IRC Honeybee II
Contents
1. s instructions Switch off and withdraw the main plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DON T remove any fixed cover as this may expose dangerous voltages Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety DON T listen to headphones at high volume as such use can permanently damage your hearing DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation Switch off using the switch on the equipment and make sure that your family knows how to do this Special arrangements may need to be made for infirmed or handicapped people DON T continue to operate the equipment if you are in any doubt about whether it s working normally or if it s damaged in any way Switch it off and withdraw the main plug and consult your dealer ESD Remark In case of malfunction due to electrostatic disc2. Continue above step3 turn the SELECT knob to Standby and then press this knob to confirm 2 Turn the SELECT knob to your selecting one High Medium or Low and then press it to confirm Setting to low level is highly recommended How to Set Language The default language is English To change please follow below 2 steps 1 It can be activated from lt System gt gt lt Language gt press SELECT to confirm 2 Turn the SELECT knob to your selecting language option and then press the SELECT knob to confirm How to Factory Reset X Sometimes you might want delete all the settings your radio currently has to have your radio return to its factory default setting mode do following steps it s pretty easy 1 It can be activated from lt System gt gt lt Factory Reset gt press the SELECT knob to confirm 12 00 Factory Reset lt No gt Yes 2 Turn the SELECT knob to lt Yes gt press this knob to confirm 12 00 Factory Reset No lt Yes gt 3 Press the SELECT knob to confirm and then the radio will perform a restart How to Get SW Version X Note The helpdesk may ask you for the software version of your product 1 It can be activated from lt System gt gt lt SW version gt 12 00 System lt SW version gt 2 Press the SELECT knob to confirm Now you get it 20 Specifications DESCRIPTION Spe
3. appears Turn the SELECT knob to convert alarm status from On to Off and press this knob to confirm 08 18 Alarm 1 Wizard Alarm Off Follow your radio s demonstration until it shows you Alarm Saved simultaneously D icon will disappear How to Set Equaliser X Two preset Equaliser modes are available VI Treble 5 4 3 2 1 0 1 2 3 4 5 level Bass 5 4 3 2 1 0 1 2 3 4 5 level It can be activated from lt System gt gt lt Equaliser gt Press the SELECT knob to confirm 12 00 Equaliser lt Treble Turn the SELECT knob to your preferred option Treble or Bass press this knob to confirm Let s take set Treble as example Turn the SELECT knob to the level you like press this knob to confirm and it is done How to Set Backlight X Note Here High backlight level can get you pretty easy to view the station information Low backlight level can let you feel comfortable while you do not want the light bothering you 1 It can be activated from lt System gt gt lt Backlight gt Press the SELECTE knob to 12 00 confirm Backlight lt Power On 2 When cursor points to Power On press the SELECT knob to confirm and then turn this knob to cycle through options X Note at this step High Medium and Low available 3 Press the SELECT knob to confirm Setting to high level is highly recommended 1
4. Scanning 19 XA Note In use your radio may automatically run to your last listening mode while turn it on 3 Once the scanning is finished the DAB DAB stations will be displayed in alphanumeric order The first station in the list would be selected 4 If station detected please follow 2 steps Firstly please place your radio on stronger signal position Secondly press SCAN 5 Want to shift to another program waiting until the scanning is completed or while playing a DAB DAB program turn the SELECT knob to view stations list and then press this knob to confirm your preferred program How to Update Station List lt Note todo this placing your radio a stronger signal position is highly recommended M Simply press SCAN to complete this order or follow below two steps 1 Press MENU while cursor point to lt full scan gt 12 00 lt Full scan gt 2 Press the SELECT knob to confirm Wait a minute The radio will scan all the DAB DAB channels and add any new stations available to the station list How to Show Signal Strength While playing a DAB DAB program repeatedly press e DAB INFO until the LCD screen display shows a signal bar with 1 2 0 0 the strength of the current station GOO BEN The indicator on the signal bar shows the minimum Minimum signal level acceptable signal level Strength of signal X Note Stations with signal strength below the mini
5. System lt Time gt Clockwise turn the SELECT knob lt Equaliser gt Clockwise turn i the SELECT knob lt Backlight lt Language gt lt Factory Reset gt L lt SW version gt How to Have Strong Stations Available Only M By default FM scans stop at any available station This may result in a poor signal to noise ratio hiss from weak stations To change the scan settings to stop only at stations with good signal strength please follow 2 steps 1 Press MENU while cursor point to lt Scan setting gt press the SELECT knob to confirm 12 00 Scan setting x lt All stations gt X Note there are only two options available Strong stations only and All stations 2 Turn the SELECT knob to Strong stations only press this knob to confirm How to Set Audio to Forced Mono By default all stereo stations are reproduced in stereo For weak stations this may result in a poor signal to noise ratio hiss To play weak stations in mono please follow below 2 steps 1 Press MENU and then turn the SELECT knob to lt Audio setting gt press this knob to 12 00 Audio setting x lt Stereo allowed gt X Note there are two options available Stereo allowed and Forced mono 2 Turn the SELECT knob to Forced mono and then press this knob to confirm General Operation How to Set Station Presets Your radio
6. INTERNATIONAL RECEIVER COMPANY DAB DAB FM Digital Radio Instruction Manual IKR1240DAB Honeybee Frozen Stone Safety Precautions To achieve the utmost in enjoyment and performance and in order to become familiar with its features please read this manual carefully before attempting to operate the unit This will assure you years of faithful trouble free performance and listening pleasure Important Notes e These safety and operating instructions should be retained for future reference e The apparatus should not be exposed to dripping or splashing and no objects filled with liquids such as vases should be placed on the apparatus e Avoid installing the unit in locations described below o Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters On top of other stereo equipment that radiates too much heat Places blocking ventilation or dusty places Places subject to constant vibration Humid or moist places e No naked flame sources such as lighted candles should be placed on or near the unit e The apparatus should be used in moderate climates e Operate turning controls and switches as instructed in the manual e Before turning on the power for the first time make sure the power cord is properly installed O O O For safety reasons do not remove any covers or attempt to gain access to the inside of the product Refer any servicing to qualified personnel Do not attempt to remo
7. and then press this knob to confirm using the same method to set minutes 5 Press the SELECT knob to confirm and then turn this Knob to select the duration time 15 30 45 60 and 90 minutes 08 18 Alarm 1 Wizard Duration 60 Mins X Note When the alarm sounds if you don t press any button it will continue to sound until it reaches the duration time you ve set 6 Press the SELECT knob to confirm and then turn this knob to check the alarm source DAB FM Buzzer 08 18 Alarm 1 Wizard Source Buzzer 7 Press the SELECT knob to confirm and then turn this knob to browse the frequency of the alarm Daily Once Weekends Weekdays 08 18 Alarm 1 Wizard Daily 8 Press the SELECT knob to confirm Now the alarm setting is done X The alarm volume level should coincide with the radio volume level that is to say you can adjust the alarm volume by turning the VOLUME knob e Turn off Alarm When the alarm sounds press STANDBY ON or ALARM to cancel it or Activate SNOOZE Press the SELECT knob to postpone it 5 minutes The snooze icon will appear 08 18 Snooze 04 59 Note a Alarm will sound again after the snooze time has elapsed b Want to continue enjoying your program Press STANDBY ON again Cancel Alarm Press ALARM to enter alarm1 setting mode or press ALARM once more to select alarm 2 Press the SELECT knob to confirm then Alarm On
8. b Control DAB DAB AUX IN mode STANDBY ON Press to turn on off Radio Press to system and other options Press repeatedly to shift display queue information Press to scan stations Press and hold to store current playing station to station presets No function Press to access to appointed stored station Press to switch between DAB DAB FM and Auxiliary mode Press to set alarm Turn to adjust volume level Turn to change options press to confirm FM mode press to auto search for next available station When alarm sounds press to postpone it for 5minutes XL Note in the following section we shortly call it the SELECT knob Overview b antenna Headphone AUX IN Power cord socket Unit Back View A 3 5mm Headphone Socket is provided for use with either Headphone headphones or an earpiece socket Inserting a plug automatically mutes the internal loudspeaker AUX n Uniquely designed for connection to external audio device Power cord Uniquely designed for power cord DAB DAB MODE How to Get Start X Note Place your radio on a suitable shelf or a flat table and then connect the power adapter between your radio and the mains supply 1 Extend the antenna found on the back of radio Press STANDBY ON to switch it on 12 00 Welcome to Digital Radio 2 For initial use your radio will make a full scan and store every station it can be detected in its memory 12 00
9. can store 10 DAB DAB and 10 FM station presets To store the current station DAB or FM mode use only 1 Press and hold PRESETS button 12 00 Preset Store lt 1 Empty gt 2 Turn the SELECT knob to cycle through preset stations 1 10 3 When your desired option appears press the SELECT knob to confirm and your radio will send you a Preset X stored message How to Select a Preset Station To select a stored station 1 Press MODE repeatedly to convert to relative mode DAB or FM mode 2 Press PRESETS button to recall 12 00 Preset Recall lt 1 waiting ina gt 3 Turn the SELECT knob to your desired program and press this knob to confirm How to View the Station Information It is possible to view the information that is displayed on the second line of the display when listening to a DAB DAB or FM program by pressing INFO repeatedly AUX IN MODE How to turn in AUX IN Mode 1 Switch Radio on and press MODE repeatedly until lt Auxiliary Input Mode gt appears 12 00 Auxiliary Input Mode 2 Now your radio is ready to be transformed into a high quality digital audio speaker system 3 Connect one end of the cable lead to the headphone or auxiliary out socket of your source device connect the other end to the AUX socket on the rear of your radio 12 00 Auxiliary Input 00 00 00 4 To gain optimal volume levels adjusting the output v
10. cifications DAB DAB and FM Digital Radio Audio Output 5Wrms FM 87 5 108MHz DAB 174 240MHz Frequency Ranges LCD Display High resolution display AC Power Input 100 240VAC 50 60Hz please use our provided adapter Dimension 212mm x 123mm x 111mm Power Supply This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste There are separate collection systems for recycling in the EU For more information please contact the local authority or the retailer where you purchased the product International Receiver Company 45 7026 2446 www ircgo com 21
11. harge just reset the product reconnection of power source may be required to resume normal operation NOTE In the unlikely event of a problem with your product please return to the store where you purchased it Table of Contents Safety Precautions Table of Contents Package Content Overview a Overview b DAB DAB MODE How to Get Start How to Update Station List How to Show Signal Strength DAB DAB Menu Tree FM MODE How to Tune in FM Mode FM Menu Tree How to Have Strong Stations Available Only How to Set Audio to Forced Mono General Operation How to Set Station Presets How to Select a Preset Station How to View the Station Information AUX IN MODE How to turn in AUX IN Mode System Setup How to Enter System Setup How to Set Sleep How to Set Time How to Set Alarm How to Set Equaliser How to Set Backlight How to Set Language How to Factory Reset How to Get SW Version Specifications vo o O DO N oo WH N b N N N e e FP PA e Pe ba FP BP SFP bek bk bek SB b b PA h ba Mo O O MO aa oo a wo db R A JA W bk Ki FP KA ba Package Content 3 lt 2005 NI 39 CMF OMT gt it ir dd DAM FR Gigital DAB Dp Hanu Instruction Overview a Display screen STANDBY ON MENU INFO SCAN PRESETS CCD COC MODE ALARM INFO SCAN PRESET INTERNATIONAL RECEIVER COMPANY STANDBY ON MENU MODE ALARM VOLUME knob SELECT SNOOZE kno
12. mum signal level will not provide a steady stream of audio DAB DAB Menu Tree 12 00 Classic music Playing Press MENU 12 00 the SELECT knob 12 00 DAB Scanning 89 lt Full scan gt Clockwise turn the SELECT knob a DAB Press 1 2 e 00 the SELECT knob rn DAB lt DRC gt Clockwise turn lt DRC high a Clockwise turn the SELECT knob lt gt lt DRC low gt the SELECT knob Press a DAB the SELECT knob 1 2 00 Clockwise turn lt No gt Yes the SELECT knob Press the SELECT knob gt lt Alarm Clockwise turn lt Time the SELECT knob lt Equaliser Clockwise turn the SELECT knob lt Backlight gt lt Language lt Factory Reset gt lt SW version How to Set DRC Dynamic Range Control value You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level between radio stations eS Note Set DRC to off indicates no compression set DRC to low indicates little compression set DRC to high shows maximum compression 1 Press MENU and turn the SELECT knob to lt DRC gt 2 Press the SELECT knob to confirm and then turn this knob to your preferred option 12 00 DRC lt DRC off gt 3 Press the SELECT knob to confirm How to Prune Inactive Stations X Note by doing this inactive stations will be removed from DAB DAB statio
13. n list 1 Press MENU and turn the SELECT knob to lt Prune gt 2 Press the SELECT knob to confirm 12 00 Prune lt No gt Yes 3 Turn the SELECT knob to Yes press this knob to confirm FM MODE How to Tune in FM Mode 1 Power on radio and then press MODE repeatedly to lt FM Mode gt 2 For initial use it will start at the beginning of the FM frequency range 87 50MHz Otherwise the last listened FM station will be selected 12 00 87 50MHz No RadioText manually change FM frequency while frequency is showing up turn the SELECT knob to change it 0 05MHz per step 4 To auto search while frequency is showing up simply press the SELECT knob or SCAN X Note the display will show the changing frequency until it stops at the next station a After the scanning run to the end of the frequency range it indicates 87 50MHz and wait for your further action FM Menu Tree 12 00 98 10MHz RadioText Fress MENU 1 2 00 d the na knob 1 2 E 00 lt Scan setting gt 9 lt All ae a ing E Clockwise tum lt strong stations gt 1 he SELECT knob 1 2 00 the Gte knob 1 2 00 FM Audio setting lt Audio setting gt lt Stereo allowed gt Clockwise turn lt Forced mono gt the SELECT knob Forced mono 12 00 Press system E the SELECT knob lt Sleep gt 00 e FM lt Alarm gt lt
14. olume level on the source device as well is recommended X Note AUX IN allows for quick and easy connection to an player or other external sound Sources 14 System Setup How to Enter System Setup 1 Press MENU turn the SELECT knob to lt System gt and then press this knob to confirm 2 Turnthe SELECT knob to cycle through options Sleep Alarm Time Equaliser Backlight Language Factory Reset SW version The following will provide you more details How to Set Sleep X Note you might want your radio turn itself off after a certain time follow below steps it can be easily achieved 1 Continue above while cursor points to lt Sleep gt press the SELECT knob to confirm 12 00 Set sleep time Sleep off 2 Turn the SELECT knob to define the sleep period off 15 30 45 60 90 minutes 3 Press the SELECT knob to confirm your selecting period then sleep icon E appears o 12 00 87 80MHz LNo RadioText 5 Select lt Sleep gt option again and then press the SELECT knob to check how long the sleep time will be 6 Radio will automatically switch to standby mode after the set time has elapsed 7 continue enjoying your program press STANDBY ON button How to Set Time It can be activated from lt System gt gt lt Time gt Press the SELECT knob to confirm 12 00 Time lt Set 12 24 hour gt X N
15. ote here turn the SELECT knob a range of time settings are available which include the NAA E functionality to set lt Set 12 24 hour format gt Set 24 hour and Set 12 hour lt Auto update gt Auto update from DAB and No update lt Set date format gt 00 DD MM YYYY lt Set Time date gt Manually set up both Time and Date Continue above step turn the SELECT knob to lt Set Time Date gt press this knob to 12 00 confirm Set time 00 00 Turn the SELECT knob to change hours and then press this knob to confirm Turn the SELECT knob to change minutes and then press this knob to confirm Now radio will ask you to set the date month and year in turn step by step to set them the Time setting should be done in a minute How to Set Alarm X Note For this setting please ensure that clock setting has been done 1 2 Press ALARM to go directly to its setting mode While the Alarm icon is twinkling you can choose alarm2 by pressing ALARM once more Let setting alarm1 as example 08 18 Alarm 1 Setup While cursor point to lt Alarm 1 Setup gt press the SELECT knob to confirm a 08 18 Alarm 1 Wizard Alarm Off 3 Turnthe SELECT knob to Alarm press this knob to confirm 08 18 08 18 Alarm 1 Wizard Alarm 1 Wizard Alarm On On time 06 00 4 Turn the SELECT knob to change hours
16. ve any screws or open the casing of the unit there are no user serviceable parts inside Refer all servicing to qualified service personnel 4 CAUTION RISK OF ELECTRIC CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL SHOCK DANGEROUS VOLTAGE Dangerous Voltages that may be of sufficient magnitude to constitute a risk of electric shock to persons are present within this product s enclosure ATTENTION A The owner s manual contains important operating and maintenance instructions For your safety it is necessary to refer to the manual WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING Note This unit will become warm when used for a long period of time This is normal and does not indicate a problem with the unit Safety Information Some Do s Don ts For the Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the main plug extension leads and inter connections between the pieces of equipment are properly made and in accordance with the manufacturer
Download Pdf Manuals
Related Search