KRAM 68631 car kit
Contents
1. Interface Leads Interface Leads Instruction for Line In cable 68631 for Chevrolet 2002 with Onstar Made in Denmark by VDNAN o Kram Telecom A S rira EN631 Interface Leads Product description Line In cable 68631 for Chevrolet 2002 with Onstar Interface Leads are used for car stereos with a Line In func tion or VDA preparation It enables the use of the car speakers when answering making calls from your cell phone by using the radios built in mute function Speaker function This is achieved by connecting the carkit di rectly to the cars Line In input VDA connector By using the radios built in relays the telephone conversation is sent through the car speakers while the radio is muted This way you will achieve a perfect hands free sound without interfer ence from the car radio For a complete cable set two item no is required The first is a car specific Interface Lead The second is a carkit specific carkit adaptor cable Power supply of the carkit All Interface Leads are delivered with a power connector for the carkit This way you avoid cut ting the cars wiring loom Please check the radio instruction manual for special issues regarding the connection and set up of the radio when con necting a carkit See our complete Interface program on www kram dk Interface Leads Installation description Line In cable 68631 for Chevrolet 2002 with Onstar 1st Connect the relay box between the two 8 pin2. and the 6 pin connector The side of the box labelled Radio and one single 8 pin connector should be connected to the 8 pin closest to the radio connector 2nd Remove the radio and disconnect the 24 amp 12 pin connector from rear of the radio 3rd Insert the Interface lead between the connectors on the radio and the connector on the cars wiring loom Ath Now connect the Carkit adaptor to the Interface Lead and con nect the Carkit adaptor to the carkit Note Please check if there is an ignition signal on the blue wire If no ignition signal is available the blue wire can be connected to the red 12v constant with the bullet connectors or a ignibox Item no 69600 can be used to cre ate an artificial ignition 5th Refit the radio 6th After the installation please adjust the telephone volume level to it s middle position and adjust volume level as described in the radios instruction manual When the Interface Lead is installed correctly it will redirect your call through the car front speakers and allow the telephone vol ume to be adjusted using the radios volume control
Download Pdf Manuals
Related Search