Bogen DDU250 microphone
Contents
1. 52V DC Cable 20 ft quad cable Connector Mini XLR Female with Mini XLR to standard XLR Male adapter Dimensions 1 14 D x h Dia Product Weight 5 oz Material Copper Finish Matte black finish OdB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph 0 Frequency Response Graph dB Frequency Response Magn dB re 1 V MBAR 0 7 m 0 On axis 180 on axis Accessories CABLES MAC Microphone Cable Assembly e For handheld models e Female XLR to stripped and tinned wires e 25 cable e 2 conductor plus shield e 1 Ib XLR25 Microphone Cable e For handheld models e Male XLR to female XLR e 25 cable e 2 conductor plus shield 12 oz CLIPS MC27 Handheld Clip e For handheld models e Black flexible impact resistant plastic WINDSCREENS WSGCU250 Windscreen for GCU250 e Foam windscreen for use with GCU250 microphone A meer WSGCU250 MAC XLR25 SF4 MOUNTS MSM Shock Isolated Microphone Base e For GCU250 and GDU150 e Provides superior mechanical noise and vibration isolation e Lightweight ABS material housing e XLR female connector e Thick shock absorbing rubber cushion e Ideal fixture for boardrooms conference rooms pulpits podiums and newsrooms e 43 4 W x 1 7 4 H x 4 D 6 ounces STANDS DS3 Desk Stand e 3 chrome finish tube 4 high with base e 6 diameter cast iron base 3 lb SF4 Floor Stand e2. e Cardioid pickup pattern e Clean accurate vocal reproduction with low ambient noise e Snap on windscreen e Wide frequency response with rich treble and bass e Thin unobtrusive construction for close up use e Breath wind filter included e Durable all metal case with non glare black finish Specifications MIC Type Gooseneck Element Back electret condenser Polar Pattern Cardioid Impedance 250 ohm Frequency Response 50 Hz to 18 kHz Sensitivity 65 dB 3dB Max SPL 1 THD gt 130 dB S N Ratio gt 65 dB Phantom Voltage Req 9V 52V DC Connector XLR Male Dimensions 18 12 L 5 h adjustable lower stalk with 9 h rigid upper section Product Weight 4 oz Material Copper Finish Non glare black finish OdB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph 0 Frequency Response Graph 0 m 0 ON axis dB Frequency Response Magn dB re 1 V M BAR m 180 on axis 50 60 70 80 90 100 Description The GDU150 is a dynamic gooseneck microphone that features a durable all metal case with a non glare black finish It has a 10 long fully flexible neck with an integral XLR mounting base Features e Cardioid pickup pattern e Outstanding speech intelligibility feedback rejection and user sound isolation e High sound pressure capability and low sensitivity to breath pop noise e Superior shock mount system to reject handling and cable noise e Rugged rel
3. uniform from 50 Hz to 12 kHz with a presence boost at 2 kHz for natural intelligible sound Impedance shall be 400 ohms A sealed push to talk microswitch shall be mounted on the microphone hous ing The sensitivity shall be 76 dB 3dB The microphone shall be furnished with a 19 chrome plated flexible gooseneck and mounting flange and seven feet of rugged synthetic jacketed 4 conductor 2 shielded cable The microphone shall have a black plastic cap and housing with chrome plated screen and shall measure 4 long with a maximum diameter of 1 Removable set screws shall secure the front cap to the microphone and the microphone to the gooseneck Dimensions shall be 23 h L Weight shall be 1 4 Ib SCU250 The microphone shall be a Bogen Model SCU250 It shall be a cardioid back electret condenser boundary microphone with a frequency response of 20 Hz to 18 kHz and a 250 ohm impedance The sensitivity shall be 58 dB 3dB and the signal to noise ratio greater than 65 dB It shall have a matte black finish and will require an external 9V 52V DC phantom power source It shall have a male XLR connector Dimensions shall be 2 7 4 W x H x 3 D Weight shall be 11 oz W CU250 The microphone shall be a Bogen Model WCU250 hang ing microphone It shall be a cardioid back electret condenser micro phone with a frequency response of 50 Hz to 18 kHz and a 250 ohm impedance The sensitivity shall be 65 dB 3dB and th
4. 100 Hz to 12 kHz and a 500 ohm impedance The sensitivity shall be 76 dB 3dB and the signal to noise ratio greater than 65 dB It shall have a push to lock push to talk switch and a matte black finish It shall have a 10 4 conductor 2 shielded cable Dimensions shall be 4 14 W x 18 1 H x 6 4 D Weight shall be 3 14 Ib GCU250 The microphone shall be a Bogen Model GCU250 It shall be a cardioid back electret condenser gooseneck microphone with a frequency response of 50 Hz to 18 kHz and a 250 ohm impedance The sensitivity shall be 65 dB 3dB and the signal to noise ratio greater than 65 dB Max SPL 1 THD shall be greater than 130 dB It shall have a non glare black finish The GCU250 shall have an XLR male type connector It requires an external 9V 52V DC phantom power source Dimensions shall be 18 4 L Weight shall be 4 ounces GDU150 The microphone shall be a Bogen Model GDU150 It shall be a cardioid dynamic gooseneck microphone with a frequency response of 100 Hz to 12 kHz and a 500 ohm impedance The sensi tivity shall be 75 dB 3dB and the signal to noise ratio greater than 65 dB It shall have a push on push off talk switch mounted on its base and a non glare black finish The GDU150 shall have an XLR Male type connector Dimensions shall be 16 s L Weight shall be 11 oz MGN19 The microphone shall be a Bogen Model MGN19 dynam ic type omni directional microphone Frequency response shall be
5. by open circuit Polar Graph Frequency Response Graph 0 on axis dB Frequency Response Magn dB re 1 V M BAR 180 on axis 60 70 80 90 100 110 Description The HDO100 is an attractive dynamic microphone perfectly suited for public address applications and instrument sound reproduction Features e Omni directional pickup pattern Uniform pickup of sound from all directions with no deterioration in frequency response e Clean clear reproduction with minimal ambient sound e Low sensitivity to handling noise and stage vibrations e Rugged reliable construction e Internal rubber shock isolation system e Lockable silent on off reed switch e Includes mic clip Specifications MIC Type Handheld Element Moving coil dynamic Polar Pattern Omni directional Impedance 500 ohm Frequency Response 70 Hz to 15 kHz Sensitivity 72 dB 3dB S N Ratio gt 65 dB Connector XLR Male Switch With silent on off switch lockable silent reed switch Dimensions 6 h D x 1 14 Dia Product Weight 13 oz Material Zinc die cast Finish Rubberized black finish 0dB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph Frequency Response Graph 0 mums 0 On axis dB Frequency Response Magn dB re 1 V MBAR m 180 on axis 60 70 80 90 100 110 MBS1000A Desktop Paging DDU250 Dynamic Desktop Description The MBS1000A is a dy
6. housing Dimensions 23 h L Product Weight 1 4 Ib Material Plastic housing Finish Black plastic cap and housing chrome gooseneck and mounting flange OdB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph Frequency Response Graph m 0 on axis Frequency Response Magn dB re 1 V M BAR dB SCU250 Boundary Description The SCU250 is an unobtrusive surface mount boundary condenser microphone ideal for meeting rooms conferences and stage productions where minimum visibility is ideal It requires an external 9V 52V DC phantom power supply Features e Cardioid pickup pattern e Full rich reproduction of voice and music e Well suited in capturing the sound source and immediate surroundings e Low sensitivity to stage vibration and thumping noise e Mounting keyways for hanging or for secure attachment to the mounting surface e Excellent user sound isolation with excellent feedback rejection e Heavy duty metal case e Low impedance balanced output WCU250 Overhead Hanging Description The WCU250 is an electret condenser professional microphone perfectly suited for picking up audio from large groups Because it can hang from the ceiling and is compact in size the WCU250 is very useful in minimizing visual distraction for the performers and the audience alike and limits intrusion into the working space The WCU250 cable is terminated by a mini XLR female A mini
7. to noise ratio greater than 65 dB It shall have a silent on off lockable reed switch and a rub berized black finish The HDO100 shall have an XLR Male connector Dimensions shall be 6 2 D x 1 h Dia Weight shall be 13 oz MBS1000A The microphone shall be a Bogen Model MBS1000A It shall be a dynamic type cardioid dual impedance desktop micro phone The frequency response shall be uniform from 45 Hz to 15 kHz Impedance shall be selected via a switch on the underside of the microphone base Impedances shall be 500 ohms matching 125 ohms to 1 000 ohms or 50 000 ohms matching 50k ohms or greater Voltage output shall be 72 dB at Lo Z and 52 dB at Hi Z The microphone shall provide push to talk and lift to talk operation The push to talk bar shall include a locking mechanism Provision shall be included to defeat lift to talk operation The microphone and relay switching shall be accomplished with long life DPDT professional leaf switches The microphone circuit shall be wired normally open The microphone shall be in an ABS plastic case with a rubberized black fin ish and a die cast base It shall be supplied with 7 feet of 4 conductor cable 2 conductors individually shielded and shall be permanently wired into the microphone Dimensions shall be 4 W x 9 H x 5 74 D Weight shall be 1 s Ib DDU250 The microphone shall be a Bogen Model DDU250 It shall be a cardioid dynamic desktop microphone with a frequency response of
8. 34 to 62 adjustable height e Round 10 diameter die cast base 9 Ib e Grip action clutch and chrome plated tubing SB6 Floor Boom Stand e Telescopic floor stand e Sliding 30 boom arm e 34 to 62 adjustable height 6 Ib e Chrome plated tubing e Tripod base DS3 Architect and Engineer Specifications HDU250 The microphone shall be a Bogen Model HDU250 It shall be a cardioid dynamic handheld microphone with a frequency response of 50 Hz to 18 kHz and a 250 ohm impedance The sensi tivity shall be 72 dB 3dB and the signal to noise ratio greater than 65 dB It shall have a sliding type on off switch and a rubberized black finish The HDU250 shall have an XLR Male connector Dimensions shall be 7 D x 2 Dia Weight shall be 13 oz HDU150 The microphone shall be a Bogen Model HDU150 It shall be a cardioid dynamic handheld microphone with a frequency response of 70 Hz to 15 kHz and a 500 ohm impedance The sensi tivity shall be 70 dB 3dB and the signal to noise ratio greater than 65 dB It shall have a sliding type on off switch and a rubberized black finish The HDU150 shall have an XLR Male connector Dimensions shall be 6 h D x 1 h Dia Weight shall be 13 oz HDO100 The microphone shall be a Bogen Model HDO100 It shall be an omni directional dynamic handheld microphone with a frequency response of 70 Hz to 15 kHz and a 500 ohm impedance The sensitivity shall be 72 dB 3dB and the signal
9. 500 ohm Dimensions 4 Is W x 9 k H x 5 7k D Frequency Response 100 Hz to 12 kHz Product Weight 1 4 Ib Sensitivity 76 dB 3dB Material ABS plastic S N Ratio gt 65 dB Finish Rubberized black finish Cable 10 ft 4 conductor 2 shielded 0dB 1V MBAR 1 000 Hz indicated by open circuit Switches Push to lock and push to talk Dimensions 4 14 W x 18 14 H x 6 4 D Product Weight 3 h Ib Material Zinc die cast Finish Matte black 0dB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph Polar Graph Frequency Response Graph Frequency Response Graph 0 n 0 on axis m 0 on axis dB Frequency Response Magn dB re 1 V M BAR 180 on axis 60 70 0 dB Frequency Response Magn dB re 1 V M BAR 180 on axis 60 70 Jli 80 80 yO AaS l a al 90 l 90 100 110 100 110 GCU250 Condenser Gooseneck GDU150 Dynamic Gooseneck Description The GCU250 is a high performance partially rigid adjustable gooseneck con denser microphone capable of meeting the stringent demand of today s conference and PA systems It is an intel ligent choice for sound reinforcement applications It has an integral XLR male connector mounting base and requires a 9V 52V DC phantom power source Slim and compact the GCU250 is designed to minimize intrusion between the user and the audience Features e 5 1 4 Adjustable Neck e Phantom power operated
10. BOGEN MICROPHONES Models HDU250 HDU150 HDO100 MBS1000A DDU250 GCU250 GDU150 MGN19 SCU250 WCU250 Introduction Bogen s line of microphones come in a variety of types and styles handheld desktop gooseneck boundary and overhead hanging to meet any and all application needs ranging from paging systems to instrument and vocal reproduction Each is ruggedly constructed to withstand the demands of sound installations Each microphone provides clear natural intelligible sound reproduction with accurate response and dependable performance Bogen s microphone models are crafted with professional grade features including models with rubberized grips quiet on off glide switches dent proof screens contemporary designs and a variety of accessories including stands mounting clips windscreens and cables Index Handhelds HDU250 ADUT50 a VO csc seca ars ccc seee ceca sea EE EEE EES 1 2 Desktops MBS 1000A DDU250 casetoeettens nse cece tsa an crsnsw este detcesnecmeancecerescietenatenebele sere tanet cat ayadeaiet shacansadeanessatesuatashceitasescdacsan sonar Eaa 3 Goosenecks GDU250 GCU150 MGN19 saa oe seats ecceeenticed terete cen tee cattentcacseumuay oases saaevecneseerscoesesiacsaauste cadens aetseoeauneotecodtesreransuehscacts 4 5 Boundwy 3C 92 5 0 assii na rere eter ea ate oemne reer too Fer mM ee AS eter tre ete E Sree remy Seer eee err reer meres ornre re ree ne era 6 Gig aro aly Gag Uo 0 Paneer anna rene A
11. XLR to standard XLR adapter included houses the pre amplifier It requires an external 9V 52V DC phantom power supply rr Features e Cardioid pickup pattern e Utilizes a superior quality state of the art transducer element and circuitry e Transformerless direct coupled design to ensure clear transparent reproduction of even the most delicate transients at the highest output levels Specifications MIC Type Surface mount Element Back electret condenser Polar Pattern Cardioid Impedance 250 ohm Frequency Response 20 Hz to 18 kHz Sensitivity 58 dB 3dB S N Ratio gt 65 dB Phantom Voltage Rea 9V 52V DC Cable 26 ft quad cable Connector XLR Male Dimensions 2 7 4 W x 2 H x 3 4 D Product Weight 11 oz Material Zinc die cast Finish Matte black finish OdB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph 0 Frequency Response Graph dB Frequency Response Magn dB re 1 V MBAR 0 on axis as 180 on axis e Clear crisp sound with outstanding ambient noise isolation e Wide frequency response with excellent off axis rejection e Low profile compact hanging type design e Integrated metal hanger Specifications MIC Type Overhead hanging Element Back electret condenser Polar Pattern Cardioid Impedance 250 ohm Frequency Response 50 Hz to 18 kHz Sensitivity 65 dB 3dB Max SPL 1 THD gt 130 dB S N Ratio gt 65 dB Phantom Voltage Rea 9V
12. anne EET ere nee sent nes een eee ee EAEE eer ee eee ent eee ere eee eee ene ere renee 6 PSS OE creas E esse capensis AEE AN AEAEE g sve as seas AEEA A OOA EA E EE E OEN ENE 7 Architect and Engineer Specificati nS vyascrcsc core aupses ca court cep ecetocencesesuete ecseiraseaeneceessetcousneu ve desar tescacu snare ressacunnescyceseeseetscapbevesbcgcasaeaucactecctadeeecseearsaoeoeeecart 8 HDU250 Professional Stage Description Specifications The HDU250 is a dynamic microphone MIC Type Handheld ideal for acoustically demanding envi os Element Moving coil dynamic ronments It features a heavy zinc die Polar Pattern Cardioid cast case with a rigid low noise cable Impedance 250 ohm mount system and a lockable silent reed Frequency Response 50 Hz to 18 kHz switch It has an extra low handling Sensitivity 72 dB 3dB noise floating shock mounted S N Ratio gt 65 dB Neodymium capsule Connector XLR Male Switch With sliding type on off switch Features lockable silent reed switch e Cardioid pickup pattern Dimensions 7 D x 2 Dia e High sensitivity Neodymium capsule Product Weight 13 oz e High output design with excellent gain before feedback Material Zinc die cast characteristics Finish Rubberized black finish e High sound pressure capability without distortion and low OdB 1V MBAR 1 000 Hz indicated by open circuit sensitivity to breath pop noise e Efficient shock mount system reduces handling and cable noise e Rugged re
13. e signal to noise ratio greater than 65 dB It shall have a matte black finish and will require an external 9V 52V DC phantom power source with a con necting cable of 20 It shall have a female mini XLR connector with a mini XLR to standard XLR male adapter Dimensions shall be 1 14 D x th dia Weight shall be 5 ounces BOGEN COMMUNICATIONS INC 50 Spring Street Ramsey NJ 07446 U S A Tel 201 934 8500 Fax 201 934 9832 www bogen com
14. iable construction e Integral multi layer breath wind filter e Durable all metal case with non glare black finish e Silent push on push off talk switch on base Specifications MIC Type Gooseneck Element Moving coil dynamic Polar Pattern Cardioid Impedance 500 ohm Frequency 100 Hz to 12 kHz Sensitivity 75 dB 3dB S N Ratio gt 65 dB Connector XLR Male Switch Push on push off talk switch on base Dimensions 16 9 4 L Product Weight 11 oz Material Zinc Finish Non glare black finish OdB 1V MBAR 1 000 Hz indicated by open circuit Polar Graph Frequency Response Graph a 0 on axis a 180 on axis a dB Frequency Response Magn dB re 1 V MBAR a Van Ve a V ee IN AANZE A N aid Abd btn A A MGN19 Dynamic Gooseneck Description The MGN19 is a push button acti vated dynamic microphone that is ideal for paging and commercial applications Features e Omni directional pickup pattern e Push to talk switch on MIC housing e Rugged reliable design for quality i long term use under the most strenuous handling conditions e Chrome plated screen and 19 L gooseneck with black plastic housing e Contact closure leads Specifications MIC Type Gooseneck Element Dynamic Polar Pattern Omni directional Impedance 400 ohm Frequency Response 50 Hz to 12 kHz with 2 kHz boost Sensitivity 76 dB 3dB Cable 7 of 4 conductor 2 shielded Switch Push to talk on
15. liable construction e Integral multi layer breath wind filter Polar Graph e Low impedance operation e Lockable silent on off reed switch e Includes mic clip Frequency Response Graph 0 m m 0 on axis dB Frequency Response Magn dB re 1 V M BAR 180 on axis 60 ps 54 5090 01E 1201 2003 Bogen Communications Inc Specifications subject to change without notice Hz HDU150 Handheld Stage HDO100 Public Address Description The HDU150 is an attractive dynamic all purpose microphone ideally suited for a wide variety of vocal and sound reinforce ment applications Features e Cardioid pickup pattern e Crisp clear sound e Wide dynamic range with high end sparkle and minimum feedback e Rigid low noise cable mount system e Low sensitivity to breath and popping sounds Durable ball shaped design e Rubber shock mount system for attenuation of handling and cable noise e Lockable silent on off reed switch e Includes mic clip Specifications MIC Type Handheld Element Moving coil dynamic Polar Pattern Cardioid Impedance 500 ohm Frequency Response 70 Hz to 15 kHz Sensitivity 70 dB 3dB S N Ratio gt 65 dB Connector XLR Male Switch With sliding type on off switch lockable silent reed switch Dimensions 6 h D x 1 14 Dia Product Weight 13 oz Material Zinc die cast Finish Rubberized black finish 0dB 1V MBAR 1 000 Hz indicated
16. namic dual imped ance desktop microphone designed for all industrial and commercial public address and paging applications Features e Uni directional pickup pattern e Push to talk or lift to talk operation e Locking mechanism with push to talk bar for long announcements e Rubberized black finish with die cast base e Contact closure leads Description The DDU250 is a_ high quality dynamic gooseneck desktop micro phone ideal for any podium or PA system The gooseneck permits the user to adjust the microphone s angle and height to suit the user s needs Features e Cardioid pickup pattern e 16 long fully flexible gooseneck stalk that is shock mounted to a heavy zinc die cast base e Push to lock and push to talk switches Specifications e 10 foot cable with external contact closure outputs for the talk MIC Type Desktop switches Element Dynamic e Excellent speech intelligibility with low ambient noise Polar Pattern Cardioid e Effective feedback control Impedance Lo Z 500 ohms Hi Z 50k ohms e Low sensitivity to breath and popping sound switch selectable e Slim compact design to minimize distraction to the user Frequency Response 45 Hz to 15 kHz Sensitivity Hi Z 52 dB 3 dB Specifications Lo Z 72 dB 3 dB MIC Type Desktop Cable 7 of 4 conductor 2 shielded Element Moving coil dynamic Switch Locking push to talk lift to talk Polar Pattern Cardioid impedance selector Impedance
Download Pdf Manuals
Related Search