APC Rack Air Removal Unit SX Ducting Kit
Contents
1. Arc www apc com Duct Kit for Rack Air Removal Unit Installation ACF126 ACF127 Inventory Support for the air manifolds Plastic air manifolds Hoses 1 4 2 A AD K gt QY lt gt O fF g Ceiling adapter 1 Holder flanges M4 Phillips machine screws Flange nuts ACF126 24 in 2 13 6 ACF127 600 mm Tools required e020 Z Lo OVe 2 Phillips screwdriver Utility knife Wire cutters Tape measure Hex nutdriver Installation Using wire cutters and a utility knife cut the Thread a holder flange counterclockwise onto one end hoses to fit your configuration The length of the of each hose and tighten by hand until it is firmly hose should equal the distance from the top of secured Do not overtighten the plastic manifold to the ceiling plus 6 in 15 24 cm CI na1722 M na0396b Duct Kit for Rack Air Removal Unit Installation ACF 126 ACF 127 Install the support for the air manifolds on the Assemble each plastic air manifold Fit 2 pieces frame of the Rack Air Removal Unit ARU together and secure them using two M4 machines using 3 M4 machine screws screws and flange nuts Then secure the two manifolds together na1816a Attach the end of the each hose without a holder flange to the ceiling adapter Loosen the clamps on the ceiling adapter and insert the end of the hose Tighten the clamps to securely hold the hose in place Install the plastic air manifolds onto th2. e support for the air manifolds using 4 M4 machine screws na1808a na1815a 2 Air Duct Kit for the Rack Air Distribution Unit Duct Kit for Rack Air Removal Unit Installation ACF 126 ACF127 Remove the ceiling tile directly above the unit Secure the ceiling adapter to the building s structural and save it for step 10 Install the ceiling adapter support not the drop ceiling using 10 gauge in the opening minimum steel wire a lt na0397a When using 2x4 ft ceilings tiles insert a cross When using 2x4 ft ceiling tiles cut the tile removed in member not provided for additional support step 7 to size and install it to cover the opening na0395a Slide the holder flanges on the unattached ends of the hoses over the air manifold sleeve and turn them clockwise to lock them into place na1840a Air Duct Kit for the Rack Air Distribution Unit www apc com APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways e Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests Wwww apc com Corporate Headquarters Connect to localized APC Web sites for specific countries each of which provides customer support information Wwww apc com support Global support searching APC Knowledge Base and us
3. ing e support e Contact an APC Customer Support center by telephone or e mail Regional centers Direct InfraStruXure Customer Support Line 1 877 537 0607 toll free APC headquarters U S Canada 1 800 800 4272 toll free Latin America 1 401 789 5735 USA Europe Middle East Africa 353 91 702000 Ireland Japan 0 35434 2021 Australia New Zealand South Pacific area 61 2 9955 9366 Australia Local country specific centers go to www apc com support contact for contact information Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support Entire contents copyright 2005 American Power Conversion Corporation All rights reserved Reproduction in whole or in part without permission is prohibited APC and the APC logo are trademarks of American Power Conversion Corporation All other trademarks product names and corporate names are the property of their respective owners and are used for informational purposes only a an WAA 11 2005 InfraStruXure by
Download Pdf Manuals
Related Search