Dell Wyse 920359-02L mounting kit
Contents
1. Wyse P25 and Wyse Model Tx0 Dual VESA Mount Installation Instructions The bracket enables a Wyse P25 or Model Tx0 cloud client to be mounted to a wall or on most VESA compliant mounting surfaces and monitors Both VESA 75 mm and 100 mm mounting pattems are supported The mounting bracket consists of two 2 pieces The largest bracket piece attaches to the mounting surface using the VESA mounting pattems User provided hardware must be used that can withstand a force of 25 pounds 11 35 kilograms The cloud client is inserted in a vertical postion and cables are attached The smaller bracket piece attaches to the VESA compliant mounting monitor The monitor bracket and mounted wall bracket pieces are then joined with the provided four 4 thumb screws Wyse cloud clients that use the Dual VESA Mount bracket Wyse P25 Wyse Model Tx0 Notes When determining location take into account the cable lengths of the monitor keyboard mouse power supply and peripherals Mount the cloud client only as shown improper orientation where the back panel or front panel is facing down could restrict the airflow of heat from the device and damage it Do not enclose the cloud client in a confined environment without proper ventilation If you have questions contact the Wyse Sustaining Engineering Group Use the following instructions to mount the cloud client 1 Attach the largest bracket to the mounting surface a swing arm mount i2. o brackets pieces together 5 To assemble the two brackets together face the mounted monitor bracket towards the mounted wall bracket Lit the monitor bracket a litle higher than the wail bracket and tipping it forward at the top guide it downward so that the monitor bracket s turned ledge hooks over the wall bracke s raised edge Hg 6 Line up the screws holes of the bracket pieces two on top and two on bottom and secured with four 4 four thumb screws provided top thumb screws are shown Do not overtighten 7 Make all desired connections and then connect the power adapter s AC power cable to an electrical outlet SER ate A ha md WYSE
3. s shown The mounting surface can have either the VESA 75 mm or 100 mm mounting pattern The bracket should be placed upright as shown Secure the bracket with proper user provided hardware that can withstand a force of 25 pounds 11 35 kilograms T Note If installing on a hollow wall any standard anchoring method may be used such as screws buttery anchors or expansion bolts 2 Remove the cloud client from its horizontal stand Holding the cloud client with the Kensington lock slot positioned near the bottom slide it into the mounted bracket as shown using the pre assembled guide rails until it clicks into place The cloud client s Power button will be at the top on the opposite side Kensington Tock slot 3 Ifyou have mounted the cloud client bracket to a wall now is the most convenient time to attach al desired connections to the cloud alent Do not plug the power adapter s AC power cable to an electrical outlet until the bracket is fully assembled 4 Position the remaining bracket on the monitor as shown to match a set of mounting holes Both VESA 75 mm and 100 mm mounting pattems are supported The bracket should be placed with the tured edge on top painting downward Secure with four 4 user provided screws do not overtighten T Note It you have mounted the cloud client bracket to a wall now is the most convenient time to attach all desired connections to the monitor betore assembling the tw
Download Pdf Manuals
Related Search