Home

Philips 40HFL5010T/12 40" Full HD Smart TV Wi-Fi Black LED TV

1. What you need Interactive TV is only available on digital TV channels To enjoy the full benefits of Interactive TV you need a high speed broadband Internet connection to the TV HbbTV If a TV channel offers HobTV pages you must first switch on HbbTV in the TV settings to view the pages 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings and select General settings gt HbbTV and press OK 3 Select On and press OK 4 Press repeatedly if necessary to close the menu If you want to avoid access to HbbTV pages on a specific channel you can block the HbbTV pages for this channel only 1 Tune to the channel of which you want to block the HbbTV pages 2 Press OPTIONS and select HBB TV on this channel and press OK 3 Select Off and press OK Use iTV Open iTV pages Most channels that offer HbbTV or iTV invite you to press the key or OK key to open their interactive programme Navigate iTV pages You can use the arrow and colour keys the number keys and the 5 key to navigate the iTV pages You can use the p Play and i Pause keys to watch videos within iTV pages Digital Text UK only To open Digital Text press TEXT To close press Close iTV pages Most iTV pages inform you which key to use to close To force an iTV page to close switch to the next TV chan
2. HDMI ARC All of the HDMI connections on the TV have HDMI ARC Audio Return Channel If the device typically a Home Theatre System HTS also has the HDMI ARC connection connect it to any of the HDMI connections on this TV With the HDMI ARC connection you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS The HDMI ARC connection combines both signals You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device connection at a time In case you prefer to switch off ARC on the HDMI connections enter the Professional Home Menu Select TV settings gt Sound gt Advanced gt HDMI ARC Y Pb Pr Audio L R Y Pb Pr Component Video is a high quality connection The YPbPr connection can be used for High Definition HD TV signals Next to the Y Pb and Pr signals add the Audio Left and Right signals for sound Y shares the same jack with CVBS Component and Composite share audio jacks Only for TVs with component connectors CVBS Audio LR CVBS Composite Video is a high quality connection The CVBS connection can be used for High Definition HD TV signals Next to the CVBS signal adds the Audio Left and Right signals for sound Y shares the same jack with CVBS Component and Composite share audio jacks Only for TVs with component composite connectors Scart SCART is a good quality connection
3. Navigate to the right to view programmes scheduled later that day To switch to the programme channel select the programme and press OK View programme details To call up the details of the selected programme press INFO 41 Change day The TV guide can show scheduled programmes for the upcoming days maximum up to 8 days If the TV guide information comes from the broadcaster you can pres CH to view the schedule of one of the next days Press CH to go back to the previous day Alternatively you can press OPTIONS and select Change day Select Previous day Today or Next day and press OK to select the day of the schedule Set a reminder You can set reminders that alert you of the start of a programme with a message on screen To set a reminder select the programme in the schedule and press e for Set reminder The programme is marked with a clock To cancel the reminder press the e for reminder To view a list of all reminders you have set press OPTIONS and select All reminders Clear Search by genre If the information is available you can look up scheduled programmes by genre like movies sports etc To search for programmes by genre press OPTIONS and select Search by genre Select a genre and press OK A list with the found programmes appears 10 Sources 10 1 Sources list In the list of connections the Source menu you can find the devices connected to the
4. Source http www kerneLorg SQLite 3 7 2 SQLite is a in process library that implements a self contained serverless zero configuration transactional SQL database engine This piece of software is made available under the 64 terms and conditions of the SQLite license which can be found below Source http www sqalite org download html SquashFS 3 4 SquashFS is a compressed read only file system for Linux SquashFS compresses files inodes and directories and supports block sizes up to 1 MB for greater compression SquashFS is also the name of free open software licensed under the GPL for accessing SquashFS filesystems This piece of software is made available under the terms and conditions of the SquashFS license which can be found below Source http squashfs source i orge net glibc 2 6 1 Any Unix like operating system needs a C library the library which defines the system calls and other basic facilities such as open malloc printf exit The GNU C library is used as the C library in the GNU system and most systems with the Linux kernel This piece of software is made available under the terms and conditions of the glibc license which can be found below Source http www gnu org software libc mtd utils 1 The aim of the system is to make it simple to provide a driver for new hardware by providing a generic interface between the hardware drivers and the upper layers of the system
5. Open Smart TV The Smart TV start page is your link to the Internet You can rent movies online read newspapers watch videos and listen to music also shop online open your social network page Twitter or watch TV programmes when it suits you with Online TV To do this you open Apps Internet sites which are tailored for TV With your TV connected to the Internet you can open Smart TV Open Smart TV To open the Smart TV start page press SMART TV Alternatively you can press select Smart TV and press OK The TV connects to the Internet and opens the Smart 57 TV start page This may take a few seconds Close Smart TV To close the Smart TV start page press and select another activity TP Vision Europe B V bears no responsibility regarding the content and the quality of the content provided by the content service providers Smart TV start page 1 Now on your TV 2 Country Flags 3 Recommended Apps Country Flags Apps are organized by Country Select the desired country flag to see the overview of available apps for that profile Recommended Apps In this window Philips presents a range of recommended Apps for your country Apps for Online TV or a selection of rental movies from Video stores You can select and open them from the Recommended Apps window Open an App The list of your Apps on the Smart TV start page can be several pages long Use the arrow keys to go to the next or prev
6. Professional Settings Overview To view the Professional settings Room ID Set a room ID for the TV Restricted to numeric characters only with a maximum of four characters Channel setup Here you can enter the channel setup menu to rename reorder mark as favourites hide unhide channels Reset Professional Settings To reset Professional mode settings to factory default values Switch on settings Customise the way the TV behaves when it is switched on Switch on channel Switches to a predefined channel Switch on vol Switches to a predefined volume Max volume Limits the maximum volume of the TV Switch On Feature Starts up in Smart TV orMyChoice modes Switch on picture format Switches to a predefined picture format Power Settings Customise the way the TV behaves when it is switched on Power On Determine whether the TV goes to standby when it is switched on Low Power Standby Determine whether standby mode is Fast regular or Green low energy Smart power Enable or disable energy saving mode Wake on LAN Switch on the TV via internet if the TV is in standby Welcome message Create and display a welcome message for your guests Display message Switch the welcome message On or Off Line 1 Enter the first line of welcome text Line 2 Enter the second line of welcome text Clear Clear the welcome message Message Time out Set how long t
7. 2 Colour keys Follow on screen instructions Blue key opens Help 3 Numberkeysand text keypad To select a TV channel directly or to enter text 4 SUBTITLE To switch subtitles on off or Automatic 5 Volume To adjust the volume level 6 dx Mute To mute the sound or to restore it 7 TEXT To open or close Text Teletext 3 2 IR sensor The TV can receive commands from a remote control that uses IR infrared to send commands If you use such a remote control always make sure you point the remote control at the infrared sensor on the front of the TV 33 Batteries 1 Slide the battery door in the direction shown by the arrow 2 Replace the old batteries with 2 type AAA LRO3 1 5V alkaline batteries Make sure the and the ends of the batteries line up correctly 3 Reposition the battery door and slide it back until it clicks P up ua el Remove the batteries if you are not using the remote control for a long time Safely dispose of your old batteries according to the end of use directions 3 4 Cleaning Your remote control is treated with a scratch resistant coating To clean the remote control use a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the remote control Switch on 4 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV If the red indicator light is off press t
8. Hardware drivers need to know nothing about the storage formats used such as FTL FFS2 etc but will only need to provide simple routines for read write and erase Presentation of the device s contents to the user in an appropriate form will be handled by the upper layers of the system This piece of software is made available under the terms and conditions of the mtd utils license which can be found below Source http www linux mtd infradead org index html libusb 1 0 6 This is the home of libusb a library that gives user level applications uniform access to USB devices across many different operating systems libusb is an open source project licensed under the GNU Lesser General Public License version 2 1 Many participants in the libusb community have helped and continue to help with ideas implementation support and improvements for libusb This piece of software is made available under the terms and conditions of the libusb license which can be found below Source http libusb wiki sourceforge net http www libusb org libusb compat 0 1 3 Library to enable user space application programs to communicate with USB devices This piece of software is made available under the terms and conditions of the libusb compat license which can be found below Source http libusb wiki sourceforge net LibusbCompato 1 NTFS 3G Read Write Driver 2010 5 22 NTFS 3G is an open source cross platform implementation
9. To view and listen to your voicemails select Voicemails and press OK For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype 54 Voicemail About Voicemail If someone calls you on Skype and you do not take the call he or she can leave a sooken message on your Skype voicemail If you call a contact and they can t take the call you can send a Skype voicemail to your contact To send a voicemail or to receive a voicemail you or your contact must set up Skype voicemail first You can set up Voicemail on your computer Go to www skype com When you made voicemail available for you on a computer set your voicemail preferences in the Skype menu gt Settings gt Voicemails Record a Voicemail When you call a contact and they can t take the call you can leave a voicemail To record a voicemail 1 Call a contact If your call was not answered Skype will propose to send a Voicemail 2 Select Yes and speak your message 3 To stop recording select End call and press OK Play a Voicemail A contact can send a voicemail message to you If a voicemail was sent to you a small icon will show on the Skype menu You can play a voicemail from the History page To play a voicemail 1 In the Skype menu select History and press OK 2 Select Voicemails and press OK 3 Select the voicemail you want to play and pr
10. and the TV a as H O j Next to the antenna connections add an HDMI cable to connect the Set top box to the TV Alternatively you can use a SCART cable if the Set top box has no HDMI connection aa x Um F Switch off timer Switch off this automatic timer if you only use the remote control of the Set top box Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the Switch off timer Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu Select TV settings General settings Switch off timer and set the slider bar to Off 2 5 Home Theatre System HTS Connect HTS Use 2 antenna cables to connect the antenna to the Set top box a digital receiver and the TV s LiL Next to the antenna connections add an HDMI cable to connect the Set top box to the TV Alternatively you can use a SCART cable if the Set top box has no HDMI connection 0 L JL Digital Receiver Les fF Switch off timer Switch off this automatic timer if you only use the remote control of the Set top box Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV To switch off the Switch off timer Professional Mode Off Press and s
11. like start tags An introductory article on using This piece of software is made available under the terms and conditions of the Expat license which can be found below Source http expat sourceforge net DirectFB include SAWMAN 1 4 0 It is a software library for GNU Linux UNIX based operating system with a small memory footprint that provides graphics acceleration input device handling and abstraction layer and integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications This piece of software is made available under the terms and conditions of the DirectFB license which can be found below Source http sourceforge net projects jointspace fil es remote applications SDK remote spplications S DK v1 3 1 DirectFB141 source 1 3 1 7z download SAWMAN SquashFS is a compressed read only file system for Linux SquashFS compresses files inodes and directories and supports block sizes up to 1 MB for greater compression SquashFS is also the name of free open software licensed under the GPL for accessing SquashFS filesystems Source http squashfs sourceforge net Linux Kernel 3 0 The Linux kernel is an operating system kernel used by the Linux family of Unix like operating systems This piece of software is made available under the terms and conditions of the Linux Kernel license which can be found below
12. the warranty Pixel characteristics This LCD LED product has a high number of colour pixels Although it has effective pixels of 99 99996 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural 74 property of the display within common industry standards and is not a malfunction CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC and 2011 65 EU ROHS Compliance with EMF TP Vision Europe B V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects TP Vision confirms that as long as its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for ea
13. 2 5 for more colours and better graphics Text setup Text language Some digital TV broadcasters have several Text languages available To set your primary and secondary Text language 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings gt Language 3 Select Primary Teletext or Secondary Teletext 4 Select your preferred Text languages 5 Press 5 repeatedly if necessary to close the menu Text 2 5 If available Text 2 5 offers more colours and better graphics Text 2 5 is activated as a standard factory setting To switch off Text 2 5 1 Press TEXT 2 While watching the teletext press OPTIONS 3 Select Text 2 5 Off 25 4 Press 5 repeatedly if necessary to close the menu Menu language To change the language or the TV menus and messages 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt language and press OK 3 Select the language you want and press OK 4 Press 5 repeatedly if necessary to close the menu Menu Audio languages If the TV channel broadcasts multiple or dual audio languages you can select your preferred audio language 1 While you watch TV press OPTIONS 2 For digital channels select Audio language For anal
14. 44 12 1 Network 44 12 2 Wireless network 44 12 3 Wired network 45 12 4 Network settings 45 13 Your photos videos and music 47 13 1 From a USB connection or computer 47 13 2 Wi Fi Miracast 48 14 Skype 50 14 1 About Skype 50 14 2 What you need 50 14 3 Start with Skype 50 14 4 Skype menu 51 14 5 My profile 51 14 6 People 52 147 Calling on Skype 53 14 8 Skype credit 54 14 9 Skype settings 55 14 10 Sign out 56 14 11 Quit Skype 56 14 12 Terms of use amp Privacy Policy 56 15 Smart TV 57 15 1 About Smart TV 57 15 2 What you need 57 15 3 Smart TV Apps 57 15 4 Reset Smart TV 58 16 Specifications 59 16 1 Environmental 59 16 2 Reception 59 16 3 Display 60 16 4 Power 60 16 5 Dimensions and weights 60 16 6 Wall mounting 61 16 7 Connectivity 61 16 8 Multimedia 61 17 Software 62 17 1 Software update 62 17 2 Software version 62 17 3 Open source software 62 17 4 Open source license 63 18 Troubleshooting and support 69 18 1 Troubleshooting 69 18 2 Register 70 18 3 Online help 70 18 4 Consumer Care Repair 70 19 Safety and care 72 19 1 Safety 72 19 2 Screen care 73 a Terms of use copyrights and licenses 20 1 Terms of use 74 20 2 Copyrights and licenses 74 Index 77 1 Setting up 11 Read safety Read the safety instructions that are supplied with the TV first before you use the TV 12 TV stand and wall mounting TV stand You can find the instructions for mount
15. 44 ew channels 28 oise reduction 36 ZZ ZA eee oe ZZZ O On and Off 16 Online support 70 Online TV 58 Open source software 62 Options on a channel 24 Original language 26 P Parental rating 23 Photo camera connect 11 Photos slideshow 47 Photos videos and music 47 Picture style 34 Picture backlight contrast 34 Picture colour 34 Picture problems 69 Picture sharpness 34 Pixel Plus link 7 Playback formats 61 Power connection 3 Power consumption check 59 Predefined symbol rates 30 Q Quick picture settings 33 R Radio channel 22 Reception quality 30 Recording Skype calls 54 Red button 26 Rename channels 23 Rental videos 58 Repair 70 S Safety instructions 72 SCART connection tips 6 Screen care 73 Screen off 47 Screen off 59 Sharpness 34 Sharpness MPEG artefact reduction 36 Sharpness Noise reduction 36 Sharpness super resolution 36 Shop location 37 Skype auto sign in 55 Skype camera zoom pan and tilt 56 Skype contacts 52 Skype during recording 54 Skype install camera 50 ype menu 51 ype Microsoft account 51 ype missed calls 54 ype new account 50 ype receiving a call 54 ype rental movies and Pause TV 54 ype sign in 50 ype video call 53 ype what you need 50 ype what 50 Sleep timer 43 Smart TV about 57 Smart TV internet 57 Smart TV open 57 Smart TV overview 57 Smart TV start page 57 Sound style 37 Sound p
16. Home Menu 2 Select TV settings gt Picture gt Advanced gt Colour gt Colour enhancement 3 Press p right and select Maximum Medium Minimum or Off 4 Press repeatedly if necessary to close the menu Colour temperature With Colour temperature you can set the picture to a preset colour temperature or select Custom to set a temperature setting yourself with Custom colour temperature Colour temperature and Custom colour temperature are settings intended for expert users To select a preset 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Picture Advanced Colour gt Colour temperature 3 Press p right and select Normal Warm or Cool Select Custom if you want to set a colour temperature yourself 4 Press repeatedly if necessary to close the menu Custom colour temperature With Custom colour temperature you can set a colour temperature yourself To set a Custom colour temperature first select Custom in the Colour temperature setting to make the Custom colour temperature menu available Custom colour temperature is a setting intended for expert users To set a custom colour temperature 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced
17. Miracast switched on CERTIFIED S 4 Y For more information on Wi Fi Certified Miracast go to www wi fi org Wi Fi the Wi Fi CERTIFIED logo the Wi Fi logo are registered trademarks of the Wi Fi Alliance Wi Fi CERTIFIED Miracast Miracast are trademarks of the Wi Fi Alliance Switch on Miracast The TV comes with Miracast switched On and is ready to show the screen of a device with Miracast Switch off Miracast If you do not want the TV to receive requests for screen sharing from other devices you can switch off Miracast on the TV 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Network settings gt Wi Fi Miracast gt Offandpress OK 3 Press 3 repeatedly if necessary to close the menu 4 When Professional Mode On a Miracast Icon will be added in the Home Menu Share a screen on TV To share the screen of your smartphone tablet or computer on the TV 1 Switch on the TV 2 Professional Mode On Press to open the Home menu select Miracast and press OK 3 On the device open an application such as Wi Fi Miracast Wi Fi Direct Intel Wireless Display or similar and start scanning for other Miracast devices 4 In the list of found devices select the TV and connect 5 Onthe TV agree to the request to connect to the TV You might be asked to enter a PIN code from t
18. Select Blocked contacts and press OK To manage your blocked contacts press OPTIONS Voicemail You can set some preferences for sending voicemails If you allow a contact to send you a voicemail when you can t take the call check the box of Send unanswered calls to voicemail Leave the box unchecked if you do not want to receive voicemails If you allow a contact to send you a voicemail when you can t answer the call within 15 seconds and you are in another call check the box of I am already in a call If you allow a voicemail when you declined a call check the box of decline an incoming call To set your preferences for voicemail 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Select Voicemail and press OK 4 Press w down or A up to select a check box Press OK to check or uncheck Call forwarding Never miss a Skype call with Call Forwarding If you are not online or can t take the call you can forward a Skype call to any phone or mobile phone You can also forward a Skype call to another Skype account You can set up to three phone numbers or Skype Names in order of preference to forward calls to You need Skype Credit or a Skype subscription to forward calls to phones Forwarding Skype calls to other Skype accounts is free of charge For more information on call forwarding go to www skype com support To set up call forwarding 1 Sign in to
19. Select Video call and press OK If your contact is on Skype has a Skype camera connected and answers the call you can see this person on TV 3 To end the call select e End call and press OK When your Skype camera is switched on a blue indicator LED lights up You can check what your contact can see in the small screen on the bottom right of the TV screen To switch the Skype camera off select gi Video Off and press OK To switch it back on select Video On and press OK To mute your microphone select f Mic Off and press OK To switch it back on select amp Mic On and press OK While you are making a video call you can change the viewpoint of the camera Make a Voice call Make a Voice call to call without video with the camera switched off To make a Voice call 1 On the Contacts page select the contact you want to call 2 Select Call and press OK If your contact is on Skype and answers the call you can talk to your contact 3 To end the call select e End call and press OK A contact can add you to a voice call with more than one participant You cannot add an extra participant yourself Calling phones With Skype you can also call landline phones and mobile phones To call phones you need to buy Skype Credit or a Skype subscription To call a phone 1 On the Contacts page select a phone number contact 2 Select Call and press OK You must have Skype Credits available or have a
20. Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Press OK to check the check box for Forward calls when am not on Skype 4 n the entry fields below enter the phone numbers or Skype Names from your contact list in order of preference to forward your calls to Always add the country code for phone numbers 5 Change if necessary the amount of seconds before Skype forwards your call 6 Select Save to store your Call Forwarding setup Camera zoom pan and tilt You can set the viewpoint of your camera You can zoom in or out pan or tilt the camera frame While you are in a Video call you can set the camera viewpoint To set the camera viewpoint 1 Start a Video call and wait until the call is ongoing 2 Press p right to select the icon above the small screen and press OK A bar with colour key functions appears 3 To shift pan the camera frame press left or gt right To tilt the camera frame press A up or w down To zoom in press e Zoom in To zoom out press Zoom out 4 Press e Done to store the camera viewpoint and to go back to your Skype call 56 14 10 Sign out When you sign out of Skype you are signing out your Skype account Your Online status will change to Offline Your contacts will not be able to call you To sign out 1 Press Back from anywhere within Skype to return to the Skype menu 2 Select Sign out in the Skype menu a
21. Smart TV clear the Internet memory on the TV You will clear your Philips Smart TV registration and parental rating setting your video store app logins all Smart TV app favourites Internet bookmarks and history To clear the Internet memory 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Network settings Clear Internet memory and press OK 16 Specifications 16 1 Environmental Saving energy The Eco settings bundle the settings that help the environment While you are watching TV channels press adjust and select Eco settings to open Eco settings Active settings are marked with a wg You can mark or unmark each setting with the OK key Press e again to close Eco settings Energy saving This Picture style sets the picture in the most ideal energy conscious setting Screen off If you only listen to music you can switch off the TV screen to save energy Select Screen off and press OK To switch the screen back on press any key on the remote control Light sensor To save energy the built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens The built in light sensor automatically adjusts the picture to the lighting conditions of the room Switch off timer If you do not press a key on the remote control during a 4 hour period or if the TV receives no si
22. TV witha composite cable CVBS and an audio L R cable to the TV ooo ooo Y shares the same jack with CVBS Component and Composite share audio jacks 29 USB flash drive You can view photos or play your music and videos from a connected USB flash drive Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on 7 iind a y 2 3 The TV detects the flash drive and opens a list showing its content If the contents list does not appear automatically press SOURCE select USB and press OK To stop watching the USB flash drive content press TV or select another activity To disconnect the USB flash drive you can pull out the flash drive anytime 2 10 Photo camera To view photos stored on your digital photo camera you can connect the camera directly to the TV Use one of the USB connections on the TV to connect Switch on the camera after you made the connection If the contents list does not appear automatically press SOURCE select USB and press OK Your camera might need to be set to transfer its content with PTP Picture Transfer Protocol Read the user manual of the digital photo camera Ultra HD on USB You can view photos in Ultra HD resolution from a connected USB device or flash drive The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher You cannot play a native Ultra HD video on any of the USB connecti
23. You can set the value in steps of 5ms Maximum setting is 6Oms The Audio Out delay setting should be switched on To synchronise the sound on the TV 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound Advanced Audio out offset 3 Use the slider bar to set the sound offset and press OK 4 Press repeatedly if necessary to close the menu Audio Out format If you have a Home Theatre System HTS with multichannel sound processing capabilities like Dolby Digital DTS or similar set the Audio out format to Multichannel With Multichannel the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System If you have a Home Theatre System without multichannel sound processing select Stereo To set the Audio out format 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound Advanced Audio out format 3 Select Multichannelor Stereo 4 Press repeatedly if necessary to close the menu Audio Out levelling Use the Audio Out levelling setting to level the volume loudness of the TV and the Home Theatre System when you switch over from one to another Volume differences can be caused by differences in sound processi
24. a TV Each RC is associated with one of four colour keys MyChoice Enable or disable access to premium channels MyChoice SystemUl Settings Source Smart UI allows hotels to display a HTML portal when users select Browse Portal from the Home menu Select Off to disable this feature and hide Browse Portal from the Home menu Selecting Server links to a URL and Local displays locally stored HTML pages The HTML files and supporting content images video etc stored in the TV should not exceed a total of 4 MB Fallback If SmartUl is on enabling the backup automatically launches locally stored HTML content if the link to an external server or URL does not work Icon Label Change the label of the Browse Portal icon Server URL Enter the URL to access from Browse Portal Web Services TVDiscovery Service Enable auto discovery by selecting On Disable it by selecting Off SI Service If SI Services is enabled by selecting On users view the server defined in Smart TV Settings when they select Browse Portal in the home menu If SI Services is disabled the locally stored HTML files defined in Smart TV Settings will launch when Browse Portal is selected 20 IP Upgrade Service Enable or disable IP upgrade Vsecure Vsecure prevents unauthorised viewing and copying of video use this setting to change modes load and erase keys Vsecure over RF enable To enable Vsecure feature for RF c
25. audio device connected with HDMI CEC you can use one of the EasyLink settings If you select EasyLink the TV sends the TV sound to the audio device The TV will switch off the TV speakers when the device is playing the sound If you select EasyLink autostart the TV will switch on the audio device send the TV sound to the device and switch off the TV speakers With EasyLink or EasyLink autostart selected you can still switch to TV speakers or device speakers in the Picture and sound menu To set the TV speakers 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Sound Advanced TV Speakers 3 Press p right and select Off TV speakers EasyLink or EasyLink autostart 4 Press repeatedly if necessary to close the menu To switch speakers directly 1 While watching TV press OPTIONS and select Picture and sound 2 Select Speakers and select TV or Amplifier audio device 3 Press 5 repeatedly if necessary to close the menu Clear sound With Clear sound you improve the sound for speech Ideal for news programmes You can switch the speech improvement on or off To switch on or off 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Sound Advanced Clear sound 3 P
26. bar and sorting With a USB device connected the TV sorts the files by type Navigate to the menu bar and select the type of file you are looking for If you browse files from a computer you can only browse the files and folders as they are organized on the computer The menu bar Navigate to the menu bar and select the type of file you want to watch or play Select Photos 77 Music or gp Videos Alternatively you can open the m Folders view and browse your folders to look for a file Sorting 47 To browse your photos by date month year or alphabetically by name press e Sort To browse your music by album artist genre or alphabetically by name press Sort Videos are sorted alphabetically View photos To view photos select gl Photos in the menu bar select a photo thumbnail and press OK If there are several photos in the same folder select a photo and press Slide show to start a slide show of all photos in this folder To jump to the next or previous photo press CH 4 or CH To stop the slide show or close the photo press n You can play music with a slide show Start the slide show after you started the music 1 Select a song or a folder with songs and press OK 2 Press CHANNEL GRID and select Photos 3 Select a photo or a folder with photos and press Slide show Info To view info on a photo size creation date file path etc select a photo and press I
27. can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV If reception on only one channel is poor fine tune this channel Poor picture from a device Make sure that the device is connected properly Make sure that the picture settings are set correctly Picture settings change after a while Make sure that Location is set to Home You can change and save settings in this mode A commercial banner appears Make sure that Location is set to Home Picture does not fit the screen Change to a different picture format Press FORMAT Picture format keeps changing with different channels Select a non Auto picture format Picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the connected device Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate Sound No sound or poor sound quality If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction Make sure that the sound settings are correctly set Make sure that all cables are properly connected Make sure that the volume is not muted or set to zero Make sure that the TV audio output is connected to the audio input on the Home Theatre System Sound should be
28. heard from the HTS speakers Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still do not hear audio try changing the digital audio format of the device to PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions Connections HDMI Note that HDCP High bandwiath Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device If the TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again If there are intermittent sound disruptions make sure that output settings from the HDMI device are correct If you use an HDMI to DVI adapter or HDMI to DVI cable make sure that an additional audio cable is connected to AUDIO IN mini jack only if available EasyLink does not work Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible No volume icon shown 70 When a HDMI CEC audio device is connected this behaviour is normal Photos videos and music from a USB device do not show Make sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation Make sure that the USB storage device is compatible with the TV Make sure that the audio and picture f
29. if necessary to close the menu To switch off the parental age rating select None as age setting The TV will ask for the code to unlock the programme For some broadcasters operators the TV only locks programmes with a higher rating Set or change the lock code To set the lock code or to change the current code 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings gt Child lock Change code and press OK 3 Ifa code is set already enter the current Child lock code and then enter the new code twice The new code is set Forgotten your code If you have forgotten your code to unlock call Consumer Care in your country Find the telephone number on the documentation that came with the TV or go to www philips com support Options for channels While watching a channel depending on the type of channel analogue or digital you are watching or depending on the TV settings you made some options are available Open the options menu While watching a channel press OPTIONS Universal access With Universal access switched on you can set some options for hearing impaired and visually impaired people Video selection Digital TV channels can offer multi video signals multi feed broadcast different camera viewpoints or angles of the same event or different programmes on one TV channel The TV sho
30. its affiliates in the United States and other countries Microsoft EE Microsoft Windows Media Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries Microsoft PlayReady Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protected content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade Wi Fi Alliance Wi Fi the Wi Fi CERTIFIED logo the Wi Fi logo are registered trademarks of the Wi Fi Alliance Wi Fi CERTIFIED Miracast Miracast are trademarks of the Wi Fi Alliance MHEG software The copyright in MHEG software the Software comprised in this television this product and included to enable you to use interactive television features is owned by S amp T CLIENT SYSTEMS LIMITED the Owner You are permitted to use the Software only in conjunction wit
31. lock programmes from connected devices To lock a channel 1 Professional Mode Off While watching a TV channel press CHANNEL GRID to open the channel list Professional Mode On In the Professional Home Menu select Professional Settings menu and press OK Select Professional settings Channel setup and press OK 2 In any list select the channel you want to lock 3 Press OPTIONS and select Lock channel In a 23 channel list a locked channel is marked with a lock 6 To unlock a channel select the locked channel in the channel list Press OPTIONS and select Unlock channel You will need to enter the Child lock code Parental rating To prevent children from watching a programme not suitable for their age you can use an age rating Some digital broadcasters have age rated their programmes When the age rating of a programme is equal to or higher than the age you have set as age rating for your child the programme will be locked To watch a locked programme you must enter the child lock code The parental age rating is set for all channels To set an age rating 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings gt Child lock Parental rating and press OK 3 Enter a 4 digit Child lock code and confirm Now you can set an age rating 4 Setthe age and press OK 5 Press 5 repeatedly
32. movies sent as a streaming video format You can almost instantly watch the movie You might need a USB Hard Drive to store some video buffer If you have a USB Hard Drive connected you can also download rental movies from video stores that offer movie downloading only You can pause or restart a downloaded rental movie Consult the video store regarding the rental duration of rental movies Internet traffic Streaming or downloading many videos may exceed your monthly Internet traffic limit Online TV With the Online TV App on the Smart TV start page you can watch TV programmes you missed or watch programmes whenever it suits you best Open Online TV To open the Online TV App 1 Press SMART TV 2 Onthe start page select the yg Online TV icon and press OK 3 Select a programme on the page and press OK to start watching You can use the p Play and i Pause keys List per broadcaster To view the Online TV programmes ordered by broadcaster press e All broadcasters Select a broadcaster and press OK 58 If available in your region World Wide Web The Internet App opens the World Wide Web on your TV On your TV you can view any Internet website but most of them are not tailored for a TV screen Some plug ins e g to view pages or videos are not available on your TV Internet pages are shown one page at a time and full screen 15 4 Reset Smart TV To reset your connection with
33. or change your email address check the amount of credit you have or view the subscription information or write a message that reflects your mood Profile picture If you did not upload a profile picture with your computer yet you can select one of the available avatars as Profile picture here Online status You can change your online status Select the status you want your contacts to see when you are online 14 6 People Your contacts In People you can find the list of your Skype contacts Your contacts are shown with their Skype Name Contacts are online and available for a Skype call when a green dot is shown next their name You can use the text box in the top left corner of the contact page to search for a contact within your contact list Or simply scroll down the list to find the contact you want 52 Add a contact Add a Skype contact In People the list of your contacts you can add a new Skype contact Add a Skype contact If you know the Skype Name or email of a friend Skype can easily find your contact If you do not know their Skype Name or email you can also try to look for them by name To add a Skype contact 1 On the Contacts page press OPTIONS 2 Select Add Skype Contact and press OK 3 Enter a Skype Name or email address of your new contact You can also try to enter a name To open the on screen keyboard press OK When you re done press OK 4 Skype will sear
34. www gnu org software gzip 66 inetutils 1 4 2 Inetutils is a collection of common network programs Source http www gnu org software inetutils iputils s20101006 The iputils package is set of small useful utilities for Linux networking It was originally maintained by Alexey Kuznetsov Source http www skbuff net iputils module init tools 3 12 Provides developer documentation for the utilities used by Linux systems to load and manage kernel modules commonly referred to as drivers Source https modules wiki kernel org index ohp M ain Page ncurses 5 7 The Ncurses new curses library is a free software emulation of curses in System V Release 4 0 and more It uses Terminfo format supports pads and color and multiple highlights and forms characters and function key mapping and has all the other SYSV curses enhancements over BSD Curses Source http www gnu org software ncurses net tools 1 6 The Net tools package is a collection of programs for controlling the network subsystem of the Linux kernel Source http www linuxfromscratch org blfs view 6 3 basicnet net tools html procps ps top 3 2 8 procps is the package that has a bunch of small useful utilities that give information about processes using the proc filesystem The package includes the programs ps top vmstat w kill free slabtop and skill Source http procps sourceforge net index html psmisc 22 13 Thi
35. 10 without TV stand Width 1081 8 mm Height 623 4 mm Depth 77 8 mm Weight 12 4 kg with TV stand Width 1081 8 mm Height 685 7 mm Depth 249 4 mm Weight 13 9 kg 55HFL5010 without TV stand Width 1239 2 mm Height 711 6 mm Depth 79 2 mm Weight 15 1 kg with TV stand Width 1239 2 mm Height 778 2 mm Depth 265 8 mm Weight 17 5 kg 16 6 Wall mounting 28HFL5xxO VESA MIS F 100x100 M4 32HFL5xxO VESA MIS F 100x100 M4 AOHFL5xxO VESA MIS F 200x200 M4 ABHFL5xxO VESA MIS F 200x200 M6 5bbHFL5xxO VESA MIS F 400x200 M6 Note Before mounting the TV on the wall remove the existing VESA screws on the back panel Warning Follow all instructions provided with the TV mount T Vision Europe B V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors leave a gap of at least 5 5 cm 2 2 inches from the back of the TV Before you mount the TV on the wall find the correct length of the screw To find the length of the screw add the thickness of your wall mount to the screw length y as shown in the graphic 16 7 Connectivity For 28HFL5010 32HFL5010 40HFL5010 48HFL5010 55HFL5010 TV Rear Audio In DVI VGA Stereo mini jack 3 5mm SCART Audio L R CVBS in RGB YPbPr Y Pb Pr Audio L R Stereo mini jack 3 5mm Digital Audio out Optical Toslink VGA 1x HD
36. 4 Select TV settings General settings Channel list copy gt Copy to TV and press OK You might be asked to enter the Child lock code of this TV 5 The TV notifies you if the channel list is copied to the TV successfully Unplug the USB memory device To an already installed TV 1 Verify the country setting of the TV To verify this setting press and select Setup and press OK Select Search for channels gt Re install channels and press OK Press 5 and later Cancel to leave the Search for channels If the country is correct continue with step 2 If the country is not correct you need to start a reinstallation To start the reinstallation press and select Setup and press OK Select TV settings gt General settings gt Reinstall TV gt OK Select the correct country and skip the Search for channels Finish the installation When done continue with step 2 2 Plug in the USB memory device that holds the channel list of the other TV 3 To start the channel list upload press and select Setup and press OK 4 Select TV settings General settings Channel list copy gt Copy to TV and press OK You might be asked to enter the Child lock code of this TV 5 The TV notifies you if the channel list is copied to the TV successfully Unplug the USB memory device DVB T or DVB C DVB T or DVB C reception If both DVB T and DVB C reception is available in your country and if this TV is ready to receive DVB T a
37. E string manipulation This piece of software is made available under the terms and conditions of the ICU license which can be found below Source http www icu project org 63 libpng 1 2 43 PNG decoder This piece of software is made available under the terms and conditions of the libpng license which can be found below Source http www libpng org pub png libpng html libjpg 6b This library is used to perform JPEG decoding tasks This piece of software is made available under the terms and conditions of the libjpg license which can be found below Source http www ijg org libmng 1 0 10 libmng THE reference library for reading displaying writing and examining Multiple Image Network Graphics MNG is the animation extension to the popular PNG image format This piece of software is made available under the terms and conditions of the libmng license which can be found below Source http sourceforge net projects libmng files u Boot loader 1 3 4 Used by boot loader and only linked with boot loader GPL license This piece of software is made available under the terms and conditions of the u Boot loader license which can be found below Source http sourceforge net projects u boot files u boot U Boot 1 1 4 u boot 1 1 4 tar bz2 download Libcurl 7 21 7 HTTP client libcurl is a free and easy to use client side URL transfer library supporting FTP FTPS HTTP HTTPS SCP S
38. FTP TFTP TELNET DICT LDAP LDAPS FILE IMAP SMTP POP3 and RTSP libcurl supports SSL certificates HTTP POST HTTP PUT FTP uploading HTTP form based upload proxies cookies user password authentication Basic Digest NTLM Negotiate Kerberos4 file transfer resume http proxy tunneling and more This piece of software is made available under the terms and conditions of the Libcurl license which can be found below Source http curl haxx se c ares 1 7 4 c ares is a C library that performs DNS requests and name resolves asynchronously This piece of software is made available under the terms and conditions of the c ares license which can be found below Source http c ares haxx se c ares 1 7 1 tar gz openssl 1 0 0d OpenSSL is an open source implementation of the SSL and TLS protocols The core library written in the C programming language implements the basic cryptographic functions and provides various utility functions Wrappers allowing the use of the OpenSSL library in a variety of computer languages are available This piece of software is made available under the terms and conditions of the 1 7 4 license which can be found below Source htto www openssl org source openssl 1 0 0 tar gz Expat 2 01 xml paser Expat is an XML parser library written in C It is a stream oriented parser in which an application registers handlers for things the parser might find in the XML document
39. For Symbol rate mode select Automatic unless your cable provider gave you a specific symbol rate value To enter the symbol rate value use the number keys Manual installation Analogue TV channels can be manually installed channel by channel To install analogue channels manually 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings Channel installation Analogue Manual installation and press OK System To set up the TV system select System and press OK Select your country or the part of the world where you are now Search channel To find a channel select Search channel and press OK Select Search and press OK You can also enter a frequency yourself If the reception is poor press Search again If you want to store the channel select Done and press OK Fine tune To fine tune a channel select Fine tune and press OK You can fine tune the channel with A or vw If you want to store the channel found select Done and press OK Store current channel Store as new channel You can store the channel on the current channel number or as a new channel number Select Store current channel or Store as new channel You can redo these steps until you have found all available analogue TV channels 31 7 Home menu From the Home menu you can start any activity you can do with the TV Open th
40. MI Bathroom speaker audio out DC out 12V SXP TV Side 1x HDMI Ix USB 2 0 Common interface slot Cl CAM Headphones Stereo mini jack 3 5mm 61 16 8 Multimedia Connections USB 20 Ethernet LAN RJ 45 Wi Fi 802 11b g n built in Supported USB file systems FAT 16 FAT 32 NTFS Playback formats Containers 3GP AVCHD AVI MPEG PS MPEG TS MPEG 4 Matroska MKV Quicktime MOV MAV M4A Windows Media ASF WMV WMA Video Codecs MPEG 1 MPEG 2 MPEG 4 Part 2 MPEG 4 Part 10 AVC H264 VC 1 WMV9 Audio Codecs AAC HE AAC v1 v2 AMR NB Dolby Digital Dolby Digital Plus DTS 2 0 Digital Out MPEG 1 2 2 5 Layer I6 I III includes MP3 WMA v2 to v9 2 WMA Pro v9 v10 Subtitles Formats SAMI SubRip SRT SubViewer SUB MicroDVD TXT mplayer2 TXT TMPlayer TXT Character encodings UTF 8 Central Europe and Eastern Europe Windows 1250 Cyrillic Windows 1251 Greek Windows 1253 Turkish Windows 1254 Western Europe Windows 1252 Image Codecs JPEG Limitations Maximum supported total bit rate for a media file is 30Mbps Maximum supported video bit rate for a media file is 20Mbps MPEG 4 AVC H 264 is supported up to High Profile L4 1 VC 1is supported up to Advanced Profile L3 Wi Fi Certified Miracast This TV supports WiDi 4 x devices Supported media server software DM
41. NFO Press again to hide the info Options Press OPTIONS Shuffle Shows your photos in a random order Repeat Plays the slide show continuously Slide show speed Sets the speed of the slide show Slide show transition Sets the style of the photo transitions To close Browse USB press and select another activity Play music To play music select ss Music in the menu bar select a song and press OK If there are more songs in the same folder press e Play all to play all songs in this folder To jump to the next or previous song press CH or CH To pause the music press OK Press OK again to continue To make a 10 second jump in a song or 10 second jump back press p or 4 To rewind or fast forward press or Press the keys several times to speed up 2x 4x 8x 16x 32x To stop the music playback press m Stop If you press the music keeps on playing Info To view song info title artist duration etc select the song and press INFO Press again to hide the info Options Press OPTIONS Shuffle Plays your music randomly Repeat Plays the song once or continuously Screen off If you only listen to music you can switch off the TV screen to save energy To switch off the screen press OPTIONS select g Eco settings in the menu bar select Screen off and press OK To switch the screen back on press any key on the remote control To close Browse U
42. OK Professional Mode On Enter the Professional Home Menu 4 Select Connect to network and press OK 5 Select Wired and press OK The TV constantly searches for the network connection A message will be shown when the connection is successful Network configuration If the connection fails you can check the DHCP setting of the router DHCP should be set to On Alternatively if you are an advanced user and want to install your network with static IP addressing set the TV to Static IP To set the TV to Static IP Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu Select Network settings Network settings gt Network configuration gt Static IP With Static IP selected in the menu you can set the IP address and other necessary settings in Static IP configuration in the same menu To fulfill EMC regulations use a shielded FTP Cat 5E Ethernet cable 12 4 Network settings To open the Network settings 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Network settings and press OK View network settings All current network settings are shown here The IP and MAC address signal strength speed encryption method etc Network settings Network type Sets the network to Wired or Wireless Network configuration Sets the n
43. S PC Microsoft Windows XP Vista or Windows 7 You can use any DLNA certified media server software Microsoft Windows Media Player Mac OS X You can use any DLNA certified media server software Mobile devices Philips MyRemote iOS Android Interoperability and performance may vary depending on the capabilities of the mobile device and the software used ESD regulations This apparatus meets performance criteria B for ESD In case the apparatus does not recover in file sharing mode due to electrostatic discharge user interference is required Only for Smart TVs 17 Software 17 1 Software update Update from USB It might be necessary to update the TV software You need a computer with an high speed Internet connection and a USB memory device to upload the software on the TV Use a USB memory device with 256MB free space Make sure that write protection is switched off 1 To Start the update on TV Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Identify the TV Insert the USB memory into one of the USB connections of the TV Select Start and press OK An identification file is written on the USB memory device 3 Download the TV software Insert the USB memory into your computer On the USB memory device locate the file update htm and double click it Click on Send ID I
44. SB press and select another activity Play videos To play a video select ggg Videos in the menu bar select a video and press OK If there are more videos in the same folder press Play all to play all videos in this folder To jump to the next or previous video press CH or CH To pause the video press OK Press OK again to continue To make a 10 second jump forward or backward in a video press por lt To rewind or go fast forward press or Press the keys several times to speed up 2x 4x 8x 16x 32x To stop the video playback press y Info To view info on a video playhead position duration title date etc select the video and press INFO Press again to hide the info Options Press OPTIONS Subtitles If available you can switch subtitles On Off or On during mute Shuffle Plays your videos in a random order Repeat Plays a video once or continuously 48 To close Browse USB press and select another activity 132 Wi Fi Miracast About Wi Fi Miracast Your TV is a Wi Fi Certified Miracast device With Miracast you can watch and share the screen of your smartphone tablet or computer on your TV screen wirelessly You can stream videos audio and video share photos or anything else that s on screen of the device No need to connect the device to your home network Both the TV and the device must be Wi Fi Certified Miracast devices and have
45. Skype subscription to make a call with a phone number If your contact answers the phone you can talk to your contact 3 To end the call select es End call and press OK With Skype you can also call a phone number directly You can enter the phone number with the dial pad To open the dial pad 1 In the Skype menu select Call phones and press OK 2 Ifthe dial pad is not on screen select Dial Pad and press OK 3 Dial the phone number You can navigate to the numbers and press OK or use the number keys on the remote control Show No emergency calls Skype is not a replacement for your telephone and cannot be used for emergency calling Receiving a call When you are signed in to Skype and watching TV a ringtone and a message on screen will alert you of an incoming call The message will show who is calling and you can answer or decline the call To answer the call select Answer with video and press OK To answer the call with the camera switched off select Answer with audio and press OK To decline the call select Decline call and press OK History In the History page of the Skype menu you will finda list of all calls you made including the calls you missed You can also see new contact requests and listen to voicemails To view a list select All calls Missed calls Incoming calls or Outgoing calls and press OK To view new contact requests select Contact requests and press OK
46. Source http e2fsprogs sourceforge net alsa 1 0 24 1 Advanced Linux Sound Architecture ALSA This piece of software is made available under the terms and conditions of the alsa license which can be found below Source http www alsa project org lvm2 2 02 89 DM VERITY This piece of software is made available under the terms and conditions of the lvm2 license which can be found below Source ftp sources redhat com pub lvm2 releases encfs 1 3 2 A library provides an encrypted filesystem in user space Source http www argO net encfs boost 1 15 0 A library provides free peer reviewed portable C source libraries is used for encfs Source http www boost org rlog 1 4 A library that provides a flexible message logging facility for C programs and libraries is used for encfs Source http www argO net rlog iptables 1 4 15 For Cross connection Source http www netfilter org projects iptables bash 3 2 48 Bash is the shell or command language interpreter that will appear in the GNU operating system Bash is an sh compatible shell that incorporates useful features from the Korn shell ksh and C shell csh It is intended to conform to the IEEE POSIX P1003 2 ISO 9945 2 Shell and Tools standard It offers functional improvements over sh for both programming and interactive use In addition most sh scripts can be run by Bash without modification Source http www gnu o
47. Step 4 Select Connect to network and press OK Connect and press OK Step 5 Select Wireless and press OK Step 6 Select Scan to scan for your wireless network If you have a router with WPS Wi Fi Protected Setup you can select WPS Select your choice and press OK Scan Select Scan to scan for your wireless network your wireless router The TV might find several wireless networks in your proximity WPS If your router has WPS you can directly connect to the router without scanning Go to the router press the WPS button and return to the TV within 2 minutes Then press Connect to make the connection If you have devices in your wireless network that use the WEP security encryption system you cannot use WPS If you must use the WPS PIN code to connect select Scan instead of WPS Step 7 In the list of networks found select your wireless network and press OK If your network is not in the list because the network name is hidden you switched off the SSID broadcast of the router select Manual entry to enter the network name yourself Step 8 Depending on the type of router you can now enter your encryption key WEP WPA or WPA2 If you entered the encryption key for this network before you can select Next to make the connection immediately If your router supports WPS or WPS PIN you select WPS WPS PIN or Standard Select your choice and press OK Standard Select Standard to enter the encryption
48. TV From this Source menu you can switch to a device Sources menu To open the Sources menu press SOURCE To switch to a connected device select the device with the arrows left or p right and press OK For some devices HDMI CEC devices you can select an activity directly in the list underneath the device icon Select the device and select an activity and press OK To close the Source menu without switching to a device press SOURCE again 10 2 From standby With the TV in standby you can switch ona connected device with your TV remote control Play To switch on both disc player and TV from standby and start playing the disc or programme immediately press p play on the TV remote control The device should be connected with an HDMI cable and both TV and device must have HDMI CEC switched on Home Theatre System You can switch on your Home Theatre System to listen to an audio disc or a radio channel and leave the TV in standby To only switch on the HTS with the TV in standby press SOURCE on the TV remote control 42 10 3 EasyLink With EasyLink you can operate a connected device with the TV remote control EasyLink uses HDMI CEC to communicate with the connected devices Devices must support HDMI CEC and must be connected with an HDMI connection Ti Timers and clock 11 1 Sleeptimer With the sleep timer you can set the TV to switch to standby automatically after a preset
49. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition HD TV signals The SCART connection combines video and audio signals Use the SCART adapter cable to connect your device Audio Out Optical Audio Out Optical is a high quality sound connection This optical connection can carry 5 1 audio channels If your device typically a Home Theatre System HTS has no HDMI ARC connection you can use this connection with the Audio In Optical connection on the HTS The Audio Out Optical connection sends the sound from the TV to the HTS c You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System If the sound does not match the video on screen you can adjust the audio to video synchronisation 2 2 EasyLink HDMI CEC EasyLink With EasyLink you can operate a connected device with the TV remote control EasyLink uses HDMI CEC Consumer Electronics Control to communicate with the connected devices Devices must support HDMI CEC and must be connected with an HDMI connection Homi HIGH DEFINITION MULTIMEDIA INTERFACE EasyLink setup The TV comes with EasyLink switched on Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices EasyLink might not work with devices from other brands HDMI CEC on other brands The HDMI CEC functionality has different names on different brand
50. Universal access switched on the TV is set for use for hearing and visually impaired people Switch on If you did not switch on Universal access during the installation you can still switch it on in Setup To switch on Universal access 39 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings General settings Universal access and press OK 3 Select On and press OK 4 Press 5 repeatedly if necessary to close the menu With Universal access switched on in Setup the Universal access option is added in the Options menu Hearing impaired Switch on Digital TV channels can broadcast special audio commentary describing what is happening on screen To be able to set the visually impaired audio and effects you have to switch on Audio description first Also before you can switch on Audio description you have to switch on Universal access Audio description With Audio description a narrator s commentary is added to the normal audio To switch on the commentary if available 1 With Universal access switched on press OPTIONS and select the Options tab in the menu bar 2 Select Audio description and press OK 3 Select On and press OK You can check if an audio commentary is available In the Options menu select Audio language and look for an audio language marked with a oF Speakers H
51. a trademark bullet or euro sign A Skype password cannot contain a space If you don t have a Skype Name and Password yet you can create a new account on the sign in page on TV 1 On the sign in page select New account and press OK 2 Create your new account Full name Enter your full name Skype name Enter a name as your Skype name Your Skype Name will be shown in the list of contacts of other Skype users A Skype Name must begin with a letter upper or lowercase It must have 6 to 32 characters and can contain numbers A Skype Name cannot contain a space Password Enter your password Your password must have 6 to 20 characters and must at least contain one letter or one number It cannot contain special characters like a trademark bullet or euro sign A Skype password cannot contain a space Email Enter your email address 3 Read and accept the Skype Terms of Use 4 If your new account was accepted you are signed in You can edit or complete your Skype profile on your computer Start Skype on your computer sign in with your Skype Name and Password and open your Skype profile You can change your profile picture add a mood message or set the privacy settings Microsoft account If you have a Microsoft account you can use this account to sign in to Skype on TV To sign in with a Microsoft account 1 On the Skype Sign in page select Sign in with Microsoft account and press OK 2 Sel
52. able under the terms and conditions of the fuse license which can be found below Source http fuse sourceforge net libiconv 1 11 1 This library provides an iconv implementation for use on systems which don t have one or whose implementation cannot convert from to Unicode This piece of software is made available under the terms and conditions of the libiconv license which can be found below Source http ftp gnu org pub gnu libiconv 65 electric fence 2 1 13 Used for memory corruption detection This piece of software is made available under the terms and conditions of the electric fence license which can be found below Source http perens com FreeSoftware ElectricFenc e electric fence 2 1 13 O 1tar gz liveMedia When Wifi Display or streaming RtspPlayer are enabled This piece of software is made available under the terms and conditions of the electric fence license which can be found below Source www live555 com QT 47 0 Netflix skpe besttv pandora picasa will use QT This piece of software is made available under the terms and conditions of the QT license which can be found below Source http qt nokia com e2fsprogs 1 41 14 e2fsprogs provides the filesystem utilities for use with the ext2 filesystem it also supports the ext3 and ext4 filesystems This piece of software is made available under the terms and conditions of the e2fsprogs license which can be found below
53. age and press OK 3 Select a language and press OK 4 Press 5 repeatedly if necessary to close the menu To select an audio language when none of your preferred audio language is available 1 Press OPTIONS 2 Select Audio language and select an audio language you want temporarily and press OK Audio languages for the hearing and visually impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired Menu language To change the language or the TV menus and messages 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings General settings Menu language and press OK 3 Select the language you want and press OK 4 Press repeatedly if necessary to close the menu Interactive TV About iTV With interactive TV some digital broadcasters combine their normal TV programme with information or entertainment pages On some pages you can respond to a programme or vote do online shopping or pay for a video on demand programme HbbTV MHEG Broadcasters use various interactive TV systems HbbTV Hybrid Broadcast Broadband TV or iTV Interactive TV MHEG Interactive TV is sometimes referred to as Digital Text or Red button But each system is distinct Visit the broadcaster s Internet website for more information
54. al Home Menu 2 Select TV settings gt Sound Surround mode 3 Press p right and select Stereo or Incredible surround 4 Press repeatedly if necessary to close the menu Headphones volume With Headphones volume you can set the volume of a connected headphones separately To adjust the volume 1 Press OPTIONS and select Picture and sound in the menu bar 2 Press w down and select Headphones volume and press OK 3 Press A up or w down to adjust the volume 4 Press 5 repeatedly if necessary to close the menu Advanced sound settings Auto volume levelling With Auto volume leveling you can set the TV to automatically level out sudden volume differences Typically at the beginning of adverts or when you are switching channels To switch on or off 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound gt Advanced gt Auto volume leveling 3 Press p right and select On or Off 4 Press repeatedly if necessary to close the menu TV speakers You can send the TV sound to a connected audio device a Home Theatre System or audio system With TV speakers you select where you want to hear the TV sound and how you want to control it If you select Off you permanently switch off the TV 38 speakers If you select On the TV speakers are always on With an
55. ar range Both TVs have the same hardware type Check the hardware type on the TV type plate on the back of the TV Typically noted as Q LA Both TVs have compatible software versions Current version You can check the current version of the TV software with Current software infoin 4 gt Setup gt Software settings Copy channel list To copy a channel list 1 Switch on the TV which has its channels installed Plug in a USB memory device 2 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 3 Select TV settings gt General settings gt Channel list copy Copy to USB and press OK To copy the channel list from this TV you might be asked to enter the Child lock code you entered during the installation 4 When copying is done unplug the USB memory device Now you can upload the copied channel list onto another Philips TV Upload channel list Upload a copied channel list Depending on whether your TV is already installed or not you must use a different way to upload a channel list Toa TV that is not yet installed 1 Plug in the power plug to start the installation and select language and country You can skip Search for channels Finish the installation 2 Plug in the USB memory device that holds the channel list of the other TV 3 To start the channel list upload press and select Setup and press OK
56. blocked contact will be unable to contact you on Skype A blocked contact will not be notified you will appear as being offline in the contact list of the blocked contact You can always unblock contacts you have blocked To block a contact 1 On the Contacts page select the contact you want to block 2 Press OPTIONS and select Block and press OK The contact is blocked To unblock a contact 1 Select a contact that is blocked 2 Press OPTIONS and select Unblock and press OK The contact is unblocked To view a list of blocked contacts 1 In the Skype menu select Settings and press OK 2 Select Blocked contacts and press OK The list will show all contacts you have blocked Remove or rename You can Remove or Rename contacts To remove a contact 1 On the Contacts page select the contact you want to remove 2 Press OPTIONS and select Remove and press OK The contact is removed from the list To rename a contact 1 On the Contacts page select the contact you want to rename 2 Press OPTIONS and select Rename and press OK 3 Enter the new name for this contact in the text field To open the on screen keyboard press OK When you re done press OK 14 7 Calling on Skype 53 Video or voice call Make a Video call Make a Video call to call and see your friends on your TV screen To make a Video call 1 On the Contacts page select the contact you want to call 2
57. cessary to close the menu EasyLink Remote Control If you want devices to communicate but you don t want to operate them with the TV remote control you can switch off EasyLink remote control separately In the EasyLink settings menu select EasyLink remote control and select Off Pixel Plus Link Some devices a DVD or Blu ray Disc player might have their own picture quality processing To avoid bad picture quality caused by interference with the TV processing the picture processing of these devices should be disabled The TV comes with Pixel Plus Link switched on and disables the picture quality processing of recent Philips devices connected to the TV To switch off Pixel Plus Link in the EasyLink settings menu select Pixel Plus Link and select Off Auto subtitle shift If you play a DVD or Blu ray Disc on a Philips disc player that supports subtitles the TV can move the subtitles upwards Subtitles will be visible whatever Picture format you select The TV comes with Auto subtitle shift switched on To switch off Auto subtitle shift in the EasyLink settings menu select Auto subtitle shift and select Off Auto switch off devices You can set the TV to switch off the connecting HDMI CEC compliant devices if they are not the active source The TV switches the connected device to standby after 10 minutes of inactivity 2 3 Common interface CAM Cl This TV is ready for the Cl Conditional Access Wi
58. ch for the contact you are looking for and will show the search results 5 Select the contact you want and press OK to send a contact request 6 Write the request and press OK Skype will send the request message to your new contact If the contact accepts the request the Skype Name of the new contact will appear in the your list and you can call your contact on Skype Add a phone number In People the list of your contacts you can add a phone number as a contact You can call a phone with a Skype voice call You need Skype Credits to make a phone call To add a phone number 1 On the Contacts page press OPTIONS 2 Select Add a Phone Number and press OK 3 Enter the name of your contact To open the on screen keyboard press OK When you re done press OK 4 Enter the phone number of your contact Always start with a country code e g 31 for The Netherlands Do not use the double zero When you re done press OK The name of your phone number contact will appear in your list Accept a contact request When you receive a Contact request a small icon will show next to History in the Skype menu To accept a contact request 1 In the Skype menu select History and press OK 2 Select Contact requests and press OK Select the request and press OK Skype will ask you to accept this contact If you accept the contact will appear in your contact list Block a contact You can Block a Skype contact A
59. ch on the Universal access for people who are hearing and visually impaired You can set an age rating to prevent children from watching a rated programme and set or change your Child lock code You can switch on the Automatic channel update do a digital reception test or install analogue channels manually Languages This bundles some language settings for digital channels Universal access Bundles settings related to Universal access Channel installation This bundles some settings for automatic and manual channel installation Child lock Set a PIN code to lock or unlock channels and set an age for watching rated programs Connect to network Select to make connection to your wired or wireless network Network settings Here you can change settings related to your Network Update software This item is related to updating TV software Software settings Here you can see the current software version 8 2 Picture Picture style For easy picture adjustment you can select a preset setting with Picture style 1 While watching a TV channel press OPTIONS to open the Options menu 2 Select Picture and sound in the menu bar and select Picture style 3 Select a style and press OK The available Picture styles are Personal Your preferences made in Quick picture settings Vivid Ideal for daylight viewing Natural Natural picture settings Movie Ideal for watching mov
60. cture preferences in a few easy steps The settings you made are stored under the Picture style Personal You can return to your picture preference if some settings were changed You can set a preferred picture setting for every TV activity or connected device individually To return to your preferred picture setting while watching a TV channel press OPTIONS select Picture and sound in the menu bar select Picture style and select Personal To set a Quick picture setting 1 Press f select an activity or a connected device or its connection and press OK 2 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 3 Select Quick picture settings and press OK Go through the steps and finish The activity or connection has your personal preferences TV settings In the TV settings menu you can set all Picture and Sound settings The item General settings in the menu holds a collection of settings like Menu language Sleep timer Switch off timer Universal access and more Search for channels With Search for channels you can update your current channel list and possible newly found channels are added to the channel list You can also do a reinstallation of all channels A channel update or a channel reinstall may take some time 33 Channel settings In the Channel settings menu you can set your language preferences or swit
61. d press OK Professional Mode On Enter the Professional Home Menu Select Setup TV settings gt Sound gt Advanced gt ARC HDMI 2 6 Blu ray Disc player Use a High speed HDMI cable to connect the Blu ray Disc player to the TV ee If the Blu ray Disc player has EasyLink HDMI CEC you can operate the player with the TV remote control 27 DVD player Use an HDMI cable to connect the DVD player to the TV Alternatively you can use a SCART cable if the device has no HDMI connection UEM NEM If the DVD player is connected with HDMI and has EasyLink CEC you can operate the player with the TV remote control 28 Game console HDMI For best quality connect the game console with an High speed HDMI cable to the TV GEL NM Y Pb Pr Audio LR Connect the game console with a component video cable Y Pb Pr and an audio L R cable to the TV oo ooo 4 we t F Y shares the same jack with CVBS Component and Composite share audio jacks CVBS Audio L R Scart Connect the game console to the TV with a composite cable CVBS and an audio L R cable to the TV If your game console only has Video CVBS and Audio L R output use a Video Audio L R to SCART adapter to connect to the SCART connection Note the CVBS to SCART Adapter is not provided in the TV set T owe Video Audio LR ooo CVBS Audio LR Connect the game console to the
62. d tunes available to select 6 Alternatively a Wakeup channel can be selected from the list Alternatively alarm time can be set by pressing the ALARM button on the remote control 12 Network 12 1 Network 12 2 Wireless network What you need To connect the TV wirelessly to the Internet you need a wireless router Use a high speed broadband connection to the Internet CERTIFIED er Network devices The TV can connect to other devices in your wireless network like your computer or smartphone You can use a computer with Microsoft Windows or Apple OS X File sharing On this TV you can open photos music and videos stored on your computer Use a recent version of media server software like Philips MediaManager Windows Media Player 11 Twonky or similar Install the media server software on your computer and set it up to share your media files with the TV Read the manual of the media server software for more information This software must be running on your computer to view or play your files on TV You can download the Philips MediaManager software from the Philips support site www philips com support Make the connection Follow steps 1 to 5 Step 1 Make sure that the router of your wireless network is switched on Step 2 Professional Mode Off Press 4 and 44 select Setup and press OK Professional Mode On Enter the Professional Home Menu Step 3 Select
63. dels 5 Professional mode 5 1 What you can do In professional mode you can configure the TV for hotel use Features include Changing professional setup items such as power and speaker settings USB cloning Downloading software via RF including SSB firmware Smart TV and hotel information Change TV settings Install channels Change Network settings 5 2 Enter Professional Home Menu To enter the Professional Home Menu 1 Press 3 1 9 7 5 3 and x The professional setup menu appears The Professional Home Menu has items for Quick picture amp sound settings and TV settings Search for channels and Channel settings Connect to network and Network settings if applicable Update software and Software settings Professional settings menu 5 3 Enable Professional Home Menu Enable professional mode The Professional Mode will be already set to On if it was selected during the Virgin installation procedure To change the setting 1 In the professional mode menu select Professional Settings menu and press OK 2 Select Professional settings Professional mode gt On and press OK On Switch on professional mode Hospitality features are enabled Off Switch off professional mode The TV operates as a normal consumer TV 5 4 Professional settings menu Professional settings Dashboard This provides the selection of Default or Custom dashboard i e Home Menu
64. der To enter the value use the number keys Symbol rate 2 With the Symbol rate mode set to Manual you can enter a second symbol rate value you received from your cable provider To enter the value use the number keys Network frequency mode If you intend to use the fast Quick scan method in Frequency scan to search for channels select Automatic The TV will use 1 of the predefined network frequencies or HC homing channel as used by most cable providers in your country If you received a specific network frequency value to search for channels select Manual Network frequency With the Network frequency mode set to Manual you can enter the network frequency value received from your cable provider here To enter the value use the number keys Frequency scan Select the method of searching for channels You can select the faster Quick scan method and use the predefined settings used by most cable providers in 30 your country If this results in having no channels installed or if some channels are missing you can select the extended Full scan method This method will take more time to search for and install channels Frequency step size The TV searches for channels in steps of 8MHz If this results in having no channels installed or if some channels are missing you can search in smaller steps of IMHz Using the IMHz steps will take more time to search for and install channels Digital chan
65. e Home menu to start watching TV or start watching a disc on your Home Theatre System Also in the Home menu you can open Smart TV to surf the Internet start Skype Open the Home menu 1 To open the Home menu press 2 Select an activity using the arrow keys and press OK to start the activity 3 To close the Home menu without changing the current activity press Guest Menu Select Guest Menu to install channels or adjust all TV settings Guest Menu Select Guest Menu to adjust TV settings TV Select TV and press OK to watch TV channels Smart TV Select Smart TV and press OK to open the Smart TV start page Source Select Source and select a connected device in the list underneath the icon Press OK to switch to the selected device TV guide Select TV guide and press OK to open a list of the current and scheduled TV programmes of your channels Smart Info Select Smart Info to show information provided by the Hotel Skype Select Skype to make video calls for free MyChoice Select MyChoice to be able to select premium services made available through MyChoice service DirectShare Select DirectShare to view Movies pictures or play music from mobile device to the TV Miracast Select Miracast to mirror the content of your mobile device display on to the TV 32 8 Settings 8 1 Setup menu Quick picture settings With Quick picture settings you can set your basic pi
66. e and press OK 3 Press A up or w down to adjust the volume 4 Press 4 repeatedly if necessay to close the menu c 3 Remote control 3 1 Key overview Top 1 Standby On To switch the TV On or back to Standby 2 MYCHOICE To switch on mychoice 3 CHANNEL GRID To open or close the channel grid 4 SOURCE To open or close the Sources menu the list of connected devices 5 CLOCK To display the clock 6 SMART TV To open the Smart TV start page Only for Smart TV s 7 ALARM To set the alarm 8 SMART INFO To open the smart information page 9 FORMAT To open or close the Picture format menu 10 TV To switch back to watching TV Middle 1 HOME To open or close the home menu 2 GUIDE To open or close the TV guide 3 ADJUST To open the Adjust menu 4 BACK To switch back to the previous channel you selected To close a menu without changing a setting To go back to the previous Smart TV page 5 Play Pause Play p to playback Pause n to pause playback 6 INFO To open or close programme info 7 OKkey To confirm a selection or setting 8 Arrow navigation keys To navigate up down left or right 9 OPTIONS To open or close the Options menu Bottom 1 Channel To switch to the next or previous channel in the channel list To open the next or previous page in Text or start the next or previous chapter on a disc
67. e subtitles when the TV starts Blue mute Turn the TV screen to blue and mute the sound if there is no signal detected Enable CI slot Enable or disable the Cl slot Wi Fi Direct Cross Connection Enable or disable Wi Fi Direct Cross Connection Wi Fi Miracast Enable or disable the Miracast DirectShare Enable or disable the DirectShare feature Scrambled Program OSD When disabled scrambled programmes will not be visible to guests Wi Fi Lost OSD When disabled no message will be shown when the WiFi connection of the TV is lost Joint Space Enable or disable the Joint Space feature Easylink Break in Easylink control Enable or disable access to various EasyLink features Enable Skype Enable or disable Skype feature Digit Time Out Sets the time out for the Digit OSD Selectable AV The different AV connections can be selected to show up in the Source list Watch TV To select which source to select when using the Watch TV icon button Clock setup External Clock Enable or disable the external clock Clock brightness at Dim Light This sets the level of brightness of the LCD clock when the environmental light conditions are dim Clock brightness at Intense Light This sets the level of brightness of the LCD clock when the environmental light conditions are bright Clock Light Sensor Sensitivity This sets the sensitivity level of the light sensor to sense environm
68. e sure that all cables are properly connected Previously installed channels are not in the channel list Make sure that the correct channel list is selected General The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it Make sure that the power cable is securely connected Creaking sound at startup or switch off When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance TV does not respond to the remote control The TV requires some time to start up During this time the TV does not respond to the remote control or TV controls This is normal behaviour If the TV continues to be unresponsive to the remote control you can check if the remote control is working by means of a mobile phone camera Put the phone in camera mode and point the remote control to the camera lens If you press any key on the remote control and you notice the infra red LED flicker through the camera the remote control is working The TV needs to be checked If you do not notice the flickering the remote control might be broken or its batteries are low This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV The TV goes back to standby after
69. e that no part of the TV hangs over the edge of the mounting surface Never place the TV on tall furniture such asa bookcase without anchoring both the furniture and TV to the wall or a suitable support Teach children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries The remote control may contain coin type batteries which can easily be swallowed by small children Keep these batteries out of reach of children at all times Risk of overheating Never install the TV in a confined space Always leave a space of at least 10 cm or 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet Humidity In rare occasions depending on temperature and humidity minor condensation can occur on the inside of the TV glass front on some models To prevent this do not expose the TV to direct sunlight heat or extreme humidity I
70. eadphones With Speakers Headphones you can select where you want to hear the audio commentary On the TV speakers only on the headphones only or on both To set Speakers Headphones 1 Press and select Setup and press OK 2 Select Channel settings gt Languages gt Audio description gt Speakers Headphones and press OK 3 Select Speakers Headphones or Speakers headphones and press OK 4 Press repeatedly if necessary to close the menu Visually impaired Mixed volume You can mix the volume of the normal audio with the audio commentary To mix the volume 1 Press OPTIONS and select Universal access in the menu bar 2 Select Mixed volume and press OK 3 Use the arrows up and down to set the slider bar 4 Press OK to confirm Audio effect Some audio commentary can hold extra audio effects like stereo or fading sound To switch on Audio effects if available 1 Press and select Setup and press OK 2 Select Channel settings gt Languages gt Audio description gt Audio effects and press OK 3 Select On or Off and press OK 4 Press repeatedly if necessary to close the menu Speech The audio commentary can also hold subtitles for the words which are spoken To switch on these subtitles if available 1 Press andselect Setup and press OK 2 Select Channel settings Languages Audio description gt Speech and press OK 3 Select Desc
71. ect Next and press OK The TV will open the Microsoft account sign in web page 3 Enter your Microsoft account email and password 4 Select the Submit button and press OK 51 No emergency calls No emergency calls with Skype Skype is not a replacement for your telephone and cannot be used for emergency calling sfa 14 4 Skype menu When you have signed in successfully Skype opens the Skype menu The Skype menu items are My profile your Skype name To view or modify your Skype profile Select your Skype Name and press OK People In People you can start making a Skype call and manage your contacts Call phones In Call phones you can call a landline or a mobile phone number by dialing the number on a dial pad You must have Skype Credit or a Skype subscribtion to call a phone number You can t select Call phones if a camera and microphone are not connected History In History you can view your missed and former calls or view Contact requests Settings In Settings you can change your password set your privacy and voicemail settings or view your blocked contacts and much more Sign out To sign out of Skype on TV 14 5 My profile In My profile you can edit your personal profile for Skype Public View or change your profile information that can be viewed by your contacts Phone You can enter or change your home office or mobile phone number here Private View
72. ed by the other with the necessary settings Once each system is installed you need to switch the antenna input signal on the Antenna connection on the back of the TV and set the TV in the appropriate system to view the installed channels on TV To select the DVB T or DVB C setting see above DVB settings Access DVB settings 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Search for channels and press OK 3 Select Re install Channels 4 Select the country where you install this TV 5 Select Cable DVB C 6 Select Start to search channels or select Settings for DVB C settings 7 Press 9 repeatedly if necessary to close the menu Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels leave the Symbol rate mode setting on Automatic If you received a specific symbol rate value select Manual However the value you received could be in the predefined list of symbol rates already Select Predefined symbol rates to check if your value is available automatically Predefined symbol rates With the Symbol rate mode set to Automatic the TV will use 1 of the predefined symbol rates as used by most cable providers in your country Symbol rate With the Symbol rate mode set to Manual you can enter the symbol rate value you received from your cable provi
73. edit or Skype Subscriptions With Skype for a little cost you can also call phones or mobile phones Using your computer you can buy Skype Credit or take a Skype subscription at www skype com No emergency calls Skype is not a replacement for your telephone and cannot be used for emergency calling 14 3 Start with Skype Install the camera Connect the TV camera cable to one of the USB connections on the TV Bend the small clamp as shown in the illustration below and position the camera on the top of the TV Point the camera to the position you usually sit at When you are making a Skype call you can pan tilt or zoom in or out the camera image You can position the camera anywhere you want but it is recommended to put it away from the speakers of the TV If the TV camera is not connected Skype will not start 50 Sign in Sign in to Skype with your Skype Name and password If you don t have a Skype Name yet you have to create a new Skype account To sign in to Skype 1 Press to open the Home menu 2 Select Skype and press OK to start Skype and open the Sign in page 3 Select the Skype Name text field and enter your Skype Name To open the on screen keyboard select the text field and press OK If you have signed in before press zs GUIDE and select your Skype Name The TV remembers the 5 last Skype Names that signed in 4 Select the Password text field and enter your password 5 When done
74. elect Setup and press OK Professional Mode On Enter the Professional Home Menu Select TV settings General settings Switch off timer and set the slider bar to Off Audio Out settings Audio Out delay With a Home Theatre System HTS connected to the TV the picture on TV and the sound from the HTS should be synchronised Automatic audio to video sync With recent Philips Home Theatre Systems the audio to video sync is done automatically synchronised and always correct Audio sync delay For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video On the HTS increase the delay value until there is a match between picture and sound A delay value of 180ms may be required Read the user manual of the HTS With a delay value set up on the HTS you need to switch off Audio out delay on the TV To switch off the Audio Out delay 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound gt Advanced gt Audio out delay 3 Select Off and press OK 4 Press repeatedly if necessary to close the menu Audio Out offset If you cannot set a delay on the Home Theatre System you can set the TV to sync the sound You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture
75. ental light conditions Time Download To select from which source the time will be retrieved Manual RF channel or IP channel Time Setting Manually enter the time This is only enabled when Time download is set to Manual Time Download Program Define which channel to extract the time from Only visible when Time Download is set to RF NTP Server URL Define which URL to extract the time from Only visible when Time Download is set to IP Country Selection Set the country in which the TV is being installed Time Zone Set the time zone in which the TV is being installed Daylight Saving Enable or disable daylight saving Time offset Add to or subtract from the extracted time value Reference Date Define whether the date is referenced from the TV Reference Time Define whether the time is referenced from the TV Speaker settings Set the audio output of the TV If independent external speakers are attached they will match the audio of the TV speakers TV speaker enable Enable or disable TV speakers Independent main speaker mute Enable or disable external speakers Default main speaker volume Define the default volume to be applied when speakers are unmuted Installation Blank Channel Provides a list of the installed channels that can be selected to blank Free scrambled Select to install only Free To Air channels or also Scrambled channels Multi remote control Pair up to four RCs to
76. er formats Resolutions amongst others 640 x 480p 60 Hz 800 x 600p 60 Hz 1024 x 768p 60 Hz 1280 x 768p 60 Hz 1360 x 765p 60 Hz 1360 x 768p 60 Hz 60 1280 x 1024p 60 Hz 1920 x 1080p 60 Hz 16 4 Power Product specifications are subject to change without notice For more specification details of this product see www philips com support Power Mains power AC 220 240V 10 Ambient temperature O C to 40 C Standby power consumption lt O 3W Power saving features Energy saving Screen off Light sensor Switch off timer Inactive devices off The power rating stated on the product typeplate is the power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 16 5 Dimensions and weights 28HFL5010 without TV stand Width 635 1 mm Height 392 7 mm Depth 73 7 mm Weight 4 5 kg with TV stand Width 635 1 mm Height 441 1 mm Depth 190 mm Weight 5 07 kg 32HFL5010 without TV stand Width 726 5 mm Height 425 4 mm Depth 76 8 mm Weight 4 96 kg with TV stand Width 726 5 mm Height 488 6 mm Depth 179 2 mm Weight 6 24 kg 4OHFL5010 without TV stand Width 903 5 mm Height 511 8 mm Depth 76 8 mm Weight x77 kg with TV stand Width 903 5 mm Height 573 8 mm Depth 213 1 mm Weight x9 1 kg 48HFL50
77. ess OK You can listen to a voicemail as many times you want To manage your voicemails press OPTIONS 14 8 Skype credit On Skype you can buy Skype Credit or take a Skype subscription With Skype Credit or a Skype subscription available you can call landline phones and mobile phones with your TV Buy Skype Credit To buy Skype Credit or take a Skype subscription sign in to Skype on your computer The Skype Credit you buy will be available when you sign in to Skype on your TV The amount of credit or the subscription information is shown on each page where you can make a phone call Skype Credit low You will be notified if your credit is too low to make a phone call 14 9 Skype settings Signing in You can set Skype to automatically sign in when you select Skype from the Home menu You do not need to enter your Skype Name or password To sign in when Skype starts 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Select Signing in and press OK 4 Press p right to select the check box and press OK to mark Sign me in when Skype starts Change password You can change your current Skype password and enter a new password for your Skype account To change your password 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Select Change password 4 Press y right to select Current password and enter your cur
78. essional Mode On Enter the Professional Home Menu 2 Select Channel settings and press OK 3 Select Channel installation Automatic channel update Off and press OK Start an update To start an update yourself 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Search for channels and press OK 3 Select Update channels and follow the instructions on screen The update may take a few minutes In certain countries the Automatic channel update is done while watching TV or any moment when the TV is in standby New channels New channels added with the automatic channel update are easy to find in the channel list New The same new channels are also stored in the All or Radio channel list New channels are kept in the channel list New as long as you don t mark them as a favourite or tune to them Reinstall channels You can search for and reinstall channels and leave all other TV settings untouched Alternatively you can do a full new TV installation If a child lock code is set you will need to enter this code before you can reinstall channels Reinstall channels To reinstall the channels only 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Search for channels Re install channels and press OK 3 Select the c
79. etwork configuration to DHCP or Static IP Static IP configuration If Static IP is selected in Network Settings menu you can set all necessary static IP settings here Reset Wi Fi Miracast group Clear the list of connected and blocked devices that are used with Miracast Clear Internet memory With Clear Internet memory you can clear all Internet files stored on your TV You clear your Philips Smart TV registration and parental rating settings your video store app logins all Smart TV app favourites Internet bookmarks and history Interactive MHEG applications can also save so called cookies on your TV These files will also be cleared 46 13 Your photos videos and music 13 1 From a USB connection or computer What you need You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive If you have a computer in your home network you can view and play your files from your computer on the TV From a USB device With the TV switched on plug in a USB flash drive or USB Hard Drive to one of the USB connections The TV detects the device and lists your files If the list does not appear automatically press SOURCE select Browse USB and press OK Warning If you try to pause or record a programme with a USB Hard Drive connected the TV will ask you to format the USB Hard Drive This formatting will delete all current files on the USB Hard Drive Menu
80. f condensation occurs it will disappear spontaneously while the TV is playing for a few hours The condensation moisture will not harm the TV or cause malfunction 19 2 Screen care Never touch push rub or strike the screen with any object Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth and wipe gently Never use substances such as alcohol chemicals or household cleaners on the TV To avoid deformations and colour fading wipe off water drops as quickly as possible Avoid stationary images as much as possible Stationary images are images that remain onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage 73 20 Terms of use copyrights and licenses 20 1 Terms of use 2015 TP Vision Europe B V All rights reserved This product was brought to the market by TP Vision Europe B V or one of its affiliates hereinafter referred to as TP Vision which is the manufacturer of the product TP Vision is the warrantor in relation to the TV with which this booklet was packaged Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners TP Vision reserves the right t
81. f new software is available download the zip file After the download unzip the file and copy the file autorun upg onto the USB memory device Do not place this file in a folder 4 Update the TV software Insert the USB memory into the TV again The update starts automatically The TV switches itself off for 10 seconds and then back on again Please wait Do not use the remote control remove the USB memory device from the TV If a power cut occurs during the update never remove the USB memory device from the TV When the power returns the update will continue At the end of the update the message Operation successful appears on screen Remove the USB memory device and press o on the remote control Do not press b twice press the power switch on the TV The TV switches itself off for 1O seconds and then back on again Please wait The TV software has been updated You can use the TV again 62 To prevent an accidental update of the TV software delete the autorun upg file from the USB memory device Update from Internet If the TV is connected to the Internet you may receive a message from TP Vision to update the TV software You need a high speed broadband Internet connection If you receive this message we recommend you carry out the update Select Update Follow the instructions on screen You can also look for new updates yourself To look for an update 1 Press and
82. fessional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Colour 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Contrast With Contrast you can adjust the contrast of the picture To adjust the contrast 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Contrast 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Sharpness With Sharpness you can adjust the level of sharpness in fine detail of the picture To adjust the sharpness 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Picture Sharpness 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Advanced picture settings Colour settings Colour enhancement With Colour enhancement you can enhance the colour intensity and the details in bright colours To adjust the level 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional
83. gnal for 10 minutes the TV switches off automatically to save energy If you use the TV as a monitor or use a digital receiver to watch TV a Set top box STB and you do not use the remote control of the TV deactivate the automatic switch off In addition to the Eco settings your TV also has environmentally friendly technology with regard to power consumption Inactive devices off Switch off connected EasyLink HDMI CEC Consumer Electronic Control compliant devices that are inactive 59 European energy label The European Energy Label informs you on the energy efficiency class of this product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of this product in use and the average energy consumption for 1 year You can also find the power consumption values for this product on the Philips website for your country at www philips com TV End of use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to y
84. gt Colour gt Custom colour temperature 3 Press p right 4 Select a setting with the arrow keys WP is white point and BL is black level 5 Press OK to confirm a setting You can also select 35 one of the presets in this menu 6 Press 5 repeatedly if necessary to close the menu Contrast settings Contrast modes With Contrast modes you can set the level at which power consumption can be reduced by dimming the intensity of the screen Choose for the best power consumption or for the picture with the best intensity To adjust the level 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced gt Contrast gt Contrast modes 3 Press p right and select power Standard or Off 4 Press repeatedly if necessary to close the menu Best picture Best Dynamic contrast With Dynamic contrast you can set the level at which the TV automatically enhances the details in the dark middle and light areas of the picture To adjust the level 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Picture Advanced gt Contrast Dynamic contrast 3 Press p right and select Maximum Medium Minimum or Off 4 Press repeatedly if necessary to close the me
85. h this product Kensington K Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world Other trademarks All other registered and unregistered trademarks are the property of their respective owners 76 Index A Activity style 37 Amplifier audio system 38 Antenna connection 4 Antenna connection tips 5 App rental videos 58 Apps feedback 57 Apps lock 57 Apps open 57 Apps recommended 57 Apps search 57 Audio commentary 39 Audio description 39 Audio language 26 Audio Out Optical 6 Audio to video sync 9 Auto subtitle shift 7 Auto volume levelling 38 Automatic channel update 27 B Backlight contrast 34 Bass 37 Blu ray Disc connect 10 Brightness 35 Brightness word mark 16 C CAM Conditional Access Module 7 CAM install 7 Channel list copy 28 Channel list copy 28 Channel list new 28 Channel lock 23 Channel update message 27 Channel favourite 22 Channel options 24 Channel problems 69 Channel status 24 Channel switch 22 Channels rename 23 Channels update 27 Child lock code 23 Cl 7 Clear sound 38 Clock 43 Colour 34 Colour Colour enhancement 35 Colour Colour temperature 35 Common Interface slot 7 Consumer Care 70 Contact Philips 70 Contrast 34 Contrast Brightness 35 Contrast Contrast modes 35 Contrast Dynamic contrast 35 Cont
86. hannels Load Key to USB To load the Vsecure key to USB flash drive Load Key to TV To load the Vsecure key from USB flash drive to TV Vsecure Self Test To initiate self test for Vsecure Erase Key Option To select which Key to be erased Erase Key To effectively erase the selected Key Clone Upgrade Easily copy TV settings to a USB storage device then clone the settings onto another Philips TV RF Clone Program Info To set the frequency the medium and the symbol rate of the channel for cloning via RF Clone to TV Initiate cloning from USB flash drive to the TV Select Clone to TV To select which clone file on the USB to clone to the TV Clone to USB To initiate download of clone items from TV to USB flash drive Upgrade Mode This sets the firmware upgrade mode to RF or IP Start Upgrade To manually trigger instant firmware upgrade Auto Upgrade Enable or disable automatic firmware upgrade 5 5 MyChoice setup Ask For PIN To request for the pin code to enable MyChoice package Free Package To select the list of channels to group in this package Package 1 To select the list of channels to group in this package Package 2 To select the list of channels to group in this package 56 Combine channel list This enables or disables a combined list of channels and AV sources 5 7 Smart TV Settings Smart TV can be disabled or set to show default conten
87. he Joystick on the right side or on the back of the TV to put the TV in standby the red indicator will light up With the TV in standby press on the remote control to switch the TV on Switch to standby To switch the TV to standby press on the remote control Switch Off To switch the TV Off press the Joystick on the right or on the back The red indicator light is off The TV is still connected to the mains power but consumes a minimum of energy To switch off the TV completely disconnect the power plug When disconnecting the power plug always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times 4 2 Keys on TV While the on screen display is on press the Joystick to display the menu Use the arrow navigation keys to navigate up down left or right Press the Joystick to confirm a selection or setting 4 3 Word mark brightness You can switch off or adjust the word mark lighting To adjust or switch off 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Word mark brightness and press OK 3 Select Maximum Medium Minimum or select Off to switch off the lighting of the word mark 4 Press repeatedly if necessary to close the menu Only available for certain TV mo
88. he device on the TV enter the numbers with the digit keys on the remote control Alternatively you might be asked by the TV to enter a PIN code on the device If you connect the TV will show the screen of the device 6 On the device select the videos photos or files you want to watch on TV Miracast is supported by WiDi 3 5 onwards Stop sharing From the device With the application you use to start Miracast you can disconnect and stop watching the screen of the device on TV The TV will switch back to the last selected programme From the TV To stop watching the screen of the device on TV you can press TV to watch a TV broadcast press 4 amp to start another activity on TV press SOURCE to open the Sources menu and select a connected device Block a device The first time you receive a request to connect from a device you can block the device This request and all requests in the future from this device will be ignored To block a device select Block in the request window and press OK Unblock all devices All previously connected and blocked devices are stored in the Wi Fi Miracast list of connections If you Clear this list all blocked devices will be unblocked To unblock all blocked devices 49 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Network settings Reset Wi Fi d
89. hilips TV which fall either under the GNU General Public License the GPL or the GNU Lesser General Public License the LGPL or any other open source license Instructions to obtain source code for this software can be found in the user manual PHILIPS MAKES NO WARRANTIES WHATSOEVER EITHER EXPRESS OR IMPLIED INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THIS SOFTWARE Philips offers no support for this software The preceding does not affect your warranties and statutory rights regarding any Philips product s you purchased It only applies to this source code made available to you Freetype 2 4 3 FreeType is a software font engine that is designed to be small efficient highly customizable and portable while capable of producing high quality output glyph images This piece of software is made available under the terms and conditions of the FreeType Project license which can be found below Source http freetype sourceforge net zlib 1 2 3 The zlib compression library provides in memory compression and decompression functions including integrity checks of the uncompressed data This piece of software is made available under the terms and conditions of the zlib license which can be found below Source http www zlib net Fraunhofer AAC Ecnoder 3 3 3 AAC Ecnoder Source Android JB source code unicode 3 2 This library is used to perform UNICOD
90. hmac shal c gSoap 2 7 15 The gSOAP toolkit is an open source C and C software development toolkit for SOAP XML Web services and generic non SOAP C C XML data bindings Part of the software embedded in this product is gSOAP software Portions created by gSOAP are Copyright 2000 2011 Robert A van Engelen Genivia inc All Rights Reserved Source http sourceforge net projects gsoap2 jquery 1 10 2 jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing event handling animating and Ajax interactions for rapid web development Source http jquery com Libupnp 1 2 1 The Linux SDK for UPnP Devices libupnp provides developers with an API and open source code for building control points devices and bridges that are compliant with Version 1 0 of the UPnP Device Architecture Specification Source http upnp sourceforge net mDNSResponder mDNSResponder 320 10 80 The mDNSResponder project is a component of Bonjour Apple s ease of use IP networking initiative lt http developer apple com bonjour gt In our project Bonjour is used for the automatic discovery of devices and services Source http developer apple com bonjour 68 18 Troubleshooting and support 18 1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure that your TV supports DVB T or DVB C in your country Mak
91. ies Standard Factory standard settings Photo Ideal for viewing photos Adjust a Picture style You can adjust a Picture style 1 Select the style and press OK 2 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 3 Select TV settings navigate to the individual setting and adjust it 4 Press repeatedly if necessary to close the menu To return to the original Picture style values 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Picture style and select the style you want to reset 3 Press e Reset The style is reset Vivid If the Picture style is switched back to Vivid every time you switch on the TV the TV location is set to Shop A setting meant for in store promotion To set the TV for Home use 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 3 Select Home and press OK 4 Press 5 repeatedly if necessary to close the menu 34 Picture settings Colour With Colour you can adjust the colour saturation of the picture To adjust the colour 1 Pro
92. ile formats are supported by the TV Choppy playback of USB files The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback 18 2 Hegister Register your TV and enjoy a range of benefits including full support including downloads privileged access to information about new products exclusive offers and discounts the chance to win prizes and even participate in special surveys about new releases Go to www philips com welcome 18 3 Online help To solve any Philips TV related problem you can consult our online support You can select your language and enter your product model number Go to www philips com support On the support site you can find your country s telephone number to contact us as well as answers to frequently asked questions FAQs In some countries you can chat with one of our colaborators and ask your question directly or send a question by email You can download new TV software or the manual to read on your computer 18 4 Consumer Care Repair For support and repair call the Consumer Care hotline in your country Find the telephone number in the printed documentation that came with the TV Or consult our website www philips com support TV model number and serial number You might be asked to provide the TV product model number and serial number Find these numbers on the packaging label or on the type label on the bac
93. ing the TV stand in the Quick Start Guide that came with the TV In case you lost this guide you can download it from www philips com Use the product type number of the TV to look for the Quick Start Guide to download Wall mounting Your TV is also prepared for a VESA compliant wall mount bracket sold separately Use the following VESA code when purchasing the wall mount To fix the bracket securely use screws with a length indicated in the drawing 2B8HFL501OT VESA MIS F 100x100 M4 Minimum 7 5 mm Maximum 8 5 mm B2HFL5010T VESA MIS F 100x100 M4 Minimum 8 mm Maximum 14 mm AOHFL5OI1OT VESA MIS F 200x200 M4 Minimum 12 mm Maximum 16 mm 4BHFL501OT VESA MIS F 200x200 M6 Minimum 12 mm Maximum 16 mm 5bHFL50O1OT VESA MIS F 400x200 M6 Minimum 12 mm Maximum 16 mm Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel The TV wall mounting should meet safety standards according to the TV s weight Also read the safety precautions before positioning the TV TP Vision Europe B V bears no responsibility for improper mounting or any mounting that results in accident or injury Note Before mounting the TV on the wall remove the existing VESA screws on the back panel Warning Follow all instructions provided with the TV mount TP Vision Europe B V bears no responsibility for improper TV mounting that results in accident
94. ings gt Picture gt Advanced gt Sharpness Noise reduction 3 Press p right and select Maximum Medium Minimum or Off 4 Press repeatedly if necessary to close the menu MPEG artefact reduction With MPEG artefact reduction you can smoothen the digital transitions in the picture MPEG artefacts are mostly visible as small blocks or jagged edges in images To reduce the MPEG artefacts 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced gt Sharpness MPEG artefact reduction 3 Press p right and select Maximum Medium Minimum or Off 4 Press repeatedly if necessary to close the menu Game or computer You can switch the TV to the ideal picture setting for gaming or for using the TV as a computer monitor There is a different setting for Game or Computer If a device has a correct type set in the Source menu Game console or Computer the TV switches automatically to the ideal setting when you switch to the device If you switch the setting manually do not forget to switch it off when you switch to watching TV or another connected device To switch the setting manually 1 Press and select Setup and press OK 2 Select TV settings gt Picture gt Advanced gt Activity style 3 Select Game Computer or TV The setting TV returns to the pictu
95. injury or damage To prevent damage to cables and connectors leave a gap of at least 5 5 cm 2 2 inches from the back of the TV Before you mount the TV on the wall find the correct length of the screw To find the length of the screw add the thickness of your wall mount to the screw length 1 3 Tips on placement Position the TV where light does not shine directly on the screen Dim lighting conditions in the room for best Ambilight effect Position the TV up to 15 cm away from the wall The ideal distance to watch TV is 3 times its diagonal screen size When seated your eyes should be level with the centre of the screen Ambilight function is only for TVs with Ambilight 1 4 Power cable Insert the power cable into the POWER connector on the back of the TV Make sure the power cable is securely inserted in the connector Make sure that the power plug in the wall socket is accessible at all times When you unplug the power cable always pull the plug never pull the cable 08 Ll J Although this TV has a very low standby power consumption unplug the power cable to save energy if you do not use the TV for a long period of time 1 5 Antenna cable Insert the antenna plug firmly into the ANTENNA Socket at the back of the TV You can connect your own antenna or an antenna signal from an antenna distribution system Use an IEC Coax 75 Ohm RF antenna connector Use this ante
96. ious page Alternatively press CH 4 Next page or CH Previous page Open an App To open an App 1 Press and select Smart TV 2 Onthe start page select the desired Country Flag and Press OK 3 Select an App icon and press OK 4 n an App press 5 to go back 1 step or page Close an App To close an App and return to the Smart TV start page press SMART TV Reload an App page If an App page did not load properly press OPTIONS and select Reload to reload the page Zoom To zoom in on an App page 1 Press OPTIONS and select Zoom page 2 Use the slider bar to set the zoom level 3 Return to normal view by resetting the slider bar View security info You can check the security level of an App page On an App page press OPTIONS and select Security info If a lock is shown next to the loading animation on the bottom of the screen while loading a page the transfer is secured Rental video Apps With the video store Apps in Smart TV you can rent your favourite movie from an online rental video store You can pay securely with your credit card Rent a movie 1 Open a Video store App in your list of Apps or select a recommended video on the Smart TV start page 2 Select a movie 3 Make the online payment 4 Start watching You can use the p Play and i Pause keys Most Video stores ask you to create a login account Streaming video With this TV you can watch rental
97. irect group 3 Press OK to clear the list 4 Press repeatedly if necessary to close the menu Blocking a previously connected device If you want to block a device that you previously connected you need to clear the Wi Fi Miracast connections list first If you clear this list you will have to confirm or block the connection for every device again Screen delay The normal delay when sharing a screen with Miracast is about 1 second The delay might be longer if you are using older devices computers with less processing power Specifics Miracast on this TV is subject to the HDCP protocol and cannot display copy protected premium content sent by a device The maximum video resolution supported is 720p Skype About Skype With Skype you can make video calls on your TV for free You can call and see your friends from anywhere in the world Talk to your friends while watching them on the big screen of your TV 14 2 What you need To make a video call on Skype you need the separately sold Philips PTA317 TV camera with a built in microphone and a good connection to the Internet Before you can start Skype the TV must have a good quality connection to the Internet You can connect your TV either wireless or wired Skype account To use Skype you need to create a Skype account for yourself or for your family You can create a new account for Skype on your TV or on your computer Skype Cr
98. ium Belgi Belgique Sweden Sverige 02 7007360 Kazakhstan KasakcraH 08 6320 016 727 246 44 83 90 Bosna Hecegovina Switzerland Schweiz Suisse 38733 5356 33 Latvia Latvija 0223 1021 16 800 03 448 Bulgaria Barapua Turkey T rkiye 4 0 0800 1154426 Lithuania Lietuva TORUM 880 030 043 Ukraine Ykpa Ha Croatia Hrvatska L380 44 392 8698 0800 222 782 Luxembourg Luxemburg 38 056 232 00 45 Comel WEBS 38 044 245 73 31 Topaz Czech Republic Cesk Topaz republika Macedoni 800 142100 389 2 109 857 United Kingdom 020 7949 0069 Denmark Danmark Netherlands Nederlands 352 587 61 010 4289533 Middle East and Africa Bahrain 97317700424 Estonia Eesti Vabariik Norway Norge Iran 98218756940 800 0044 307 22 70 82 50 Kuwait 4565 9654842988 Finland S Lebanon 9611684900 o 208 Dis DS Poland Polska Morocco 022302992 022 349 1505 Qatar 9744422221 France Saudi Arabia 96626292929 Portugal Syria 96321234994 01 57324070 0800 780 902 United Arab Emirates Georga Al Gandi 97143376600 995 32 99 70 25 Romania Rom nia Gulf 97125553754 03 727 66905 Germany 0696 640 4383 Russia Poccua 495 961 11 11 Greece EAAGda 8 800 200 08 80 0 0800 3122 1223 This information is correct at the time of print For updated information see www philips com support Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners 2015 TP Vision Europe B V All rights reserved
99. ividual setting and adjust it Press 45 to close the menu to store your setting To return to the original Sound style values 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound Sound style and select the style you want to reset 3 Press Reset The style is reset Sound settings Bass With Bass you can adjust the level of low tones in the sound To adjust the level 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound gt Bass 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Treble With Treble you can adjust the level of high tones in the sound To adjust the level 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound gt Treble 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Surround mode With Surround mode you can set the sound effect of the TV speakers To set the surround mode 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Profession
100. k or bottom of the TV 4 Warning Do not attemp to repair the TV yourself This may cause severe injury irrepairable damage to your TV or void your warranty 71 19 Safety and care 19 1 Safety Important Read and understand all safety instructions before you use the TV If damage is caused by failure to follow instructions the warranty does not apply Secure the TV from falling over Always use the supplied wall bracket to secure the TV from falling over Mount the bracket and secure the TV onto the bracket even if you put the TV on the floor You can find the mounting instructions in the Quick Start Guide that came with the TV In case you lost this guide you can download the guide from www philips com Use the product type number of the TV to look for the Quick Start Guide to download Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips TV Consumer Care to have the TV checked before use Never expose the TV remote control or batteries to excessive heat Never place them near burning candles naked flames or other heat sources including direct sunlight Never insert objects into the ventilation slots or other openings on the TV Never place heavy objects on the power cord Avoid force coming onto power
101. key password passphrase or security key manually You can use the keyboard on the RC to enter the encryption key Once you have entered the key press Connect WPS PIN To make a secured WPS connection with a PIN code select WPS PIN and press OK Write down the 8 digit PIN code shown and enter it in the router software on your PC Return to the TV and press Connect Consult the router manual on where to enter the PIN code in the router software Step 9 Amessage will be shown when the connection is successful Network configuration If the connection fails you can check the DHCP setting of the router DHCP should be set to On Alternatively if you are an advanced user and want to install your network with Static IP addressing set the TV to Static IP To set the TV to Static IP Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu Select Network settings gt Network settings gt Network configuration gt Static IP With Static IP selected in the menu you can set the IP address and other necessary settings in Static IP configuration in the same menu Network problems Wireless network not found or distorted Microwave ovens DECT phones or other Wi Fi 802 11b g n devices in your proximity might disturb the wireless network Make sure that the firewalls in your network allow access to the TV s wireless connection If the wirele
102. language and press OK 3 Select a language and press OK 4 Press repeatedly if necessary to close the menu To select a subtitle language when none of your preferred languages are available 1 Press OPTIONS 2 Select Subtitle language and select a language you want temporarily and press OK Subtitles for analogue channels For analogue channels you need to make the subtitles available for each channel manually 1 Switch to a channel and press TEXT to open Text 2 Enter the page number for subtitles usually 888 3 Press TEXT again to close Text If you select On in the Subtitle menu when watching this analogue channel subtitles will be shown if available To know if a channel is analogue or digital switch to the channel and open Status in the Options menu Audio languages Digital TV channels can broadcast audio with several spoken languages for a programme You can set a preferred primary and secondary audio language If audio in one of these languages is available the TV will switch to this audio If none of the preferred audio languages is available you can select another audio language which is available To set the primary and secondary audio language 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 26 2 Select Channel settings and select Languages gt Primary audio language or Secondary audio langu
103. nd DVB C for your country you have selected one or the other during the channel installation If you want to change the DVB setting to start a new channel installation 29 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings and press OK 3 Select Channel installation Antenna connection gt Antenna DVB T or Cable DVB C and press OK 4 Select the DVB setting you want 5 Press 5 repeatedly if necessary to close the menu DVB C channel installation For ease of use all DVB C settings are set to automatic If your DVB C provider gave you specific DVB C values the network ID or network frequency enter these values when the TV asks for them during installation It might be necessary to adjust the scanning full or quick scan or enter a specific symbol rate in the Settings menu while installing To set a Symbol rate first set the Symbol rate to Manual Channel number conflicts In some countries different TV channels broadcasters might have the same channel number While installing the TV shows the list with channel number conflicts You need to select which TV channel you want to install on a channel number with multiple TV channels DVB T DVB C If you can use a DVB T antenna input but also a DVB C input you can set up your TV for both DVB T and DVB C Install one system follow
104. nd press OK The TV will ask you to quit Skype or to use Skype with another Skype account 14 11 Quit Skype When you sign out of Skype the Skype application on TV is still active Another Skype account can sign in or you can create a new account To stop the Skype application on TV you must quit Skype 14 12 Terms of use amp Privacy Policy Read the Terms of Use of Skype at www skype com go tou Also read the Privacy Policy at www skype com go privacy Smart TV 15 1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television You can make a wired connection to your router or you can link up wirelessly with Wi Fi With the TV connected to your home network a smartphone can show a photo on TV you can play videos stored on your computer or control the TV with your tablet With your TV connected to the Internet you can watch a rental video from an online video store read the online TV guide The Smart TV Apps add to the fun with all sorts of entertainment and convenient services 15 2 What you need To enjoy Smart TV Apps you must connect the TV to a router with a high speed broadband connection to the Internet You can use a home network connected to the Internet You do not need a computer Tip To enter text or to navigate an Internet page more easily you can consider to connect a USB keyboard and a USB mouse to the TV 15 3 Smart TV Apps
105. nel and switch back 27 About interactive TV With interactive TV some digital broadcasters combine their normal TV programme with information or entertainment pages Note You cannot download files to your TV with this feature Not all TV programmes commercials and features include closed captioning information You cannot respond to the digital content Visit the broadcaster s Internet website for more information 6 2 Channel installation Update channels Automatic update If you receive digital channels you can set the TV to automatically update the list with new channels Alternatively you can start a channel update yourself Automatic channel update Once a day at 6 AM the TV updates the channels and stores new channels New channels are stored in the All channels list but also in the New channels list Empty channels are removed If new channels are found or if channels are updated or removed a message is shown at TV start up The TV must be in standby to automatically update channels To switch off the message at start up 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings and press OK 3 Select Channel installation Channel update message gt Off To switch off the Automatic channel update 1 Professional Mode Off Press and select Setup and press OK Prof
106. nels If you know your cable provider is not offering digital channels you can skip searching for digital channels Select Off Analogue channels If you know your cable provider is not offering analogue channels you can skip searching for analogue channels Select Off Free Scrambled If you have a subscription and a CAM Conditional Access Module for pay TV services select Free scrambled If you did not subscribe to pay TV channels or services you can select Free channels only Reception quality If you receive digital channels you can check the quality and signal strength of a channel If you have your own antenna you can reposition the antenna to try and improve the reception To check the reception quality of a digital channel 1 Tune to the channel 2 Press and select Setup and press OK 3 Select Channel settings Channel installation Digital reception test and press OK The digital frequency is shown for this channel If the reception is poor you can reposition your antenna To check the signal quality of this frequency again select Search and press OK To enter a specific digital frequency yourself use the remote control digit keys Alternatively select the frequency position the arrows on a number with and p and change the number with A and w To check the frequency select Search and press OK If you use DVB C to receive channels the option Symbol rate mode is available
107. ng To level the difference in volume 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound Advanced Audio out levelling 3 Ifthe volume difference is large select More If the volume difference is small select Less 4 Press repeatedly if necessary to close the menu Audio Out levelling affects both the Audio Out Optical and HDMI ARC sound signals Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer the sound from your Home Theatre System might be distorted This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing You can fix this by setting the Audio out format of the TV to Stereo 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Setup TV settings gt Sound Advanced gt Audio out format No sound If you cannot hear the sound from the TV on your Home Theatre System check the following Check if you connected the HDMI cable to an HDMI ARC connection on the Home Theatre System All HDMI connections on the TV are HDMI ARC connections Check if the HDMI ARC setting on the TV is switched On Professional Mode Off Press and select Setup an
108. nna connection for DVB T and DVB C input signals E 2 Connections 2 1 Tips on connections Antenna If you have a Set top box a digital receiver or Recorder connect the antenna cables to run the antenna signal through the Set top box and or Recorder first before it enters the TV In this way the antenna and the Set top box can send possible additional channels to the Recorder to record e Digital Receiver Recorder e Bi m o m o EX xU EF UU HDMI HDMI CEC An HDMI connection has the best picture and sound quality One HDMI cable combines video and audio signals Use an HDMI cable for High Definition HD or Ultra HD UHD TV signals For best signal quality transfer use a High speed HDMI cable and do not use an HDMI cable longer than 5 m EasyLink HDMI CEC If your devices are connected with HDMI and have EasyLink you can operate them with the TV remote control EasyLink HDMI CEC must be switched On on the TV and the connected device DVI to HDMI Use a DVI to HDMI adapter if your device only has a DVI connection Use one of the HDMI connections and add an Audio L R cable mini jack 3 5mm to AUDIO IN for sound on the back of the TV Copy protection DVI and HDMI cables support HDCP High bandwidth Digital Content Protection HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu ray Disc Also referred to as DRM Digital Rights Management
109. nu Brightness With Brightness you can set the level of brightness of the picture signal Brightness is a setting intended for expert users We recommend non expert users to adjust the brightness of the picture with the Contrast setting To adjust the level 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced gt Contrast gt Brightness 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Video contrast With Video contrast you can decrease the range of the video contrast Video contrast is the setting intended for expert users To adjust the level 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced gt Contrast Video contrast 3 Press p right and adjust the value with A up or w down 4 Press repeatedly if necessary to close the menu Light sensor The Light sensor adjusts the picture automatically to the lighting conditions of the room You can switch Light sensor on or off To switch on or off 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Pic
110. o change products at any time without being obliged to adjust earlier supplies accordingly The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website are believed to be adequate for the intended use of the system The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained TP Vision Europe B V warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied TP Vision Europe B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips TV Customer Care for service or repairs Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void
111. o display the welcome message Welcome logo Display logo Enable or disable the welcome logo that appears when the TV starts USB to TV Load the welcome message from USB to TV Smartinfo Settings SmartlInfo This sets the way the Smartlnfo is shown USB to TV Load the information for Smartinfo from USB to TV Control settings Local KB lock Select On to lock all TV buttons except Select Off or All to unlock or lock all buttons respectively RC lock Select On to disable all buttons on the remote control Note that you can still enter the professional setup menu by pressing 3 1 9 7 5 3 x OSD display Enable or disable on screen information High security Select On to restrict access to the professional setup menu Auto scart Enable or disable the auto SCART feature this feature allows a connected SCART device to turn the TV on or off USB break in Enable or disable access to various USB features Enable USB Enable or disable access to a connected USB storage device SXP BaudRate Select a baud rate value 38400 or 19200 Enable teletext Enable or disable access to Teletext Enable MHEG Enable or disable access to MHEG channels Applicable to UK only Enable EPG Enable or disable access to the Electronic Programme Guide Enable subtitle Enable or disable subtitles Enable subtitle Enable or disable subtitles Subtitle On Startup Enable or disabl
112. of the Microsoft Windows NTFS file system with read write support NTFS 3G often uses the FUSE file system interface so it can run unmodified on many different operating systems It is runnable on Linux FreeBSD NetBSD OpenSolaris BeOS QNX WinCE Nucleus VxWorks Haiku MorphOS and Mac OS X It is licensed under either the GNU General Public License or a proprietary license It is a partial fork of ntfsprogs and is under active maintenance and development This piece of software is made available under the terms and conditions of the NTFS 3G Read Write Driver license which can be found below Source http www tuxera com WPA Supplicant 0 5 10 amp O 6 7 These packages are used to provide WiFi access The supplier for these tools is Atheros These pieces of software are made available under the terms and conditions of the GPL v2 license which can be found below This piece of software is made available under the terms and conditions of the WPA Supplicant license which can be found below Source http hostap epitest fi wpa supplicant ntfsprogs 2 0 0 Some useful tool for ntfs file sytem This piece of software is made available under the terms and conditions of the ntfsprogs license which can be found below Source http sourceforge net projects linux ntfs fuse 2 8 4 Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel This piece of software is made avail
113. ogue channels select Alternate audio Press OK to confirm your selection 3 Select from the available languages then press OK Note If you have selected Alternate audio for analogue channels select between Main Primary audio language or SAP Secondary audio language Subtitles and languages Subtitles Switch subtitles on To open the Subtitle menu press SUBTITLE You can set subtitles to On Off or Automatic To show subtitles when the broadcasted programme is not in your language the language you set for the TV select Automatic Also this setting will show subtitles when you mute the sound with For analogue channels subtitles must be made available in Text Tes sw SUBTITLE 0 Subtitles for digital channels There is no need to set subtitles in Text for digital channels Digital channels can offer several subtitle languages for a programme You can set a preferred primary and secondary subtitle language If subtitles in one of these languages are available the TV will show them If none of the preferred subtitle languages are available you can select another subtitle language which is available To set the primary and secondary subtitle language 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Channel settings and select Languages gt Primary subtitles language or Secondary subtitles
114. ons 2 11 Camcorder HDMI For best quality use an HDMI cable to connect the camcorder to the TV UEM NNNM CVBS Audio L R Scart You can use an HDMI YPbPr or SCART connection to connect your camcorder If your camcorder only has Video CVBS and Audio L R output use a Video Audio L R to SCART adapter to connect to the SCART connection Note the CVBS to Scart Adaptor is not provided in the TV set ooo Video Audio L R oon a CVBS Audio LR Use a Video Audio L R cable to connect the camcorder to the TV ooo ooo Ql mm Y shares the same jack with CVBS Component and Composite share audio jacks 2 12 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor With HDMI Use an HDMI cable to connect the computer to the TV UEM NEM With DVI to HDMI Alternatively you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L R cable mini jack 3 5mm to AUDIO IN L R on the back of the TV 5 E UEM NEM 243 Headphones You can connect a set of headphones to the 7 connection on the TV The connection is a mini jack 3 5mm You can adjust the volume of the headphones separately To adjust the volume 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Sound gt Headphones volum
115. org uriparser 0 7 7 For MPEG DASH Source http uriparser sourceforge net xerces ct 3 1 1 For MPEG DASH Source http xerces apache org webp 0 2 1 For Netflix Source https code google com p webp weet 1 10 2 GNU Weet is a free software package for retrieving files using HTTP HTTPS and FTP the most widely used Internet protocols It is anon interactive commandline tool so it may easily be called from scripts cron jobs terminals without X Windows support etc Source http ftp gnu org gnu wget wget 1 10 2 tar gz wireless tools 0 29 The Wireless Tools WT is a set of tools allowing to manipulate the Wireless Extensions They use a textual interface and are rather crude but aim to support the full Wireless Extension Source http www hpl hp com personal Jean Tourri Ihes Linux Tools html ezxml 0 8 6 ezXML is a C library for parsing XML documents Used inside Philips libraries Source http sourceforge net projects ezxml 67 SQLite 3 7 7 1 SQLite is a in process library that implements a self contained serverless zero configuration transactional SQL database engine Source http www sqalite org download html AES aes src 29 04 09 zip Advanced Encryption Standard AES is a specification for the encryption of electronic data Used inside Philips libraries Source http gladman plushost co uk oldsite AES microhttpd libmicrohttpd O 9 9 tar gz GNU libmicrohttpd i
116. ountry where you install the TV 4 Select Antenna DVB T or Cable DVB C The channel search may take a few minutes Follow the instructions on screen Full installation To redo a full TV installation 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Reinstall TV and press OK The installation may take a few minutes Follow the instructions on screen Factory settings 28 Factory settings sets the TV back to the original TV settings for picture and sound To switch back to the original Factory settings 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings General settings Factory settings and press OK 3 Press OK to confirm 4 Press repeatedly if necessary to close the menu Channel list copy Introduction Channel list copy is intended for dealers and expert users In some countries Channel list copy is only available for copying satellite channels With Channel list copy you can copy the channels installed on one TV onto another Philips TV of the same range With Channel list copy you avoid the time consuming channel search by uploading a predefined channel list on a TV Use a USB flash drive of minimum 1 GB Conditions Both TVs are from the same ye
117. our local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health 16 2 Reception Aerial input 75 ohm coaxial IEC75 Tuner bands Hyperband S Channel UHF VHF DVB For models xxHFL5010 DVB T2 DVB T DVB C Analogue video playback NTSC SECAM PAL Digital video playback MPEG2 SD HD ISO IEC 13818 2 MPEG4 SD HD ISO IEC 14496 10 Digital audio playback ISO IEC 13818 3 Note See selected countries on the TV type plate 16 3 Display Type Diagonal screen size 70 cm 28 inch 80 cm 32 inch 100 cm 40 inch 121 cm 48 inch 139 cm 55 inch Display resolution 1920x1080p 32HFL5010 40HFL5010 48HFL5010 55HFL5010 Display resolution 1365x7689 28HFL5010 Input resolution for HD FHD TVs Video formats Resolution Refresh rate 480i 60 Hz lt 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50 Hz 60 Hz 1080i 50 Hz 60 Hz 1080p 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz Comput
118. ow the channel logos If you do not want these logos to appear you can switch them off To switch off Channel logos 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings General settings gt Channel logos and press OK 3 Select Off and press OK 4 Press 5 repeatedly if necessary to close the menu Rename channels You can rename channels in the channel list 1 Select the channel you want to rename in one of the channel lists 2 Select the channel to rename 3 Press e You can enter text with the remote control keyboard or open the on screen keyboard With the on screen keyboard To open the on screen keyboard place the cursor in the name text field and press OK To delete the character in front of the cursor press Backspace To enter a character select the character with the arrow keys and press OK To select uppercase characters press e To select numbers or special characters press When you are ready press 5 to close the on screen keyboard To finish renaming select Done and press OK Lock a channel To prevent children from watching a channel or a programme you can lock channels or lock age rated programmes Lock a channel You can lock a channel to prevent children from watching it To watch a locked channel you need to enter the Child lock code You cannot
119. plugs Loose power plugs can cause arcing or fire Ensure that no strain is exerted on the power cord when you swivel the TV screen To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times 72 Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs If you mount the TV on a stand only use the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the weight of the TV and the stand When wall mounted ensure that the wall mount can safely bear the weight of the TV set TP Vision bears no responsibility for improper wall mounting that results in accident injury or damage Parts of this product are made of glass Handle with care to avoid injury or damage Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensur
120. rast Gamma 36 Contrast Light sensor 36 Contrast Video contrast 36 D Digital Text 24 77 Disposal of TV or batteries 59 DVB Digital Video Broadcast 29 DVB settings 30 DVI connect 5 E EasyLink 6 EasyLink connection 5 EasyLink settings 7 Eco settings 59 End of use 59 ESD 61 European Energy Label 59 F Facebook 57 Favourite channel list 22 Frequency scan 30 Frequency step size 30 G Game console connect 10 Game or computer 37 Gamma 36 H HbbTV 27 HDCP copy protection 5 HDMI ARC 5 HDMI CEC 6 HDMI connection tips 5 Headphones 12 Headphones volume 38 Hearing impaired 39 Home Theatre System connect 8 Home Theatre System multichannel 9 Home Theatre System problems 10 Home Theatre System volume leveling 9 ncredible surround 38 nteractive TV about 26 nteractive TV what you need 27 nternet memory clear 46 iTV 26 L Language audio 26 Language menus and messages 26 Language original 26 Light sensor 36 Location 37 M Manual installation 31 Media servers supported 61 Menu language 26 Miracast block unblock 49 Miracast share a screen 49 Miracast stop sharing 49 Miracast 48 MPEG artefact reduction 36 Music playback 47 Z etwork frequency 30 etwork frequency mode 30 etwork router 44 etwork DHCP 44 etwork password 44 etwork problems 45 etwork settings 46 etwork Static IP 44 etwork wired 45 etwork wireless
121. re settings for watching TV 4 Press 5 repeatedly if necessary to close the menu Location If the TV is located in a shop you can set the TV to display an in store promotion banner The Picture style is set to Vivid automatically The automatic Switch off timer is switched off To set the TV to Shop location 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Location and press OK 3 Select Shop and press OK 4 Press repeatedly if necessary to close the menu 8 3 Sound Sound style For easy sound adjustment you can select a preset setting with Sound style 1 While watching a TV channel press OPTIONS to open the Options menu 2 Select Picture and sound in the menu bar and select Sound style 3 Select a Sound style and press OK The different Sound styles are Personal Your personal choices made in Personalise picture and sound Original Factory standard 37 News Ideal for speech Movie Ideal for watching movies Game Ideal for gaming Music Ideal for listening to music Adjust a Sound style You can adjust a Sound style 1 Select the style and press OK 2 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 3 Select TV settings navigate to the ind
122. rent password Press OK first if you want to use the on screen keyboard 5 Press w down to select New password and enter you new password 6 Press w down again to select Repeat new password and re enter the new password 7 Press w down again to select Apply to send the new password for confirmation Video You can set Skype to restrict the use of video in Skype calls With Automatically receive video from you can set Skype to automatically receive and show video from Anyone People in my contact list only or from No one With Show that I have video to you can set Skype to send out your video to People in my contact list only 55 or to No one To set the Video settings 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Select Video 4 Press p right to select the radio buttons and press OK to mark or unmark Privacy You can set Skype to restrict incoming Skype calls You can allow calls from Anyone or from From people in my contact list only To set the Privacy settings 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3 Select Privacy 4 Press p right to select the radio buttons and press OK to mark or unmark Blocked contacts You can view a list of all your Blocked contacts To view the list 1 Sign in to Skype with your account 2 Inthe Skype menu select Settings and press OK 3
123. ress p right and select Onor Off 4 Press repeatedly if necessary to close the menu HDMI ARC If you do not need an Audio Return Channel ARC on any of the HDMI connections you can switch the ARC signal off Audio Out format With Audio Out format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System Audio Out levelling With Audio Out leveling you can level the sound volume of the Home Theatre System with the volume of the TV when you switch over from one to another Audio Out delay If you set an Audio sync delay on your Home Theatre System to synchronise the sound with the picture you must switch off Audio Out delay on the TV Audio Out offset If you cannot set a delay on the Home Theatre System you can set a delay on the TV with Audio Out offset TV placement As part of the first installation this setting is set to either On a TV stand or Wall mounted If you have changed the placement of the TV since then adjust this setting accordingly for best sound reproduction 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt TV placement and press OK 3 Select On a TV stand or Wall mounted and press OK 4 Press repeatedly if necessary to close the menu 8 4 Universal access Switch on With
124. rg software bash coreutils 6 9 The GNU Core Utilities are the basic file shell and text manipulation utilities of the GNU operating system These are the core utilities which are expected to exist on every operating system Source http www gnu org software coreutils findutils 4 2 31 The GNU Find Utilities are the basic directory searching utilities of the GNU operating system These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands Source http www gnu org software findutils gawk 3 1 5 If you are like many computer users you would frequently like to make changes in various text files wherever certain patterns appear or extract data from parts of certain lines while discarding the rest To write a program to do this in a language such as C or Pascal is a time consuming inconvenience that may take many lines of code The job is easy with awk especially the GNU implementation gawk Source http www gnu org software gawk grep 2 5 1a The grep command searches one or more input files for lines containing a match to a specified pattern By default grep prints the matching lines Source http www gnu org software grep gzip 1 3 12 GNU Gzip is a popular data compression program originally written by Jean loup Gailly for the GNU project Mark Adler wrote the decompression part Source http
125. riptive audio or Subtitles and press OK 4 Press repeatedly if necessary to close the menu Key beep Key beep gives an audio feedback each time you press a key on the remote control The volume of the beep is fixed To switch on Key beep 1 Press OPTIONS select Universal access and press OK 2 Select Key beep and select On If Universal access does not appear in the Options menu switch on Universal access in Setup 40 TV guide What you need With the TV guide you can view a list of the current and scheduled TV programmes of your channels Depending on where the TV guide information data is coming from analogue and digital channels or only digital channels are shown Not all channels offer TV guide information The TV can collect TV guide information for the channels that are installed on the TV e g the channels you watch with Watch TV The TV cannot collect the TV guide information for channels viewed from a digital receiver 9 2 Using the TV guide Open the TV guide To open the TV guide press GUIDE Press zs GUIDE again to close The first time you open the TV guide the TV scans all TV channels for programme information This may take several minutes TV guide data is stored in the TV Tune to a programme Switch to a programme From the TV guide you can switch to a current programme To select a programme use the arrow keys to highlight the programme name
126. rly integration in its products 20 2 Copyrights and licenses HDMI HDMI The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Dolby Dolby Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DTS 2 0 Digital Out DTS 2 0 Digital Out Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 and other U S and worldwide patents issued and pending DTS the Symbol and DTS and the Symbol together are registered trademarks and DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved Skype SKYPE Skype 2013 Skype and or Microsoft The Skype name associated trade marks and logos and the S logo are trade marks of Skype or related entities Skype is a trademark of Skype or its related companies Although this product has been tested and met our certification standards for audio and video quality it is not endorsed by Skype Skype Communications S a r l or any of their related companies DLNA Certified 2013 Digital Living Network Alliance All rights reserved 2013 DLNA All rights reserved Java Java and all Java based trademarks are registered 75 trademarks of Oracle and or
127. roblems 70 Standby 16 Subtitles 25 Support online 70 Surround mode 38 Switch off timer 43 Switching on 16 Symbol rate 30 Symbol rate mode 30 Synchronise audio and video 9 T Teletext 24 Text 24 Treble 37 TV clock 43 TV guide 41 TV guide clock 43 TV network name 46 TV on Demand 58 TV placement 3 TV placement 39 TV speakers 38 Twitter 57 U Universal access 39 Universal access audio effect 40 Universal access hearing impaired 39 Universal access mixed volume 40 Universal access Speakers Headphones 39 Universal access speech 40 USB flash drive connect 11 V Video selection 24 Videos playback 48 Viewing distance 3 Visually impaired 39 W Watch TV 22 Wi Fi 44 Wi Fi Certified Miracast 48 Wired network 45 Wireless installation 44 Word mark brightness 16 World Wide Web 57 WPS PIN code 44 WPS Wi Fi Protected Setup 44 NNNNNNNNNYN 78 Y Ys PbPr connection tips 5 79 Contact information Albania Hungary Magyarorsz g Serbia Srbija 355 4 365 314 068 001 85 44 00381 114 440 841 00381 113 442 114 Armenia Republic of Ireland Poblacht 374 1 522 278 nah ireann Slovakia Slovensko z 01 601 11 161 0800 0045 51 Austria Osterreich 0150 2842133 Northern Ireland Tuaisceart Slovenia Eireann 0800 80 255 Belarus Beaapycb 01 601 11 161 375 2 841 118 ASTline Spain Espafia 375 1 721 056 78 CTI Italy Italia 915 909 335 02 4528 7030 Belg
128. s Some examples are Anynet Aquos Link Bravia Theatre Sync Kuro Link Simplink and Viera Link Not all brands are fully compatible with EasyLink Example HDMI CEC branding names are property of their respective owners Operate devices To operate a device connected to HDMI and set up with EasyLink select the device or its activity in the list of TV connections Press SOURCE select a device connected to an HDMI connection and press OK Once the device is selected the TV remote control can control the device However and OPTIONS keys and some other TV keys are not forwarded to the device If the key you need is not on the TV remote control you can select the key in the Options menu Press OPTIONS and select Controls in the menu bar On the screen select the device key you need and press OK Some very specific device keys might not be available in the Controls menu Note Only devices that support EasyLink remote control function will respond to the TV remote control EasyLink settings The TV comes with all EasyLink settings switched on You can switch off any EasyLink setting independently EasyLink To switch off EasyLink completely 1 Professional Mode Off 2 Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt EasyLink and press OK 3 Select Off and press OK 4 Press repeatedly if ne
129. s PSmisc package is a set of some small useful utilities that use the proc filesystem We re not about changing the world but providing the system administrator with some help in common tasks Source http psmisc sourceforge net sed 4 1 5 sed stream editor isn t an interactive text editor Instead it is used to filter text i e it takes text input performs some operation or set of operations on it and outputs the modified text sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file Source http www gnu org software sed tar 1 17 GNU Tar provides the ability to create tar archives as well as various other kinds of manipulation For example you can use Tar on previously created archives to extract files to store additional files or to update or list files which were already stored Source http www gnu org software tar util linux ng 2 18 Various system utilities Source http userweb kerneLorg Nkzak util linux ng udhcpc 0 9 8cvs20050303 3 Udhcpc is a very small DHCP client geared towards embedded systems Source http udhcp sourcearchive com downloads 0 9 8cvs20050303 3 Libxml2 2 7 8 The libxml2 library is used in AstroTV as a support for the execution of NCL application This library was developed for the GNOME software suite and is available under a MIT license Source http www xmlsoft
130. s a small C library that is supposed to make it easy to run an HTTP server as part of another application The original download site for this software is http www gnu org software libmicrohttpd This piece of software is made available under the terms and conditions of the LGPL v2 1 license Source http ftp gnu org gnu libmicrohttpd libmicro httpd O 9 9 tar gz yajl lloyd yajl 2 0 1 O gf4b2b1a tar gz YAJL is a small event driven SAX style JSON parser written in ANSI C and a small validating JSON generator YAJL is released under the ISC license The original download site for this software is http lloyd github com yajl This piece of software is made available under the terms and conditions of the ISC license Source http okgs fedoraproject org repo pkgs yajl lloyd yajl 2 0 1 O gf4b2b1a tar gz df6a751e7797b9c21 82efd91b5d64017 lloyd yajl 2 0 1 O gf4b2bla tar gz HMAC SHAI 0 1 keyed hash message authentication code HMAC is a specific construction for calculating a message authentication code MAC involving a cryptographic hash function in combination with a secret cryptographic key As with any MAC it may be used to simultaneously verify both the data integrity and the authentication of a message Any cryptographic hash function such as MD5 or SHA 1 may be used in the calculation of an HMAC the resulting MAC algorithm is termed HMAC MD5 or HMAC SHAI accordingly Source http www deadhat com wlancrypto
131. select Setup and press OK 2 Select Update software gt TV with Internet then press OK Follow the instructions on screen When the update is complete the TV switches off and back on again automatically Wait for the TV to switch itself back on Do not press the Power switch 5 on the TV 17 2 Software version To view the current TV software version 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select Software settings and press OK 3 Select Current software info and see Release Version 4 Press 5 repeatedly if necessary to close the menu 17 3 Open source software This television contains open source software TP Vision Europe B V hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain the source code please write in English to Intellectual Property Dept TP Vision Europe B V Prins Bernhardplein 200 1097 JB Amsterdam The Netherlands 17 4 Open source license Acknowledgements and License Texts for any open source software used in this Philips TV This is a document describing the distribution of the source code used on the P
132. select Sign in and press OK You are signed in if the Skype menu opens on screen Need help If you have forgotten your Skype Name or password or are having problems signing in please visit www skype com support New Skype account If you don t have a Skype Name and Password yet you can create a new Skype account on your computer Once you have successfully created the new account you can use your Skype Name and password to sign in on TV To create a Skype account on your computer go to www skype com If you have a remote control with an integrated keyboard or have a USB keyboard connected to the TV you can create a new Skype account on your TV To create anew account on your TV 1 On the Skype Sign in page select Create a new account and press OK 2 Onthe next menu select Open browser and press OK 3 The TV opens the web page of www skype com directly You can create your new account on this web page 4 When Skype confirms that your new account is successfully created leave the web browser and go back to the Sign in page of Skype on TV 5 Enter your Skype name and Password to sign in Skype Name A Skype Name must begin with a letter upper or lowercase It must have 6 to 32 characters and can contain numbers A Skype Name cannot contain a space Password Your password must have 6 to 20 characters and must at least contain one letter or one number It cannot contain special characters like
133. series User Manual 28HFL5O10T 32HFL5010T AOHFL5010T 48HFL5010T 55HFL5010T PHILIPS Contents 1 Setting up 3 11 Read safety 3 1 2 TV stand and wall mounting 3 13 Tips on placement 3 14 Power cable 3 15 Antenna cable 4 2 Connections 5 2 1 Tips on connections 5 2 2 EasyLink HDMI CEC 6 2 3 Common interface CAM 7 2 4 Set top box STB 8 2 5 Home Theatre System HTS 8 2 6 Blu ray Disc player 10 2 7 DVD player 10 2 8 Game console 10 2 9 USB flash drive 11 2 10 Photo camera 11 2 41 Camcorder 11 2 12 Computer 12 2 3 Headphones 12 3 Remote control 14 3 1 Key overview 14 3 2 IR sensor 15 3 3 Batteries 15 3 4 Cleaning 15 4 Switch on 16 4 1 On or Standby 16 4 2 Keyson TV 16 4 3 Word mark brightness 16 5 Professional mode 17 5 1 What you can do 17 5 2 Enter Professional Home Menu 17 5 3 Enable Professional Home Menu 17 5 4 Professional settings menu 17 5 5 MyChoice setup 20 5 6 Combine channel list 21 5 7 Smart TV Settings 21 6 TV channels 22 6 1 Watching TV channels 22 6 2 Channel installation 27 7 Home menu 32 8 Settings 33 8 1 Setup menu 33 8 2 Picture 33 8 3 Sound 37 8 4 Universal access 39 9 TV guide 41 9 1 What you need 41 9 2 Using the TV guide 41 10 Sources 42 10 1 Sources list 42 10 2 From standby 42 10 3 EasyLink 42 11 Timers and clock 43 11 1 Sleeptimer 43 11 2 Clock 43 1 3 Switch off timer 43 1 4 Alarm 43 12 Network
134. showing the Philips startup screen When the TV is in standby a Philips startup screen is 69 disolayed then the TV returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or the TV The standby light keeps on blinking Disconnect the power cable from the power outlet Wait 5 minutes before you reconnect the power cable If the blinking reoccurs contact Philips TV Consumer Care Wrong menu language Change the language back to your language 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Menu language and press OK 3 Select the language you want and press OK 4 Press repeatedly if necessary to close the menu Picture No picture distorted picture Make sure that the antenna is properly connected to the TV Make sure that the correct device is selected as the display source Make sure that the external device or source is properly connected Sound but no picture Make sure that the picture settings are set correctly Poor antenna reception Make sure that the antenna is properly connected to the TV Loud speakers unearthed audio devices neon lights high buildings and other large objects
135. ss network does not work properly in your home try the wired network installation Internet does not work If the connection to the router is OK check the router connection to the Internet The PC and Internet connection are slow Look in your wireless router s user manual for information on indoor range transfer rate and other factors of signal quality Use a high speed broadband Internet connection for your router 12 3 Wired network What you need You need a network router to connect the TV to the Internet Use a router with a high speed broadband connection to the Internet 45 File sharing On this TV you can open photos music and videos stored on your computer Use a recent version of media server software like Philips MediaManager Windows Media Player 11 Twonky or similar Install the media server software on your computer and set it up to share your media files with the TV Read the manual of the media server software for more information This software must be running on your computer to view or play your files on TV You can download the Philips MediaManager software from the Philips support site www philips com support Connect the router To connect and setup the router follow steps 1 to 5 1 Connect the router to the TV with a network cable Ethernet cable 2 Make sure that the router is switched on 3 Professional Mode Off Press and select Setup and press
136. t General settings gt Clock gt Auto clock mode a nd select Manual 3 Select Day and Time to adjust 43 4 Press repeatedly if necessary to close the menu 11 3 Switch off timer If you do not press a key on the remote control during a 4 hour period or if the TV receives no input signal nor remote control commands for 10 minutes the TV switches off automatically to save energy If you use the TV as a monitor or use a digital receiver to watch TV a Set top box STB and you do not use the remote control of the TV you should deactivate the automatic switch off To deactivate the Switch off timer 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Switch off timer and set the slider bar to Off 3 Press repeatedly if necessary to close the menu 11 4 Alarm Only available if Professional Mode On An alarm can be set on the TV The TV can wakeup on a defined alarm time To set the alarm follow following steps 1 Press 4 and select Guest menu and press OK 2 Select Alarm To set the alarm select On 3 Select Alarm time and press OK The time can be changed by A or w Select On to program the alarm time that has been set 4 A Wakeup volume can be set Adjust the slider bar to set the desired volume level 5 A Wakeup tune can be selected There are 4 predefine
137. t or to show content via App Control App Control ID To provide the ID number for App Control Profile Name To provide the name of the profile to be used for this TV Manage Profiles This will bring you to the page for changing SmartTV settings 21 TV channels 6 1 Watching TV channels Switch channels To watch TV channels press TV The TV tunes to the TV channel you last watched Alternatively press to open the Home menu and select Watch TV and press OK To switch channels press CH or CH If you know the channel number type in the number with the number keys Press OK after you entered the number to switch channels To switch back to the previously tuned channel press gt To switch to a channel from a channel list While watching a TV channel press CHANNEL GRID to open the channel grid The channel grid can have several pages with channels To view the next or previous page press CH or CH To close the channel lists without switching channels press CHANNEL GRID again Radio channels If digital broadcasting is available digital radio stations are installed during installation Switch to a radio channel just like you switch to a TV channel 22 Channel list Favourite channels You can create a favourite channel list that only holds the channels you want to watch With the Favourite channel list selected you will only see your favourite channels when you switch
138. th Cl you can watch premium HD programmes like movies and sports offered by digital TV broadcasters in your region These programmes are scrambled by the TV broadcaster and descrambled with a prepaid Cl module Digital TV broadcasters provide this Cl module Conditional Access Module CAM when you subscribe to their premium programmes These programmes have a high level of copy protection Contact a digital TV broadcaster for more information on terms amp conditions CI CAM Insert a CAM module Switch off the TV before inserting a CAM Look on the CAM for the correct method of insertion Incorrect insertion can damage the CAM and TV Use the Common Interface slot on the TV to insert the CAM card With the front of the card facing towards you gently insert the CAM as far as it will go Leave the card in the slot permanently It may take a few minutes before the CAM is activated Removing the CAM will deactivate the broadcast service on TV If a CAM is inserted and subscription fees are paid connection methods can differ you can watch the TV broadcast The inserted CAM is exclusively for your TV CAM settings To set passwords or PIN codes for the CAM TV broadcast press and select Setup and press OK Select Channel settings Common Interface Select the CAM TV broadcaster and press OK 2 4 Set top box STB Use 2 antenna cables to connect the antenna to the Set top box a digital receiver
139. through channels Create your favourite channel list 1 Professional Mode Off While watching a TV channel press CHANNEL GRID to open the channel list Professional Mode On In the Professional Home Menu select Professional Settings menu and press OK Select Professional settings Channel setup and press OK 2 Select All to view all channels 3 Select the channel and press to mark as favourite 4 The selected channel is marked witha fr 5 To finish press The channels are added to the Favourites list To remove a channel from the favourites list select the channel with wy then press again to unmark as favourite Reorder You can reorder reposition channels in the Favourite channel list 1 In the channel list Favourites highlight the channel you want to reposition 2 Press am 3 Select the channel to reorder and press OK 4 Press the Navigation buttons to move the highlighted channel to another location and press OK 5 Once complete press 9 to exit from the Favourite channel list You can highlight another channel and do the same Channel list views In the channel lists you can find all installed TV and radio channels Next to the channel list All which holds all installed channels you can set up a list of Favourites view the installed Radio stations separately or discover the newly added channels in New Channel logos In some countries the TV can sh
140. time To set the sleep timer 1 Press and select Setup and press OK Professional Mode Off Setup Professional Mode On Guest Menu 2 Select TV settings gt General settings gt Sleep timer Professional Mode Off TV settings General settings Professional Mode On Select Sleep timer With the slider bar you can set the time to up to 240 minutes in increments of 30 minutes If set to Off the sleep timer is switched off You can always switch off your TV earlier or reset the time during the countdown 3 Press 5 repeatedly if necessary to close the menu 11 2 Clock To know what time it is press CLOCK on the remote control In some countries digital broadcasts do not send UTC Coordinated Universal Time information The daylight saving change might be ignored and the TV might show an incorrect time To correct the TV clock 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt General settings gt Clock gt Auto clock mode a nd select Country dependent 3 Select Daylight saving and select the appropriate setting 4 Press repeatedly if necessary to close the menu To set the TV clock manually 1 Professional Mode Off Press and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings g
141. ture gt Advanced gt Contrast gt Light sensor 3 Press p right and select Onor Off 4 Press repeatedly if necessary to close the menu Only for TVs with light sensor function Gamma With Gamma you can set a non linear setting for picture luminance and contrast Gamma is a setting intended for expert users To adjust the level 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings Picture Advanced gt Contrast gt Gamma 3 Press p right and adjust the value with A up or w down 36 4 Press repeatedly if necessary to close the menu Sharpness settings Super resolution With Super resolution you switch on a superior sharpness in line edges and contours To switch on or off 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV settings gt Picture gt Advanced Sharpness gt Super resolution 3 Press p right and select Onor Off 4 Press repeatedly if necessary to close the menu Noise reduction With Noise reduction you can filter out and reduce the level of image noise To adjust the noise reduction 1 Professional Mode Off Press 4 and select Setup and press OK Professional Mode On Enter the Professional Home Menu 2 Select TV sett
142. ure format menu 2 Select a format from the list and press OK The following format can be available according the picture on screen Auto fill Auto zoom Super zoom Movie expand 16 9 Wide screen Unscaled 4 3 Text Teletext Text pages To open Text Teletext while you are watching TV channels press TEXT To close Text press TEXT again Select a Text page To selecta page 1 Enter the page number with the number keys 2 Use the arrow keys to navigate 3 Press a colour key to select a colour coded subject at the bottom of the screen Text sub pages A Text page number can hold several subpages The subpage numbers are shown on a bar next to the main page number To select a subpage press lt qor P T O P Text pages Some broadcasters offer T O P Text To open T O P Text pages within Text press OPTIONS and select T O P overview Text options In Text press OPTIONS to select the following Freeze page To stop the automatic rotation of subpages Dual screen Full screen To show the TV channel and Text alongside each other T O P overview To open T O P Text Enlarge To enlarge the Text page for comfortable reading Reveal To unhide hidden information on a page Cycle subpages To cycle subpages when these are available Language To switch the group of characters that Text uses to display correctly Text 2 5 To activate the Text
143. ws a message if any such TV channels are available Subtitles Switch Subtitles on or Subtitles off with this options Select Automatic to show subtitles only when the sound is muted with Subtitle language For digital broadcast you can select an available subtitle language temporarily if none of your preferred languages are available Audio languages For digital broadcast you can select an available audio language temporarily if none of your preferred languages are available Dual I II If an audio signal contains two audio languages but one language or both has no language indication this option is available Common interface If prepaid premium content is available from a CAM you can set the provider settings with this option HbbTV on this channel You can block the HbbTV pages from a channel that offers HbbTV MHP applications 24 Enable or disable the MHP applications Status Select Status to view technical information on the channel if it is analogue or digital or a connected device you are watching Share Enables the user to communicate his activity with his social networks such as Twitter or email For Smart TVs only Picture format If black bars appear on top and bottom or on both sides of the picture you can adjust the picture format to a format that fills the screen To change the picture format 1 While watching a TV channel press FORMAT to openthe Pict
144. www philips com

Philips 40HFL5010T/12 40" Full HD Smart TV Wi-Fi Black LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 40HFL5010T/12 40&quot; Full HD Smart TV Wi-Fi Black LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 40HFL5010T/12 40" Full HD Smart TV Wi-Fi Black LED TV