Kramer Electronics VM-1H4C
Contents
1. 520 x 320 mm 24 0 in Power management Standby Suspend Active off sleep Extension blocs 1 CEA EXT Color characteristics Default color space Display gamma 2 20 Red chromaticity Rx 0 674 Ry 0 319 Green chromaticity Gx 0 188 Gy 0 706 Blue chromaticity Bx 0 148 By 0 064 White point default Wx 0 313 Wy 0 329 Additional descriptors None Non sRGB Timing characteristics Horizontal scan range 30 83kHz Vertical scan range 56 76Hz Video bandwidth 170MHz CVT standard Not supported GTF standard Not supported Additional descriptors None Preferred timing Yes Native preferred timing 1280x720p at 60Hz 16 10 Modeline 1280x720 74 250 1280 1390 1430 1650 720 725 730 750 hsync vsync Standard timings supported 720 x 400p at 70Hz IBM VGA 640 x 480p at 60Hz IBM VGA 640 x 480p at 75Hz VESA 800 x 600p at 60Hz VESA 800 x 600p at 75Hz VESA 1024 x 768p at 60Hz VESA 1024 x 768p at 75Hz VESA 1280 x 1024p at 75Hz VESA 1280 x 1024p at 60Hz VESA STD 1600 x 1200p at 60Hz VESA STD 1152 x 864p at 75Hz VESA ST VM 1H4C Default EDID LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered2. e Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer VM 1H4C away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may be connected only to other equipment that is installed inside a building Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing VM 1H4C Getting Started 2 3 2 4 Shielded Twisted Pair Kramer engineers have developed special shielded twisted pair cables to best match our digital twisted pair products the Kramer BC DGKat524 CAT 5 24 AWG the Kramer BC DGKat623 CAT 6 23 AWG and the Kramer BC DGKat7a23 CAT 7a 23 AWG cables These specially built cables significantly outperform regular CAT 5 CAT 6 CAT 7a cables The VM 1H4C supports a range of up to e Up to 90m 295ft at 1080i or up to 30m 98ft at 1080p on shielded BC DGKat524 cable
3. IR Line Receiver Figure 1 defines the front and rear panels of the VM 1H4C GO POWER INPUT SEEDIDA U iii READ SELECT 12 3 4 o O o O O amp 006 REMOTE IR 1 4 HDMI Over CATS DA VM 1H4C Out 1 OuT 2 Our3 Out 4 Pr aye 3c 4 Figure 1 VM 1H4C 1 4 HDMI Over CAT 5 DA Front and Rear Panels Feature Function POWER LED Lights green when the unit receives power ja muri IR 3 5mm Mini Jack Connect to the remote IR emitter or receiver INPUT LED Lights green when the input receives a signal Flashes when connected but there is no active signal READ Button Press to capture the EDID from the active output see EDID Section 6 SELECT Button Button Press to select the output from which to capture the EDID a OUTPUT 1 4 LEDs The relevant LED lights green when that output is connected INPUT HDMI Connector Connect to the HDMI source RS 232 9 pin D sub Connect to an RS 232 controller see Section 5 1 Connector OUT1 4 TP Output Connect to the LINE IN RJ 45 connector on the TP receivers RJ 45 for example TP 574 see Section 7 Connectors 12V DC Power Connector Connect to the 12V DC power adapter Center pin positive VM 1H4C Defining the VM 1H4C 1 4 HDMI Over CAT 5 DA 5 Connecting the VM 1H4C Always switch off the power to all devices before connecting them to your VM 1H4C IR Remote Controller LL ODE 2E22322922932933 To TP acceptors HDMI for exampl
4. This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons eguipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is c
5. e Up to 90m 295ft at 1080i or up to 70m 230ft at 1080p on shielded BC DGKat623 cable e Up to 100m 330ft at 1080i or up to 90m 295ft at 1080p on shielded BC DGKat7a23 cable You can daisy chain up to six DigiKat devices with the maximum overall distance between the first and last devices being cumulative and limited to 500m About the Power Provision Feature Only the VM 1H4C needs to be connected to a power source when the devices are within 90m 270ft of each other the VM 1H4C can provide power to the receiver over the TP cable This feature applies as long as the cable can carry power and the distance does not exceed 90m on standard TP cable For longer distances heavier gauge cable should be used standard TP cable is still suitable for the video audio transmission but not for feeding the power at these distances 2 5 Recycling Kramer Products The Waste Electrical and Electronic Eguipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by reguiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at htto www kram
6. Green White 4 Blue 5 Blue White 6 Green 7 Brown White 8 Brown SEES Pair1 4and5 Pair 2 1 and 2 Pair3 3and6 Pair 4 7 and 8 Warning Using a TP cable that is incorrectly wired may cause permanent damage to the device VM 1H4C Wiring the Twisted Pair RJ 45 Connectors 8 Technical Specifications INPUTS 1 HDMI connector 1 IR on a 3 5mm mini jack 1 RS 232 on a 9 pin D sub connector OUTPUTS 4 TP on RJ 45 connectors BANDWIDTH Supports up to 4 95Gbps 1 65Gbps per graphic channel COMPLIANCE WITH HDMI STANDARD Supports HDMI and HDCP INDICATOR LEDS Power INPUT OUTPUT 1 2 3 and 4 POWER CONSUMPTION 12V DC 2A OPERATING 0 to 40 C 32 to 104 F TEMPERATURE STORAGE TEMPERATURE 40 to 70 C 40 to 158 F HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 21 5cm x 16 2cm x 4 4cm 8 5in x 6 38in x 1 7in W D H WEIGHT 0 9kg 1 98lbs approx ACCESSORIES Power supply OPTIONS HDMI HDMI male to male cables RK 1 19 rack adapter 9 Default EDID The factory default EDID is listed below Monitor Model name Manufacturer Plug and Play ID KRM0114 Serial number 505 707455010 Manufacture date 2009 ISO week 10 EDID revision 1 3 Input signal type Digital Color bit depth Undefined Display type RGB color Screen size
7. KRAMER ELECTRONICS LTD USER MANUAL MODEL VM 1HAG 1 4 HDMI Over CATS DA P N 2900 300133 Rev 4 osi H4C 1 4 HDMI Over CAT5 DA Quick Start Guide ae This guide helps you install and use your product for the first time For more detailed information go to 2 http www kramerelectronics com support product_downloads asp to download the latest manual or scan ope h the QR code on the left Step 1 Check what s in the box A VM 1H4C 1 4 HDMI Over CAT5 DA 4 1 Quick Start Guide K Power adapter 12V DC 2 4 Rubber feet Step 2 Connect the inputs and outputs Always switch off the power to all devices before connecting them to your VM 1H4C Step 3 Connect the power r Connectthe poweradapter tothe VM 1H4C and plug the adapter into the mains electricity Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Shielded Twisted Pair 2 4 About the Power Provision Feature 2 5 Recycling Kramer Products 3 Overview 4 Defining the VM 1H4C 1 4 HDMI Over CAT 5 DA 5 Connecting the VM 1H4C 5 1 Connecting a Controller to the RS 232 Port 6 Acguiring the EDID 7 Wiring the Twisted Pair RJ 45 Connectors 8 Technical Specifications 9 Default EDID Figures Figure 1 VM 1H4C 1 4 HDMI Over CAT 5 DA Front and Rear Panels Figure 2 Connecting the VM 1H4C Figure 3 TP Pinout Wiring GOON OD A KOONNDN a oo N O Introduction Wel
8. NUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your guestions comments and feedback Web site ww
9. come to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unigue creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Thank you for purchasing the Kramer VM 1H4C 1 4 HDMI Over CAT 5 DA which is ideal for e Home theater presentation and multimedia applications e Rental and staging 2 1 2 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual to check for up to date user manuals application programs and to check Go to http www kramerelectronics com support product_downloads asp if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance
10. e TP 574 HDMI IR Line Receiver DVD Player Figure 2 Connecting the VM 1H4C Warning Using a TP cable that is incorrectly wired may cause permanent damage to the device To connect the VM 1H4C as illustrated in the example in Figure 2 1 Connect the HDMI source for example a DVD player to the Input HDMI connector 2 Connect the TP RJ 45 outputs to up to four TP acceptors for example TP 574 VM 1H4C Connecting the VM 1H4C 3 Connect the front panel remote IR 3 5mm mini jack to the IR device for example an IR emitter Note All data is passed simultaneously to all four TP outputs 4 Optional Connect to a serial controller for example a computer to the RS 232 9 pin D sub connector 5 1 Connecting a Controller to the RS 232 Port To connect a controller to the device via the RS 232 serial port e Ifthe controlled device requires a crossed connection use a straight cable from the computer to the transmitter and use a straight cable from the receiver to the device e Ifthe controlled device requires a straight connection use a straight cable from the computer to the transmitter and use a crossed cable from the receiver to the device VM 1H4C Connecting the VM 1H4C Acguiring the EDID The VM 1H4C is programmed with a default EDID see Section 9 This lets you connect the power before having to connect one of the acceptors To change this default EDID you must acquire the new EDID fro
11. e refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAG
12. ent Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming reguired for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will b
13. erelectronics com supportrecycling Overview The high quality VM 1H4C is a distribution amplifier for HDMI IR and bidirectional RS 232 signals over TP Twisted Pair cable It reclocks and egualizes the input signal and distributes it to four TP outputs simultaneously More specifically the VM 1H4C Supports up to 4 95Gbps data rate 1 65Gbps per graphic channel Can read and store the default EDID or the EDID block from one or a mix of the output display devices in non volatile memory so it can then provide the EDID information to the source even if the display device is not connected Displays the video output on all of the four outputs at the same time once they are ready to display the output upon power up Features EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling amp processing algorithm ensures Plug and Play operation for HDMI systems Supports 3D Pass through x v Color and uncompressed audio channels Dolby TrueHD DTS HD Is HDCP compliant Features LEDs indicating a live input and the active output Has a remote IR 3 5mm mini jack that supports bidirectional IR signals Supports bidirectional RS 232 serial data Is 12V DC fed and is housed in a Kramer Desktop enclosure 4 Defining the VM 1H4C 1 4 HDMI Over CAT 5 DA The VM 1H4C encodes the HDMI IR and RS 232 signals and transmits them over TP cable to a compatible receiver for example the Kramer TP 574 HDMI RS 232
14. m a display device You can acquire the EDID from One of the connected outputs the relevant output LED lights The default EDID all output LEDs light Up to four connected outputs using the Auto mix Mode all output LEDs light in a running pattern This is usually done only once when the machine is being set up in an installation Once acquired the EDID is saved in non volatile memory and further acquisition is not necessary To acquire the EDID Connect the output s from which you want to acquire the EDID see Section 5 Press the EDID SELECT button briefly The device enters the EDID programming mode Press the EDID SELECT button repeatedly until the required EDID is indicated based on the patterns described above Press the EDID READ button The relevant LEDs flash in a pattern for a few seconds as follows Slowly and then no longer lights The EDID was successfully read Quickly and then no longer lights The EDID was not read and the default EDID was stored Acquiring the EDID 3 Wiring the Twisted Pair RJ 45 Connectors When using STP cable connect solder the cable shield to the RJ 45 connector shield Figure 3 defines the TP pinout using a straight pin to pin cable with RJ 45 connectors Note that the cable Ground shielding must be connected soldered to the connector shield EIA TIA 568B Figure 3 TP Pinout Wiring PIN Wire Color 1 Orange White AH 2 Orange 3
15. overed under this limited warranty This limited warranty is not transferable to subseguent purchasers or owners ofthis product What Kramer Electronics will do Kramer Electronics will atits sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you Ifthis product is returned uninsured you assume all risks of loss or damage during shipm
16. w kramerelectronics com KRAMER E mail info Okramerel com SAFETY WARNING Disconnect the unit from the power e supply before opening and servicing P N 2900 300133 Rev 4
Download Pdf Manuals
Related Search