Home

Silverstone LC18S-V64

1. This is a unique product please read the following detailed installation guide we have prepared meticulously for you Special note Installation of LC18 requires the use of a 125mm long excluding the handle Phillips screw driver 1 Remove four screws from the back panel as shown J ff 3 Remove four screws from the support brace to uninstall it 4 Remove screw holding the combo drive bracket as shown 5 Pull and lift to remove the combo 6 Install optical drive and secure with drive bracket screws 7 The LC18 combo drive bracket can accommodate two optical drives and one 3 5 device such as floppy drive or card reader LC18 comes standard with card reader 8 Remove screws from both sides 13 Reinstall combo drive bracket back into the case and secure with screw into the case and secure with screws of the hard drive bracket as shown 14 Reinstall hard drive bracket back 9 Install hard drives into the drive bracket there is room for five hard drives 15 Connect 4pin connector from the touch panel to the power supply s 4pin plug 19 Connect and install all necessary wires and cables for your system and place the top cover back onto the case 20 Installation complete 21 LC18 with optional rackmount ears installed 10 Insert motherboard standoffs into the chassis as needed 16 Connect the USB plug from the touch panel to
2. an available USB pin header on your motherboard 11 Insert motherboard into the case and secure with screws 12 Install power supply and secure with screws 17 Connect the external VGA cable to the back of the case and to an available D SUB output from either your motherboard or graphics card 18 Reinstall support brace back into the case and secure with screws

Silverstone LC18S-V64

Contents

Download Pdf Manuals

Related Search

Related Contents