StarTech.com Black 3 Drive Serial ATA Backplane
Contents
1. Reset LED will flash To stop the alarm press the Reset button HD1 HD etc The HD buttons LEDs on the front of the backplane serve as both the power switches and power LEDs for each drive To turn power to the drive on or off push the corresponding HD button Do not turn off power when the drive is in use When the drive is powered the corresponding LED will be lit Note The default temperature at which the alarm will sound is 60 C 140 F Using jumpers on the back of the backplane you can also set the temperature to 55 C 131 F or 65 C 149 F Fan Sensor The fan sensor LED on the front of the backplane indicates the activity of the backplane s fan If the fan sensor LED is lit green the fan is working properly If the fan fails the fan sensor LED will be lit red SQ Technical Specifications SATABAY3BK SATABAY4BK CE a 3 Connectors 3 x 7 pin SATA 4x 7 pin SATA 2 x 15 pin SATA 2 x 15 pin SATA 2 x 4 pin LP4 2 x 4 pin LP4 Drive Connection Cable less connection Aluminum and plastic LEDs 3 x Hard drive activity 4 x Hard drive activity 1 x Reset 1 x Fan status 1 x Reset 1 x Fan status Over heating alarm Dimension 5 75 x 7 95 x 3 39 5 75 x 7 95 x 4 96 146 x 202 x 86 mm 146 x 202 x 126 mm 286 bs 13 Kes 352 16Kg9 NN G Technical Support StarTech com s lifetime technical support is an integral part of our commitment to provide industry leading solutions If you ever need help2. SATA BACKPLANE Serial ATA Backplane SATABAY3 SATABAY3BK SATABAY4 1 1 EAS Instruction Guide The Professionals Source For Hard to Find Computer Parts OO EEE Table of Contents Introduction Mp linke spe Dane 2 Installation ccc ccc cece hne 3 Using Your Backplane sears ieres pe N AA E o a EE S 3 Technical Specifications spss erisir ioi eect cece corr 4 Technical Support riie ete EEE A eect nee eee rro 5 Warranty Information 6 ccc eee ete eee Henn 5 I LLLEEEEEEEEIEERIEIEIICLCLLELLLOLUCTLEIcLUOGJBJ ALRGIStTI LUIUIILULRoLOOHHOAAULLILLALHLCULLALILLIULLULLRI S EAD Introduction Thank you for purchasing a StarTech com Serial ATA backplane The perfect solution for building hot swappable Serial ATA RAID arrays these backplanes can support up to three SATABAY3 SATABAY3BK or four SATABAY4 SATABAY4BK Serial ATA 150 3 5 inch drives each in their own independent removable drive drawer An 8 cm rear fan ensures plenty of air movement over the drives to maintain ideal operating temperatures Features Compliant with Serial ATA Specification 1 0 Equipped with an 8cm rear mounted ball bearing fan to ensure all your hard drives remain cool e Supports RAID applications 0 1 5 Provides an audible buzzer alarm when overheating occurs Uses an easy push button mechanism for opening hard drive trays LEDs continuously monitor hard drive and fan activity Supports Serial ATA 150
3. hard drives with data transfer rates of up to 150 MBytes sec Uses thin flexible Serial ATA cables for easier internal connections and improved airflow Package Contents e 1x Serial ATA backplane e 7 pin Serial ATA signal cables lt gt Installation 1 Remove one of the drive trays by pressing on the left side of the drive tray This will cause the tray s arm to swing out Hold the arm and pull the tray out 2 Place the hard drive into the tray Line up the holes in the bottom of the tray with the holes in the bottom of your drive Use screws to secure the hard drive to the tray 3 Slide the tray back into the slot When the tray is all the way back into the slot press the arm back in until you hear a click sound This indicates that the tray and hard drive are properly installed 4 Repeat these steps for the other hard drives 5 If desired install the backplane into open 5 25 drive bays on your system 5 Use the 7 pin Serial ATA signal cables to connect the hard drive HD ports on the back of the backplane to your Serial ATA controller 6 To power the backplane use either Serial ATA or LP4 connectors from your power supply If you use LP4 connectors the power will automatically be converted to Serial ATA power Using Your Backplane Reset The Reset button LED on the front of the backplane serves as both a reset switch and an overheating LED When overheating occurs a buzzer will sound and the
4. with your product visit www startech com support and access our comprehensive selection of online tools documentation and downloads Warranty Information This product is backed by a one year warranty In addition StarTech com warrants its products against defects in materials and workmanship for the periods noted following the initial date of purchase During this period the products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not warrant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or their officers directors employees or agents for any damages whether direct or indirect special punitive incidental consequential or otherwise loss of profits loss of business or any pecuniary loss arising out of or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limitations or exclusions contained in this statement may not apply to you Revised March 1 2004
Download Pdf Manuals
Related Search