Home
        Electrolux Rex EGG9363NOX hob
         Contents
1.     1 2 Installation    WARNING   Only a qualified person must in   stall this appliance       Remove all the packaging      Do not install or use a damaged appli   ance      Obey the installation instruction sup   plied with the appliance      Keep the minimum distance from the  other appliances and units     ENGLISH 3      Always be careful when you move the  appliance because it is heavy  Always  wear safety gloves       Seal the cut surfaces with a sealant to  prevent moisture to cause swelling       Protect the bottom of the appliance  from steam and moisture       Do not install the appliance adjacent to  a door or under a window  This pre   vents hot cookware to fall from the ap   pliance when the door or the window is  opened        f the appliance is installed above draw   ers make sure that the space  between  the bottom of the appliance and the up   per drawer  is sufficient for air circula   tion       The bottom of the appliance can get  hot  We recommend to install a non   combustile separation panel under the  appliance to prevent access to the bot   tom     Electrical connection    WARNING   Risk of fire and electrical shock       All electrical connections must be made  by a qualified electrician       Before every wiring make sure the main  terminal of the appliance is not live       Make sure the appliance is installed  correctly  Loose and incorrect plug and  Socket can make the terminal become  too hot      Make sure that a shock protection is in   stalle
2.    Carry out connection by using metal rigid  pipes  copper with mechanical end      7 3 Injectors replacement    1  Remove the pan supports    2  Remove the caps and crowns of the  burner    3  With a socket spanner 7 remove the  injectors and replace them with the  ones which are necessary for the type    of gas you use  see table in  Techni   cal Information  chapter     4  Assemble the parts  follow the same  procedure backwards    5  Replace the rating plate  it is near the  gas supply pipe  with the one for the  new type of gas supply  You can find  this plate in the package supplied  with the appliance    If the supply gas pressure is changeable   or different from the necessary pressure    you must fit an applicable pressure ad   juster on the gas supply pipe     7 4 Adjustment of minimum level    To adjust the minimum level of the burn   ers     1  Light the burner     2  Turn the knob on the minimum posi   tion     3  Remove the knob     4  With a thin screwdriver  adjust the by   pass screw position     A CD                                  A  The by pass screw        f you change from natural gas G20 20  mbar to liquid gas  fully tighten the by   pass screw in          f you change from liquid gas to natural  gas G20 20 mbar  undo the by pass  screw approximately 1 4 of a turn  1 2  of a turn for Triple Crown burner         WARNING     Make sure the flame does not go  out when you quickly turn the  knob from the maximum position  to the minimum position     7 5 El
3.  Gas connection  G 1 2   Gas supply  G20  2H  20 mbar  Appliance class  3    14 www electrolux com                         By pass diameters   Burner          Burner By pass in  1 100 mm Rapid    Auxiliary 28 Triple Crown 56  Semi rapid 32  Gas burners  RE  NORMAL POWER  NOR   MAL DUCED NATURALGAS LPG  Butane Propane   power POW    G20  2H  20 G30 G31  3   28 30 37  ER  BURN  mbar mbar  ER       630         inj  inj  28 30 37  kW kW   1 100 m  h 1 100 mbar mbar  mm mm  g h g h  Auxiliary 1 0 0 33 70 0 095 50 13 71  Semi   rapid 2 0 0 45 96 0 190 71 145 143  Rapid 2 8 0 75 115 0 267 86 204 200  Triple  OI 4 0 1 4 146 0 381 98 291 286    9  ENVIRONMENT CONCERNS    Recycle the materials with the symbol  5      Put the packaging in applicable  containers to recycle it    Help protect the environment and human  health and to recycle waste of electrical    and electronic appliances  Do not dispose  appliances marked with the symbol     with the household waste  Return the  product to your local recycling facility or  contact your municipal office     ENGLISH 15    www electrolux com shop    356993602    172012               
4.  on the appli   ance     Cookware made of cast iron  aluminium  or with a damaged bottom can cause  scratches on the glass ceramic  Always  lift these objects up when you have to  move them on the cooking surface     Provide good ventilation in the room  where the appliance is installed     Make sure that the ventilation openings  are not blocked     Use only stable cookware with the cor   rect shape and diameter larger than the  dimensions of the burners  There is a  risk of overheating and rupture of the  glass plate  if applicable     Make sure the flame does not go out  when you quickly turn the knob from  the maximum to the minimum position   Make sure pots are centrally positioned  on the rings and do not stick out over  edges of the cooking surface    Use only the accessories supplied with  the appliance    Do not install a flame diffuser on the  burner        1 4 Care and Cleaning    WARNING   Risk of damage to the appliance     Clean regularly the appliance to prevent  the deterioration of the surface material     Do not use water spray and steam to  clean the appliance     Clean the appliance with a moist soft  cloth  Only use neutral detergents  Do  not use abrasive products  abrasive  cleaning pads  solvents or metal ob   jects     2  PRODUCT DESCRIPTION    2 1 Cooking surface layout    ENGLISH 5    1 5 Disposal    WARNING   Risk of injury or suffocation        Contact your municipal authority for in   formation on how to discard the appli   ance correctly     e D
5.  plug is    disposed of safely  A cut off plug  put into a 13 amp socket is a  safety hazard  There is a risk of  electrical shock                                A  supplied seal  B  supplied brackets    7 8 Possibilities for insertion    Kitchen unit with door    The panel installed below the hob must  be easy to remove and let an easy access  in case a technical assistance intervention    15 necessary              2         frui 20 mm   max 150 mm                              A  Removable panel  B  Space for connections    8  TECHNICAL INFORMATION    Hob dimensions  Width  894 mm    Length  510 mm       Hob recess dimensions                Width  830 mm  Length  480 mm  Heat input   Triple Crown 4 0 kW  burner    Rapid burner  2 8 kW  Semi rapid burn  2 0 kW  er    Auxiliary burner  1 0 kW    ENGLISH 13  Kitchen unit with oven    The hob recess dimensions must obey  the indication and the kitchen unit must  be equipped with vents to let a continu   ous supply of air  The electrical connec   tion of the hob and the oven must be in   stalled separately for safety reasons and  to let easy remove oven from the unit              gt     A A  50 cm2 120 cm2                 lt     PZ  360 cm2 80 cm2                   TOTAL POWER  0920  2H  20 mbar    12 8 kW  G30  3   28 30  mbar   931 g h  G31  3   37 mbar      914             230 V   50 Hz  supply  3 core  flexible cable with  non rewireable  plug fitted with a  3 amp cartridge    Electric supply           fuse  Category  II2H3  
6.  the burner                                   N    91                                                                        e Be very careful when you replace  the pan supports to prevent the hob  top from damage     After cleaning  dry the appliance with a  soft cloth        8  www electrolux com    The stainless steel can become tarnished  if it is too much heated  Refer to this you  must not cook with potstones  earthen   ware pans or cast iron plates  Do not use  aluminium foil to prevent damage the top  during operation     Removing the dirt     1      Remove immediately  melting  plastic  plastic foil  and food con   taining sugar        Stop the appliance and let it  cool down before you clean  lime   scale rings  water rings  fat stains   shiny metallic discolorations  Use a  special cleaner applicable for sur   face of hob     2  Clean the appliance with a damp  cloth and some detergent     6  TROUBLESHOOTING    Problem    There is no spark when    lighting the gas supply    Possible cause    3  Atthe end rub the appliance dry  with a clean cloth     5 1 Cleaning of the spark plug    This feature is obtained through a ceramic  ignition candle with a metal electrode   Keep these components well clean to  prevent difficult lighting and check that the  burner crown holes are not obstructed     5 2 Periodic maintenance    Periodically speak your local Service  Force Centre to check the conditions of  the gas supply pipe and the pressure ad   juster  if fitted        Rem
7. d      Do not let the electricity bonds touch  the appliance or hot cookware  when  you connect the appliance to the near  Sockets      Do not let the electricity bonds tangle      Use a strain relief clamp on cable      Use the correct mains cable      Make sure not to cause damage to the  mains plug and to the mains cable   Contact the Service or an electrician to  change a damaged mains cable      The electrical installation must have an  isolation device which lets you discon     4 www eelectrolux com    nect the appliance from the mains at all  poles  The isolation device must have a  contact opening width of minimum 3  mm     e Use only correct isolation devices  line  protecting cut outs  fuses  screw type  fuses removed from the holder   earth  leakage trips and contractors     Gas connection    e All gas connections should be made by  a qualified person    Make sure that there is air circulation  around the appliance     The information about the gas supply is  on the rating plate     This appliance is not connected to a  device  which evacuates the products  of combustion  Make sure to connect  the appliance according to current in   stallation regulations  Pay attention to  requirements regarding adequate venti   lation     1 3 Use    WARNING   Risk of injury  burns or electric  shock     e Use this appliance in a household envi   ronment        Do not change the specification of this  appliance    e Do not use an external timer or a sepa   rate remote control syst
8. ectrical connection    e Make sure that there is access to the  mains plug after the installation     ENGLISH 11       Do not pull the mains cable to discon   nect the appliance  Always pull the  mains plug       Do not connect the appliance with an  extension cable  an adapter or a multi   ple socket  There is a risk of fire  Make  sure that the ground connection com   plies with the standards and regulations  force        Do not let the connection cable parts to  heat to a temperature above 90  C     Electrical Requirements    Permanent electrical installation must  comply with the latest 1        Regulations  and local Electricity Board regulations  For  your own safety the installation must be  done by a qualified electrician  e g  your  local Electricity Board  or a contractor  who is on the roll of the National Inspec   tion Council for Electrical Installation Con   tracting  NICEIC       The manufacturer declines any lia   bility if these safety measures are  not observed                    The appliance must be connected to a  230 V 50 Hz AC electrical supply    Before activating the appliance  make  sure the electrical supply voltage is the  same as that indicated on the rating plate   The rating plate is located on the bottom  of the appliance    The appliance is supplied with a 3 core  flexible supply cord with a 3 amp plug  If it  is necessary to change the fuse  use a 3  amp ASTA approved  BS 1362  fuse        12 www electrolux com       A B  N The current regula
9. edy      There is no electrical   Make sure that the unit    is connected and the  electrical supply is  switched on    e Control the fuse  If the  fuse is released more  than one time  refer to  a qualified electrician        e Burner        and crown     Make sure that the    are placed uneven    The flame is blow out im   mediately after ignition    burner cap and crown  are in correct positions     e Thermocouple is not    After lightning the  heated sufficient    flame  keep the knob  pushed for approxi   mately 5 seconds        The gas ring burns un   evenly  dues    If there is a fault  first try to find a solution  to the problem yourself  If you cannot find  a solution to the problem yourself  speak  your dealer or the local Service Force  Centre       Burner crown is   Make sure that the in   blocked with food resi     jector is not blocked  and the burner crown  is clear of food parti   cles      i      you operated the appliance in   correctly  or the installation was  not carried out by a registered en   gineer  the visit from the customer  service technician or dealer may  not take place free of charge   even during the warranty period     These data are necessary to help you   quickly and correctly  These data are   available on the supplied rating plate        Model description                     e Product number                                  Serial Number  S N                       Use the original spare parts only  They are  available at Service Force Ce
10. em to operate  the appliance       Do not let the appliance stay unatten   ded during operation       Do not operate the appliance with wet  hands or when it has contact with wa   ter       Do not put cutlery or saucepan lids on  the cooking zones  They become hot        Set the cooking zone to    off    after use     e Do not use the appliance as a work  surface or as a storage surface    If the surface of the appliance is  cracked  disconnect immediately the  appliance from the power supply  This  to prevent an electrical shock     WARNING   Risk of fire or explosion        Fats and oil when heated can release  flammable vapours  Keep flames or  heated objects away from fats and oils  when you cook with them     The vapours that very hot oil releases  can cause spontaneous combustion     Used oil  that can contain food rem   nants  can cause fire at a lower temper   ature than oil used for the first time     Do not put flammable products or items  that are wet with flammable products  in  near or on the appliance     Do not try to extinguish a fire with wa   ter  Disconnect the appliance and cover  the flame with a lid or a fire blanket     WARNING   Risk of damage to the appliance     Do not keep hot cookware on the con   trol panel     Do not let cookware to boil dry     Be careful not to let objects or cook   ware fall on the appliance  The surface  can be damaged     Do not activate the cooking zones with  empty cookware or without cookware     Do not put aluminium foil
11. ffective area       10 www electrolux com    of 100 cm  is required  If it is installed in     room of volume between 5 m  and 10 m   an air vent of effective area of 50       is  required  while if the volume exceeds 11       no air vent is required    However  if the room has a door which  opens directly to the outside no air vent is  required even if the volume is between 5  m         11 m8    If there are other fuel burning appliances  in the same room  B S  5440 Part 2 Cur   rent Edition  should be consulted to deter   mine the requisite air vent requirements   For appliances installed in the Republic of  Ireland please refer to the NSAI  Domestic  Gas Installation I S  813 Current Editions  Table Four        Location    The hob may be located in a kitchen  a  kitchen diner or bed sitting room  with     volume greater than 20 ms   but not in a  bathroom or shower room    The minimum distance combustible mate   rial can be fitted above the hob in line with  the edges of the hob is 400 mm  If it is fit   ted below 400 mm a space of 50 mm  must be allowed from the edges of the  hob    For appliances installed in the Republic of  Ireland please refer to NSAI  Domestic  Gas Installation 1 5 813 Current Edition  Section 7  Permitted Locations of Appli   ance              7 2 Gas Connection    WARNING    Any gas installation must be car   ried out by a GAS SAFE REGIS   TER installer        Make sure that  once the hob is installed   it is easily accessible for the engineer in  
12. isconnect the appliance from the  mains supply      Cut off the mains cable and discard it      Flat the external gas pipes                          Auxiliary burner  Semi rapid burner  Triple Crown burner                     m Control knobs  Rapid burner  000999  2 2 Control knobs Symbol Description  Symbol Description minimum gas  no gas supply      supply  off position    ignition position    maximum gas       X 0     3  DAILY USE    supply  WARNING   Refer to  Safety information     chapter     3 1 Ignition of the burner    AS WARNING     Be very careful when you use  open fire in kitchen environment   Manufacturer decline any respon   sibility in case misuse of the flame       6 wwweelectrolux com    Always light the burner before you  put cookware     To light the burner    1  Turn the control knob counterclock   wise to the maximum position   pa       and push it down    2  Keep the control knob pushed for ap   proximately 5 seconds  this will let  thermocouple to warm up  If not  the  gas supply will be interrupted    3  Adjust the flame after it is regular     i  If after some tries the burner does    not light  check if the crown and  its cap are in correct positions                             A  Burner cap   B  Burner crown      Ignition candle  D  Thermocouple       4  HELPFUL HINTS AND TIPS    WARNING   Refer to  Safety information   chapter     Ej    WARNING    Do not keep the control knob  pushed for more than 15 sec   onds    If the burner does not light afte
13. ly before you do  cleaning or maintenance work      i  Scratches or dark stains on the  surface have no effect on how the  appliance operates       You can remove the pan supports to  easily clean the hob       To clean the enamelled parts  cap and  crown  wash them with warm soapy  water and dry them carefully before you  put them back       Wash stainless steel parts with water   and then dry them with a soft cloth      The pan supports are not dishwasher  proof  They must be washed by hand      When you wash the pan supports by  hand  take care when you dry them as    ENGLISH 7    AN WARNING   Make sure pot handles do not    protrude over the front edge of  the cooktop and that pots are  centrally positioned on the rings in  order to achieve maximum stabili   ty and to obtain lower gas con   sumption     Do not place unstable or deformed pots  on the rings to prevent from spill and in   jury     Information on acrylamides    Important  According to the newest  Scientific knowledge  if you brown food   specially the one which contains starch    acrylamides can pose a health risk  Thus   we recommend that you cook at the  lowest temperatures and do not brown  food too much     the enamelling process occasionally   leaves rough edges  If necessary  re   move stubborn stains using a paste   Cleaner       Make sure you position the pan sup   ports correctly after cleaning      To make the burners work correctly   make sure that the arms of the pan  supports are in the centre of
14. ntre and ap    proved spare parts shops     ENGLISH 9    6 1 Labels supplied with the  accessories bag    Stick the adhesive labels as indicated be   low           1    T    MOD  TYPE  PROD NO  PROD NO  C Ew ae     SER NO SER NO a  DATA DATA MADE IN ITALY          MODEL MODEL        H  X X    Stick it on Guarantee Card and send  this part   Stick it on Guarantee Card and keep  this part                                        7  INSTALLATION    WARNING   Refer to  Safety information   chapter         A    WARNING    The following instructions about  installation  connection and main   tenance must be carried out by  qualified personnel in compliance  with standards and local regula   tions in force     7 1 Important safety  requirements    This hob must be installed in accordance  with the Gas Safety  Installation and Use           Stick it on instruction booklet       Regulations  Current Edition  and the IEE  Wiring Regulations  Current Edition     For appliances installed in the Republic of  Ireland please refer to NSAI  Domestic  Gas Installation 1 5  813 Current Editions  and the ETCI Rules for Electrical Installa   tions        Provision for ventilation    Detailed recommendations are contained  in the following British Standards Codes  Of Practice  B S  6172  B S  5440  Par  2  and B S  6891 Current Editions    The hob should not be installed in a bed  Sitting room with a volume of less than 20  m8  If it is installed in a room of volume  less than 5 m  an air vent of e
15. r  15 seconds  release the control  knob  turn it into off position and  try to light the burner again after  minimum 1 minute     In the absence of electricity you  can ignite the burner without elec   trical device  in this case approach  the burner with a flame  push the  relevant knob down and turn it  counter clockwise to maximum  gas release position     If the burner accidentally goes out   turn the control knob to the off  position and try to light the burner  again after minimum 1 minute     The spark generator can start au   tomatically when you switch on  the mains  after installation or a  power cut  It is normal     3 2 Turning the burner off    To put the flame out  turn the knob to the  symbol 6      A    WARNING    Always turn the flame down or  switch it off before you remove the  pans from the burner     4 1 Energy savings       f possible  always put the lids on the  pans     e When the liquid starts to boil  turn down   the flame to barely simmer the liquid   Use cookware with diameters applicable  to the size of burners                 Burner Diameters of cook   ware  Triple 180   260 mm  Crown  Rapid 160   260 mm  Semi rapid 120   220 mm  Auxiliary 80   180 mm  WARNING   Do not put the same pan on two  burners   x       CaS       E ae          5  CARE AND CLEANING    A WARNING   Refer to  Safety information     chapter      N WARNING    Deactivate the appliance and let it  cool down before you clean it   Disconnect the appliance from the  electrical supp
16. rts   When contacting Service  ensure that you have the following data available   The information can be found on the rating plate  Model  PNC  Serial Number     A Warning   Caution Safety information   i  General information and tips  62 Environmental information    Subject to change without notice     1  A  SAFETY INFORMATION    This appliance is suitable for the following  markets   GB  Before the installation and use of the ap   pliance  carefully read the supplied in   structions  The manufacturer is not re   sponsible if an incorrect installation and  use causes injuries and damages  Always  keep the instructions with the appliance  for future reference                    1 1 Children and vulnerable  people safety  WARNING     Risk of suffocation  injury or per   manent disability     This appliance can be used by children   aged from 8 years and above and per    sons with reduced physical  sensory or   mental capabilities or lack of experience  and knowledge if they have been given   supervision or instruction for the opera   tion of the appliance by a person who is  responsible for their safety     Do not let children play with the appli   ance    Keep all packaging away from children   Keep children and pets away from the  appliance when it operates or when it  cools down  Accessible parts are hot   If the appliance has a child safety de   vice  we recommend that you activate  it    Cleaning and user maintenance shall  not be made by children without super   vision 
17. the event of a breakdown    The manufacturer will not accept liability   should the above instructions or any of  the other safety instructions incorporated  in this instruction booklet be ignored    On the end of the shaft  which includes  the G 1 2  threaded elbow  adjustment is  fixed so that the washer is fitted between  the components as shown in the diagram   Screw the parts together without using  excessive force         gt   1               2779                C  A  End of shaft with nut  B  Washer    C  Elbow   Connection to the gas supply should be  with either rigid or semi rigid pipe  i e   steel or copper    The connection should be suitable for  connecting to R 1 2  1 2 BSP male  thread     When the final connection has been  made  it is essential that a thorough leak  test is carried out on the hob and installa   tion    Make sure that the main connection pipe  does not exert any strain on the hob    If you use flexible metal pipes make sure  that they agree to ISO 10380 and ISO  10807 standards  Be careful they do not  come in touch with mobile parts or they  are not squeezed  Also be careful when  the hob is put together with an oven     A       is important to install the elbow  correctly  with the shoulder on the  end of the thread  fitted to the hob  connecting pipe     Failure to ensure the correct as   sembly will cause leakage of gas     A  A    Rigid connection     Make sure that the gas supply  pressure of the appliance obeys  the recommended values  
18. tions let only a  qualified electrician or a compe   tent person to replace the mains  cable  Do not try to replace it if  you are not qualified to do that     7 6 Replacement of the  connection cable                     replace the connection cable use only  2 HO5V2V2 F T90 or equivalent type  Make  1   2        0 sure that the cable section is applicable to   the voltage and the working temperature    The yellow green earth wire must be ap        proximately 2 cm longer than the brown   or black  phase wire              A  Green and Yellow           B  3 amp fuse 7 7 Building In   C  Brown   D  Cord clamp   E  Blue   min  600 mm    Should you need to replace the plug for  any reason  the wires in the mains lead  are coloured in accordance with the fol         min  450 mm  min  650 mm          lowing code    Green and yellow     Earth  Blue   Neutral  Brown   Live                1  Connect the green and yellow  earth   wire to the terminal in the plug which       is marked with the letter  E  or the             earth symbol      or coloured green   Sa    and yellow    2  Connect the blue  neutral  wire to the M A  terminal in the plug which is markeq       with the letter  N  or coloured black     3  Connect the brown  live  wire to the  terminal in the plug which is markeq  with the letter  L  or coloured red    There must be no cut or stray strands of   wire present  The cord clamp must be   correctly attached on the outer sheath      N WARNING   Make sure that the cut off
19. us ere   lt   Electrolux                9363             USER MANUAL    2 wwweelectrolux com    CONTENTS                         1  SAFETY INFORMATION 3             eee seen en          See               3  2  PRODUCT  DESCRIPTION               rot RUE De esaet Peg trate                  5  3  DAILY USE sur p RERO Re RE Ae        Chee de FR ROCA 5  4  HELPFUL HINTS AND TIPS     ne ERE REN ee EE e tnn nei niens 6  5  GARE AND CLEANING unr mng          sin ooa A i qa usia XO RU sup up BCE NS E 7  6  TROUBLESHOOTING crat uci acce oo isea tp ae ew ok        8  Te INSTALLATIONS  21 nmt dtd it baat dae REPRE E re Res x S deg 9  8  TECHNICAL INFORMATION             m s 18  9  ENVIRONMENT CONCERNS i               ete ineo ale      AA eRe 14    WE   RE THINKING OF YOU    Thank you for purchasing an Electrolux appliance  You   ve chosen a product that brings with it  decades of professional experience and innovation  Ingenious and stylish  it has been designed  with you in mind  So whenever you use it  you can be safe in the knowledge that you ll get great  results every time     Welcome to Electrolux     Visit our website for   Gi Get usage advice  brochures  trouble shooter  service information   483 www electrolux com    7 Register your product for better service        www electrolux com productregistration    Buy Accessories  Consumables and Original spare parts for your appliance   w www electrolux com shop    CUSTOMER CARE AND SERVICE    We recommend the use of original spare pa
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
OM, 356 BT X-series, 356 BF X-series, 2005-04  【プロトニュース】Vol.221を更新しました。  Omega 8001 User's Manual  See catalog or website for vehicle code definitions and further  Manual do Utilizador do TVRMobile HD V2.0  Válvulas de despresurización DV1, DV2 y Válvula de  Darci USB Setup - WesTest Engineering  BIGAVR6 Development System User Manual  GIT - vspdev  Hybex Microarray Incubation System - User Manual    Copyright © All rights reserved. 
   Failed to retrieve file