Amica PGXZ6611 hob
Contents
1. bibh 3 Fig 2 TECHNICAL DATA heigh 87 mm depth 500 mm width 580 mm weight of the cooker 8 5 kg The cooker is equipped with burners 1 WOK burner heat load 2 8 kW 2 small burner heat load 1 kw 3 medium burners heat load 1 8 kW Appliance class ll The cooker is equipped with a pipe terminal 1 2 ISO 228 1 INSTALLATION Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible Location The kitchen must be dry and well ventilated The kitchen should have a ventilation system including fume exhaust to remove the gases generated by burning gas and direct them out That system shall comprise a ventilation grill or a hood Please install hods in accordance with the manufacturers instructions e Fresh air is necessary to ensure gas burning Minimum gas requirement for the cooktop is 2 cbm per hour per each 1 kW of the burners capacity The air can be supplied either directly from the outside by an at least 100 cm duct or directly from the adjacent rooms provided these are equipped with ventilation system routed to the outside of the building The minimum distance be2. e ke QQ 45 PVG4 0ZpZtR PGX 6610 PVG4 1ZpZtRC PGXZ 6611 INSTRUCTION MANUAL DEAR CUSTOMER Outstanding user friendliness and excellent efficiency make cooktops a perfect choice Please read this manual thoroughly before you start to use the appliance to avoid any trouble The cooktop s safety and functionality was checked at the factory test stations prior to di spatch Please read this manual carefully before you start to use this cooktop This way you can ensure its proper and correct operation Please preserve this manual and store it near the appliance so that it is available at all times for reference Observe the instructions contained herein to prevent accidents Note Do not start to use the appliance before you have read and understood the instruc tions This equipment has been designed solely as a cooking appliance It is strictly pro hibited to use it for any other purpose e g heating Using the appliance for other purposes can be dangerous The manufacturer reserves the right to introduce modifications which will not affect the functionalities and operation of the appliance TABLE OF CONTENTS Basic information cccceeeeeeee eee eee eee eee eee neces nro eseesaeeesenseeseneeeaeseeeneseeensanseesaeeesa 2 Important safety INStrUCtIONS ci cecceee eee eee eee e ete esate ene e ne neeenenenenenene 4 HOW 10 SAVE OOOO Vicio E EE AT EEEE E E AREF 5 UNPackINd ese td 5
3. Disposal Of AN Old AappllaCO seneso en diarias 5 Guide to the COOktOP occoonnnnccccconnncnnononanncnnononannnnnnnnnnnnnn nn cnn nr nn rana rrnn nana rre rn cnn 6 7 SPECITICAIONS cociente nin A 6 7 Installation AA daa aiii 8 A O 8 Notes tor the technical rose 10 Operationen sesh a ce te tetas sata a A A SA satan see domesteascatecsssdedteasy 11 Setting the Gas ty PC ries teseic smart onn PAE RARA RAR RES 11 Valve adjustments a E a calera 13 Flame Selec oc dci 14 S it ble panssaria e aa daa ancd ante emecbaceneelsdancheshgekaredeaca gees 15 Cleaning and MaiNteNANCe cccceeceeeeeeeeeeeeeeeeeeeeeeeeeneeeneaeeesaeeeeeseeeeeeeeenseneeens 18 TOP DUNNE Sui A 18 WORK panel la 18 Troublesh otiNg secreet eaaa E dde at 19 GUALANfOC ooooncccnnnnnnncnnncnnnnonnnnnnnnnnnr nn cnn nn rro n narrar rn rc 20 SAFETY INSTRUCTIONS Do not leave children unattended in an area where the appliance is in use e Donotallow persons of limited physical sensual or psychical capabilities or persons whose experience in operating similar appliances is limited to operate the cooktop unless if attended by adult caretakers Make sure no part of the power cord comes in contact with hot parts of the cooktop e Leave sufficient space around the socket to ensure the power plug is accessible easily after installation Do not install the cooktop near cooling appliances Do not leave the cooktop unattended while in use Boil overs cause smoking and g
4. and correct operation of all the functional elements Adjust the settings of the gas control knobs with the washers included to ensure the igniters work properly and the entire system is leak proof Check the operation of the igniters and leak seal remove the knob if working incorrectly and adjust bi introducing washer s onto the valve spindle check the operation of the igniters and leak seal secure the system with a tight washer and put the knob handle on Issue a certificate of connecting the appliance and inform the user of the operating activities NOTE Installation and service must be performed by a qualified and licensed instal ler service agency or gas supplier All the relevant safety regulations must be observed The cooktop is equipped with an R1 2 connecting pipe for gas connection If the appliance is intended for use with LPG propane butane a Y 8 x 1 mm hose coupling is threaded onto the connector Make sure the gas connecting pipe does not come in contact with the metal components of the cooktop A TS All the couplings and joints must be tightly sealed i e i i Note After connecting the appliance check all fittings for gas leaks e g with soapy water a AA Do not check the fittings with open fire fi a i i 10 OPERATION A i Please make sure you have read and understood the entire operating manual Do follow the instructions to ensure safe and effective operation
5. mechanical appliances which cause sparking If you smell gas close the supply valve immediately and ventilate to kitchen thoroughly Then call an authorized technical to remove the malfunction Power supply of the cooktop must be disconnected at all times when a malfunction occurs Then report the appliance for an authorized service Do not connect antenna cords e g radio antennae to the gas pipes Ifthe gas leaking from the piping network has ignited close the gas supply immediately by closing the mains supply valve e Ifthe gas leaking from a container has ignited cover the contained with a wet blanket and close the container valve immediately After the container has cooled down take it outdoor It is strictly prohibited to use the failed container again e Close the mains supply valve if a brake of a couple of days in the usage of the appliance is expected Close the valve each time after the use of the appliance if your cooktop is connected to a gas container Caution Should the permanently sealed supply cord break have it replaced by the manufacturer or by a specialized repair shop or by a duly qualified technician Heat and moisture is generated in the kitchen when the unit is used for cooking baking roasting Make sure the ventilation is sufficient in the kitchen Keep the passive ventilation openings unobstructed and clean or install active ventilation a hood with exhaust fan Additional ventilation may
6. A After you have converted the cooktop to another gas type make sure you have 4 placed a label containing that information on the appliance Adjustment of the reduced valve flow Table 2 Converting the Converting the co cooktop from LPG oktop from natural to natural gas gas to LPG Full flame Replace the burner Replace the burner nozzle according nozzle according to the guidelines in to the guidelines in Regular burners table 1 table 1 Saving flame Loosen the adjust Loosen the adjust ment spindle see ment spindle see fig 7 and adjust the fig 7 and adjust the flame flame 12 OPERATION Valve adjustment Valve adjustment should be done with the control knob set at Burner ON saving flame po sition Remove the knob and adjust the flame with a tiny screwdriver see fig 7 below Fig 7 Checking the adjusted flame heat the burner at full open position for 10 minutes Then turn the knob into the saving setting The flame should not extinguish nor move to the nozzle If it goes off or moves over to the nozzle readjust the valves Note It is up to the used to request converting the appliance to another gas type if so required by the local conditions at a licensed gas fitter service 13 OPERATION Flame selection At the burners adjusted correctly the flames should be light blue and the inner cone should be clearly visible The size of flame depends on the position of the
7. amper i gas flow and produce an incorrect burner flame i a Work panel m Clean the enamel coated work panel only with warm water with a mild solution of dishwashing liquid Use mild dish washing liquids to remove otherwise resistant contamination m Clean the stainless steel panel thoroughly before you start to use the appliance Particularly remove the remaining of the protective foil adhesive and packaging tape adhesive Clean the cooktop regularly each time after use Do not allow the work panel to become very dirty especially do not let spill over stains to remain on the surface for long We recommend Stahl Fix cleaning agent for preliminary and regular cleaning of the cooktop 18 CLEANING AND MAINTENENACE Periodic inspections In addition to current maintenance and care the following shall be arranged for e Periodic inspections of control elements and units of the cooktop Upon expiration of the warranty service department shall be ordered technical inspections of the appliance at least once every two years All operation faults must be repaired e Cooktop units shall be maintained according to the maintenance schedule TROUBLESHOOTING In each case proceed as follows Turn the burners off e Disconnect power supply e Report for repair The user can fix some minor malfunctions himself according to the guidance given in the tables below Please check the information below before contacting the service depart
8. be necessary if the appliance is used often and or for a long time Enhance the capacity of the active ventilation system if needed HOW TO SAVE ENERGY Using energy in a respon sible way not only saves money but also helps the environment So let s save energy And this is how you o can do it Use appropriate cookware flat and thick bottom pots and pans will reduce power consumption by up to one third Do not for get to use lid to reduce power consumption by four times m Select properly sized cookware make sure the diameter of the pan or pot is not smaller than the size of the burner m Keep the burner surfaces and the co okware bottoms clean Residues hinder heat transfer and lasting contamination can be removed only by extremely harmful chemicals Particularly the flame slots of the burners must be kept clean at all times Do not put up the cookware lids unless really necessary m Do not install the cooktop adjacently to fridges freezers this increases power consumption of the cooling appliances UNPACKING During transportation pro tective packaging was used to protect the appliance against any damage After a unpacking please dispose of all elements of packaging in a way that will not cause damage to the environment All materials used for packaging the applian ce are environmentally friendly they are 100 recyclable and are marked with the appropriate symbol Caution D
9. he medium burner the most suitable pot will be 140 220 mm in diameter For the large burner the most suitable pot will be 200 240 mm in diameter For the WOK burner the most suitable pot will be 220 260 mm in diameter The height of the pot should not be larger than its diameter Yes Lids Using a lid while cooking will minimize the loss of heat and decrease the cooking time 15 OPERATION Using cooktops with control knob ignition Zp e Press the selected control knob and turn anti clockwise into Burner ON large flame position e Hold depressed until gas is on fire e Release the knob and set the required flame size Using cooktops with leak protection Zt ip S A spark igniter protection Hold the burner s control knob depressed for approx 10 seconds in Burner ON large flame position This way you activate the protection device Repeat the attempt if the protection has not activated for the first time A Leak protection will cut off the gas supply if there is no flame for approx 60 j seconds A At the Zt cooktops the gas supply to the burners is adjusted with the knobs equipped with the leak prtection 16 OPERATION What to do if surplus gas leak occurs 1 gas network 2 gas cut off valve A valve ON B valve OFF Fig 9 In any emergency proceed as follows turn the burners off set the cut off valve OFF see fig 9 B ventilate the kitchen report the u
10. ment PROBLEM cause REMEDIES 1 The appliance does not power cut check the home power fuse work replace if needed 2 Burner will not ignite flame slots contaminated close the gas cut off valve close burner control knobs ventilate the kitchen take the burner out of the cooktop blow and clean the flame slots 3 Igniter does not work power cut check the home power fuse replace if needed gas supply break open gas cut off valve contaminated caked igni clean the igniter ter control knob released too hold the control knob de soon pressed until the flame goes on and persists 4 Burner extinguishes control knob released too hold the control knob de soon pressed until the flame goes on and persists 19 GUARANTEE Guarantee Guarantee service will be granted as per the Guarantee Certificate The manufacturer cannot be held responsible for any damage caused by improper use or operation of the appliance Please copy the cooktop type and manufacturing number from the nameplate WP pire Peper a reece Manufacturing NUM Amica Wronki S A ul Mickiewicza 52 64 510 Wronki tel 67 25 46 100 fax 67 25 40 320 www amica com pl 10 00611 4 02 2013
11. nit for repair at a service department of a licensed and authorised repair shop refrain from using the appliance until it is returned to its operating condition NOTE The user can fix some minor malfunctions himself by following the instructions given in this manual The burner does not ignite and gas is smelled Close burner control knobs Close the gas mains supply cut off valve Ventilate the kitchen Take the burner out of the cooktop Clean and blow the slots Insert the burner back in place Resume ignition attempt If the burner still fails to go on report for a licensed repair 17 CLEANING AND ROUTINE MAINTENANCE Daily cleaning and proper maintenance have crucial impact on the durability of your ceramic plate Clean the ceramic plate observing the same rules as for glass Never use abrasive or aggressive clean ing agents scrubbing powders or scratching sponges A AA fe Burners the burner hob grate e Inthe case of soiled burners and grate these elements must be removed from the cooker and washed with warm water and washing up products intended for fats and soils Next wipe them dry After the grate has been removed wash the burner hob carefully and wipe with a dry and soft cloth In particular ensure flame openings in rings under caps are clean see the figure below Do not use steel wire or drill holes Burner elements must always be Fig 10 Hi A clean Water particles may h
12. of your cooktop NOTE The appliance uses gas which is a flammable and explosive substance Thus it is necessary for the cooktop to be connected to a gas network which supplies the gas type for which the appliance is suitable Installation and service must be performed by a qualified installer service agency or gas supplier Please check the type plate for the information concerning the suitable gas type for your appliance Converting the unit to another gas type Only a licensed and authorised technician may carry out this job If the available gas type is different from that provided in the type plate of the appliance G 20 GZ 50 20 mbar the burner nozzles should be replaced and flame adjusted A AN NOTE The cooktops delivered by the supplier come with the burners which are suitable for burning the type of gas which is quoted in the type plate and in the guarantee certificate The type plate is fitted at the bottom panel of the appliance The following must be carried out if converting to another gas type is required nozzles must be replaced see assembling table reduced valve flow rate must be adjusted Converting the unit to another gas type Table 1 Gas type Nozzle diameter Sman Medium Large wok dl OPERATION Replacement of burner nozzle loosen the nozzle with a dedicated wrench 7 Fit the new nozzle suitable for the required gas type see table above for reference
13. reasy spill overs may ignite e Execute caution when the food is boiling Boil overs may flood the burner Should a malfunction occur stop using the appliance Do not start to use your cooktop before a trained technician has repaired it Make sure all the burners are closed before opening the main gas valve at the network or container connection Prevent burners from flooding or contamination Clean the burners and let dry immediately after they have cooled down Do not place cooking pans directly onto the burners Maximum weight of a pan to be placed over a single burner is 5 kg The overall maximum load of a pan that is to be placed over the entire grate is 10 kg Do not place a single pan over two burners at the same time Do not impact the burners and knobs e Itis prohibited to modify or repair the cooktop by persons who do not possess appropriate training and qualifications Do not set the burner knobs open before you have stricken the match or the ignition appliance Do not extinguish the flame by blowing The user is not allowed to convert the cooktop to another gas type relocate the appliance or modify the supply network himself Only a duly authorized and trained technician is allowed to carry out these activities WHAT TO DO IF YOU SMELL GAS Do not strike matches do not smoke cigarettes etc do not turn on off any electrical applian ces including doorbell or a lamp do not use any other electrical or
14. related burner control knob Fig 8 e Burner OFF Burner ON large flame Burner ON small flame saving mode See also fig 8 for various operating options flame size selection the burner should be set at a large flame during the initial phase of cooking to bring the food to boiling and then the knob should be turned to the saving flame position to maintain the cooking It is also possible to adjust the flame size stepless A l Itis prohibited to adjust the flame in the range between the Burner OFF and _ _ Burner ON large flame positions 14 OPERATION Significant quantities of energy can be saved if the appliance is used correctly parameters set correctly and appropriate cookware is used The savings can be as follows Up to 60 per cent savings when proper pots are used Up to 60 per cent savings when the unit is operated correctly and the suitable flame size is chosen It is a prerequisite for efficient and energy saving operation of the cooktop that the burners are kept clean at all times in particular the flame slots and nozzles Suitable pans Selection of vessels Bear in mind that the diameter of the pot must be at least slightly larger than that of the flame Cover the pots with lids It is recommended to use pots the diameters of which exceed the diameters of the flame by 2 5 3 times For the small burner the most suitable pot will be 90 140 mm in diameter For t
15. tween the burners and the hood exhaust should be 750 mm see fig 3 Fig 3 850mm INSTALLATION Installation of the cooktop e Prepare the work top cut out as shown in the diagram see fig 5 e Remember to maintain the minimum safety distances to combustible surfaces below the cooktop of 130 mm e Fix the tape included to the cooktop edge at the bottom side of the appliance e Connect the appliance to gas and electrical mains as per the operating manual e Remove any dust from the work top remove the protective backing of the tape insert the cooktop into the cut out and press firmly downwards e Set the fixing brackets see fig 4 perpendicular to the cooktop edge fix firmly e Test the correct operation of the installed cooktop In particular check the correct operation of the sealing protection and the ignition system Fixing the brackets to the work top Fig 4 1 Work top 2 4 screws 3 4 fixing brackets 4 Installed appliance 1 3 2 4 Installation in kitchen furniture Fig 5 INSTALLATION Notes for the technician The fitter should Bear a valid certificate of gas permit Have studied the contents of the appliance s type plate containing the suitable type of gas Compare the data with the characteristics of the gas available in the network Check the following ventilation capacity incl air exchange in the kitchen tightness and sealing of the gas fittings effectiveness
16. uring unpacking the packaging materials polythene bags polystyrene pieces etc should be kept out of reach of children DISPOSAL OF THE APPLIANCE Old appliances should not sim ply be disposed of with normal household waste but should be delivered to a collection and recycling centre for electric and electronic equipment A symbol MU shown on the product the in struction manual or the packa ging shows that it is suitable for recycling Materials used inside the appliance are recyclable and are labelled with information concerning this By recycling materials or other parts from used devices you are making a significant contribution to the protection of our environment Information on appropriate disposal centres for used devices can be provided by your local authority GUIDE TO THE COOKTOP gt PLATE PVG4 0ZpZtR PGX 6610 1 2 3 surface burners 4 surface burner knobs 5 grid A O10 LO Aq 6 a a d Fig 1 TECHNICAL DATA heigh 87 mm depth 500 mm width 580 mm weight of the cooker 6 5 kg The cooker is equipped with burners 1 large burner heat load 2 8 kW 2 small burner heat load 1kW 3 medium burners heat load 1 8 kw Appliance class ll The cooker is equipped with a pipe terminal 1 2 ISO 228 1 GUIDE TO THE COOKTOP D PLATE PVG4 1ZpZtRC PGXZ 6611 7 1 2 3 surface burners i i i i 4 surface burner knobs 5 5 grid
Download Pdf Manuals
Related Search