Home

TechniSat 0000/4730 TV set-top boxe

1. 10 Function Selection gt Press the Navigator Function Selection button to open the Navigation menu NAV menu in order to select the desired function Radio Iniernet Movies DVR Music Pictures Back Use the up down arrow buttons to highlight the function you want to access TV Radio Internet Films DVR Music Images TV mode playing TV programmes Radio mode playing radio programmes Internet mode calls up the web links available in the Internet list Films DVR Navigator access available video files stored on a device connected to the USB port or on an available network drive or via UPnP Music navigator access available music files stored on a device connected to the USB port or on an available network drive or via UPnP Image navigator access available image files stored on the internal hard drive on a connected USB device on a shared network drive or via UPnP Confirm with OK to select the highlighted function When doing so pay careful attention to the information and settings for global and user dependent parental control in section 16 of your operating manual 43 11 Using the Internet list to call up websites gt In normal mode press the WWW button twice or gt If a website has already been opened press the WWW once The Internet List Navigator now appears The web link last called up is highlighted gt amem mn SEE i gt You can now highligh
2. Automatic updates Films DVR Music Images Internet HbbTV watchmi Mobile apps UPnP renderer WLAN direct TechniCast EPG Timer E Access to various menus is also blocked however it is still possible to access the menu for the purpose of deactivation g ISI mode can also be used with the IsiZapper remote control which is optimised for ISI mode See also section 3 3 optional Isi Zapper remote control 15 1 Switching the unit on off ISI mode gt When the receiver is on standby you can switch it on by pressing the On Standby button on the remote control on the receiver gt When operating normally you can switch the unit into On Standby mode by pressing the On Standby button 15 2 Program selection ISI mode 15 2 1 Using the channel up down buttons gt To select a channel use the up down arrow buttons on the receiver or the Channel on the remote control to scroll up or down the channel settings 15 2 2 Using the numeric pad keys gt Use the numeric keypad to enter the number of the desired channel For example 49 1 for channel slot 1 1 then 4 for channel slot 14 2 then 3 then 4 for channel slot 234 1 then 5 then 6 then 7 for channel slot 1567 When entering channel numbers with multiple digits you have approx three seconds after pressing a key to complete the entry If you wish to enter a number consisting of only one two or three digits you can speed up the
3. gt Press this key again to return to normal operation 3 The sound will continue to be reproduced normally during freeze frame 7 9 Teletext Your receiver can display teletext information on channels that broadcast teletext data This is displayed by the symbol in the Info box gt Switch Teletext on by pressing the Teletext button 7 10 HbbTV The symbol in the Infobox indicates that the programme provider is offering an HbbTV application gt Switch to a channel that is broadcasting HbbTV data 40 After a few seconds the box appears at the lower right of the screen indicating the availability of HbbTV content gt Launch the HbbTV application by pressing the red function key 4 Depending on the speed of the Internet connection there may be slow response times or short interruptions 7 11 Subtitles When switching on a transmission which is broadcast with sub titles the subtitles symbol El appears in the Info box gt Using the Option selection feature allows you to select subtitles you wish to dis play under the Subtitles item U The unit can display both video text subtitles and DVB subtitles The display for the two subtitle types may be different W Please note that subtitles can only be displayed if the programme provider also actu ally broadcasts the corresponding data If the programme provider only sends subtitle recognition but no data subtitles cannot be displayed U If you would lik
4. Caution If you have a problem with this device please call our Technical Hotline in the first instance If you need to send the device to us for any reason please use the following address only TechniSat Teledigital GmbH Service Center Nordstrasse 4a 39418 Stassfurt 58 59 60 TechniSat Warranty How to get your three year warranty Step by step 1 Register your products within four weeks of purchase either by sending in your completed registration card see reverse or online at Once the fault has been repaired the www technisat com Service Report will be returned to you along with the repaired device with an appropriate 2 If contrary to expectations your equipment should comment from our service workshop develop a problem in the first instance please contact your dealer or our technical hotline on 49 0 3925 9220 1800 normal charges will apply for overseas Calls 3 If the problem cannot be resolved by calling our hotline please complete the Service Report in full see reverse and briefly describe the fault with Special note for TV customers your device 5 year warranty after product registration of TechniSat digital D televisions 3 year warranty 2 year 4 Send the faulty equipment to your dealer in the inal k si ith fof h Warrant warranty on parts except for the screen ongina pac aging a one Wi a PLOOronpure ase x remote control and housing parts
5. such as cables plugs etc are used during installation Invalidation of the warranty claim All warranty claims are invalidated if the equipment interior is accessed by anyone other than TechniSat or if the equipment is modified e g by hardware or software modifications Service under warranty shall also not apply in the event of damage caused by incorrect installation or improper use or in the event that manufacturer s numbers have been changed or rendered illegible or mechanical damage has been caused by accident or impact The guarantee does not cover compensation or expenses specifically not loss of data e g channel lists that have been set up or recordings on hard disks What to do in the event of damage If you encounter a problem with your TechniSat equipment despite the ultra modern manufacturing and constant quality checking we would ask you to first contact your dealer or our technical hotline on 49 0 3925 9220 1800 normal charges will apply for overseas calls If we cannot solve the problem in this manner we would ask you to contact your dealer or supplier Please make sure you complete and send off the registration card Or you can conveniently register online at www technisat com 62 Note on Making a claim under warranty The warranty can only be invoked if 1 the fully completed registration card has been received by us no later than 4 weeks after purchase or you have registered the product o
6. Arrow selection method section 5 4 1 Arrows are shown on the left or right edge of the highlight Selection list section 5 4 2 The symbol is shown on the right edge of the highlight Entering numbers section 5 4 3 amp Virtual keyboard section 5 4 4 The symbol is shown on the right edge of the highlight 20 5 4 1 Arrow selection method gt If is shown on the left and on the right next to the set value you can alter this using the left right arrow keys 5 4 2 Selection list If H is shown on the right next to the set value the value can be changed using the selection list gt Press the OK button to open the selection list norma gt Highlight the setting you want using the up down arrow keys g By pressing the up down arrow keys it is possible to move the highlight from line to line and to move upwards and downwards page by page using the page up down buttons gt Confirm by pressing the OK button The selection list closes again and the selected setting is shown in the menu 21 5 4 3 Entering numbers gt Use the numeric key pad to enter the new setting which you require if a question mark or a numeric value Lim is displayed 5 4 4 Virtual keyboard If amp is displayed on the right next to the set value the value is altered using the virtual key board You have three different keyboard options when using this data entry method You can switch the keyboard
7. playback WWW Page down Info OK Volume Function selection Zoom Format Audio channel PiP PaP HDMI Front of unit Arrow On Stand by keys Display USB port socket Cl modules OK Smartcard SD MMC card reader card reader Einlegen der CONAX Smartcard gt Push the CONAX Smartcard gold chip face down and aligned in the direc tion of insertion into the Smartcard reader as far as the stop Inserting the Cl Cl modules gt Please refer to the Cl Cl module and card manufacturer s instructions gt Insert the Smartcard you want into the relevant Cl module gt Now carefully insert the Cl module into the slot Rear of unit HDMI Network Audio outputs Tuner slot output port analogue digital Loop LNB2 LNB1 S PDIF USB SCART Mains power Hard drive out input input out ports socket connection drawer RF in 2 Please read this first Before connecting and using the device first check that everything has been supplied and familiarise yourself with the safety instructions The delivery includes 1 digital receiver 1 Quick Start Manual 1 CD ROM 1 remote control 1 mains cable batteries 2 x 1 5V microcells 2 1 Safety advice For your own protection you should read the safety precautions carefully before using your new receiver The manufacturer accepts no liability for damage caused by inappropriate handling o
8. 1 5 g When you switch on the digital receiver sound will be reproduced at the volume level last set During operation of a Bluetooth audio device please also pay attention to section 8 4 7 headphone settings in your operator manual o Volume control and the mute button also control the digital audio outputs not for the bit stream setting and switch switch these to mute 15 4 1 Using mute gt To switch the sound off mute press the Sound on off button press the key again to switch the sound back on uJ Throughout the time that the volume is switched to mute the Ef symbol appears at the upper right of the screen L During operation of a Bluetooth audio device e g headphones the volume of the headphones can be adjusted while switching to mute without deactivating the mute setting 15 5 Video text ISI mode Your receiver can display teletext information on channels that broadcast teletext data 15 5 1 Switching on Teletext gt Switch Teletext on by pressing the Teletext button 15 5 2 Page selection gt Use the numeric keypad keys 0 to 9 to enter the three digit page number of the desired video text page Your entry will be displayed in the upper left hand corner of the screen 51 4 As the Teletext pages cannot all be transferred by the broadcaster at the same time it may take a few seconds before the page is displayed This is the case when the requested page e g using the video text search canno
9. After successfully installing the tuner module continue with section 4 Connecting the DVB receiver 10 3 3 Optional IsiZapper remote control IsiZapper item no 0000 3773 is an optional remote control device which is specially designed for operation of Isi mode see section 15 On Stand by EIN AUS Numeric keypad keys Sound on off O Teletext Function selection Arrow keys M lt Channel Volume TechniSat 11 4 Connecting the DVB receiver a ar o aoa Network connection LNB 1 connection to LNB Input 1 on the DVB receiver Please note the LNB must be connected with to LNB Input 1 when operating using an antenna signal LNB 2 connection to the LNB Input 2 on the DVB receiver HDMI connection from the DVB receiver to the TV Audio output connection to a hi fi surround sound system DVB receiver connection to the network internet Cable connection digital and or the DVB T antenna connection with the RF IN antenna input on the DVB receiver 12 When using an optional DVB S tuner module for operation with four antenna signals h Additional connection for LNB 3 to the LNB Input 3 on the DVB receiver i Additional connection for LNB 4 to the LNB Input 4 on the DVB receiver When using an optional DVB S tuner module for operation with one antenna signal h Connection for LNB 1 to the LNB Input 3 on
10. If this does not happen the function or the values that existed before the change was made will be reset automatically on exiting the menu Ifan Accept field or the green function key with Accept is displayed in the bottom line of the screen you can see that the changes made must be saved manually to be accepted gt By highlighting Accept using the right left arrow keys and confirming with the OK button or by pressing the green function key Accept the changes are saved and you move back up to the next menu above Alternatively gt Press the Return button A request appears asking whether the changes you made should be applied gt Use the right left arrow keys Yes or No and confirm your selection by pressing the OK button Changes will now be saved or discarded according to your selection and you move back up to the next menu level above Alternatively gt Press the Menu button to leave the menu directly Settings that need to be saved manually will be reset in this case 4 Ifthe green function key is not displayed on the bottom line of the screen with Accept the changes are saved automatically on exiting the menu 5 4 Changing a setting You can create settings using the arrow selection method the selection list by entering numbers and by using the virtual keyboard The unit specifies the method that can be used to change a highlighted setting You can see this from the following dis played symbols gt
11. and constant quality checking we would ask you to first contact our technical hotline on 49 0 3925 9220 1800 normal charges will apply for overseas calls If we cannot solve the problem in this manner we would ask you to contact your dealer or supplier If you do so please complete the following Service Report beforehand Service Report Serial No Jf l Item number L Description of fault Please briefly explain the problem wit h your equipment Note The serial and item numbers are located on the back of the box or directly on the equipment Surname First name Street Post City code town Telephone optional Please note that a repair under warranty can on ly be carried out quickly and smoothly if this Service Report is completed in full and submitted with a proof of purchase delivery note invoice till receipt etc the defective equipment in the original packaging including all accessories e g network cable remote control and a precise description of the problem The Service Report will be returned to you along with the repaired device with an appropriate comment from our service workshop 2233637000300 wre nn ee nee nn ee nn ee en ne een C pleasecuthere 64
12. key pad the first letter of the corresponding row is highlighted gt The highlight then moves one field to the right with every additional press of the same numeric key Press as often as necessary to reach the desired character This will be added to the entered term after a short delay The various numeric pad keys are assigned the following displayed letters numbers characters and symbols 0 1 2 Mbc aatseice 3 Ey 4 inn 5 iim 6 7 8 9 fo L Once you have reached the field you want with the highlight you can then begin selecting the next character immediately since in this case the character is directly added to the term If you wish to continue directly selecting a character from the same numeric pad you can add the previously highlighted character to the term by press ing the right arrow key 5 5 Options selection In some menus and operating modes e g TV mode music images playback etc you have the option of calling up additional functions and options via the options selection function gt Press the Options button in the lower right hand corner of the screen In this example we can see the option selection for the channel list 23 Every additional press of the Options button moves the highlight down one line each time Some options are selected directly in this window Other options for a number of sub ordinate selection options are located in the option groups Highl
13. the DVB receiver j Connection for the loop out to the LNB Input 1 b on the DVB receiver When using an optional DVB C T tuner module g Cable connection digital and or the DVB T antenna connection with the RF IN antenna input on the DVB receiver k Connection for the loop out with the loop IN I of the DVB C T tuner module The following references a b c etc refer to the illustrations commencing on the previous page onwards 13 4 1 Mains power connection The digital receiver should only be connected to the mains power supply once you have fin ished making all the connections to the various other components This will prevent damage to the digital receiver or other components a Once you have made all the other connections in accordance with the following sec tions use the power cable supplied to connect the receiver to 230 V 50 60 Hz mains power outlet 4 2 External unit 4 2 1 Operating the receiver with 2 4 DVB S antenna signals To be able to use the full scope of DVB S functions on the digital receiver you should oper ate the receiver on up to four separate DVB S antenna signals antenna cables that which are set up identically If you have not installed an additional DVB S tuner module b c Connect LNB inputs 1 and 2 on the digital receiver to your external unit using a suitable coaxial cable or if you have installed an additional DVB S tuner module b c i h Connect LNB inputs 1 a
14. the OK button i The display is dependent on your tuner configuration Also see section 3 2 Using an optional tuner module Network configuration In this step the TV automatically checks the network configuration gt If you do not want to run the network configuration check press the Info button gt If you wish to check or change the network settings press the Options key 29 Use the up down arrows to select whether you want to configure a LAN or WLAN network and press the OK button Now perform the network settings as described in section 8 5 of your operating man ual Then press the Info button to accept the settings The network configuration check will now start again Channel search ISIPRO You have various options for searching for new channels or updating the channel list You can use the ISIPRO channel list function to download a new channel list for your receiv er from the satellite or run a channel search gt To download an up to date channel list use the up down arrow keys to high light the ISIPRO channel list update line MPRO seraa bit spadar To download an available current channel list use the up down arrow keys to highlight the ISIPRO channel list update line and start the process by pressing the OK button The current channel list will now be downloaded via satellite If instead of updating the channel list you wish to perform a channel search via sat ellite or i
15. to be recorded in the background 12 2 Timeshift function The Timeshift function allows you to record and play back at the same time This enables time shifted viewing Hence you can start watching the beginning of a recording and skip through any sections already recorded e g advertising slots The live broadcast of the programme continues to be recorded at the same time see section 10 1 3 in your operating manual 12 3 Ending manual recording gt First select the recording to be ended by selecting the channel on which the record ing is running as described under section 7 4 gt Pressing the Stop button generates a query as to whether the recording should be saved or discarded gt Select Save to save the recording or Discard not to save the recording or Back to continue with the recording 12 4 Ending recording automatically gt After pressing the On Standby button a request is displayed asking what should happen to the recording in progress gt Select the line with the desired action E If you have selected Cancel recording the prompt will now appear as described in section 10 1 1 2 of your operating manual asking you what should be done with the recording E If you selected the programme title or one of the specified times the receiver will now record the current programme in full or until the selected time and then switch to standby The screen will switch off immediately according to the selecti
16. to switch the receiver off again gt The receiver is now in ready mode stand by and if enabled in section 8 2 4 of your operating manual on doing so the time is displayed in the receiver display If the time is not displayed it still needs to be acquired by the receiver To do this switch the receiver on and set it to receive e g ZDF for approx 30 seconds to auto matically acquire the time 7 4 Selecting a channel 7 4 1 Using the channel up down buttons gt To select a channel use the up down arrow buttons on the receiver or the Channel on the remote control to scroll up or down the channel settings 7 4 2 Using the numeric keypad gt Use the numeric keypad to enter the number of the desired channel For example 1 for channel slot 1 1 then 4 for channel slot 14 2 then 3 then 4 for channel slot 234 1 then 5 then 6 then 7 for channel slot 1567 When entering channel numbers with multiple digits you have approx three seconds after pressing a key to complete the entry If you wish to enter a number consisting of only one two or three digits you can speed up the entry procedure by keeping the key depressed a little longer on the last digit 7 4 3 Using the Navigator channel list gt Press the OK button The channel list navigator is now displayed In TV mode only TV channels are shown and in radio mode only radio channels are shown The channel currently selected is highlighted 37 g
17. TechniSat Quick Start Manual TechniCorder ISIO STC Digital Multituner HD Receiver with Internet Access With CONAX cardreader and an interface for recording from two CI CI modules and a DVR recording function via the optional internal hard drive the USB interface or the home network For reception of free to air and encrypted e g VIACCESS CONAX IRDETO etc HD satellite channels Dear Customer Congratulations on your decision to purchase the TechniCorder ISIO STC The operating manual supplied is intended to help you to utilise the comprehensive functions of your new digital receiver to the fullest extent We have kept the operating instructions as brief as possible and have used terminology that everybody can understand The range of functions of your receiver is constantly being expanded by means of software updates This means that additional steps in the operation may be added that are not yet described in this operating manual or the operation of existing functions may be changed For this reason you should occasionally visit the TechniSat homepage to download the lat est version of the operating manual We wish you many years of viewing pleasure with your TechniCorder ISIO STC Your TechniSat Team TechniSat hereby declares that the TechniCorder ISIO STC device complies with the funda mental requirements and any other relevant stipulations of Directive 1999 5 EC The decla ration of conformity can b
18. a hi fi surround sound amplifier 4 4 1 Digital e If your amplifier is equipped with a suitable electrical or optical input you should con nect the AUDIO OUT DIGITAL socket electrically or optically with the elec trical or optical input on your amplifier p Depending on the signal provided by each broadcaster sampling rates of 32 44 1 and 48 kHz are available In addition where broadcast the Dolby Digital signal is also available on this output 4 4 2 Analogue e To do this use a suitable cable to connect the cinch sockets Audio R and Audio L on the digital receivers to an input on your hi fi amplifier e g CD or AUX please note that the phono input is not suitable 15 4 5 USB port The USB port is used for updating the operating software and to transfer data You can also use the film music and image playback functions sections 9 18 9 19 and 9 20 of your operating manual to access MPEG MP3 and JPG files on the USB storage medium Your unit is equipped with an internal WLAN which enables wireless integration within your existing WLAN network However if you wish you can also use an external WLAN don gle for this purpose e g the TechniSat USB WLAN adapter item no 0000 3633 or the Technisat ISIO USB WLAN adapter item no 0002 3633 into the USB port When doing so please also note section 8 5 2 WLAN settings in the instruction manual It is also possible to use a Bluetooth dongle for example to conne
19. copy of invoice or till receipt and all accessories TechniSat Permanent added value and breathtaking technology www technisat com 2239280000220 61 TechniSat Guarantee certificate Warranty Dear Customer You have purchased a high quality TechniSat product that has been put through multiple quality tests and a stringent goods outwards check at every stage Should you still encounter a problem with your equipment contrary to expectations you can always take advantage of a two year legal warranty claim This warranty claim can of course be exercised at any time without having registered the product However from the seventh month after the date of purchase under legal provision the obligation is on you to prove that the problem with the equipment already existed at the time of purchase But TechniSat is offering you another solution By submitting a fully completed and signed TechniSat registration card your two year legal warranty claim is converted into a three year warranty This releases you from your legal obligation to prove that the item was faulty for a period of three years from the purchase of your equipment based on the billing date In the event of a claim under warranty you will receive at TechniSat s discretion a free repair of your equipment or an as new equivalent replacement device To be sure of enjoying your warranty in full make absolutely sure that only original TechniSat accessories
20. ct a Bluetooth audio receiver with the receiver 4 6 SD MMC card reader The SD card reader is used for updating the operating software and transferring data DVR recordings or image music and video files to or from the hard disk You can also use the image music and film playback functions sections 9 18 9 19 and 9 20 of your operating manual to access the corresponding files on the SD MMC card 4 7 Network port RJ45 f You can use the network port to connect the receiver to your existing network This allows you to use the watchmi and internet functions the UPnP functions to access network drives and to use the channel provider s HbbTV applications You can also record onto and playback from network drives 4 When doing so please also note section 8 5 in your operating manual Network Settings 16 5 Basic operation Dear Customer The following section starts by covering basic operation as well as recurrent operating steps for the TV This should make it easier to read the instruction manual since it avoids repeat ed description of identical steps at each individual stage If a function or setting for the device has to be different from the basic operation the differ ence in operation is described in detail at the relevant point in the instruction manual The so called On Screen Display is used on your TV This simplifies operation of the tele vision since the buttons on the remote control can take on dif
21. dard antenna setting press the OK button If the configuration of your reception equipment does not conform to the default set ting press the Options button Now perform the antenna settings as described in section 8 6 of your operating man ual in more detail according to your receiver system then press the Back button to return to the antenna configuration overview Then press the OK button to accept the selections Antenna configuration DVB T If you use an active DVB T antenna that does not have a separate power supply or you do not wish to use this the amplifier for the active antenna can be supplied from your receiver via the coaxial cable To do this set the antenna feed to On 28 During this step a channel spectrum is displayed with the channel signal levels Using this spectrum you can align your DVB T antenna to achieve optimum reception L If the DVB T source has been disabled as described in the step Selecting recep tion signals the next available page of the installation wizard will appear instead of this page gt Use the up down arrow keys to highlight the Antenna supply field and open the selection window by pressing the OK button gt Switch the antenna feed on or off by using the up down arrow keys to highlight the relevant input and confirm with the OK button gt To move onto the next step of the installation use the arrow keys to highlight the Accept field and confirm by pressing
22. e electronic programme guide data to be displayed For this reason the receiver will automatically start downloading the EPG data after the channel list update or channel search is completed This process can take up to 30 minutes gt If you do not wish to wait for the EPG data you can skip the process by pressing the Info button The EPG data will then be updated automatically or you can update it at any time manually 35 o If the EPG update has been skipped your unit will download the EPG data automati cally at the time set as per section 15 2 in your operating manual as long as the automatic EPG update function section 15 1 in your operating manual remains acti vated and the unit is also in standby mode at this point You can also start the update manually at any time section 15 6 in your operating manual Product registration By registering your product you will receive further benefits as well as help us to better design our products and services to your needs You will need an internet connection to view the tutorial Exiting the installation wizard Confirm the final message from the installation wizard by pressing the OK button 36 7 Operating the unit 7 1 Switching on gt Switch the digital receiver on by pressing the On Standby button on the receiver or on the remote control 7 3 Switching off gt Press the On Standby button either on the receiver panel or on the remote control
23. e the receiver to playback programmes automatically with subtitles configure your unit as described in section 8 4 2 of your operating manual to auto matic subtitle playback W Please note that DVB subtitles are only available during playback of a DVR recording if they were either manually or automatically selected at the time of the recording 8 EPG Overview 1 Viewing time gt indicates when programmes are to be shown Timeline gt a graphical display of the viewing time in the form of progress bars 2 Programme name with the respective programme setting within the active pro gramme list 3 Progress bars or the start stop time of the programme being shown 41 4 The current date and the current time 5 Broadcasts of the displayed programme gt Use the right left arrow keys to adjust the display time either backwards or for wards 2 The progress bar will also be moved backwards or forwards along the time bar according to the display time gt Use the yellow function key to switch directly to the display of the current or follow ing programmes gt By pressing the up down arrow keys it is possible to move the highlight from line to line and to move upwards and downwards page by page by using the page up down keys gt If further information is available on the highlighted programme you can call this up exit it by pressing the Info button gt Press the OK button to switch directly to the highlight
24. e viewed online at http Awww technisat de konformitaet technicorderisiostc pdf The unit also bears the CE mark ce This unit is designed for use in all countries of the European Union and in Switzerland Norway Liechtenstein and Iceland Operation in the 5150 MHz 5350 MHz frequency range is only permissible in closed rooms Homi HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC This product contains technologies which are protected by copyright by US patents and by other rights for the protection of the intellectual property of the Rovi Corporation Reverse engineering and disassembly are prohibited This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 1 Illustrations Sleep Timer Sound on off Numeric keypad keys Recording Stop DVR Rewind Arrow keys EPG Page up Back Options selection Channel Menu Freeze frame Jogshuttle TechniSat On Stand by Remote control code TV Radio mode Fast forward Pause
25. ed channel 9 Timer recordings Your device has the following timer functions 1 DVR timer Use this function to switch your digital receiver on and off to record the selected programme onto the selected recording medium while you are out as per section 11 4 1 in your operat ing manual If the receiver is switched on by the DVR timer this will be indicated by DVR Timer in the display 2 Video recorder timer If the video recorder timer is selected your digital receiver will be switched on and off for the selected programme allowing you to record programmes to an external recording unit e g a video cassette or DVD recorder while you are out If the unit is switched on by the video recorder timer this will be indicated by VCR Timer in the display 3 Channel switching timer If your receiver is in normal operating mode it will switch to the programmed channel slot at the set time 4 Alarm If your receiver is in standby mode it is switched on when the programmed channel slot is reached at the set time 5 Series timer To make it easier to find programmes you can search for programme data highlighted in the EPG using any terms The series timer function is used to automatically generate ongoing DVR timer settings for the programmes you find Timer setting also continues after the EPG data has been updated This removes the need for repeated manual programming of timers e g to record episodes in a TV series 42
26. ei Incorrect network settings Check network settings see ver section 8 5 Receiver cannot connect to network Incorrect network cable Check network connection connected No longer possible torecord Selected storage medium Delete existing DVR is full recording s Attach and configure other storage medium See section 11 4 1 It is not possible to delete File system on storagemedi Check storagemedium DVR recordings um is corrupt section 11 4 2 DVR recordings not displayed Selected storage medium is Connect select storageme not connected dium See section 11 4 1 Correct storagemedium setting See section 11 4 1 A second encrypted The two selected Channels Select two channels that are Channel cannot be played arelocated on the same located on the Locate trans transponder ponder See sections 9 4 and 9 4 10 Cldual encryption is not Activate CI dual encryption activated see section 20 1 The Cl Cl in use is not Use a Dual Decrypt com Dual Decrypt compatible patible module 57 Your TV bears the CE symbol and complies with all requisite EU standards Subject to change for amendments and printing errors Version 10 14 Duplication and reproduction only with the publisher s approval TechniSat and TechniCorder ISIO STC are registered trademarks of TechniSat Digital GmbH PO Box 560 54541 Daun www technisat de Technical Hotline Mon Fri 8 am 8 pm 49 0 3925 9220 1800
27. entry procedure by keeping the key depressed a little longer on the last digit 15 2 3 Using the Navigator channel list gt Press the OK button The channel list navigator is now displayed In TV mode only TV channels are shown and in radio mode only radio channels are shown The channel currently selected is highlighted gt You can now highlight the channel you want using the up down arrow keys the page up down keys and the numeric keypad gt Press the OK button to select the highlighted channel 15 3 Switching between TV radio gt Use the O button to call up the NAV menu Radio Internet Movies DVR Music Pictures Back gt Now you can use the up down arrow keys to highlight the desired operating mode TV or Radio or Back to exit the menu again 50 gt Press the OK button to confirm the selection and switch to selected operating mode o The unit switches to the last radio channel set 15 4 Volume control ISI mode You have the option of adjusting the volume on your digital receiver This facilitates opera tion of the receiver as it means you can access all the major functions on a single remote control and will only rarely have to resort to using the remote control for the TV gt To adjust the volume of your TV press Volume to increase the volume and Volume to decrease it uJ During volume adjustment the currently set volume is displayed at the upper edge of the screen vol A
28. er this item using the arrow keys gt Press the OK button to open the Settingsmenu Parental control 18 gt gt Use the up down arrow keys to highlight the Picture settingsitem Pacture seit Then press the OK button to open the Picture settings menu You can also highlight the individual menu items in the same way as you highlight an item on a submenu to open it and alter the respective settings The menu items in some menus have to be highlighted by moving sideways This is done by pressing the right left arrow keys By pressing the up down arrow keys it is possible to move the highlight from line to line and to move upwards and downwards page by page using the page up down buttons You will see the so called menu path in the uppermost line of the menu This shows you the menu you are currently in and the path you took to reach this menu In the example shown this is Main menu gt Setting gt Picture Settings The menu path is also shown throughout the instruction manual and shows you how you can reach the respective menu with the settings described If the blue function key with Help is displayed on the bottom line on the screen a Help page can be displayed by pressing this button and hidden again by pressing it again 19 5 3 Accepting settings Exiting menus and functions In some menus and functions the changes made must be accepted manually in order to save them permanently
29. erating manual Help Where available press the blue function key in the menus to display help text and press again to close the help window 2 4 Important information on data security Before handing your receiver over to your supplier for maintenance purposes we recom mend that you remove all storage media or data carriers Restoring data is not part of maintenance or repair work TechniSat accepts no responsibility for the loss of or damage to data during repair work 2 5 Remote control Changing the battery gt Open the cover on the battery compartment at the rear of the remote control by press ing gently on the point indicated and pushing in the direction of the arrow gt Insert the supplied batteries ensuring that the poles are the right way around indica tor visible in battery compartment gt Close the battery compartment again 2 6 Disposal advice The packaging material used for your receiver consists entirely of recyclable materials Please sort the components appropriately and dispose of them in line with your local waste disposal regulations At the end of its useful life span this receiver may not be disposed of with your regular household waste It must be taken to a recycling collection point for electrical and electronic equipment This is indicated by the symbol on the product the operating manual or the packaging The materials used can be re used in accordance with their labelling B
30. f the DVB S reception signal has not been configured use the up down 30 arrow keys to highlight the All channels or All unencrypted channels and then start the channel search process by pressing the OK button In this search all selected satellites in the antenna configuration are automatically scanned for channels This procedure may take several minutes Please note all messages displayed on screen After a channel list update or a satellite search is performed a search is performed for all other activated reception types This procedure may also take several minutes Please note all messages displayed on screen If you skip the channel search channel list update the default channel list will be loaded Regional programmes Some broadcasters transmit channels with varying regional content On this page you can define your preferences for these regional programmes The selected regional programme is automatically set by switching to the relevant programme provider Use the arrow keys to highlight the programme provider you would like to specify for your preferred regional channel Press the OK button to open a window with the regional programming available for this programme provider Use the up down arrow buttons to select your preferred regional programming Press the OK button to close the window again To accept the selected regional programming use the arrow keys to highlight the Accept field Confirming
31. ferent functions This makes it possible to reduce the number of buttons In this On Screen Display in short OSD the selected functions are highlighted Furthermore you will see a line at the bottom edge of the screen in which the various but tons on the remote control are shown with their current functions In this instruction manual the terms shown in the OSD and the buttons to be pressed are highlighted from other text by the print format shown A Warning indicates an important note which you absolutely should observe in order to avoid problems with the unit or unwanted operation E Tip indicates a note about the function described as well as other functions associat ed with it and any others to be observed with reference to the respective place in the instruction manual 5 1 Switching the unit on off gt When the receiver is on standby you can switch it on by pressing the On Standby button on the remote control on the receiver gt When operating normally you can switch the unit into On Standby mode by pressing the On Standby button 17 5 2 Calling up the main menu and navigating through the menus functions The following example will illustrate how you reach the main menu and call up a submenu The objective of the example is to call up the Picture settings menu gt Press the Menu button The main menu appears on the screen Chanel search gt Select the Settings menu item by moving the highlight ov
32. ighting one of these option groups automatically opens a further window on the left ee aay You can use the up down arrow keys within the options group to highlight one of the options listed there By pressing the up down arrow keys it is possible to move the highlight from line to line and to move upwards and downwards page by page using the page up down buttons The highlighted option is selected by pressing the OK button You then exit the option selection area If you do not want to select an option or wish to leave the option selection area without making any changes simply press the Option button until it is hidden 24 6 Initial installation After you have read the safety instructions and connected the receiver as described in sec tion 4 you can then switch it on as described in section 5 On initial installation of the receiver the AutoInstall installation wizard is launched auto matically The installation wizard allows you to make the most important settings for your digital receiver in the simplest way possible Each step of the installation explains which settings can be made gt In the installation wizard start window you can cancel the initial installation by pressing red function button The receiver then begins to run default pre programming Inthe subsequent installation steps you can use the OK button to accept the setting which you have selected and move on to the next installation step
33. ile with the file extension cpad onto the stick or the SD MMC card If you only want to run a single update copy the singleupdate file or for several updates copy the autoupdate file onto the USB stick or the SD MMC card Please note that the singleupdate and autoupdate files must not have a file extension Please also note here that to do so your folder settings on your PC must be set to hide file extensions The USB stick or SD MMC card should not contain multiple cpad software files Furthermore the autoupdate and singleupdate files must not be present at the same time Now switch the receiver to stand by and insert the USB flash stick into the receiver s USB port or insert the SD MMC card into the SD MMC card reader on the receiver Now switch on the receiver The update process is now displayed in the following steps The message Loading software from data medium will now appear Then a progress bar appears showing the progress of the software loading operation Once the software has downloaded to 100 another progress bar appears one showing the progress of the individual update steps and the other showing the overall progress of the update The display shows the progress of the software download and the individual update steps Once the update is complete the TV image appears again You can now switch the receiver to standby and remove the USB stick or SD MMC card The update should not be interru
34. ion is inserted or switch the function off E Please also note that to do this both channels to be unencrypted must be located on the same transponder See also section 9 5 1 in your operating manual MHEG autostart If an MHEG application is available for a transmitter it can be started automatically gt To do this activate the MHEG Autostart item to on PIN entry Here you can save a PIN for the respective CI slot This PIN is required to support DVR recordings with parental control restrictions Manually initialising the Cl Cl modules gt Press the green CI Reset function key to initialise the Cl Cl module manually 48 15 ISI mode A wide range of functions and added value options make television with TechniSat an amazing and complex experience with unlimited possibilities ISI mode reduces this diver sity of available options and is therefore ideal for children or older people who feel unsure about using the many different possible settings when operating the unit If this mode is activated it will not be possible to accidentally change any settings using the remote control ISI mode also provides simplified channel information in extra large text size on the screen for persons with poor or impaired vision and integrates a highly legible digital time display on request gt Activate ISI mode as described in section 8 8 1 6 in your operating manual o When ISI mode is active the following functions are deactivated
35. it instal Correct the settings led at receiver see section 8 6 Antenna incorrectly adjusted Adjust antenna Antenna cannot be rotated Motor not compatible with Use a suitable motor DiSEqC 1 2 Time not acquired approx 30 seconds Run ZDF Standby clock switched off Switch stand by clock on see section 8 2 4 Character size set to small Correct the character size see section 8 8 1 1 55 Possible cause Receiver cannot be operated switched on or off Defective data stream gt receiver blocked Hold down the On Stand by button on the receiver or the remote control for approx 5 seconds Pull the mains plug out of the power supply for approx 5 seconds and then switch the deviceback on Perform a Flash reset Warning All personal settings will be lost gt Remove the mains adap ter from the device gt Press and hold Standby and the up arrow key at the same time With Standby and the up arrow key depressed reconnect the plug Keep the buttons pressed for around 5 seconds and then release both buttons The text Factory set tings appears in the display USB device not recognised USB device formatted for Format USB device for wrong file system FAT32 file format Device automatically switches off after a certain time Auto Standby function is activated Auto Standby setting check and deactivateif necessary section 8 2 7 56 PC cannot connect to rec
36. layout between the so called QWERTY keyboard and the alphabetic keyboard an SMS keyboard can also be used at any time The functionality of the QWERTY keyboard is identical to that of the alphabetic keyboard They only differ in the arrangement of the various letters numbers characters and symbols gt Press the OK button to open the virtual keyboard The keyboard now appears in the alphabetical form gt Press the Option button to toggle between the QWERTY keyboard and the alphabet ic keyboard You can now enter the term you want as follows Arrow keys Move the highlight on the keys of the virtual keyboard OK The highlighted character is added to the end of the term or the highlighted function is executed E 3 Yellow function key The keyboard toggles between upper case lower case E Red function key Pressing holding down deletes the character in front of the blue highlight the whole entry E Green function key The entered term is accepted A Blue function key The keyboard switches to the alternative characters m Moves the blue highlight within the term 22 The SMS keyboard is operated using the numeric keys on both the alphabetical and the QWERTY keyboard and can be used at any time The coloured buttons thus incorporate the functions described above gt Press one of the numeric pad keys 0 9 and select the various letters numbers characters and symbols After first pressing a numeric
37. nd 2 and LNB inputs 3 and 4 with your external unit using a suitable coaxial cable Also see section 8 6 DVB S antenna setting in your operating manual 4 2 2 Operating with 1 DVB S antenna signal In exceptional cases you can also operate the receiver using just one DVB S antenna sig nal However in this event the recording and PIP functions are only available to a limited extent see section 8 6 3 in your operating manual If you have not installed an additional DVB S tuner module b Connect the LNB Input 1 of the digital receiver to your external unit using a suitable coaxial cable or if you have installed an additional DVB S tuner module h j b Connect the LNB Input 3 of the digital receiver to your external unit using a suitable coaxial cable Now also connect the loop out output with the LNB input 1 Also see section 8 6 DVB S antenna setting in your operating manual 4 2 3 Operating with DVB C T antenna signals The digital receiver can receive signals to DVB C or DVB T standard Reception in parallel with DVB S reception is also possible If you have not installed an additional DVB C T tuner module g Connect the RF IN antenna input on the digital receiver to your external unit using a suitable coaxial cable or if you have installed an additional DVB C T tuner module g k Connect the antenna Input RF INon the digital receiver to your external unit using a suitable coaxial cable Now also connect the loop out out
38. necessary No sound via HDMI picture OK Wrong HDMI sound format selected Check HDMI sound format see section 8 4 5 No sound or wrong audio playing Dolby Digital active or wrong audio language selected Check setting in menu see point 8 4 1 and 8 4 3 Check Dolby Digital langu age selection see section 9 7 54 Cannot receive channels that were previously recei ved Intermittent appearance of square blocks in the picture Device switches to freeze frame intermittently no sound Screen sometimes blank with the message no signal No picture no sound display on Time not displayed while in standby mode Text in the Infobox or EPGplus detailed infor mation for example can be hard to read from a distance Possible cause Antenna defective or not Check antenna correctly adjusted Channel transferred to a dif Run a search ferent transponder see section 17 Channel no longer being None broadcast Heavy rain or snow Remove snow from dish antenna Antenna incorrectly adjusted Adjust antenna Dish too small for your loca Use larger antenna tion Obstacle between dish and Mount dish with clear line of sight satellite e g a tree Switch off receiver short circuit switch receiver back Short circuit in LNB feed line on Faulty or missing cable Check all cable connections connection see section 5 Defective LNB Replace LNB Incorrect external un
39. nline during this period 2 you have first attempted to resolve the issue by contacting your dealer or our technical hotline on 49 0 3925 9220 1800 normal charges will apply for overseas calls 3 you have filled out the Service Report in full including a precise description of the problem 4 the defective equipment is returned to the vendor including any accessories e g network cables remote control etc but not smartcards and Cl modules that are not included with delivery in the original packaging along with a proof of purchase copy of invoice or till receipt and the completed Service Report The Service Report will be returned to you along with the repaired device with an appropriate comment from our service workshop How to register your product 1 Registration by post TechniSat Teledigital GmbH cut out the completed TechniSat registration TechniSat Warranty card along the dotted line place in an envelope with the appropriate postage Nordstrasse 4a affixed and send to the following address D 39418 Stassfurt see right Germany 2 Online registration Just complete the guarantee form you will find online at the TechniSat website www technisat com and your product will be registered with TechniSat 63 Service Report Service Report in the event of a claim under warranty If contrary to expectations you encounter a problem with your equipment despite the ultra modern manufacturing
40. ns Now the data is updated and in the next step you are given the opportunity to select the desired channels The up to date data for the watchmi channels is then downloaded watchin Pou warren Channels wil Ge updated pose This process Can tebe up to D mie Aare you Can adhd Ihe channels to your TV fat Selected sareh wili be appended a1 Ue end of your Ty ex Update watrhere chorasi on After the data has been updated you have the option of selecting the channels and adding these to your TV list 34 watchin Pieate select the watcher cfheneets that ihal be shed to your Ty the gt Use the up down arrow keys to move the selection bar over the channels and select the highlighted channels with the OK button The selected channels appear with a check mark next to them gt Highlight a selected channel again and press the OK button to remove this channel A brief description of the highlighted channel appears on the right hand side gt Use the yellow function key to select all channels gt To finally accept your selection press the green function button You can also change these settings later on at any time You will find these options in section 12 of your operating manual Loading EPG data Your digital receiver contains an electronic programme information service ElectronicProgrammeGuide You must first get the receiver to download the EPG data from the satellite to enabl
41. o By pressing the Back button you can go back to the previous installation step This enables you to correct any wrong entries at any time The initial installation shown here simply serves as an example The exact process for the initial installation will depend on the settings you select Therefore please follow all instructions displayed on screen carefully 25 Menu language gt When the installation wizard is launched the selection window for the operating language opens first Use the arrow keys to highlight the desired operating menu language The preferred audio language will be set automatically according to this selection You can change this setting at any time as described in section 7 4 1 of the instruction manual Press the OK button to accept the setting and access the next stage of the installation wizard Country selection Vv Use the arrow key to select the country in which the receiver will be operated Automatic setting of the local time as well as changing to summer winter time will take place based on your selection Channels will also be automatically sorted in the installation wizard according to this setting as well as following a channel search Press the OK button to accept the selection Picture format gt Use the right left arrow keys to set the picture format for the connected TV 26 i The picture format on the TV will be automatically adjusted according
42. ocked channel involves an encrypted broadcaster please also refer to section 9 5 3 in your operating manual 38 7 4 6 Returning to last channel selected gt Press the Back button on the remote control to return to the last channel selected gt Press the button again to return to the channel you were previously watching 7 4 7 Switching between TV radio gt Use the TV Radio button to switch between TV and radio mode L The unit switches to the last radio channel listened to o Alternatively you can also switch between TV and radio operation as described in sections 7 4 and 10 7 4 8 Info box Every time you change channels an info box appears on the screen for a period as defined according to section 8 8 1 3 in your operating manual You can also call up the info box manually by pressing the Info button on the remote con trol This Infobox displays the location and name of the selected channel the title of the current programme and the currently active channel list E The progress bars are coloured yellow according to the amount of transmission time already expired for the current programme If the beginning of the progress bar is coloured red the transmission started too early and if the end of the progress bar is coloured red the current programme has overrun Additional programme properties are also displayed For example for teletext for 16 9 broadcasts for encrypted channels E for Dolby Digital b
43. on 45 13 DVR playback You can access DVR recordings via the DVR Navigator 13 1 Calling up the DVR Navigator Starting DVR playback The DVR Navigator can be called up in the following ways Dependent upon whether you are currently in TV or radio mode a list will appear of the existing TV or radio recordings stored on the internal hard drive a connected USB storage device an inserted SD MMC card or an available network drive BB NAV Movies OVA VAPL2IG FAT cot heck My TY Recordings Die oberen Zehntausend Tue 2000 2011 7 1079 1091 Ons Dote o in dom Apartment lt 1 Otai Options When doing so pay careful attention to the information and settings for global and user dependent parental control in section 16 2 of the instruction manual g The broadcast information can be displayed and hidden by pressing the Info button repeatedly gt You can start to play back a recording by highlighting it and confirming with OK 13 2 When in TV mode gt In TV mode press the Stop DVR button to switch directly to the DVR Navigator or gt Open the programme lists navigator by pressing the OK button and switch to the DVR Navigator by pressing the Stop DVR button or gt In Function selection now select the Films DVR item gt Now call up the My Recordings folder on your attached recording medium sec tion 11 4 1 in your instruction manual 13 4 From playback of a running existing DVR recording g
44. pted at any point by removing the USB stick or the SD MMC card or by switching off the power supply as this can cause the receiver to malfunction 53 17 Troubleshooting guide Remote control does not work Incorrect remote control code has been set Set the correct remote con trol code see section 8 2 5 Batteries are spent Replace the batteries see section 3 5 Various Channels not shown Incorrect channel list Select a different channel list in channel list selected see section 9 4 3 1 There is sometimes inter ference with channels such as DSF and Tele 5 Sound OK no TV picture Picture not fully visible or distorted Interference from cordless DECT telephones Radio mode called up and radio background image is switched off Increase the distance bet ween the base station and the receiver Check the setting see section 8 8 1 and 9 4 7 Scart plug not connected correctly Picture format not set correctly Connect Scart plug correctly Check picture format see section 8 3 1 Incorrect picture display zoom selected Check picture display zoom in menu see section 8 3 2 Check zoom setting see section 9 12 No picture no sound display not on No picture via HDMI No mains voltage Configured HDMI resolution not supported by TV Check mains adapter and plug Adjust HDMI resolution see section 8 3 3 for connect to correct device via Scart cable if
45. put with the LOOP IN antenna input of the tuner module 14 Also see section 8 6 DVB S antenna setting in your operating manual 4 It is not possible to receive analogue TV via the cable or antenna 4 2 3 1 Simultaneous operation with DVB C T antenna signals Use the TechniSat DVB C T switch to receive DVB T signals DVB C and DVB C cable channels simultaneously item no 0000 3263 This switch automatically switches between DVB T reception and reception of DVB C cable channels thus preventing potentially con flicting frequency influences For this purpose connect the switch output as described in section 4 2 3 4 2 4 Operating with a rotating system b For operation with a rotating system connect the DiSEqC motor Level 1 2 to LNB input 1 4 3 Connecting to a TV d Connect the receiver HDMI output and TV HDMI input via an HDMI cable If your TV is equipped appropriately it will automatically switch to the HDMI input when the digital receiver is switched on Alternatively Connect the receiver SCART socket and TV SCART socket using a SCART cable If your TV is equipped appropriately it will automatically switch to the AV and thus to SAT operation when the digital receiver is switched on It may be necessary to adjust the signal type on your TV see section 8 3 6 in your operating manual 4 4 Hi fi surround sound amplifier To achieve the best possible sound quality you can connect your digital receiver to
46. r by non compliance with the safety precautions Function related discharge current may occur with electrical equipment This is acceptable and poses no risk even if it is experienced as a slight tingling To prevent these discharge currents mains operated devices receivers TVs etc must always be installed or connected with the power switched off i e devices must be disconnected from the mains power supply Only operate the receiver in a temperate climate To ensure adequate ventilation place the receiver on a flat horizontal surface and do not place any objects on top of it There are ventilation slots here to allow heat to be dissipated from the interior of the unit Never place any burning objects such as lit candles on top of the unit X Do not expose the receiver to water droplets or water spray and do not place any objects filled with liquid such as vases on top of it If water gets into the unit imme diately disconnect the mains plug and inform the service department P Do not operate any sources of heat near to the unit which may also heat it up Do not obstruct the ventilation slots Never open the receiver housing under any circumstances You risk receiving an electric shock Any necessary repairs to the receiver should only be carried out by qualified service personnel In the following circumstances you should disconnect the device from the mains power and consult an exper
47. rding where you want to add a tag gt Pressing the Record button sets a tag at the selected location 13 8 Skipping to tags During playback you have the option of navigating directly to locations in the recording where you have set tags gt In Options selection use the Tag menu item to select the tag in order to skip to the desired position in the recording 13 9 Ending playback gt Press the Stop button to end playback Playback will end and your receiver will return to normal mode In doing so the receiver notices the place in the recording where playback ended If you start play ing this recording again it will automatically resume at the point where you previously left off 47 14 Encryption system From this menu item you can access the submenus for the connected Smartcards and the Cl Cl modules gt Call up Main Menu gt Encryption System Cl siot 1 empt gt Select one of the inserted Cl Cl modules in order to access its sub menu where you can perform the settings Please note that the submenu now displayed is provided by the module and may therefore differ from module to module 14 1 Encryption system settings CI dual encryption CI dual encryption makes it possible to receive two encrypted channels at the same time using only one Cl module and a valid Smartcard gt Select the Cl slot CI1 CI2 CI1 CI2 or auto for automatic recognition in which the Cl module for dual encrypt
48. roadcasts for subtitles E for HbbTV The current time is shown in the right hand upper corner of the screen 39 7 5 Receiving encrypted channels gt Insert the CONAX Smartcard into the card slot in the integrated card reader gold coloured chip facing down and in the direction of insertion or gt Insert a Cl Cl module into the slot gt Insert the smartcard into the Cl Cl module card slot Ensure that the gold coloured chip on the smartcard is facing upwards in the direction in which the card is inserted 7 6 Volume control You have the option of adjusting the volume on your digital receiver This facilitates opera tion of the receiver as it means you can access all the major functions on a single remote control and will only rarely have to resort to using the remote control for the TV gt To adjust the volume of your TV press Volume to increase the volume and Volume to decrease it 7 6 1 Using mute gt To switch the sound off mute press the Sound on off button press the key again to switch the sound back on 4 Throughout the time that the volume is switched to mute the El symbol appears at the upper right of the screen 7 7 Selecting a different language Sound option gt Using the Options selection feature you can select the language sound option you want via the Sound option 7 8 Freeze frame gt Press the Freeze frame key to display the current TV picture as a still image
49. s resumed ISIO internet list updates The receiver contains a pre programmed ISIO list with web links This can be updated auto matically 32 gt If you do not want to wait for the current ISIO internet list to be downloaded you can skip this process by pressing the Info button watchmi In this step you can activate the watchmi service and select the desired channels to be saved in the TV list and the EPG overview The watchmi service is an online service operated by FUNKE Digital TV Guide GmbH watchin gt Activate the watchmi service using the right left arrow keys to select the on or off option and then press the OK button gt Select Start Tutorial to view a short introduction You will need an internet connection to view the tutorial The general terms and conditions for using the watchmi service will now be displayed 33 gt Use the up down arrow keys to move through the general terms and conditions page by page Use the right left arrow keys to make a selection from the following options Cancel The general terms and conditions are closed and you can now decide whether you wish to activate or deactivate watchmi The pre selection is set to On gt Reject The general terms and conditions are closed and you can now decide whether you wish to activate or deactivate watchmi The pre selection is set to Off gt Accept With this selection you accept the general terms and conditio
50. t gt the power cable or mains plug is damaged gt the unit has been exposed to moisture or liquid has got into it gt there are significant malfunctions gt there is severe external damage 2 2 Periods of non use During a storm or lengthy period of non use e g holiday the receiver should be discon nected from the mains and the antenna cable removed Before you disconnect the receiver from the mains you should first switch it to standby mode and wait until the time appears in the display or the red LED light is displayed 2 3 Important notes on operation Operation of the digital receiver is simplified through the use of so called On Screen Displays OSD This also means that the number of keys on the remote control unit is reduced All functions are displayed on screen and can be controlled by means of a few control but tons Functions that are logically related are combined into a MENU The selected function will be highlighted The red yellow blue and green function keys are indicated by coloured bars at the bottom of the screen In the various menus these coloured bars represent different functions which can be implemented by pressing the appropriately coloured keys multi function keys on the remote control The function keys are only activated when a brief description is displayed in the appropriate field The button identifications and terms that appear in the OSD menu are shown in bold type in this op
51. t Press the OK button to open the DVR Navigator or gt In Function selection now select the Films DVR item gt Now call up the My Recordings folder on your attached recording medium sec tion 11 4 1 in your instruction manual 46 13 5 Pause Freeze frame gt To pause playback of a recording freeze frame press the Pause Play button during playback gt Press the Pause Play button again to resume playback from the same location 13 6 Fast forward Rewind Your DVR has fast forward rewind functions so you can get to a specific place in a recording gt Press the Fast forward or Rewind button during playback The message Fast forward gt gt or Rewind 4 lt appears The recording will now play in the specified direction at 4x speed gt If you press the Fast forward or Rewind button again the speed will increase to 16x The message Fast forward gt gt gt gt or Rewind 444 appears gt If you press the Fast forward or Rewind button again the speed will increase to 64x The message Fast forward gt gt gt gt or Rewind 4444 appears gt Pressing the Fast forward or Fast rewind button again causes you to jump for wards or backwards in 10 minute increments gt When you get to the place you want in the recording you can return to normal play ing mode by pressing the Play Pause button 13 7 Setting tags gt Skip as described above to a location in the reco
52. t You can view additional data about the current programme by pressing the INFO button 7 4 3 1 Selecting the channel gt You can now highlight the channel you want using the up down arrow keys the page up down keys and the numeric keypad gt Press the OK button to select the highlighted channel 7 4 3 2 Selecting a list To make it easier for you to find channels your device provides various channel lists You can select your Favourites lists see section 13 1 of your operating manual and sort or filter the channels according to various criteria gt Press the OK button The active channel list is now displayed gt Now use Options selection to open the desire channel list 7 4 5 Calling up blocked channels If a channel is selected that is blocked by the parental control function the message device PIN will be displayed on the screen CUNE gt Use the numeric keypad to enter the PIN for your device The desired channel will be displayed or gt Change to an unblocked channel as described in section 7 4 4 If global parental control is enabled the device PIN code will be requested again when the blocked channel is switched on To make things easier for you you only need enter the PIN code once during each operating phase d When doing so always pay careful attention to the information and settings for global and user dependent parental control TechniFamily in section 16 2 of the instruction manual d If the bl
53. t be instantly read into the memory immediately after the channel is changed 15 5 3 Teletext subpages If teletext subpages are available for a selected Teletext page an indicator showing that subpages have already been downloaded appears on the left next to the teletext As soon as a new subpage is available this is automatically displayed gt Use the OK button to show a specific subpage The column on the left side of the screen is enabled Subpages that have already been acquired are displayed gt Use the up down arrow keys to select the subpage you want gt Exit the subpage display by pressing OK 15 5 4 Mixed viewing mode gt Press the Teletext key again to enable mixed viewing mode This means that the teletext is superimposed on the TV picture 15 5 5 Exiting Teletext gt Press the Teletext key to return to normal operating mode 52 16 Software updates via USB interface In addition to the automatic software updates via the internet and DVB sources you also have the option of updating the receiver software via the USB interface or via the SD MMC card reader 7 a 1 To be able to run the software update via the USB interface or the SD MMC card reader you first need to download the current software version from the Technisat homepage www technisat de The update can be performed using a standard USB flash stick and an SD MMC card which has been formatted in FAT32 format Now copy the software f
54. t the internet link you want using the up down arrow keys the page up down keys and the numeric keypad gt Pressing the OK button opens the highlighted web link The time it takes for the selected site to be displayed depends on the selected site and the bandwidth of your DSL connection 12 DVR recording The following recording modes are available for DVR recording 1 Instant recording Select this type of recording to immediately record the programme currently being broadcast at the push of a button 2 Timer controlled recording This function is used to switch your digital receiver on and off to record the selected pro gramme onto the recording medium while you are out The timer can be either manually programmed or automatically programmed via the EPG function 3 Timeshift recording Timeshift recording enables time shifted TV viewing You can start to play back a pro gramme while it is still recording timeshifting 12 1 Instant recording gt Switch to the channel on which the programme you want to record is being broad cast gt Press the Record button to record the current programme gt Press the Pause playback button to play back the current programme from a partic ular point 44 gt To continue playing back the programme from this point press the Play Pause but ton again o You are now watching the programme with a time delay to the live broadcast Timeshift while the programme continues
55. to allow it to engage Now slide the drawer into the unit until you feel slight resistance Now carefully push the drawer further in using slight pressure to connect the disk drive with the unit If it is not possible to push in the drawer as far as the stop using slight pressure or until the drawer engages repeat the procedure starting from section b and check that the disk drive is positioned correctly f After successfully installing the tuner module continue with section 3 2 Using an optional tuner module or section 4 Connecting the DVB receiver 3 2 Inserting the optional tuner module Your DVB receiver can also be equipped with an additional tuner module a Disconnect the unit from the mains power supply Please also note section 2 2 peri ods of non use b Press the securing hooks on the protective cover together and remove the cover c Note the printing on the tuner module to ensure that it turns in the correct position and insert the tuner module with the contact strip facing forwards into the slot which is now open d Now slide the tuner module into the unit until you feel slight resistance Now carefully push the tuner module further in using slight pressure to connect the tuner with the unit If it is not possible to push in the tuner module as the stop using slight pressure remove the tuner module and start again from section c e Now screw in the tuner module using the screws provided f
56. to your selec tion gt Press the OK button to accept the selection Selecting reception signals At this point in the installation wizard you can select the number of antenna cables which are connected to the receiver and which reception types you would like to use gt Use the up down arrow keys to select the reception signal available to which you wish to connect or from which you wish to disconnect DVB S for digital satellite channels DVB C for digital cable channels DVB T for digital terrestrial channels gt Press the OK button to open the selection window highlight the setting you want with the up down arrow keys and close the window by pressing the OK button again gt To move onto the next step of the installation use the arrow keys to highlight the Accept field and confirm by pressing the OK button Number of antenna signals DVB S In this section in the installation wizard select how many DVB S antenna cables are con nected to the receiver 27 Use the right left arrow keys to select whether you have connected1 2 3 or 4 DVB S antenna signals Press the OK button to accept the selection The setting options are dependent on your tuner configuration Also see section 3 2 Using an optional tuner module Antenna configuration DVB S In this step of the installation you can adapt your digital receiver set up to the configuration of your antenna DVB S If you wish to accept the stan
57. with the OK button takes you to the next installation step If you subsequently select another regional programme for a programme provider as per section 9 4 4 in your operating manual this will be saved in the same way in future for this programme provider 31 Software updates The digital receiver will now check whether a new version of the software is available for the receiver If a new software version is available you can carry out an automatic software update TechniMatic lt If you do not want to wait for a search for new software or a software download you can skip this step if you wish by pressing the Info button If the search for new software or updates is skipped your device will run another test at a set time as per section 18 5 2 in your operating manual and will load the soft ware automatically as long as the function section 18 5 1 in your operating manual remains activated and the unit is in standby mode at this time If there is no new TV software available you can press the OK button to go to the next step of the installation wizard If on the other hand new TV software is found the automatic software update can be started by pressing the OK button The message Updating software please wait now appears along with a progress bar showing the progress of your download Two additional progress bars then appear showing the progress of the individual updating steps Then AutolInstall i
58. y ensuring that valuable raw materials in old equipment are re used you can make a valu able contribution towards protecting our environment Please contact your local authority for the location of the nearest recycling point Please ensure that dead batteries from the remote control and electronic waste items are not sent to your regular household refuse site but are correctly disposed of either in special bins for problem waste or at collection points at specialist dealers 3 Optional Hardware Your DVB receiver can also be equipped with optional hardware such as various tuner modules and an internal 2 5 hard drive 3 1 Installing the optional internal hard drive Your DVB receiver can also be equipped with an internal 2 5 hard drive or SSD for DVR recording functionality a Disconnect the unit from the mains power supply Please also note section 2 2 peri ods of non use Now press the handle of the hard drive drawer together to release the lock and care fully remove the drawer from the housing Insert your 2 5 hard drive or SSD in the drawer with the contact strip pointing towards the open end of the drawer Now carefully click in the securing hook of the drawer first on one side of the 2 5 disc drive and then on the other If this is not possible with light pressure remove the hard drive from the drawer and reposition it Depending on the disk drive being used the underside may need to face upwards

TechniSat 0000/4730 TV set-top boxe

Contents

Download Pdf Manuals

Related Search

Related Contents