sensitivity 2 4 GHz IEEE 802 11b 98 dBm 1 Mbps 94 dBm 11 Mbps IEEE 802 11g 96 dBm 6 Mbps 82 dBm 54 Mbps IEEE 802 11n 95 dBm 6 5 Mbps MCSO 20 MHz 78 dBm 65 Mbps MCS 7 20 MHz Radio channels 2 4 GHz Up to 13 channels max 3 non overlapping depending on country specific restrictions Roaming Seamless handover between radio cells IAPP support with optional restriction to an ARF context IEEE 802 11d support Fast roaming Based on IEEE 802 11r allows fast roaming procedures between access points This is possible by using IEEE 802 1X authentication or pre shared keys in controller based WLAN installations which save the access keys temporarily and distribute them to the managed access points Concurrent WLAN clients Fast client roaming VLAN Up to 30 clients recommended 512 clients max With background scanning moving LANCOM client mode access points pre authenticate to alternative access points which offer a better signal before Roaming fails VLAN ID definable per interface WLAN SSID point to point connection and routing context 4094 IDs IEEE 802 1q Dynamic VLAN assignment Dynamic VLAN assignment for target user groups based on MAC addresses BSSID or SSID by means of external RADIUS server Q in Q tagging Support of layered IEEE 802 1q VLANs double tagging Multi SSID Simultaneous use of up to 8 independent WLAN networks per WL
9. AN interface IGMP snooping Support for Internet Group Management Protocol IGMP in the WLAN bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast packets devices with integrated WLAN only Automated detection of multicast groups Configurable action for multicast packets without registration Configuration of static multicast group members per VLAN ID Configuration of query simulation for multicast membership per VLAN ID Protected Management Frames Protection of WLAN Management Frames based on the standard IEEE 802 11w against man in the middle attacks by using Message Ingegrity Codes MIC Security IEEE 802 11i WPA2 with passphrase WPA2 Personal or IEEE 802 1X WPA2 Enterprise and hardware accelerated AES closed network WEP64 WEP128 WEP152 user authentication IEEE 802 1x EAP LEPS WPA1 TKIP EAP Types EAP TLS EAP TTLS MSCHAPv2 PEAPvO EAP MSCHAPv2 PEAPv1 EAP GTC EAP SIM EAP AKA EAP AKA Prime EAP FAST RADIUS server Integrated RADIUS server for MAC address list management EAP server Integrated EAP server for authentication of IEEE 802 1X clients via EAP TLS EAP TTLS PEAP MSCHAP or MSCHAPv2 RADIUS Accounting per SSID A RADIUS server can be set for each individual SSID Quality of Service U APSD WMM Power Save Prioritization according to Wireless Multimedia Extensions WME subset of IEEE 802 11e Extension of power saving according to IEEE 802 11e by Unscheduled Auto
10. S proxy DynDNS client NTP port mapping policy based routing based on routing tags tagging based on firewall rules dynamic routing with RIPv2 VRRP Transparent WLAN client mode for wireless Ethernet extensions e g connecting PCs or printers by Ethernet up to 64 MAC addresses Automatic selection of a WLAN profile max 8 with individual access parameters depending on signal strength or priority Incoming Outgoing Traffic inspection based on connection information Trigger for firewall rules depending on backup status e g simplified rule sets for low bandwidth backup lines Limitation of the number of sessions per remote site ID Packet filter Check based on the header information of an IP packet IP or MAC source destination addresses source destination ports DiffServ attribute remote site dependant direction dependant bandwidth dependant Extended port forwarding N N IP address mapping Network Address Translation NAT based on protocol and WAN address i e to make internal webservers accessible from WAN N N IP address mapping for translation of IP addresses or entire networks Tagging Actions The firewall marks packets with routing tags e g for policy based routing Source routing tags for the creation of independent firewall rules for different ARF contexts Forward drop reject block sender address close destination port disconnect Notification Quality of Service Traffic shaping
11. SNTP SMTP HTTP S SNMP etc via Ethernet can be routed directly to the requesting station default or to a target determined by ARP lookup LLDP Automatic discovery of network topology in layer 2 networks Link Layer Discover Protocol DHCP option 82 DHCP relay agent information option 82 can be insterted on devices with WLAN bridge RFC 3046 LAN protocols IP ARP proxy ARP BOOTP DHCP DNS HTTP HTTPS IP ICMP NTP SNTP NetBIOS PPPoE server RADIUS RIP 1 RIP 2 RTP SIP SNMP TCP TFTP UDP VRRP VLAN Rapid Spanning Tree IEEE 802 1d Spanning Tree and IEEE 802 1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections LAN COM L 1 51 gn Wireless Features as of LCOS 9 00 LAN protocols IPv6 NDP stateless address autoconfiguration SLAAC stateful address autoconfiguration with DHCPv6 router advertisements RA guard ICMPv6 DHCPv6 DNS HTTP HTTPS PPPoE RADIUS TCP UDP SMTP IPv6 Dual Stack IPv4 IPv6 dual stack IPv6 compatible LCOS applications WEBconfig HTTP HTTPS SSH Telnet DNS TFTP Firewall RAS dial in IPv6 layer 2 protocol filter Router advertisement snopping blocks illegal IPv6 router advertisements in the WLAN bridge DHCPv6 snopping blocks all illegal DHCPv6 servers on layer 2 The lightweight DHCPv6 relay agent LDRA can insert relay agent information on layer 2 WAN protocols Ethernet PPPoE Multi PPPoE ML PPP PPTP PAC or PNS L2TP
12. ction Password protected configuration access can be set for each interface Alerts Alerts via e mail SNMP Traps and SYSLOG Authentication mechanisms EAP TLS EAP TTLS PEAP MS CHAP MS CHAPv2 as EAP authentication mechanisms PAP CHAP MS CHAP and MS CHAPv2 as PPP authentication mechanisms WLAN protocol filters Limitation of the allowed transfer protocols source and target addresses on the WLAN interface Adjustable reset button Adjustable reset button for ignore boot only and reset or boot IP redirect Fixed redirection of any packet received over the WLAN interface to a dedicated target address High availability redundancy VRRP VRRP Virtual Router Redundancy Protocol for backup in case of failure of a device or remote station Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions incl test mode for firmware updates Line monitoring Line monitoring with LCP echo monitoring up to 4 addresses for end to end monitoring with ICMP polling Routing functions Router IP and NetBIOS IP multi protocol router Advanced Routing and Forwarding Separate processing of 16 contexts due to virtualization of the routers Mapping to VLANs and complete independent management and configuration of IP networks in the device i e individual settings for DHCP DNS
13. ds for name MAC IP address serial number e g for roll out management Commands for live Telnet session scripts or CRON jobs HTTPS Client authentication possible by username and password or by certificate SSH amp Telnet client SSH client function compatible to Open SSH under Linux and Unix operating systems for accessing third party components from a LANCOM router Also usable when working with SSH to login to the LANCOM device Support for certificate and password based authentication Generates its own key with sshkeygen SSH client functions are restricted to administrators with appropriate rights Telnet client function to login administer third party devices or other LANCOM devices from command line interface HTTPS Server Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server Security Access rights read write over WAN or W LAN can be set up separately Telnet SSL SSH SNMP HTTPS HTTP access control list Scripting Scripting function for batch programming of all command line parameters and for transferring partial configurations irrespective of software versions and device types incl test mode for parameter changes Utilization of timed control CRON or connection establishment and termination to run scripts for automation Scripts can send e mails with various command line outputs as attachments Load commands LoadFirmware LoadConfig and LoadScript can be executed conditional
14. e header The receiver acknowledges the combined MAC frame with a Block Acknowledgement Depending on existing RF conditions this technique improves throughput by up to 20 Coding method according to IEEE 802 11n The Space Time Block Coding improves reception by coding the data stream in blocks Low Density Parity Check LDPC Maximal Ratio Combining MRC Short Guard Interval WLAN operating modes WLAN access point WLAN router WLAN client Firewall Stateful inspection firewall Low Density Parity Check LDPC is an error correcting method IEEE 802 11n uses convolution coding CC as standard error correcting method the usage of the more effective Low Density Parity Check LDPC is optional Maximal Ratio Combining MRC enables the receiver access point in combination with multiple antennas to optimally combine MIMO signals to improve the client reception at long range The guard interval is the time between OFDM symbols in the air IEEE 802 11n gives the option for a shorter 400 nsec guard interval compared to the legacy 800 nsec guard interval Under ideal RF conditions this increases the throughput by upto 10 Infrastructure mode autonomous operation or managed by LANCOM WLAN controller Use of the LAN connector for simultaneous DSL over LAN IP router NAT Reverse NAT IP masquerading DHCP server DHCP client DHCP relay server DNS server PPPoE client incl Multi PPPoE PPTP client and server NetBIO
15. er specific standard settings memory space 1 or as a rollout configuration memory space 2 A further option is the storage of a persistent standard certificate for the authentication of connections during rollouts Device SYSLOG SYSLOG buffer in the RAM size depending on device memory to store events for diagnosis Default set of rules for the event protocol in SYSLOG The rules can be modified by the administrator Display and saving of internal SYSLOG buffer events from LANCOM devices with LANmonitor display only with WEBconfig LAN COM L 1 51 gn Wireless Features as of LCOS 9 00 Management Access rights Individual access and function rights for up to 16 administrators Alternative access control on a per parameter basis with TACACS User administration RADIUS user administration for dial in access PPP PPTP Support for RADSEC Secure RADIUS providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet SSL SSH with password or public key browser HTTP HTTPS TFTP or SNMP firmware upload via HTTP HTTPS or TFTP TACACS Support of TACACS protocol for authentication authorization and accounting AAA with reliable connections and encrypted payload Authentication and authorization are separated completely LANCOM access rights are converted to TACACS levels With TACACS access can be granted per parameter path command or functionality for LANconfig WEBconfig or Telnet SSH
16. ly in case certain requirements are met For example the command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available In addition LoadFile allows the upload of files including certificates and secured PKCS 12 containers SNMP SNMP management via SNMPv2 new unified private MIB for all most current and future LANCOM devices with LCOS Download link in WEBconfig Timed control Scheduled control of parameters and actions with CRON service Diagnosis Extensive LOG and TRACE options PING and TRACEROUTE for checking connections LANmonitor status display internal logging buffer for SYSLOG and firewall events LANCOM WLAN controller Supported by all LANCOM WLAN controller separate optional hardware equipment for installation optimization operating and monitoring of WLAN networks except for P2P connections Statistics Extensive Ethernet IP and DNS statistics SYSLOG error counter a AAE A Accounting Connection time online time transfer volumes per station Snapshot function for regular read out of values at the end of a billing period Timed CRON command to reset all counters at once Export Accounting information exportable via LANmonitor and SYSLOG Hardware Power supply 12 V DC external power adapter 230 V with bayonet cap to protect against accidentally unplugging Power supply Via Power over Ethernet compliant with IEEE 802
17. matic Power Save Delivery equivalent to WMM Power Save U APSD supports the automatic switch of clients to a doze mode Increasmed battery lifetime for telephone calls over VOWLAN Voice over WLAN bandwidth limitation per WLAN client Maximum transmit and receive rates and an individual VLAN ID can be assigned to each WLAN client MAC address bandwidth limitation per SSID Maximum transmit and receive rates can be assigned to each SSID Broken link detection If the link of a chosen LAN interface breaks down a WLAN module can be deactivated to let the associated clients search for a new base station Background scanning Detection of rogue AP s and the channel information for all WLAN channels during normal AP operation The Background Scan Time Interval defines the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity The time interval can be specified in either milliseconds seconds minutes hours or days Client detection Rogue WLAN client detection based on probe requests IEEE 802 1X supplicant Authentication of an access point in WLAN client mode at another access point via IEEE 802 1X EAP TLS EAP TTLS and PEAP LAN COM L 1 51 gn Wireless Features as of LCOS 9 00 WLAN Layer 3 Tunneling IEEE 802 11u Layer 3 Tunneling in conformity with the CAPWAP standard allows the bridging of WLANs per SSID to a separate IP subnet Layer 2 packets are encapsulated in
18. nna AirLancer Extender O D80g 2 4 GHz dual linear polarisation diversity outdoor sector antenna item no 61221 External antenna AirLancer Extender I D180agn dual band indoor antenna item no 60917 Power over Ethernet Injector LANCOM GE PoE Power Injector item no 61554 EU and 61555 UK Note The Polarization Diversity antennas require 2 cables and surge arrestors Item number s LANCOM L 151gn Wireless EU UK 61573 EU 61574 UK LANCOM L 151gn Wireless 10er Bulk 61575 www lancom eu LANCOM Systems LANCOM Systems GmbH Adenauerstr 20 B2 52146 Wuerselen Germany E Mail info lancom eu Internet www lancom eu LANCOM LANCOM Systems and LCOS are registered trademarks All other names or descriptions used may be trademarks or registered trademarks of their owners Subject to change without notice No liability for technical errors and or omissions 7 2014
19. spanning several years They are equipped with hardware dimensioned for the future Even reaching back to older product generations updates to the LANCOM Operating System LCOS are available several times a year free of charge and offering major features LANCOM offers unbeatable protection of your investment LANCOM L 151gn Wireless Frequency band 2 4 GHz Data rates IEEE 802 11n Features as of LCOS 9 00 2400 2483 5 MHz ISM 144 4 Mbps according to IEEE 802 11n with MCS15 Fallback to 6 5 Mbps with MCSO Data rates IEEE 802 1 1b g 54 Mbps to IEEE 802 11g fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection compatible to IEEE 802 11b 11 5 5 2 1 Mbps Automatic Rate Selection IEEE 802 11 b g compatibility mode or pure g or pure b Range IEEE 802 11b g Up to 150 m up to 30 m in buildings Range IEEE 802 11n Up to 250 m 6 5 Mbps up to 20 m 144 4 Mbps indoor Output power at radio module 2 4 GHz IEEE 802 11b 18 dBm 1 and 2 Mbps 18 dBm 5 5 and 11 Mbps IEEE 802 11g 18 19 dBm 6 up to 36 Mbps 18 dBm 48 Mbps 17 dBm 54 Mbps IEEE 802 11n 19 dBm 6 5 and 13 Mbps MCS0 8 20 MHz 13 dBm 65 and 130 Mbps MCS7 15 20 MHz Max radiated power EIRP 2 4 GHz band IEEE 802 11b g Up to 20 dBm 100 mW EIRP transmission power control according to TPC Minimum transmission power Transmission power reduction in software in 1 dB steps to min 0
20. ternet Options Advance Replacement LANCOM Next Business Day Service Extension CPE item no 61411 Warranty Extension LANCOM 2 Year Warranty Extension CPE item no 61414 Accessories LANCOM WLC 4006 EU UK US LANCOM WLAN controller for central management of 6 opt up to 30 LANCOM access points and WLAN routers item no 62035 EU item no 62036 UK and item no 62037 US LANCOM WLC 4006 EU UK LANCOM WLAN controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61367 EU and item no 61368 UK only stock devices article is no longer available LANCOM WLC 4025 EU UK US LANCOM WLAN controller for central management of 25 opt up to 100 LANCOM access points and WLAN routers item no 61378 item no Art Nr 61379 and item no 61384 US LANCOM WLC 4025 EU UK LANCOM WLAN controller for central management of 25 opt up to 100 LANCOM access points and WLAN routers item no 61550 EU and item no 61551 UK only stock devices article is no longer available LANCOM WLC 4100 EU UK LANCOM WLAN controller for central management of 100 opt up to 1000 LANCOM access points and WLAN routers item no 61369 EU and item no 61377 UK External antenna AirLancer Extender 0 30 2 4 GHz outdoor antenna item no 60478 External antenna AirLancer Extender 0 70 2 4 GHz outdoor antenna item no 60469 External ante
21. ties per project or user Automatic storage of the current configuration before firmware updates Exchange of configuration files between similar devices e g for migrating existing configurations to new LANCOM products Detection and display of the LANCOM managed switches Extensive application help for LANconfig and parameter help for device configuration LANCOM QuickFinder as search filter within LANconfig and device configurations that reduces the view to devices with matching properties Central configuration of each management port LANmonitor Monitoring application for Microsoft Windows for remote surveillance and logging of the status of LANCOM devices and connections incl PING diagnosis and TRACE with filters and save to file Search function within TRACE tasks Wizards for standard diagnostics Export of diagnostic files for support purposes including bootlog sysinfo and device configuration without passwords Graphic display of key values marked with an icon in LANmonitor view over time as well as table for minimum maximum and average in a separate window e g for Rx Tx CPU load free memory Monitoring of the LANCOM managed switches Flick easily through different search results by LANCOM QuickFinder WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations incl Rogue AP and Rogue Client visualization LANCOM QuickFinder as search filter that reduces the view to de
22. v2 LAC or LNS and IPoE with or without DHCP RIP 1 RIP 2 VLAN IP IPv6 IPv6 over PPP IPv6 and IPv4 IPv6 dual stack session IPoE autoconfiguration DHCPv6 or static Tunneling protocols IPv4 IPv6 6to4 6in4 6rd static and via DHCP dual stack lite IPv4 in IPv6 tunnel WAN operating mode XDSL ext modem ADSL1 ADSL2 or ADSL2 with external ADSL2 modem Interfaces ETH 10 100Base TX autosensing auto node hub PoE compliant with IEEE 802 3af DSL over LAN DSLoL The LAN port can even parallel to LAN mode be used as a WAN port for connecting external DSL modems PPPoE or external routers External antenna connectors Two reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors Please respect the restrictions which apply in your country when setting up an antenna system For information about calculating the correct antenna setup please refer to www lancom systems eu LCMS LANCOM Management System LANCconfig Configuration program for Microsoft Windows incl convenient Setup Wizards Optional group configuration simultaneous remote configuration and management of multiple devices over IP connection HTTPS HTTP SSH TFTP A tree view of the setting pages like in WEBconfig provides quick access to all settings in the configuration window Password fields which optionally display the password in plain text and can generate complex passwords Configuration program proper
23. vices with matching properties Firewall GUI Graphical user interface for configuring the object oriented firewall in LANconfig Tabular presentation with symbols for rapid understanding of objects choice of symbols for objects objects for actions Quality of Service remote sites services default objects for common scenarios individual object definition e g for user groups Automatic software update Voluntary automatic updates for LCMS Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server myLANCOM account mandatory Updates can be applied directly after the download or at a later time Management WEBconfig Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Similar to LANconfig with a system overview SYSLOG and events display symbols in the menu tree quick access with side tabs WEBconfig also features Wizards for basic configuration security Internet access LAN LAN coupling Online help for parameters in LCOS menu tree LANCOM Layer 2 Management emergency The LANCOM Layer 2 Management protocol LL2M enables an encrypted access between the command line interfaces of two LANCOM device management directly via a Layer 2 connection Alternative boot configuration During rollout devices can be preset with project or customer specific settings Up to two boot and reset persistent memory spaces can store customized configurations for custom
Download Pdf Manuals
Related Search