APC Ergonomic Notebook Stand with 4-Port USB 2.0 Hub
Contents
1. www apc com Display Height Adjustment Press silver Actuator Button on unit s base Release button for Cooling Cradle to lock into ferxey position Grasp Cooling Cradle amp notebook in lower corner Slide Cooling Cradle up or down until click is heard Carefully review Display Height Adjustment steps 1 5 located to the right before using the ENS DO NOT REMOVE HAND FROM COOLING CRADLE UNTIL YOU HEAR THE CLICK INDICATING IT HAS LOCKED INTO POSITION Front Drive Access Proper Display Height Adjust display height so screen is 18 30 from your eyes and display is at or slightly below eye level Ergonomic Notebook Stands ENS ENS USB User s Manual Thank you for purchasing an APC Ergonomic Notebook Stand Please fill out the warranty registration online at http www apc com support inter_warranty FEATURES amp HOW THEY FUNCTION Display Height Adjustment Actuator Button Pressing the Actuator Button allows you to adjust the position of the Cooling Cradle and thereby your notebook s display height to any one of four preset positions To change positions perform the following steps 1 Clasp the corner of your notebook and the bottom of the Cooling Cradle so your notebook and the Cooling Cradle are firmly grasped between your thumb and fingers 2 Press down on the Actuator Button located on unit s base with your other hand 3 Push the Cooling2. Cradle forwards or backwards approximately 1 2 inch and release pressure on the Actuator Button When you hear a click the Cooling Cradle has firmly locked into one of the four preset positions 4 Release your clasp on the Cooling Cradle and your notebook once you are certain the Cooling Cradle has locked into position 5 Repeat steps 1 4 to raise or lower system to next preset position Front Drive Access Folding Retainer The Folding Retainer located on the bottom of the Cooling Cradle allows you to gain quick access to drives bays or buttons located on your notebook s front edge Lower the Cooling Cradle to its lowest position Push the slide switch on front of Cooling Cradle towards the right and gently pull the retainer towards you When finished push the retainer back to its original position to lock it into place Do not push on the retainer to adjust height of the Cooling Cradle 360 Degree Rotation Non skid rollers on the bottom of your unit allow it to rotate 360 to share your notebook s display or access rear connections A Cooling Cradle Your notebook sits on top on the Cooling Cradle and is held securely in place with a series of non skid surfaces It has been designed to increase airflow of cool ambient air around your notebook This accelerates notebook cooling which can aid in increasing your notebook s performance battery life and even longevity Integrated 4 Port USB 2 0 Hub ENS USB mode
3. hird parties or otherwise This warranty gives you specific legal rights and you may also have other rights which may vary from location to location APC is a registered trademark of American Power Conversion All other trademarks are the property of their respective owners 990 1814 Rev 2 Copyright 2005 American Power Conversion All rights reserved Patents Pending
4. ls only A 4 port USB 2 0 Hub is integrated into your ENS USB All ports are located at the rear side of the unit s base Use these ports to access the unit s docking capabilities These high speed ports support USB powered peripherals such as external keyboards mice printers scanners hard drives optical drives etc PLACEMENT OF YOUR ERGONOMIC NOTEBOOK STAND ENS Proper configuration of your workstation may help relieve back shoulder and neck strain that often accompany long hours of working on a notebook computer For a complete set of instructions on how to properly set up your workstation see the US government s CDC website http Awww cdc gov od ohs Ergonomics compergo htm LCD Screen Adjust height so the top of your notebook s display is at or just below eye level when you are properly seated in an upright position Move the ENS so that your notebook s LCD screen is approximately 18 30 inches from your eyes Keyboard and Mouse An external keyboard and mouse are recommended when using the ENS Adjust keyboard height so your forearms are parallel to the floor approx 90 degree angle at elbow Adjust the slope of your keyboard so that the backs of your wrists are flat in a neutral position and not bent back while typing Your mouse should be at the same height CONNECTING YOUR USB 2 0 HUB ENS USB model only 1 Supply AC Power Plug AC power adapter included into wall socket Plug other end into square black connec
5. of purchase Its obligation under this warranty is limited to repairing or replacing at its sole option any such defective products To obtain service under warranty you must obtain a Return Material Authorization RMA number from APC or an APC service center Products must be returned to APC or an APC service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase This warranty does not apply to equipment which has been damaged by accident negligence or misapplication or has been altered or modified in any way This warranty applies to the original purchaser who must have proper registered the product within 10 days of purchase EXCEPT AS PROVIDED HEREIN AMERICAN POWER CONVERSION MAKES NO WARRANTIES EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE Some countries do not permit limitation or exclusion of implied warranties therefore the aforesaid limitation s or exclusion s may not apply to the purchaser EXCEPT AS PROVIDED ABOVE IN NO EVENT SHALL APC BE LIABLE FOR DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Specifically APC is not liable for any costs such as lost profits or revenue loss of equipment loss of use of equipment loss of software loss of data costs of substitutes claims by t
6. tor on rear of unit This step MUST be done first or the hub may not function 2 Connect the USB 2 0 Cable Insert rectangular end of the 2 ft USB 2 0 cable included into your computer s USB port Connect the square end to the white HOST port on the rear of the unit 3 Connect USB devices Use any of the four USB 2 0 ports located to the right and left of the power and notebook connection ports SPECIFICATIONS APC Model Number ENS SSS 2 5 Ibs 1 1 kg 3 1 Ibs 1 4 kg L x W x H low H high 300mm x 280mm x 121mm 217mm 300mm x 280mm x 121mm 217mm 1 year CE FCC Class B SB Hub Environmental n a Humidity 0 80 RH Noncondensing Operating Conditions Operating Temp 5 C 40 C Storage Temp 20 C 60 C USB Hub Connections n a 4 fully powered USB 2 0 ports Hi Speed USB 2 0 Type B uplink port for connection to notebook 5V power input connector USB Connection Types n 2 ft Hi Speed USB 2 0 cable USB Type A connection at notebook USB Type B connection at USB 2 0 hub USB 1 1 peripherals at 1 5Mbps max Compatibility peripherals MAC OS 9 0 or higher Specifications are subject to change without notice a a a a CONTACT INFORMATION Technical Support http www apc com support Internet http Awww apc com North America 1 800 800 4APC LIMITED WARRANTY American Power Conversion APC warrants its products to be free from defects in materials and workmanship for a period of one year from the date
Download Pdf Manuals
Related Search