MSI Wind Top AG270 2QC 3K-002EU
Contents
1. For any further information on the product users purchased please contact the local dealer Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center since it may cause the warranty void It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service misi Chapter 2 Getting Started This chapter provides you with the information on hard ware setup procedures While connecting peripheral devices be careful in holding the devices and use a grounded wrist strap to avoid static electricity N Getting Started Safety amp Comfort Tips The AIO PC is a portable platform that allows you to work anywhere However choos ing a good workspace is important if you have to work with your PC for a long period of time 1s 2 o om Your work area should have enough illumination Choose the proper desk and chair and adjust their height to fit your posture when operating When sitting on the chair sit straight and keep a good posture Adjust the chai2. VA P3 I eeee02e0202020800080080080 e e e e e e I fl Jl II l 9 S l pB0Bn865 PACA BABABABABABAOASAAAOHBABHBABABABABABAAABHA HOABABH BASH BA BBBABADABABABABAAABABABRBABAORBABAGRAAGAAAG jian I l 2 We suggest that you connect the AC DC adapter to your AIO PC first and then connect the AC power cord to the socket outlet for safety concerns Q All in One PC Ventilator The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating Do not cover the ventilator Kensington Lock Port This AIO PC provides a Kensington lock port which allows users to secure the AIO PC in place with a key or some mechanical PIN device and attached through a rubberised metal cable The end of the cable has a small loop which allows the whole cable to be looped around a permanent object such as a heavy table or other similar equipment thus securing the AIO PC in place Stand Use this stand to position your system on a flat and stable surface TV Tuner Antenna Connector Optional This connector is provided for digital TV tuner antenna HDMI In Port Optional Kk JJM 4 HIGH DEFINITION MULTIMEDIA INTERFACE with MSI Instant Displa
3. Yellow cr 9 Green Orange unu LED Color LED State Condition Left Yellow Off LAN link is not established On steady state LAN link is established On blinking The computer is communicating with another computer on the LAN Right Green Off 10 Mbit sec data rate is selected On 100 Mbit sec data rate is selected Orange On 1000 Mbit sec data rate is selected USB 3 0 Port Optional The USB 3 0 port is backward compatible with USB 2 0 devices It supports up to 5Gbit s SuperSpeed data transfer rate USB 2 0 Port The USB Universal Serial Bus port is for attaching USB devices such as keyboard mouse or other USB compatible devices It supports up to 480Mbit s Hi Speed data transfer rate Microphone Jack This connector is provided for microphones Line Out Jack This connector is provided for headphones or speakers Important High speed devices are recommended for USB 3 0 ports whereas low speed devices such as mouse or keyboard are suggested to be plugged into the USB 2 0 ports on the rear panel All in One PC Side View e o OO O OQ o T y
4. AG270 AE270 AE2712 Series All in One AIO PC MS AF11 AF12 AF15 AF16 AF18 System G52 AF181X4 Preface Contents EA D _ Copyright i els NNI TE ERIS E RE iii TAGS AUS P m iii dcs SION NE omn iii Upgrade and Waraniyi FIR ERRE EA EUR HG DR Epi iv Acquisition of Replaceable Parts a a iV Techical SUD OI uuu uu uuu luu L 2 tate ass S sssssmasssisssstzsssast iv Green Product da Ui NIE ETT TOT iv F viropni t PpPoliyuu ul u nE EE EE EEEE EE Udo Nb eR V Chemical Substances Information a V Battery Information entendu n ae ERA EedednUs uut aae V SMU E eel RETRO TETTE vi CEC G MI MNT TU UTE viii FCC B Radio Frequency Interference Statement viii VWEEE Stalone ores ix dae eo Ma asd Quinta KU Du nixa d Mta spec EASA TEES ES EEEE viii OVerVIOW ausesuuexkuusudummi uS wa EE EM Rd E Ron GR RR Rr c a an D Packing CoOnteni8S UU Tl uinsteo etes redisse eMe tented Fede a au ine 1 2 System OVErViSW LULU una sssssssaqssskassqusaspaqataqsqisayaassaskusataqaysusakaksqas 1 3 Component Replacement amp Upgrade 1 9 Getting Started 2 1 Safety amp Comfort TpS Uu toten uuu ua ssssissssssayssk
5. NEXT CANCEL System Operations 3 The system restore is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system oN RECOVERY TOOL 4 The following message indicates a successful system restore Press OK to finish Restart the system and access the Windows operating system as usual If the restore process fails or is interrupted please start the whole procedure all over again m FREcOVERY TOOL CANCEL All in One PC gt System Recovery This tool helps to recover the system back to factory default settings All data on the HDD will be erased while all settings will be restored to factory default Follow the instructions below to continue 1 Select Recover to factory default to enter Alternatively select X or press Esc on the keyboard to exit 6 d FREcCOVERY TOOL X e t to select ENTER to confirm ESC to exit e Recover to Backup System Restore System factory default 2 The system will be recovered to factory settings All data will be gone Make sure all important data have been backed up Select NEXT to continue Alternatively select CANCEL to stop yess RECOVERY TOOL P r T Recover TO factory default CANCEL d N System Operations 3 Please select OK so that the system can recover its default setup n RECOVERY TOOL ris De er A Ea etary pm 1 Put Recover to f
6. If you are using an external microphone check that the microphone is plugged into the Microphone jack The Internet connection has problems 1 If you are having a problem connecting to your Internet Service Provider ISP check if the ISP is experiencing technical problems 2 Check the Network settings and connection and make sure the system is properly configured to Internet access 3 The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points To maximize the data transfer speed choose the access point closest to your system All in One PC System speakers do not work 1 Check the master volume setting in the Audio Mixer 2 If you are using an application that has its own volume control check if the volume is muted 3 If you have connected an audio cable to the Headphone jack disconnect it 4 If the system has OSD function please adjust the volume of OSD I cannot play a CD DVD with the DVD ROM of the system 1 Make sure the label of the CD DVD is facing up 2 If the CD DVD requires software make sure the software is well installed according to the program instructions 3 If a region code warning appears when you play the DVD the problem could be that the DVD is incompatible with the DVD ROM in your system The region code is listed on the disc packaging 4 If you see video but cannot hear audio check the media player Also make sure the speakers
7. Oo System Operations Power Management Power management of personal computers PCs and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits To be energy efficient turn off your display or set your PC to sleep mode after a period of user inactivity Power Management in Windows 7 Power Options in Windows OS allow you to control the power management features of your display hard drive and battery Go to Start gt Control Panel gt System and Security E Control Panel Adjust your computer s settings d System and Security A Review your computer s status Back up your computer Find and fix problems Then click on the Power Options link Select a power plan that suits your personal needs You may also fine tune the settings by clicking Change plan settings The Shut Down Computer menu presents the options of Sleep S3 S4 amp Shut Down S5 for rapid and easy management of your system power gt Power Management in Windows 8 x Power Options in Windows OS allow you to control the power management features of your display hard drive and battery Go to Start gt Control Panel gt System and Security Adjust your computer s settings ESE System and Security i 4 Review your computer s status Save backup copies of your files with File History Find and fix problems Then click on the Power
8. and to prevent the Ty equipment from overheating Do not cover the ventilator 33 Do not leave the equipment in an unconditioned environment with a storage temperature above 60 C 1409F or below 0 C 32 F which may damage the equipment NOTE The maximum operating temperature is around 40 C All in One PC m Never pour any liquid into the opening that could damage or cause electrical shock Place the power cord in a way that people are unlikely to step on it Do not place anything on the power cord S When installing the coaxial cable to the TV Tuner it is necessary to ensure Section 820 93 Grounding of Outer Conductive Shield of a Coaxial Cable Always keep the strong magnetic or electrical objects away from the equipment that the metal shield is reliably connected to protective earthing system of the building S Cable distribution system should be grounded earthed in accordance with ANSI NFPA 70 the National Electrical Code NEC in particular tod 4 If any of the following situations arises get the equipment checked by service personnel S The power cord or plug is damaged Liquid has penetrated into the equipment The equipment has been exposed to moisture The equipment does not work well or you can not get it work according to user s manual The equipment has dropped and damaged E The equipment has obvious sign of breakage 1 The optical storage
9. has been made Click Close to exit or select Change connection settings to modify the WLAN settings System Operations System Recovery Windows 7 Important The Recovery Tool is only available on systems bundled with Windows OS and MSI utilities by default The purposes for using the Recovery Tool may include Restore the system back to the initial status of original manufacturer s default settings When some errors have occurred to the operating system in use m When the operating system is affected by virus and is not able to work normally m When you want to install the OS with other built in languages Before using the Recovery Tool please back up the important data saved on your system drive to other storage devices If the following solution fails to recover your system please contact the authorized local distributor or service center for further assistance gt Recovering the System with the F3 Hotkey If the system encounters non recoverable problems it is always recommended that you try the F3 hotkey to recover your system with the recovery partition of the hard disk drive first Follow the instructions below to continue 1 Restart the system 2 Press the F3 hotkey on the keyboard when the following image appears All in One PC 3 Enter the Recovery Tool This tool contains three features Backup System Restore System and Recover to factory default Nn HE REcovery TFOOL 5 t
10. this computer is not set up to use Help me choose 4 Type the information from your Internet Service Provider ISP and click Connect to establish your LAN connection All in One PC m gt Wireless LAN 1 Go to Start gt Control Panel 2 Select Connect to the Internet under Network and Internet xm E3 gt Control Panel X Search Control Panel 5 Adjust your computer s settings View by Category Y e System and Security User Accounts and Family Safety NC Review your computer s status Add or remove user accounts Back up your computer w Set up parental controls for any user Find and fix problems Appearance and Personalization Network and Internet ay Change the theme i Connect to the Internet Change desktop background cat View network status and tasks Adjust screen resolution Choose homegroup and sharing options Clock Language and Region CF Hardware and Sound JE Change keyboards or other input methods IM View devices and printers Change display language Add a device AW Ease of Access kal Programs Let Windows suggest settings Uninstall a program Optimize visual display How do you want to connect al Wireless K Connect using a wireless router or a wireless network Broadband PPPoE 7 Connect using DSL or cable that requires a user name and password Show connection options that this computer is not set up to use Help me choose 4 A list of available WLAN conn
11. N System Power LED The power LED glows when the system is turned on and goes off when the system is shut down In terms of power saving the LED blinks in S3 Suspend to RAM mode and goes off in S4 Suspend to Disk mode Monitor Power LED The power LED glows when the monitor is turned on and goes off when the monitor is shut down Hard Disk Drive LED This indicator shows the activity status of the HDD It flashes when the system is accessing data on the HDD and remains off when no disk activity is detected System Power Button Press the system power button to turn the system on or off Monitor Power Mode Button This button works both as the monitor power button and as the signal input switch between PC amp HDMI Menu Enter Button Press this button to view the OSD menu or enter into the submenu Co Overview e o o o OQ e 0 e Up Volume Up Button In Menu mode this button indicates the cursor movement or OSD manual selection in incremental values Out of Menu mode it works as Volume Up button Down Volume Down Button In Menu mode this button indicates the cursor movement or OSD manual selection in decremental values Out of Menu mode it works as Volume Down button USB 3 0 Port Optional The USB 3 0 port is backward compatible with USB 2 0 devices It supports up to 5Gbit s SuperSpeed data transfer rate USB 3 0 Port with MSI Super Charger Technology Optional With MSI Sup
12. Options link Select a power plan that suits your personal needs You may also fine tune the settings by clicking Change plan settings All in One PC The Shut Down Computer menu presents the options of Sleep S3 S4 amp Shut Down S5 for rapid and easy management of your system power Power Management through ENERGY STAR qualified monitors Optional The power management feature allows the computer to initiate a ON low power or Sleep mode after a period of user inactivity When K used with an external ENERGY STAR qualified monitor this feature breti also supports similar power management features of the monitor To take advantage of these potential energy savings the power ENERGY STAR management feature has been preset to behave in the following ways when the system is operating on AC power Turn off the display after 15 minutes Initiate Sleep after 30 minutes Waking the System Up The computer shall be able to wake up from power saving mode in response to a command from any of the following m the power button m the network Wake On LAN m the mouse m the keyboard eS Energy Saving Tips Turn off the monitor by pressing the LCD power button after a period of user inactivity Tune the settings in Power Options under Windows OS to optimize your PC s power management Install power saving software to manage your PC s energy consumption Always disconnect the AC power cord or switch th
13. System Operations 4 You will be prompted to choose which drive you want to clean for a hard disk with multiple partitions 5 Now select either to remove files or to fully clean drives according to your needs 3 34 6 It is now ready to reset your PC click Reset and follow the on screen instructions to restart your PC Appendix A Troubleshooting N Troubleshooting My system does not start 1 Check if the system is connected to an electrical outlet and it is turned on 2 Check if the power cord and all cables are connected firmly When I turn on my computer the message Operating System not found appears or Windows does not start 1 Check if there is a non bootable CD DVD inside the optical disk drive If so remove the CD DVD then restart the computer 2 Check Boot Device Priority settings in the BIOS Setup The system can not be shut down It is best to shut down your computer using the Shut Down icon in the operating system Using other methods including those listed below may result in data failure If the Shut Down procedure does not work choose one of the following steps 1 Press Ctrl Alt Del keys then choose Shut Down 2 Press and hold the power button till the system is off 3 Unplug the power cable from the system My microphone does not work 1 For built in microphone please go to Start gt Control Panel gt Sounds and Audio Devices gt Audio to check if it is muted 2
14. System Recovery Discs For the first time use it is highly recommended that users create system recovery discs as the backup solution in the event of a catastrophic disk failure or other accidents Ee e Double click the BurnRecovery ko icon on the desktop to launch the Recovery Disc Creation Tool Follow the on screen instructions to create all recovery discs All in One PC m Recovering the System with the Recovery Discs This section is meant for users to restore your system with the recovery discs that you created beforehand Follow the instructions below to continue 1 Insert the recovery disc into the optical disc drive 2 Click Settings on desktop then select Change PC settings gt Update and recovery Settings PC settings Activate Windows PC and devices Accounts SkyDrive Search and apps Priva EE EE Available 67 iren Network Time and language a 0 Notifications Power Keyboard Ease of Access Change PC settings Update and recovery 3 Click Recovery gt Advanced startup and select Restart now to restart the system Update and recovery Refresh your PC without affecting your files If your PC isn t running well you can refresh it without losing your photos music videos and other personal files Windows Update File History Recovery Remove everything and reinstall Windows If you want to recycle your PC or start over completely you can reset it to
15. This option allows anyone with access to this computer to use this connection don t have an ISP Connect Cancel All in One PC Wireless LAN 1 Select Settings E on Desktop locate a wireless icon with available network 2 A list of available WLAN connections pops up Choose a connection from the list 3 To establish a new connection select Network and Sharing Center under Network and Internet in Control Panel Control Panel gt Network and Internet gt Panel H Deer EN Network and Sharing Center System and Security View network status and tasks Connectto a network View network computers and devices Network and Internet Q 2 HomeGroup Choose homegroup and sharing options Hardware and Sound Programs D Internet Options User Accounts and Family Connect to the Internet Change your homepage Manage browser add ons Safety Delete browsing history and cookies Appearance and Personalization Clock Language and Region Ease of Access 4 Select Set up a new connection or network 5 Followingly choose Manually connect to a wireless network and click Next to continue 6 Enter information for the wireless network you intend to add and click Next to proceed 2 amp Manually connect to a wireless network Network name Security type Choose an option Encryption type Hide characters 7 A new WLAN connection
16. actory default EF lt 4 The system recovery is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system m RECOVERY TOOL T b Recover to factory default Ls All in One PC 5 The following message indicates a successful system recovery Press OK to finish Restart the system and access the Windows operating system as usual If the recovery process fails or is interrupted please start the whole procedure all over again n FREcOVEeERY TOOL 7T JE Mu Tu ud Recover to factory defaull e CANCEL z N O System Operations System Recovery Windows 8 x The System Recovery Function is only available on systems bundled with Windows OS and MSI utilities by default The purposes for using the System Recovery Function may include Restore the system back to the initial status of original manufacturer s default settings When some errors have occurred to the operating system in use When the operating system is affected by virus and is not able to work normally m When you want to install the OS with other built in languages Before using the System Recovery Function please backup the important data saved on your system drive to other storage devices If the following solution fails to recover your system please contact the authorized local distributor or service center for further assistance Creating
17. and the master volume setting in the Audio Mixer are not muted 5 Check if the drivers are installed properly Click Start gt Control Panel gt System gt Device Manager 6 A dirty or scratched disc may cause the computer to hang when it is trying to read the disc If necessary reboot the computer remove the disc and check if it is dirty or scratched 7 Please use DVD player software like PowerDVD or WinDVD to play DVD video My DVD ROM drive tray does not open 1 Make sure the computer is turned on 2 Press the Eject button on the DVD ROM drive 3 If the Eject button does not work open the tray by inserting a sharp pointed object into the hole next to the Eject button System monitor does not display anything 1 Check if the system is connected to an electrical outlet and it is turned on 2 The system may be in Standby mode Press any key to activate the Display
18. asanakaqhusaskayaqkasant pkap aspha sapa 2 2 Hardware Setup E T a 2 3 System Operations 3 1 On Screen Display OSD Optional 3 2 On Screen Display OSD Optional 3 5 Power Management LLULLU LLA dirae Gades REEERE FRESKE TENNENE SEERA ORES 3 8 Network Connection Windows 7 a Ub HEURE 3 10 Network Connection Windows 8 x a a 3 13 system Recovery Windows 7 retten nnne nen eterne id 3 16 System Recovery Windows 8 X ccccccssesseeececeessseeeeceseeseeeeeseaeeeeeeeessenanseeeeses 3 26 A Troubleshooting eeees A 1 All in One PC m Copyright Notice The material in this document is the intellectual property of MICRO STAR INTERNATIONAL We take every care in the preparation of this document but no guarantee is given as to the correctness of its contents Our products are under continual improvement and we reserve the right to make changes without notice Trademarks All trademarks are the properties of their respective owners Revision Revision Date V1 0 2014 03 Preface Upgrade and Warranty Please note that certain components preinstalled in the prod
19. can refresh it without losing your personal files 1 Click Settings recovery on desktop then select Change PC settings gt Update and 2 Click Recovery Refresh your PC without affecting your files and select Get started Update and recovery Refresh your PC without affecting your files If your PC isn t running well you can refresh it without losing your photos music videos and Windows Update other personal files Get started File History Recovery Remove everything and reinstall Windows If you want to recycle your PC or start over completely you can reset it to its factory settings Get started Advanced startup Start up from a device or disc such as a USB drive or DVD change your PC s firmware settings change Windows startup settings or restore Windows from a system image This will restart your PC Restart now 3 It will show the changes which will be made during the process click Next to continue Refresh your PC Here s what will happen Your files and personalization settings won t change Your PC settings will be changed back to their defaults Apps from Windows Store will be kept Apps you installed from discs or websites will be removed A list of removed apps will be saved on your desktop Cancel p N E System Operations 4 A message indicates that your PC is ready to be refreshed click Refresh to start This might take a whi
20. devices are classified as CLASS 1 LASER PRODUCT Use of controls or adjustments or performance of procedures other than those specified is prohibited 2 Do not touch the lens inside the drive vill Preface CE Conformity Hereby Micro Star International CO LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive FCC B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection E against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the measures listed below m Reorient or relocate the receiving antenna m Increase the separation between the equipment and receiver m Connect the equipment into an outlet on a circuit different from that to which th
21. e receiver is connected m Consult the dealer or an experienced radio television technician for help Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Notice 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits VOIR LA NOTICE D INSTALLATION AVANT DE RACCORDER AU RESEAU This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation WEEE Statement Under the European Union EU Directive on Waste Electrical and Electronic Equipment Directive 2002 96 EC which takes effect on August 13 2005 products of electrical and electronic equipment cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the Sa end of their useful life Chapter 1 Overview This system is integrated in design selecting a stylish appearance with a mirror screen which displays the simplicity of modern individualism and the comfort of home With a touchscreen display flawless audio video capabilities and intuitive user interface it blends technology with life making computers easie
22. e wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption E System Operations Network Connection Windows 7 Wired LAN 1 Go to Start gt Control Panel 2 Select Connect to the Internet under Network and Internet s i S E3 gt Control Panel gt Search Control Panel Pp Adjust your computer s settings View by Category Y Lr System and Security User Accounts and Family Safety S D Review your computer s status SA dy Add or remove user accounts Back up your computer w Set up parental controls for any user Find and fix problems Appearance and Personalization Network and Internet ay Change the theme M Connect to the Internet Change desktop background lt View network status and tasks Adjust screen resolution Choose homegroup and sharing options Clock Language and Region CF Hardware and Sound Change keyboards or other input methods IM View devices and printers Change display language Add a device M MW Ease of Access E Programs Let Windows suggest settings B a Uninstall a program L Optimize visual display 3 Select Broadband PPPoE to connect using DSL or cable that requires a user name and password How do you want to connect Wirel E ireless Connect using a wireless router or a wireless network Broadband PPPoE P Connect using DSL or cable that requires a user name and password Show connection options that
23. ections pops up Choose a connection from the list or click Open Network and Sharing Center to establish a new connection d DN N m System Operations 5 To establish a new WLAN connection select Set up a new connection or network in Network and Sharing Center OT Seg gt Control Panel Network and Internet Network and Sharing Center Z Search Control Panel Control Panel Home E E 1 View your basic network information and set up connections Manage wireless networks iA x b See full map Change adapter settings MSI MSI saa Change advanced sharing This computer settings View your active networks Connect to a network You are currently not connected to any networks Change your networking settings lt Set up a new connection or network Set up a wireless broadband dial up ad hoc or VPN connection or set up a router or access point Es Connect to a network Connect or reconnect to a wireless wired dial up or VPN network connection Choose homegroup and sharing options Access files and printers located on other network computers or change sharing settings Troubleshoot problems Diagnose and repair network problems or get troubleshooting information See also HomeGroup Internet Options Windows Firewall 6 Followingly choose Manually connect to a wireless network and click Next to continue Choose a connection option Connect to the Internet Set up a wireless br
24. ecycling or special disposal he EH EJ 1k California USA The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California For further information please visit http www dtsc ca gov hazardouswaste perchlorate Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Preface Safety Instructions S Read the safety instructions carefully and thoroughly S All cautions and warnings on the equipment or user s manual should be noted Keep the User s Guide that comes with the package for future reference Keep this equipment away from humidity and high temperature Lay this equipment on a reliable flat surface before setting it up S Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100 240V before connecting the equipment to the power outlet Do not disable the protective earth pin from the plug The equipment must be connected to an earthed mains socket outlet 100 240V S Always unplug the AC power cord before installing any add on card or module to the equipment Always disconnect the AC power cord or switch the wall socket off if the equipment would be left unused for a certain time to achieve zero energy consumption ALITA The ventilator on the enclosure is used for air convection
25. er Charger Technology not only does it function as normal USB 3 0 port but it also enables users to charge USB devices even when the system is turned off Users will no longer need to power on the system just to charge USB devices Better yet it can reduce the charge time up to 4096 making life more efficient than ever B CAS Card Reader Slot Optional for Japanese ISDB T S only This slot is provided for B CAS Broadcast Satellite Conditional Access System card Card Reader Drive The built in card reader may support various types of memory cards Power Jack The AC DC adapter converts AC power to DC power for this jack Power supplied through this jack supplies power to the PC To prevent damage to the PC always use the supplied power adapter Optical Disk Drive A DVD Super Multi drive is integrated for your home entertainment Blu ray is optional Eject Hole Insert a thin straight object such as a paper clip into the eject hole to open the optical disk drive manually if the eject button does not work Eject Button Press the eject button to open the optical disk drive ODD LED If the ODD LED is on it means the system is reading data from or writing to a CD or DVD All in One PC m Component Replacement amp Upgrade Please note that certain components preinstalled in the product may be upgradable or replaceable by user s request depending on the models users purchased 7 N N
26. ful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take back policy All in One PC m Environmental Policy S The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life VA 8 Users should contact the local authorized point of collection for q recycling and disposing of their end of life products S visit the MSI website and locate a nearby distributor for further recycling information 8 Users may also reach us at gocontdev msi com for information regarding proper Disposal Take back Recycling and Disassembly of MSI products Chemical Substances Information In compliance with chemical substances regulations such as the EU REACH Regulation Regulation EC No 1907 2006 of the European Parliament and the Council MSI provides the information of chemical substances in products at http www msi com html popup csr evmtprtt pcm html Battery Information European Union Batteries battery packs and accumulators should not be disposed of as unsorted household waste Please use the public collection system to return recycle or treat them in compliance with the local regulations Taiwan R q For better environmental protection waste batteries should be collected separately for r
27. its factory settings Advanced startup Start up from a device or disc such as a USB drive or DVD change your PC s firmware settings change Windows startup settings or restore Windows from a system image This will restart your PC E System Operations 4 After booting up the following screen will pop up select Continue Choose an option Continue gt Exit and continue to Windows 8 1 Troubleshoot Refresh or reset your PC or use advanced tools Turn off your PC 5 Press any key to reconfirm the selection when the following message appears Press any key to boot from CD or DVD 6 The Windows OS starts loading files Windows is loading files P 7 The system recovery menu pops up Hard Disk Recovery will format the whole HDD All data on the HDD will be erased while all settings will be restored to manufacturer default Select Hard Disk Recovery only when your HDD is infected with fatal viruses and no solution can be found except a clear cleanup of the HDD f Hard Disk Recovery S J The whole hard disk will be formatted A Il the data will be defragmented and restored to factory default settings All in One PC m System Partition Recovery will format the C drive only Only the C drive will be restored to manufacturer default Other drives will not be affected It is highly recommended that users select System Partition Recovery to restore the system Only OS In
28. le Ready to refresh your PC This will take a few minutes and your PC will restart 5 After the refresh process ends you will be back to Windows Start Screen where you can find all default Windows utilities and widgets All in One PC m n Reset PC The Reset utility will bring the system back to original factory settings 1 Click Settings recovery on desktop then select Change PC settings gt Update and 2 Click Recovery gt Remove everything and reinstall Windows and select Get started Update and recovery Refresh your PC without affecting your files If your PC isn t running well you can refresh it without losing your photos music videos and files Windows Update other personal files Get started File History Recovery Remove everything and reinstall Windows If you want to recycle your PC or start over completely you can reset it to its factory settings Get started Advanced startup Start up from a device or disc such as a USB drive or DVD change your PC s firmware settings change Windows startup settings or restore Windows from a system image This will restart your PC Restart now 3 It will show the changes to be made during the process click Next to continue Reset your PC Here s what will happen All your personal files and apps will be removed Your PC settings will be changed back to their defaults 3 33 E
29. ll screen brightness E Contrast Adjusts difference between light and dark areas Brightness Contrast X Contrast Adjusts difference between light and dark areas 3 5 3 6 E System Operations Information Shows resolution refresh rate and product details Options I a Q j Information Shows resolution refresh rate and product details Menu Language function available under Monitor mode Changes language of menu Menu Language cl of menu Factory Default Resets monitor to Original settings i m 9 R Factory Default Resets monitor to original settings E gt v Options 83 08 UB Scaling Expands image to full screen After the settings are done ieee the Mode button to exit All in One PC m 2 Press the Up amp Down buttons to adjust the system volume 3 Press the Mode button to view the signal source Press it again to select PC HDMI monitor off mode The display is in PC mode press the button to switch to Panel Off mode The display is in Monitor mode press the button to switch to PC mode 3 7 Whenever any error takes place and incurs abnormal display or volume malfunction zz enter the OSD menu and reset your monitor to restore all settings to manufacturer default for optimal performance Options zm o Pei gt Factory Default Resets monitor to original settings
30. m Operations Resetting system Adjusting wide screen mode MODE Exit MENU Enter MODE Exit MENU Enter Wide Mode 2 Press the Up amp Down buttons to adjust the system volume 3 Press the Mode button to view the signal source Press it again to select PC HDMI monitor off mode Whenever any error takes place and incurs abnormal display or volume malfunction enter the OSD menu and reset your monitor to restore all settings to manufacturer default for optimal performance Tae TMA f TET TUER T i MODE Exit MENU Enter All in One PC m On Screen Display OSD Optional The on screen display OSD allows you to tune the viewing options of the monitor such as brightness contrast positioning language etc Mode Monitor Power Up Volume Up System Power Menu Enter Down Volume Down 1 Press the Menu button to launch the OSD main menu Use the Up and Down buttons to select the desired function menu and press the Menu button to enter Use the Up and Down buttons to select or tune the values to suit your personal preferences Brightness function available under Monitor mode Adjusts overall screen brightness Brightness Contrast 0 Brightness Adjusts overa
31. mediately Please do not switch off the power while the system backup cancellation is in progress mar RECOVERY TOOL SJA Backup System A qe N o E System Operations 5 The following message indicates a successful system backup Press OK to finish M RECOVERY TOOL oc OOF Backup System 2 rm CANCEL gt System Restore This tool helps to return the system to a previous state with the backup files that users created and saved in the hard disk drive beforehand If no backup files are available the system will be restored to the default setup Follow the instructions below to continue 1 Select Restore System to enter Alternatively select X or press Esc on the keyboard to exit mS REcovery TOOL OPA Des to select ENTER to confirm ESC to exit Recover to factory default Backup System Restore System All in One PC 2 Select OK or NEXT so that the system can recover to the previous backup or default setup Alternatively select CANCEL to stop the system restore immediately m With backup files restoring the system to the previous backup oN FRECOVERY TOOL ca rms r 5 Restore System e CANCEL m Without backup files restoring the system to the default setup n RECOVERY TOOL IAT ay NE OOF Restore System No image files in the backup g Select Next so that the system can recover to the default setup
32. ns This chapter provides you with essential information on system operations All information is subject to change without prior notice E System Operations On Screen Display OSD Optional The on screen display OSD allows you to tune the viewing options of the monitor such as brightness contrast positioning language etc System Power Menu Enter Down Volume Down Mode Monitor Power Up Volume Up 1 Press the Menu button to launch the OSD main menu Use the Up and Down buttons to select the desired function menu and press the Menu button to enter Use the Up and Down buttons to select or tune the values to suit your personal preferences After the settings are done press the Mode button to exit Adjusting contrast and brightness Adjusting color i i i MODE Exit MENU Enter MODE Exit MENU Enter Adjusting phase focus amp clock pitch MODE Exit MENU Enter MODE Exit MENU Enter HDMI in MODE Exit Deutsch Fran ais Espa ol Italiano ILARA ED All in One PC Adjusting screen position RETEST i n EN PSR neo II E MEN MODE Exit MENU Enter Adjusting OSD position amp timeout TU ee ESR GEE fi i ti It fend T i 1 zl ib MODE Exit MENU Enter Scenery mode TR a ES IE REED I i Way Riven MODE Exit MENU Enter Text LL Cinematic mu Syste
33. oadband or dial up connection to the Internet ju Set up a new network 2 b Configure a new router or access point Connect to a workplace Set up a dial up or VPN connection to your workplace 4 Setup a dial up connection EP Connect to the Internet using a dial up connection 7 Enter information for the wireless network you intend to add and click Next to proceed 8 A new WLAN connection has been made Click Close to exit or select Change connection settings to modify the WLAN settings All in One PC Network Connection Windows 8 x gt Wired LAN 1 Go to Start gt Control Panel 2 Select View network status and tasks under Network and Internet Control Panel Adjust your computer s settings View by Category v System and Security Review your computer s status Save backup copies of your files with File History Find and fix problems User Accounts and Family Safety Change account type w Set up Family Safety for any user Appearance and Personalization Change the theme Change desktop background Adjust screen resolution Hardware and Sound Clock Language and Region 9 e Network and Internet View network status and tasks Choose homegroup and sharing options gt gt T View devices and printers Add a language Add a device Change input methods Change date time or number formats Programs a Uninstall a program Ease of Access E Let Windows sugges
34. r and more fun to use suitable for the whole family N Overview Packing Contents All in One PC AC DC Adapter AC Power Cord User Manual Display Wiper amp Quick Guide e Keyboard Optional Mouse Optional Stylus Optional Please contact us immediately if any of the items is damaged or missing The illustrations are for reference only and your packing contents may slightly vary depending on the model you purchased All in One PC System Overview Front View o O O 0 Microphone The built in microphone can be used for video chatting online Webcam The built in webcam with the microphone can be used for picture taking video recoding online conferencing and any other interactive applications LED Indicator The LED indicator indicates when it is recording The LED indicator should be on when device is capturing video and off when the device is not capturing video Display The 27 inch Full HD display is with an optimal resolution of 1920 X 1080 pixels and standard proportion of 16 9 widescreen Stereo Speakers The built in stereo speakers deliver high quality sound blaster with stereo system Overview Rear View
35. r s back if available to support your back comfortably Place you feet flat and naturally on the floor so that your knees and elbows have the proper position about 90 degree when operating Put your hands on the desk naturally to support your wrists Adjust the angle position of the AIO PC to have an optimal view Avoid using your PC in a place where discomfort may occur such as on the bed The AIO PC is an electrical device Please treat it with great care to avoid personal injury All in One PC Hardware Setup Positioning Your System Place your system on a flat and steady surface such as a table or desk Pull the stand open until it snaps in place 713 degrees You can also tilt the monitor to an angle of between 13 and 45 degrees to suit your preference Proper positioning helps to reduce your eye strain and muscle fatigue as well e eee E CO DN Getting Started Connecting the AC Power 1 Assemble the AC DC adapter and the AC power cord 2 Plug the DC end of the adapter to the AIO PC 3 Plug the male end of the AC power cord to the electrical outlet Important We suggest that you connect the AC DC adapter to your AIO PC first and then connect the AC power cord to the socket outlet for safety concerns gt Powering on the System Press the power button to power on the system Chapter 3 System Operatio
36. stall drive will be formatted Other drives will not be affected OS Install drive will be restored to factory default settings 8 The system recovery will format your HDD partition Make sure that the important data have been backed up Click YES to continue click NO to stop the system recovery All files and settin ng E DS reset and los his computer Are yo u sure to continue vorm j gt 2 Click YES again to reconfirm click NO to stop the system recovery Please sure to continue again 9 DO NOT turn off the system power while performing the system recovery function or it may cause unknown damage to the system pere atir ystem Vindows 8 Elapsed Time O min 30 sec d i e E System Operations 10 The following message indicates successful system recovery Press OK to restart the system and access the Windows operating system as usual A Recovery Manager gt Ci Windows 81Recovery is successful Please press OK and restart P your system 11 If the recovery process is interrupted or failed please repeat the recovery procedures from the beginning All in One PC um Recovery from the Operating System Refresh PC The Refresh PC utility checks whether the system files Windows registry and other important system components are working fine or not on finding issues with Windows files it will attempt to repair your PC If your PC isn t running well you
37. t settings Optimize visual display 3 To establish a new connection select Network and Sharing Center 4 Select Set up a new connection or network gt F i gt Control Panel Network and Internet Network and Sharing Center View your basic network information and set up connections Control Panel Home Change adapter settings View your active networks You are currently not connected to any networks Change advanced sharing settings Change your networking settings Troubleshoot problems Diagnose and repair network problems or get troubleshooting information E System Operations 5 Choose Connect to the Internet 6 Select Broadband PPPoE to connect using DSL or cable that requires a user name and password onnect to the Interne How do you want to connect Broadband PPPoE xL Connect using DSL or cable that requires a user name and password Show connection options that this computer is not set up to use Cancel 7 Type the information from your Internet Service Provider ISP and click Connect to establish your LAN connection onnect to the Interne Type the information from your Internet service provider ISP User name Name your ISP gave you Password Password your ISP gave you Show characters Remember this password Connection name Broadband Connection Allow other people to use this connection
38. to select ENTER to confirm ESC to exit Recover to Backup omm Restore System factory default System Backup It is highly recommended that users back up the system as the solution in the event of a catastrophic disk failure or other accidents Follow the instructions below to continue 1 Select Backup System to enter Alternatively select X or press Esc on the keyboard to exit gt lt REcovery TOOL 5 t to select ENTER to confirm ESC to exit Recover to factory default Backup System Restore System E System Operations 2 Select BACKUP to start the system backup immediately i The Initial Backup The initial backup may take a while Please let it complete without interruption p FREcOVERY TOOL Estimated size of the image file 2 56G Disk space 1 68G BACKUP CANCEL m Subsequent Backups 3 18 Subsequent backups will replace the previous backup files d p REcoveRrY TOOL Y 5 Backup System f Estimated size of the image file 2 56G Disk space 1 68G Previous backup time 2011 10 10 09 32 02 previous backup file BACKUP CANCEL All in One PC 3 The system backup is in progress Please note that it may take a while Do not switch off the power or it may cause unknown damage to the system p REcovery TOOL OOF Backup System a e CANCEL 4 Alternatively select CANCEL to stop the system backup im
39. uct may be upgradable or replaceable by user s request For any further information about the product users purchased please contact the local dealer Do not attempt to upgrade or replace any component of the product if you are not an authorized dealer or service center since it may cause the warranty void It is strongly recommended that you contact the authorized dealer or service center for any upgrade or replace service Acquisition of Replaceable Parts Please be noticed that the acquisition of replaceable parts or compatible ones of the product users purchased in certain countries or territories may be fulfilled by the manufacturer within 5 years at most since the product has been discontinued depending on the official regulations declared at the time Please contact the manufacturer via http support msi com for the detailed information about the acquisition of spare parts Technical Support If a problem arises with your system and no solution can be obtained from the user s manual please contact your place of purchase or local distributor Alternatively please try the following help resources for further guidance S visit the MSI website for technical guide BIOS updates driver updates and other information via http www msi com service download S8 Contact our technical staff via http support msi com Green Product Features S Reduced energy consumption during use and stand by Limited use of substances harm
40. y Technology The High Definition Multimedia Interface HDMI is an all digital audio video interface capable of transmitting uncompressed streams HDMI supports all TV format including standard enhanced or high definition video plus multi channel digital audio on a single cable With MSI Instant Display Technology when you connect power to the AIO PC successfully the monitor will automatically enter stand by mode without pressing the power button When devices are connected to the HDMI in port the monitor will be turn on immediately You can also switch the modes through the Monitor Power Mode Button on the side panel if you have already turned on your AIO PC This technology helps saving more energy for your system HDMI Out Port Optional Kl JM l ITION MULTIMEDIA INTERFACE The High Definition Multimedia Interface HDMI is an all digital audio video interface capable of transmitting uncompressed streams HDMI supports all TV format including standard enhanced or high definition video plus multi channel digital audio on a single cable Please refer to the printed icon on the chassis for the exact position of HDMI In Port and HDMI Out Port VGA Port Optional The DB15 pin female connector is provided for VGA interface device O gt Overview D LAN Jack The standard RJ 45 LAN jack is provided for connection to the Local Area Network LAN You can connect a network cable to it
Download Pdf Manuals
Related Search