LG E2422PY-BN
Contents
1. To adjust the contrast of the screen You can set the offset level If you select HIGH the screen will be bright and if you select LOW the screen will be dark Offset As the criteria for video signal it is the darkest screen the monitor can show To choose the language in which the control names are displayed Restore all factory default settings except LANGUAGE Press the 4 gt buttons to reset immediately On Screen Display OSD Selection and Adjustment mm You were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu MONITOR SETUP Press the SUPER ENERGY SAVING Button then the main menu of the OSD appears Menu Name SUPER ENERGY SAVING ON OFF TOTAL POWER REDUCTION Sub menus RESET TOTAL CO2 REDUCTION Icons Button EXIT Exit Tip lt gt Move amp amp Restart to select sub menu NOTE OSD On Screen Display menu languages on the monitor may differ from the manual SUPER ENERGY SAVING Main menu SUPER ENERGY SAVING ON s Exit Exit lt P Move Select another sub menu OK Select TOTAL POWER REDUCTION How much power is saved during using the monitor TOTAL CO2 REDUCTION Change the TOTAL POWER REDUCTION to CO2 TOT2. LG Life s Good OWNER S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference LCD MONITOR MODEL E2422PY www lg com Accessories Thank for selecting LGE products Please make sure the following items are included with your monitor If any items are missing contact your dealer User s Guide Cards 15 pin D Sub Signal Cable To set it up this signal cable may be attached to this product before shipping out DVI D Signal Cable This feature is not available in all countries Audio Cable USB Cable NOTE a This accessories may look different from those shown here a User must use shielded signal interface cables D sub 15 pin cable DVI D cable with ferrite cores to maintain standard compliance for the product Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices are turned off Connecting the stand base 1 Place the monitor with its front facing downward on a cushion or soft cloth 2 Assemble the Stand Base into the Stand Body Be sure don t pull out the Stop Pin and make the Stand Base direction as shown Stand Body Stand Base Stop Pin 3 Once assembled take the monitor up carefully and face the front side WARNING a The tape and locking pin may only be removed from those monitors equipped with a standing
3. TEMP 4 PRESET 2 2 gt PRESET 4 WARM gt Exit Exit 4 gt V Move Description To adjust the volume of headphone Speaker To adjust the brightness of the screen WIDE ORIGINAL PRESET USER Select another sub menu Switch to full screen mode according to input image signal Change the input image signal ratio to original This function works only if input resolution is lower than monitor ratio 16 9 Select the screen color e WARM Set the screen to warm color temperature e MEDIUM Set the screen to medium color temperature e COOL Set the screen to cool color temperature le RED Set your own red color levels GREEN Set your own green color levels le BLUE Set your own blue color levels On Screen Display OSD Selection and Adjustment CONTRAST D SUB 1024 X 768 60Hz 9 CONTRAST M F LANGUAGE 4 ENGLISH d FACTORY RESET BLACK LEVEL only for DP input DP 1080P 1920x1080 60Hz CONTRAST 70 m z BLACK LEVEL 4 HIGH gt LANGUAGE 4 ENGLISH gt FACTORY RESET 4 NO LANGUAGE D SUB 1024 X 768 60Hz CONTRAST 70 LANGUAGE 4 ENGLISH 1 17 gt FACTORY RESET 4 NO FACTORY RESET D SUB 1024 X 768 60Hz CONTRAST UO 70 LANGUAGE 4 ENGLISH gt FACTORY RESET 4 NO 1 2 gt Exit Exit 4 gt V Move Select another sub menu Main menu Description
4. YOu were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu MONITOR SETUP gO 00 U E Press the MENU Button then the main menu of the OSD appears D SUB 1024 X 768 60Hz se BRIGHTNESS gt 100 ORIGINAL RATIO 4 WIDE gt 4 PRESET 4 WARM gt Menu Name Icons Sub menus e COLOR TEMP PRESET EXIT Exit lt gt Adjust Decrease Increase SET WV Select another sub menu T Restart to select sub menu NOTE s OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment Main menu VOLUME D SUB 1024 X 768 60Hz Sub menu BRIGHTNESS gt 100 ORIGINAL RATIO 4 WIDE gt COLOR TEMP 4 PRESET gt PRESET 4 WARM gt BRIGHTNESS MENU D SUB 1024 X 768 60Hz E gt 50 gt 100 WIDE gt ad VOLUME 3 BRIGHTNESS ORIGINAL RATIO 4 e COLOR TEMP 4 PRESET gt 4 PRESET WARM gt ORIGINAL RATIO D SUB 1024 X 768 60Hz ag VOLUME az 50 X BRIGHTNESS gt 100 f ORIGINAL RATIO 4 WIDE 1 2 gt COLOR TEMP 4 PRESET gt PRESET 4 WARM gt COLOR TEMP D SUB 1024 X 768 60Hz G 50 E 100 ad VOLUME BRIGHTNESS ORIGINAL RATIO 4 WIDE gt e COLOR
5. base when the base is pulled up Otherwise you may be injured by the protruding sections of the stand a Product Handling with Care When you lift up or move the product Do Not hold or touch the front part of LCD panel It will damage the panel Please hold the Stand Body or plastic cover of the product Connecting the Display Removing the stand base 1 Place the monitor with its front facing downward on a cushion or soft cloth 2 While pressing the latches push the stand base in the direction of the arrow to separate from the stand body IMPORTANT a This illustration depicts the general model of connection Your monitor may differ from the items Shown in the picture a Do not cany the product upside down holding only the stand base The product may fall and get damaged or injure your foot Connecting the Display Positioning your display After installation adjust the angle as shown below 1 Adjust the position of the panel in various ways for maximum comfort a Tilt Range s Swivel Range 355 m 355 a Height Range maximum 4 33 inches 110 0 mm Please be sure to remove the Locking pin to adjust the height Connecting the Display AN a When adjusting the angle of the screen do not put your finger s in Aree the head of the monitor and the stand body You can hurt your inger s a When adjusting the height of the screen do not put your finger s in Pala the hea
6. view as shown When using a D Sub signal input cable connector for Macintosh gt MAC Mac adapter For Apple Macintosh use a separate plug adapter is needed to change the 15 pin high density 3 row D sub VGA connector on the supplied cable to a 15 pin 2 row connector Varies according to model Connect the signal input cable and tighten eee Beg eae eAUbION it up by turning in the direction of the arrow as shown in the figure Pc DVI D This feature is not available in all countries T Pc si PC Warning a Please pull the DVI cable first then pull DisplayPort cable for protect your finger Connecting the Display 3 Put the power cord and cables into the cable holder Cable Holder 4 Press the power button on the front panel to turn the power on When monitor power is turned on the Self Image Setting Function is executed automatically Only Analog Mode gt PROCESSING SELF IMAGE SETTING Power Button NOTE Self Image Setting Function This function provides the user with optimal display settings When the user connects the monitor for the first time this function automatically adjusts the display to optimal settings for individual input signals AUTO Function When you encounter problems such as blurry screen blurred letters screen flicker or tilted screen while using the device or after changing screen resolution press the AUTO fun
7. AL POWER REDUCTION TOTAL CO2 REDUCTION TOTAL POWER REDUCTION TOTAL CO2 REDUCTION OFF TOTAL POWER REDUCTION TOTAL CO2 REDUCTION On Screen Display OSD Selection and Adjustment Description Turn on the SUPER ENERGY SAVING fuction When current setting value is ON the SUPER SAVING color is green Turn off the SUPER ENERGY SAVING function Now the monitor is LED SAVING function When current setting value is OFF the SUPER SAVING color is gray Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values SUPER ENERGY SAVING gt RESET On Screen Display OSD Selection and Adjustment NOTE SAVING DATA W h es ce SUPER SAVING LED SAVING Saving Data depends on the Panel So those values should be different from each panel and panel vendor LG accumulate those values using integrated function with 10 minutes broadcast video signal LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function Troubleshooting Check the following before calling for service No image appears Is the power cord of the e Check and see if the power cord is connected display connected properly to the power outlet Is the power indicator Press the Power button light on Is the power indicator e
8. Button PROCESSING AUTO IMAGE ADJUSTMENT O INPUT Button SOURCE Hot key 5 EXIT Button O Power Button amp Power Indicator AUTO IMAGE ADJUSTMENT When adjusting your display settings always press the AUTO button before entering the On Screen Display OSD Only Analog Mode This will automatically adjust your display image to the ideal settings for the current screen resolution size display mode The best display mode is E2422PY 1920 x 1080 When two input signals are connected you can select the input signal D SUB DVI DP you want When only one signal is connected it is automatically detected The default setting is D Sub Exit the OSD On Screen Display Use this button to turn the display on or off The power indicator stays white if the display is running properly On Mode If the display is in Sleep Mode Energy Saving the power indicator is blinking white On Screen Display OSD Control Adjustment Screen Adjustment Making adjustments to the image size position and operating parameters of the display is quick and easy with the On Screen Display Control system A short example is given below to familiarize you with the use of the controls The following section is an outline of the available adjustments and selections you can make using the OSD To make adjustments in the On Screen Display follow these steps D SUB 1024 X 768 60Hz ad VOLUME C EO BRIGHTNESS gt 100 ORIG
9. INAL RATIO 4 WIDE gt e COLOR TEMP 4 PRESET gt MONITOR SETUP PRESET Press the discretionary Button then the main menu of the OSD appears To access a control use the corresponding Buttons Use the lt gt Buttons to adjust the image to the desired level Use the Button to select other sub menu items 3 4 Press the EXIT Button to exit from the OSD On Screen Display OSD Selection and Adjustment The following table indicates all the On Screen Display control adjustment and setting menus STE D SUB Analog signal input DVI D Digital signal input BJJ DP DisplayPort signal input Main menu Sub menu Supported input Description VOLUME COLOR TEMP I USER PRESET I NOTE a The order of icons may differ depending on the model 13 19 DSUB To adjust the volume op E l l l l I I I i l SAVING function ver l I I L l i To adjust the brightness of the screen op oe oO OC 3 a O N 4 mt 2 D Q O O x O j p D 4D o Boh Q D o Do Ss D r 5 D Q O 5 D T FF fe s m S D To customize the screen status i for a user s operating 1 environment Turn on the SUPER ENERGY i Turn off the SUPER ENERGY SAVING function Initialize the SUPER ENERGY SAVING and set to OFF mode On Screen Display OSD Selection and Adjustment mm
10. If the display is in power saving mode try moving flickering the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Do you see an OUT OF This message appears when the signal from the RANGE message on PC video card is out of horizontal or vertical the screen frequency range of the display See the Specifications section of this manual and configure your display again Do you see a CHECK This message appears when the signal cable SIGNAL CABLE between your PC and your display is not message on the connected Check the signal cable and try again screen Do you see a OSD LOCKED message on the screen Do you see OSD e You can secure the current control settings LOCKED when you so that they cannot be inadvertently changed push MENU button You can unlock the OSD controls at any time by pushing the MENU button for several seconds the message OSD UNLOCKED will appear Troubleshooting Display image is incorrect Display Position is e Press the AUTO button to automatically adjust incorrect your display image to the ideal setting On the screen e Press the AUTO button to automatically adjust background vertical your display image to the ideal setting bars or stripes are visible Any horizontal noise e Press the AUTO button to automatically adjust appearing in any your display image to the ideal setting image or c
11. ction button to improve resolution Connecting the Display Connecting the USB Universal Serial Bus Cable 1 You can use the USB port at the back of the monitor to connect peripherals USB mouse USB keyboard etc to the monitor not to the computer Two USB Downstream ports Connect these ports to a mouse E USB keyboard memory stick with F current spec under 100mA One USB Upstream port Connect this port to the downstream port of a computer laptop or USB monitor Your computer or USB monitor must support USB and have USB ports 2 The monitors USB terminal supports USB 2 0 and High Speed cables NOTE a This is a simplified representation of the rear view a This rear view represents a general model your display may differ from the view as shown Control Panel Functions Front Panel Controls MONITOR SETUP 2 aayo SUPER MENU ENERGY AUTO INPUT EXIT SAVING O MENU Button OSD LOCKED UNLOCKED This function allows you to lock the current control settings so that they cannot be inadvertently changed Press and hold the MENU button for several seconds The message OSD LOCKED should appear You can unlock the OSD controls at any time by pushing the MENU button for several seconds The message OSD UNLOCKED should appear SUPER ENERGY Use this button to enter SUPER ENERGY SAVING SAVING Button menu For more information refer to page 17 Control Panel Functions AUTO
12. d of the monitor and the stand base You can hurt your inger s WARNING a You do not need to replace the Locking pin after it is removed to adjust its height ERGONOMIC a It is recommended that in order to maintain an ergonomic and comfortable viewing position the forward tilt angle of the monitor should not exceed 5 degrees Connecting the Display Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise 1 Lift the monitor to its highest height to utilize the Pivot function 2 Landscape amp Portrait You can rotate the panel 90 clockwise Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function If the monitor head touches the Stand Base then the Stand Base could crack Head section Connecting the Display Connecting with the PC 1 Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off 2 Connect signal input cable Oo and power cord 2 in order then tighten the screw of the signal cable Q Connect DVI D Digital signal Cable Connect D sub Analog signal Cable Connect Audio Cable Connect DisplayPort Cable Separate purchase NOTE a This is a simplified representation of the rear view a This rear view represents a general model your display may differ from the
13. haracters are not clearly e Check Control Panel gt Display gt Settings portrayed and adjust the display to the recommended resolution or adjust the display image to the ideal setting Set the color setting higher than 24 bits true color IMPORTANT a Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend resolution a If the recommended resolution optimal resolution is not selected letters may be blurred and the screen may be dimmed truncated or biased Make sure to select the recommend resolution a The setting method can differ by computer and O S Operation System and resolution mentioned above may not be supported by the video card performance In this case please ask to the computer or the video card manufacturer o Troubleshooting Display image is incorrect The screen color is e Check if the signal cable is properly connected mono or abnormal and use a screwdriver to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel Settings The screen blinks e Check if the screen is set to interlace mode and if yes change it to the recommend resolution Do you see an Unrecognized monitor Plug amp Play VESA DDC monitor found message Have you installed the e Be sure to ins
14. s subject to change without notice Preset Modes Resolution E E2422PY Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 720 x 400 31 468 70 2 640 x 480 31 469 60 3 640 x 480 37 500 75 4 800 x 600 37 879 60 5 800 x 600 46 875 75 6 1024 x 768 48 363 60 7 1024 x 768 60 023 75 8 1152 x 864 67 500 15 9 1280 x 1024 63 981 60 10 1280 x 1024 79 976 75 11 1680 x 1050 65 290 60 12 1920 x 1080 67 500 60 Recommend Mode Indicator 0 DB LED Color On Mode White Sleep Mode White Blinking Off Mode Off Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device A 1 After moving the product to face downward make sure to place it on a soft cloth or a cushion to avoid surface Ew damage 2 Separate the head and the stand with the use of a screwdriver Installing the Wall mount plate 3 Install the Wall mount plate Wall mount plate Separate purchase This is stand type or wall mount type and is connectable with Wall mount plate Please refer to the installation guide for more details which is provided when Wall mount plate is purchased Wall Mount pad lt Screw Mounting In
15. tall the display driver from the display display driver driver CD or diskette that comes with your display Or you can also download the driver from our web site http www lg com e Make sure to check if the video card supports Plug amp Play function Specifications E2422PY 60 9 cm 24 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 60 9 cm 0 276 x 0 276 mm Pixel pitch Horizontal Freq 30 kHz to 83 kHz Automatic Vertical Freq 56 Hz to 75 Hz Automatic Input Form Separate Sync Digital Signal Input 15 pin D Sub Connector DVI D Connector Digital Input Form RGB Analog 0 7 Vp p 75 ohm Digital Max VESA 1920 x 1080 60 Hz Recommend VESA 1920x 1080 60 Hz DDC 2B Digital DDC2AB Anlaog USB2 0 On Mode 22 W Typ Sleep Mode O03 W Off Mode lt 0 3 W With Stand Without Stand Width 56 91 cm 22 40 inch Height 43 26 cm 17 03 inch Min Width 56 91 cm 22 40 inch Height 34 19 cm 13 46 inch Depth 27 11 cm 10 67 inch Depth 6 30cm 2 48 inch Weight excl packing 4 8 kg 10 56 Ib Tilt 5 to 15 Swivel 259 Height 110 mm 4 33 inch AC 100 240 V 50 60 Hz 1 2 A Operating Conditions Temperature 10 C to 35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Attached Detached O Wall outlet type NOTE a Information in this document i
16. terface Dimension gt Hole spacing 100 mm x 100 mm Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores NOTE a VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications a Please use VESA standard as below 784 8 mm and under 30 9 inch Wall Mount Pad Thickness 2 6 mm Screw 6 4 0 mm x Pitch 0 7 mm x Length 10 mm 787 4 mm and above 31 0 inch Please use VESA standard wall mount pad and screws LG Make sure to read the Safety Precautions before using the product Keep the OWNER S MANUAL CD in an accessible place for furture reference The model and serial number of the SET is located on the back or one side of the SET Record it below should you ever need service MODEL SERIAL Life s Good ENERGY STAR is a set of power saving guidelines issued by the U S Environmental Protection Agency EPA q As an ENERGY STAR Partner LGE U S A Inc has determined that this product meets the ENERGY STAR guidelines for energy efficiency
Download Pdf Manuals
Related Search