Adtran 1 x OC-12 1310 (TX)/1550 (RX)nm SFP
Contents
1. two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by ADTRAN could void the user s authority to operate this equipment ADRAN A CAUTION 22 Per GR 1089 CORE the ADTRAN system that the SFP is being deployed in is designed and intended for installation as part of a Common Bonding Network CBN The ADTRAN system that the SFP is being deployed in is not designed nor intended for installation as part of an Isolated Bonding Network IBN Per GR 1089 CORE Section 9 the Bidirectional SFP does not have an internal DC connection between battery return and frame ground The Bidirectional SFP can be installed in a DC I isolated or DC C common installation For installations where other cards or the host system have internal connections between battery return and frame ground the system would be intended for deployment only in a DC C installation The ADTRAN system chassis frame ground terminal must be connected to a reliable earth ground to ensure that the metal enclosure of the Bidirectional SFP is properly grounded via the backplane connector The Small Form Factor Pluggable OC 12 Bidirectional 1310 1550 nm is a Class 1 Laser Product and complies with the Laser Safety requirements of FDA 21 CFR 1040 11 EN60825 1 and EN60825 2 The Bidirectional SFP is NRT2. ADRAN fo HES 010 y V Y Product P N 1442704PG1 Small Form Factor Pluggable OC 12 Bidirectional 1310 1550 nm jobAid E3 Issue Date October 2010 Document P N 61442704PG1 22A DESCRIPTION The Small Form Factor Pluggable OC 12 Bidirectional 1310 1550 nm Bidirectional SFP plugs into ADTRAN equipment designed to accept Small Form factor Pluggables SFPs Installed into an appropriate host unit the Bidirectional SFP provides an OC 12 interface to the supporting system NOTE To ensure compatibility refer to the documentation provided with the host module The following features are supported on the Bidirectional SFP SONET OC 12 compatible 622 Mb s single fiber operation 15 km maximum optical span Due to compliance certification requirements only SFPs supplied by ADTRAN are to be used with the host module ADTRAN cannot certify system integrity with other SFPs SPECIFICATIONS Optical Specifications Optical transmit level 8 dBm to 15 dBm Optical receive level 8 dBm to 28 dBm Transmit Wavelength 1310 nm Receive Wavelength 1550 nm Optical budget 12 1 dBm Optical connectors LC Extended Environmental Support Operational temperature range 40 C to 65 C Storage temperature range 40 C to 85 C Relative humidity to 95 noncondensing INSTALLATION To install the Bidirectional SFP into an appropriate module complete the following steps 1 Inspec
3. L Listed and CB Certified to all applicable American and European safety standards NOTE The Gigabit Ethernet port s are optical and therefore are not classified as any type of port as defined in Appendix B of GR 1089 CORE Issue 5 The Bidirectional SFP is designed to meet the following environ mental classes ETSI EN 300 019 1 1 Classification of environmental conditions Storage Class 1 2 ETSI EN 300 019 1 2 Classification of environmental conditions Transportation Class 2 3 ETSI EN 300 019 1 3 Classification of environmental conditions Stationary use at weather protected locations Class 3 3 The equipment is designed to function without degradation during exposure to all test severities per Class 3 3 The Small Form Factor Pluggable OC 12 Bidirectional 1310 1550 nm meets EU RoHS Directive 2002 95 EC and or applicable exemptions Refer to www adtran com for further information on RoHS WEEE Warranty ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service Warranty information can be found online at www adtran com warranty 2010 ADTRAN Inc All Rights Reserved NOTE This Bidirectional SFP is compliant with SFF 8472 Digital Diagnostics Monitoring Interface for Optical Transceivers Revision 9 3 This Bidirectional SFP is compliant with the Small Form Factor Pluggable SFP Multi Source Ag
4. reement MSA This Bidirectional SFP is designed to be deployed in GR 3108 CORE environmental class 1 or 2 as defined in GR 3108 CORE Issue 2 ADTRAN CUSTOMER CARE From within the U S 1 800 726 8663 From outside the U S 1 256 963 8716 PRICING AND AVAILABILITY 1 800 827 0807 61442704PG6 1 2Ak ar hs CAUTION SUBJECT TO ELECTROSTATIC DAMAGE OR DECREASE IN RELIABILITY HANDLING PRECAUTIONS REQUIRED
5. t the Bidirectional SFP If damaged file a claim with the carrier and then contact ADTRAN Customer Support Do not remove the protective end cap from the SFP until the fiber optic cable is ready to be connected 2 Insert the Bidirectional SFP into the SFP cage on the module Ensure that the manufacturer s label on the SFP is facing upward for correct installation 3 Slide the Bidirectional SFP all the way into the receptacle until there is an audible click NOTE The latch on the SFP is used to remove the SFP from the cage on the circuit card SAFETY AND REGULATORY COMPLIANCE d Electrostatic Discharge ESD can damage electronic modules When handling modules wear an antistatic discharge wrist strap to prevent damage to electronic components Place modules in antistatic packing material when transporting or storing When working on modules always place them on an approved antistatic mat that is electrically grounded The SFP meets or exceeds all the applicable requirements of NEBS Telcordia GR 63 CORE GR 1089 CORE and ETSI EN 300368 The Bidirectional SFP is intended for deployment in Central Office type facilities EEEs EECs and locations where the NEC applies for example Customer Premises The SFP is to be installed in ADTRAN products in Restricted Access Locations only and installed by trained service personnel This device complies with Part 15 of the FCC rules Operation is subject to the following
Download Pdf Manuals
Related Search