De Dietrich DLZ714BU washing machine
Contents
1. dispenser to remove it completely Kb Use warm water and a brush to clean the compartments Ke Also clean the additive compartment siphons having removed them first Once they have been cleaned put them back making sure that they fit right in to the back Put the dispenser back into the washing machine A dirty or incorrectly fitted siphon will prevent the additives from being taken in and leave water inside the compartment at the end of the wash E CLEANING THE ACCESSIBLE FILTER AND THE OUTSIDE maintenance and cleaning CLEANING THE FILTER Clean the accessible filter if the drain pump is blocked by any foreign objects Ka Use a coin to turn the filter cap Kb Pullout the filter cap Ke Place a container under the drain pump filter to collect any water that comes out of it Kad Half or quarter turn the filter to the left Water will start to come out Ke When all the water has drained out of the washing machine turn the filter several times until it can be completely removed by gently pulling on it Kf Remove the objects or fluff caught in the filter or the drain pump Put the filter and the filter cap back in place To avoid burns do not carry out this operation when the wash water is at a temperature of over 30 C CLEANING THE OUTSIDE The outside of the washing machine should be cleaned with warrn soapy water or a gentle cleaning agent Do not use abrasive cleaning products or solvent2. 60 55 0 95 50 WOOL wash rinses automatic additive absorption if desired and gentle final spin 0 50 60 Rinses automatic additive absorption if desired and long final spin 0 05 25 B Long final spin Draining 0 05 0 IS EN NN m o NS fe 3 0 00 0 NOTE the KWh and lire consumptions and programme durations may vary depending on the type and amount of clothes mains water pressure ste 4 SPIN SPEED SELECTION _ using the appliance and practical tips SPIN DRYING The wash options must always be selected after choosing the wash programme Any programme change during selection cancels the previously selected options Ka Spin speed selection and anti crease button The selected programme has its own particular spin speed Kb Youcan change it by repeatedly pressing the spin button The spin speed will gradually be reduced at 100 r p m intervals to 400 r p m for display models On non display models the LED will light up Kc No spin Hi Press the spin button again to get to the no spin option A programme without a final spin It is used to prevent creasing when washing special fabrics Kad Anti crease option H The wash programme stops on the last rinse with the clothes left in water When the function is deactivated the washing machine continues the programme draining and spin drying lt is used for example when you are not at home and want to delay
3. All the water drainage mains electricity and earth connections meet the local regulations and or other applicable regulations Power cord Drain hose Control panel Detergent dispenser Stainless steel drum Hatch Accessible filter Adjustable feet Water inlet hose 4 UNPACKING AND UNBLOCKING THE WASHING MACHINE UNPACKING Ka Remove the base corner protectors and top cover UNBLOCKING Ka Remove the screws holding the plastic covers to the back of the washing machine Kb Loosen and remove the 3 blocking screws Ke Cover the holes with the plastic covers you have just removed Do not throw the blocking screws away You may need to move the washing machine at a later date a CONNECTION TO THE MAINS WATER SUPPLY AND DRAINAGE installation and assembl CONNECTION TO THE MAINS WATER SUPPLY The water supply hose is inside the drum Ka Connect the bent end of the hose to the threaded inlet of the electrovalve located at the rear of the washing machine Kb Connect the other end of the hose to the water intake Then securely tighten the connection nut It is important that the drain hose bend is correctly fastened to the outlet to prevent any risk of it becoming detached and causing flooding If your washing machine has a hot water intake connect the hose with the red threaded end to the hot water tap and to the electrovalv
4. duration 4 Additional functions Easy iron A Extra rinse Intensive wash 4 There are four types of programme Normal programmes Delicate programmes Wool programmes Auxiliary programmes eco note We recommend you choose a wash programme without prewash whenever possible This will save you money and help protect the environment Wy Ww messe A Ct st 5 PROGRAMMMES Normal Delicate Wool Auxiliary 1 Normal cold 8 Delicatecold 12 Wool35 G 13 Rinses 2 Quick 30 C 9 Delicate 30 C 14 Spin drying 3 Normal 30 C 10 Delicate 40 C 15 Draining 4 Normal 40 C 11 Delicate 60 C 5 Normal 60 C 6 Normal 80 C 7 Prewash 60 C Programme Normal cold Quick 30 C 3 Normal 30 C 4 Normal 40 C Recommended temperature Fabric type Cotton Linen delicate colours very light soil Cotton Linen whites colours very light soil Cotton Linen delicate colours light soil Cotton Linen fast colours light soil 5 Normal 60 C Normal programmes Cotton Linen fast colour medium soil 6 Normal 90 C 7 Prewash 60 C amp aco Cotton Linen whites heavy soil Cotton Linen whites fast colours heavy soil Possible option buttons YES NO YES YES YES YES YES 8 Delicate cold 9 Delicate 30 C Synthetic mix cotton delicate colours very light soil Synthetic mix cotton delicate co
5. preserve the environment So although the water level you can see through the hatch may look low there is no cause for concern as washing and rinsing efficiency will still be optimum Why is there still some water in the dispenser Why can t open the hatch immediately after the wash has finished Other indications safety and troubleshooting This may be because ihe dispenser needs cleaning This simple operation is described in Maintaining and cleaning the appliance 1 Cleaning the detergent dispenser Washing machines today are provided with safety systems for users One of them is that the washing machine cannot be opened until it is certain that the drum is quite still This is why the hatch cannot be opened for 2 minutes The washing machine can detect other indications When this happens a number of other indicators appear on the display F05 FO6 F10 If this happens call the Official Technical Service eco note INFORMATION FOR THE CORRECT DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC APPLIANCES When your appliance is of no further use it should not be disposed of together with general domestic waste It can be taken free of charge to a specific waste collection centre run by your local authority or dealers who provide this service Disposing of waste domestic appliances separately means avoiding possible negative consequences for the environment and health derived from incorre
6. the spin drying until you get home to prevent the clothes creasing after spin drying and being left in the drum to be removed using the appliance and practical tips TIME DELAY Time delay selection button A delay of up to 24 hours can be selected The delay must be selected after choosing the wash programme To select the hours of delay press the clock button Each time the button is pressed the start of washing is delayed by 1 more hour Cancelling the delay To cancel the delay you have to press the clock button successively The delay will be cancelled when 24 hours have been reached and the bution Is pressed once more If the programme is changed the delay is also cancelled ADDITIONAL FUNCTIONS Additional function selection button depending on programmes Ka Kb There are 3 options easy iron extra rinse and intensive wash Press the button and the desired option will be displayed By pressing the button several times you can choose between several combinations of one iwo and up to three additional functions at the same time depending on the programme selected Button Easy iron 4 This option prevents garments from creasing by means of carrying out a special programme with special turns to fluff out the garments after spin drying and make them easier to iron Button Extra rinse 7 Increases the level of the final rinse obtained in the clothes suitable for large loads and garments be
7. De Dietrich SETTING NEW VALUES DLZ714BU 60CM INTEGRATED WASHING MACHINE _warnings 0 SS o To avoid the risk of fire electric shocks injury or damage when using your washing machine please take the following precautions E This washing machine comes with a manual ihat includes operating maintenance and installation instructions Please read all the instructions before using the washing machine E Do not wash items that have previously been cleaned washed soaked or treated with petrol solvents for dry cleaning other inflammable substances or explosives as they produce fumes that could catch fire or explode E Do not add petrol solvents for dry cleaning or other inflammable or explosive substances to the wash water as they produce fumes that could catch fire or explode E Do not repair or replace any part of the washing machine or try to carry out any type of servicing uniess it is recommended in the maintenance instructions in the manual E Do not climb onto the machine or stand on the open hatch door E Do not use an extension lead or adaptor to connect your washing machine to the mains supply Mi The machine should only be used for the purpose it is designed for B Follow the washing instructions recommended by the manufacturer of the garment to be washed E Do not turn your washing machine on until you are sure that e It has been installed in accordance with the installation instructions
8. Wash heavily soiled garments using a long programme with prewash Ka Sort your clothes according to colour Wash whites and coloured separately We recommend loading the washing machine to its full capacity This means savings on water and energy Whenever possible we recommend that you wash garments of different sizes within the same wash programme This improves the washing action and also aids the correct distribution of the garments in the drum when spin drying and the washing machine will therefore be quieter It is a good idea to put small garments in a wash bag 2 USING DETERGENT AND ADDITIVES using the appliance and practical tips DETERGENT AND ADDITIVES a Ka 1 wy Ka Your washing machine s detergent PREWASH WASH FABRIC SOFTENER dispenser has three compartments Kb Putthe detergent or additive into the detergent dispenser before starting the wash programme Ke Liquid detergents may also be used in this washing machine An optional detergent dispenser is to be used for this which can be obtained from the Technical Service Network Place this optional dispenser inside the wash compartment The level of liquid must never be higher than the MAX mark printed on the dispenser wall Important Remember that the amount of detergent to be used will always depend on E The amount of clothes to be washed E How heavily the clothes are soiled B The hardness of the water Information on water hard
9. ct disposal This will enable the materials in them to be treated and recycled obtaining important savings in energy and resources To highlight the obligation of collaborating with selective waste collection the product is marked with a symbo to warn against using traditional containers for disposing of the appliance For further information contact your local authority or the shop where you purchased the product B
10. e with the red filter The washing machine must be connected to the mains water supply using the new supply hoses supplied with the appliance Do not use water supply hoses that have been used before For your washing machine to work properly the mains water pressure must be between 0 05 and 1MPa 0 05 and 10 Kgr cm Important DRAINAGE CONNECTION Ka tis recommended that you have a fixed drainage outlet 50 to 70 cm from the floor Avoid the drain hose being too tight kinked or restricted LEVELLING THE WASHING MACHINE AND CONNECTING IT TO THE MAINS ELECTRICITY SUPPLY installation and assembl LEVELLING Use the adjustable feet to level the washing machine This will reduce the noise level and prevent it from moving during use Do not bring the feet too far out you will achieve better stability You need to use a spanner for the models that have a nut ELECTRICAL CONNECTION Consult the specifications plate located on the hatch door of the washing machine before making the electrical connections Ensure that the voltage reaching the plug is ihe same as that on the plate Do not remove the specifications plate The information on it is important It is very important to correctly earth the To remove the power cord pull on the washing machine The electrical body of the plug installation plug socket fuses or If the power cord is damaged it must be automatic switch and counte
11. longing to people with sensitive skin Increases waier consumption Button Intensive wash F This option specially recommended for heavily soiled stained clothes achieves beiter results by extending the normal wash cycle If during the additional function selection the programme is changed or the Start Stop button is pressed all the functions selected until then are cancelled Important 83 6 STARTING UP AND BLOCK FUNCTION SELEGTION i using the appliance and practical tips STARTING UP Start Stop button Ka To start up the washing machine you have to press the Start Stop button The minutes remaining until the end of washing and drying will appear on the display at all times BLOCK FUNCTION Block function selection The lock function ensures that the programme will not be affected if any buttons are pressed it is used when children could press the buttons etc The block function should be activated after the wash programme has been selected together with all its options Activating the block function m Ka The block function is activated by pressing the Start Stop button and holding it down for at least 3 seconds The display will show if it is activated Deactivating the block function Kb The block function is cancelled when the wash programme comes to an end If you want to deactivate the block function before the end of the programme you have to hold the
12. lours fight soil 10 Delicate 40 C Synthetic mix cotton delicate colours medium soil Delicate programmes 11 Delicate 60 C Synthetic mix cotton whites fast colours medium soil 12 Wool 35 C Wool woll mix whites colours light soil Wool prog 13 Rinses Cotton cotton mix Synthetic Delicate WoolAwool mix 14 Spin drying Cotton cotton mix Synthetic Delicate Woolfwool mix Auxiliary Prog 15 Draining Cotton cotton mix Synthetic Delicate Wool wool mix NO Programme for wash and energy consumption assessment in accordanca with standard EN60456 press intensive wash button Max load Wash g B desired and long final spin Programme i Total Approx of clothes product description consumption duration Ka com partment KWh Litres minutes Normal wash rinses automatic additive absorotion if SHORT wash rinses automatic additive absorption if desired and long final spin Normal wash rinses automatic additive absorption if desired and long final spin Prewash normal wash rinses automatic additive absorption if desired and long final spin g Delicate wash rinses automatic additive absorption if desired and gentle final spin TURBO TIME PLUS 0 15 46 60 0 20 30 30 80 1 02 49 1 90 55 120 1 46 60 105 0 15 55 0 30 55 0
13. m the same cycle phase it had stopped at If there is a power cut when the electricity comes back on the washing machine will continue to run from where it left off it has several hours of memory The same will happen if the ON OFF button is pressed Wa PnIngs __ B Level the washing machine by adjusting the I All the models have a safety system for spin drying feet to reduce the noise caused by spin drying that prevents spin drying from being carried out if the distribution of the clothes Inside the drum is too W Try and wash clothes of different sizes in concentrated This prevents the appliance from vibrating the same wash programme to favour the too much distribution of the clothes inside the drum during spin drying if you find that the clothes are not properly wrung out try spin drying them again after having distributed the clothes more evenly in the drum Important After each wash leave the door open for a while to allow the air to circulate freely inside the machine From time to time depending on the hardness of your water it is recommendable to run a full wash cycle using a decalcifying product This will extend the life of your washing machine The washing machine should be disconnected from the mains electricity supply before any cleaning or maintenance is carried out Clean the detergent dispenser whenever there is any washing product residue left inside Ka Pull outwards on the detergent
14. ness in your area can be obtained from the competent local authorities We recommend the use of a decalcifying product if the water hardness is high in your area eco note Remember that concentrated detergents you money it will have a negative effect exist which are more environment and on the preservation of the nature friendly EZ event The use of more detergent than LT We therefore recommend you follow necessary will not improve your the detergent manufacturer s washing resulis and apart from costing instructions 3 SELECTING THE WASH AND DRY PROGRAMME using the appliance and practical tips start stop button screen i i ditional detergent dispenser programme spiniand tme ae selecior anti crease delay bution button button start stop button screen i pragramme spin and time additional detergent dispenser selector anti crease delay function button button button The procedure for selecting the wash and dry programme is as follows Ka Activate the programme selector by pressing it to release it Kb Select the wash programme by turning the programme selector dial see programme table The display on the control panel will light up using the appliance and practical tips When you select the programme the following information will be displayed 1 Wash programme phases Prewash Wash Rinse Spin drying and draining 2 Spin speed 3 Programme n for a few seconds and then programme
15. noise This is due to the mechanical action of the motor itself and is perfectly normal safety and troubleshooting Why doesn t the washing machine take in water Why doesn t the washing machine drain or spin dry Why doesn t the washing machine spin dry Why can t see any water in the drum during the wash If no water is entering FO1 will appear on the display Indicator FO1 no water coming in this may be due to a cut in ihe water supply a tap turned off or a blocked water inlet filter The possible solutions are as follows wait for the water supply to be reconnected turn on the tap or remove the water inlet hose and clean the filter If this failure is detected F02 will appear on the display The reasons for the F02 indicator may be the following washing machine drain pump blocked building drainage pipes blocked or incorrect pump electrical connection Solution if the pump is blocked gain access to it as described in section 2 maintaining and cleaning the appliance If this failure is detected C03 will appear on the display This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations The solution is to select a spin drying programme This is due to the fact that the washing machine is provided with a system which is able to adapt to the load and type of fabrics adjusting the levels of water and energy used in order to
16. r must be replaced by a cord or special unit provided correctly dimensioned for the maximum by either the manufacturer or your after power indicated on the specifications sales service plate _ a With built in washing machines the plug Do not plug the washing machine plug must be accessible after installation into the socket with wet or damp hands Important 74 4 PRE CLEANING PRE CLEANING When your washing machine has been correctly installed we recommend that you pre clean the machine This is to check that the installation the connections and the drainage are all correct and to thoroughly clean the inside of the washing machine before any wash programmes are run see the operating instructions on the following pages Ka Select the normal programme at 60 C Kb Press the Start Stop button 1 PREPARING GARMENTS FOR WASHING Before placing the clothes in the drum make sure all the pockets are empty Any small objects may block the drain pump Ka Sort the clothes according to fabric and how they are made Important We recommend using the delicate Make sure programmes for sensitive fabrics There beforehand is a special wool programme for that your woollens woollens can be machine Kb Sort clothes according to how soiled washed they are Wash lightly soiled garments using a short programme e Use a programme without prewash for medium soiled garments
17. s It should then be thoroughly cried with a soft cloth When there have been spillages of detergent or additives from the dispenser onto the washing machine cabinet clean them up right away as they are corrosive Important If you detect any problems with your washing machine you will probably be able to rectify them yourself by consulting the following instructions Indicaor Problems FO1 No water coming in FO2 Does not drain or spin dry If this is not the case unplug the appliance and contact the TECHNICAL ASSISTANCE SERVICE CO3 Does not spin dry FO4 Does not start FOS Do not open up the washing machine It does Cali the Technical Assistance Service not contain any fuses or 2 similar components that F10 gl can be replaced by the user This may be due to the following BLEMS PRO B Check the door is properly shut Why won t the washing E The washing machine is not plugged into the mains or machine start there is no voltage in the mains supply E The Start Stop button has not been pressed B If the washing machine door is not properly shut F04 will appear on the display Why is the washing machine This may be due to the following vibrating or making too much noise EB The blocking and transport screws have not been removed The washing machine has not been correctly levelled On spin drying the rnotor makes a kind of whistling
18. start button down again for at least 3 seconds Aiter 3 seconds the block function indicator will disappear from the display and it will go into pause status The Start Stop button does not cancel the block funciion 5 WASH PROGRAMME PHASES fe AND POWER CUTS using the appliance and practical tips PROGRAMME PHASES When the programme is running the t Wy ae programme phase and the time remaining for SO it to end will appear on the display The active phases will appear successively at it ft H i i the top of the display as the programme Tut m progresses The time remaining until the end of the programme will also appear on the display It updates at regular intervals but not minute by minute If the programme is changed on the selector Any option button can be selected provided dial during the washing and drying process the wash phase in which it takes effect has the washer will go onto PAUSE status and not been passed and when the programme the programme will be cancelled accepts the option G 2 If you need to add or remove a garment press Pressing the delay button during washing will ol the Start Stop button and make sure that the have no effect on the washer Qj water level is not above the door overflow El level and that the temperature inside is not Pressing the Start Stop button during the wash high Press the Start Stop button again to activates the PAUSE function restart the wash fro
Download Pdf Manuals
Related Search