SwissVoice ePure 2
Contents
1. select Clock Alarm using the navigation key and press OK D Select Alarm Tone using the navigation key and press OK e Select the desired alarm melody and press OK The activated alarm is displayed in standby mode by EI The alarm sounds for 30 seconds or can be deactivated immediately by pressing any key If press navigator key the alarm will on again in 10 minutes Set auto clock The alarm sound changed to 30 seconds from 60s If set to ON the date time can be updated by CID if set to OFF it cannot be updated by CID Keypad lock Activate keypad lock H Press approx 3 sec Keys Locked All keys are locked Deactivate keypad lock H Press 1 approx 3 sec Redial The Redial list contains up to 10 entries H Press and select the desired entry using the navigation key D Press the Talk key Edit redial list D Open the Redial list press OK You have the following options Save Number Add number to the phonebook Delete Delete the entry Delete All Delete the entire redial list 10 ePure TAM 2nd generation ePure TAM 2nd generation PBX operation Your telephone is designed for use in the analogue telephone network and can be operated on a PBX that supports DTMF dialling and flash signalling To enter the R e g needed to establish a connection press and hold key 7 You can adjust the flash recall time for R see chapter Advanced settings Paging Locate2. you can listen to the messages being recorded over the handset loudspeaker TAM Language Select the default outgoing message language Memory full The recording capacity of your answer machine is 30 minutes including outgoing messages If the memory is full Memory full appears on the handset display No more messages can be recorded The answer machine switches to Answer only mode automatically You must delete old messages Remote access You can remote access your answer machine from any external telephone with DTMF or multifrequency dialling function Dial your number press and enter your PIN code 0000 on delivery The remote access PIN code is identical with the PIN code of your telephone Activating deactivating remote access To be able to remote access your answer machine you must first activate the function H Press select Answ Machine Answ Setting Remote Acc and press OK e Select Activate or Deactivate and press OK ePure TAM 2nd generation 21 ePure TAM 2nd generation Remote operation from an external telephone You can remote access your answer machine from any telephone with DTMF or multifrequency dialling function H Dial your number D Press when you hear your outgoing message The outgoing message is interrupted D Enter your PIN code 0000 on delivery If the PIN is correct you will hear a confirmation tone D You can now perform a number of functions by entering the relevant
3. H Press the End call key Calls cannot be made if the battery is almost discharged or the handset is out of range of the base station 8 ePure TAM 2nd generation ePure TAM 2nd generation Handsfree operation You can use the handsfree function to conduct calls without holding the handset in your hand and allow others present in the room to take part in the call Activating handsfree before a call 1 Press The display shows 4 Press again You can hear the ringing signal through the handset loudspeaker 2 Press to deactivate handsfree speaking Activating handsfree during a call Press To deactivate handsfree speaking again press Switch ringer off When a call is coming in press and hold the 7 key for approx 3 seconds The ringer is switched off for this call x Set speaker loudspeaker volume You can adjust the speaker loudspeaker volume during a conversation Set the desired volume using the navigation key Switch handset off D Press and hold the End call key approx 5 sec D Press and hold again the End call key to reactivate the handset Set alarm D Press gt select ClockAlari using the navigation key and press OK D Select Set Alarm using the navigation key and press OK D Select the desired alarm function e g On once enter the alarm time and press OK ePure TAM 2nd generation 9 ePure TAM 2nd generation Set alarm tone D Press lt
4. capacity Charging is electronically controlled to ensure optimal charging and care of battery in different charge states Full capacity is achieved only after several charging cycles Note Using other rechargeable battery or non rechargeable battery primary cells can be dangerous and cause malfunctions or damage to the telephone Do not short circuit the battery danger In particular avoid inadvertent shortcircuits during storage and transport e g bunch of keys metal panels or similar objects and make sure the battery do not come into contact with greasy materials When not in the handset therefore battery should be stored only in insulating packaging Ensure also that the contacts do not touch greasy parts Rechargeable battery can become warm while recharging This is a normal occurrence and is not dangerous 6 ePure TAM 2nd generation ePure TAM 2nd generation Inserting the battery Step 1 To open the battery door use a i small tool like a door key plug the tip i into the recess at the end of handset Then the door can be opened freely in the direction of the arrow Step 2 The battery compartment is situated in the handset Insert the battery in the battery compartment Step 3 Replace the handset cover Green dots Make sure you install the battery pack and fit the cover the right way round position the 3 metal contacts of the battery pack against the 3 blade contacts align th
5. desired operating mode and record a personal outgoing message Record a personal outgoing message D Press lt select Answ Machine and press OK D Select Answer Mode and press OK D Select Record also the caller can leave a message or Answer only the caller cannot leave a message and press OK Select Personalized and press OK Select Record and press OK Speak your outgoing message into the handset microphone Your personal outgoing messages can be up to 1 minute long max D Press OK to end recording The recorded personal outgoing message is played back To restore the standard outgoing message select Record also or Answer only followed by Predefined and press OK To listen to an outgoing message select Answer amp Rec or Answer only followed by Flay and press OK The outgoing message is played back To delete a personal outgoing message select Record also or Answer only followed by Delete and press OK Operating the answer machine from the handset H you have new messages on your answer machine the symbol E flashes on the display of the handset The messages are played back beginning with the most recent and over the handset loudspeaker the handset loudspeaker activates automatically ePure TAM 2nd generation 19 ePure TAM 2nd generation select Answ Machine and press OK D Select Play and press OK D Press the End call key to end playback During playback D Press OK to ope
6. digits see the following table Key Function Return to previous message Play all messages Skip to next message Delete message during playback Switch answer machine on Stop playback Switch answer machine off GECKEN Help No dial tone H Use only the telephone line cord supplied D Check that the telephone line cord is connected properly D Check that the mains power is connected properly and switched on No display D Check that the batteries are inserted correctly and fully charged Use only approved rechargeable batteries supplied H Check that the handset is switched on Press and hold the End Call key H Reset the base by removing the batteries and disconnecting the mains power Wait for around 15 seconds before connecting it again Allow up to one minute for the handset and base to synchronize ill icon flashes D Handset is out of range Move closer to the base 22 ePure TAM 2nd generation ePure TAM 2nd generation D Make sure that the handset is registered to the base see chapter Registering an additional handset H Check that the mains power is connected properly and switched on Keypad does not seem to work H Check that the keypad lock is not on I icon is not fully charing the battery in operation D Adjust the handset slightly on the base H Clean the charging contacts with a cloth moistened with alcohol D Check that the mains power is connected properly and switched on D The b
7. mislaid handsets All registered handsets ring for one minute when the Paging key on the TAM base is pressed To stop the ring press the End call key on the handset or the Paging key on the base Phonebook You can store up to 100 names and numbers in the phonebook Digits Characters Different characters are printed on each key The entries in the phonebook are sorted alphabetically VI Press long hold key change from upper case to lower case letters ABC abc Abc Press long hold key 0 to insert a pause inside a phone number P appears Short press to insert a space Adding new entries in the phonebook H Press select Phonebook and press OK Select New Entry and press OK Enter the desired name and number Press OK to save the entry Dial from phonebook D Press gt select Phonebook and press OK D Select List Entry and press OK D Select the desired entry using the navigation key or enter the first letter of the name D Press the Talk key to call the number using the keypad ePure TAM 2nd generation 11 ePure TAM 2nd generation In the phonebook menu you have the following options List Entry New Entry Delete All Direct Mem Call a programmed direct memory number Direct memory Phone numbers from the phone book can be assigned to numerical keys 1 to 9 Programming direct memory keys H Press select Phonebook and press OK Select Direct Mem and press OK Select
8. the desired memory key and press OK twice Select Add and press OK Select the desired entry from the phonebook using the navigation key and press OK Calling a direct memory number To call a direct memory number press the corresponding key for approx 3 seconds The programed number is called Calls list The control LED on the side of the handset flashes when you have one or more missed calls The calls list can contain up to 50 entries The Control LED will turn OFF once the user checks the call list To use this function the caller s number must be transmitted CLIP Contact your network operator for further information Troubleshooting How to turn off this function The Control LED will turn OFF once the user checks the call list Review the missed call log 1 Press navigation key when the handset is not in use 2 Press navigation key to browse through the missed call log 12 ePure TAM 2nd generation ePure TAM 2nd generation New voicemail light delete and and appears on the handset and the VOICEMAIL light on the telephone handset flashes and don t know why Your telephone has voicemail indication If NEW VOICEMAIL and the VOICEMAIL light on the telephone handset flashes your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them Contact your telephone service provider for more information on how to
9. SWISSVOICE ePure TAM 2nd generation Cordless digital telephone DECT WITH DIGITAL ANSWERING MACHINE User manual ePure TAM 2nd generation Welcome to Swissvoice The ePure TAM 2nd generation is a cordless telephone with answering machine designed for connection to an analog telephone network International DECT GAP standard digital technology offers excellent voice quality You can register up to 4 handsets to your base and make internal calls free of charge Please read these operating instructions carefully to familiarise yourself with and take full advantage of an benefits of your new ePure 2 ePure TAM 2nd generation ePure TAM 2nd generation Contents Keys incendie natin eA ny 4 Display symbols Range Location Battery advice ovsun nng a 6 Inserting the batter 7 Connecting the phone 7 Set date and time wees eeeeenneeeseeneeeeneee 8 Set language Making a call Keypadslock orses AAi en ESEA anak ASENG ROIA asesi a A OARA 10 PRA ODOORN 11 Paging Locate mislaid handsets eseeeeee 11 Phonebook Direct memory SET EE Troubleshooting reramai anan 12 Extending number of handsets eee 14 Conference Call creation ccceceeeeeeeneeeeeeees 15 Personal settings Advanced settings Answer Machine seeessieieieieieieiererrerererererrerererere 18 le E 22 Appana aira eee a cones ha teenvaed 24 ePure TAM 2nd generation 3 ePure TAM 2nd ge
10. access your voicemail Turn off the flashing light 1 Wait for BASE to synchronize with the network operator again due to the base cannot receive the Voice Message Waiting Indication VMWI OFF correctly the LED will not turn OFF If you listen the voice message the operator will turn the VMWI OFF The handset registered will turn OFF the LED once the base receiving the VMWI is OFF OR 2 Press OK key select to Adwanced Set then navigation key to Reset and press OK key to Confirm and press OK after this simple method is done you can see the flashing light will turn OFF but there will be some settings reset as well Calling a number from the calls lists e Open the calls list by pressing the navigation key e Select the desired entry using the navigation key H Press the Talk key to call the number or H Press OK and select a function from the list If the caller s number is suppressed only withheld is displayed The call is not entered in the call list Edit calls list D Open the calls list You have the following options Save Number Store number in the phonebook Delete Delete single entries Delete All Delete all entries ePure TAM 2nd generation 13 ePure TAM 2nd generation Extending number of handsets The delivered handset is already registered on to base station In standby the internal number of the handset is displayed You can register up to 4 handsets to your base
11. ated digital answer machine with a max recording capacity of 30 minutes You can operate your answer machine from the base and from any handset registered to the base On delivery an outgoing message for each mode Answer amp Rec and Answer only is pre recorded The answer machine is ready to use Activate deactivate the answer machine from the base Press key on the base station to switch the answer machine on or off The LED in front of TAM base lights up when the answer machine is activated doesn t light up when the answer machine is deactivated flashes when you have new message s on the answer machine Operating the answer machine from the base H you have new messages the LED under key is flashing The messages are played back beginning with the most recent e Press z Io start playback D During playback the following options are available Function Activate deactivate answer machine Repeat message return to previous message Skip to next message Start end playback Delete message during playback Adjust volume 18 ePure TAM 2nd generation ePure TAM 2nd generation Activate deactivate the answer machine from the handset e Press lt 2 select Answ Machine and press OK e Select Answ On Off and press OK D Select On or Off using the navigation keys and press OK FX is displayed when the answer machine is switched on D You must now select the
12. attery is full When the handset is fully charged 99 icon is steady on No Caller ID D Check your subscription with your network operator H The caller may have withheld their number D The record cannot be found in your phonebook Check that you havew the correct name number stored in your phonebook with the full area code I have forgotten my PIN You can reset your handset back to default setting from Advanced settings then the handset will automatically reset and the PIN will default back to 0000 Cannot register a handset to the base H You can register up to a maximum of 4 handsets to a ePure base You must de register a handset in order to register a new one D Check that you have entered the correct PIN code default 0000 H Check that you are at least one meter away from other electrical equipment to avoid interference when registering Handset does not ring D The handset ringer volume may be set to Off ePure TAM 2nd generation 23 ePure TAM 2nd generation Base unit does not ring D The base ringer volume may be set to Off Noise interference on my phone or on other electrical equipment nearby H Place your ePure at least one meter away from electrical appliances or any metal obstructions to avoid any risk of interference Appendix Using Internet cable telephone adapters on an analog port When using an analog telephone on the analog connection of an Internet or cable telephone adapter not all the
13. de Tone Normal dialling procedure on analog lines Pulse May be required for connecting older telephone systems Please refer to the relevant documentation Register Additional handsets must be registered to the base station Unregister Select the handset you want to deregister PIN You can modify the PIN code 0000 on delivery Reset This feature allows you to reset your handset back to its default settings Call Barring Use this function to ban certain phone numbers from being dialled The call barring numbers must be entered separately for each handset You can specify bar calls to up to 4 numbers each comprising up to 4 digits All phone numbers whose first digits match the specified numbers will be barred ECO Mode When ECO Mode is set to ON range selected to House Apartment or Room the base and handset power transmission is regulated and a radiation reduction is achieved when handset is near the base station When it is set to OFF the base transmission power is maximum and not regulated When it is set to Room the base transmission power is minimum and regulated Range Sel Range Selection House Apartment Room Off Note with multi handset ECO mode will be default to Off Zero Emit when set to On both base and handset power transmission is set to minimum in standby mode ePure TAM 2nd generation 17 ePure TAM 2nd generation Answer machine Your ePure TAM features an integr
14. described features in particular calling line display may function in the same way as with a standard analog telephone line This does not cause the ePure TAM to malfunction Several factors can cause a failure of specific features to function H The Internet cable telephony provider may not provide the function on its Internet cable telephony connection H The adapter used to convert Internet cable telephony to analog telephony usually supplied by the provider may not forward the functions to connected telephones or may forward them in a non analog format If this happens please check the ePure on an analog fixed line and or contact your Internet cable telephony provider Care Your telephone is a sophisticated product in terms of design and construction and should therefore be handled with care To clean the telephone wipe first with an antistatic cloth or a damp soft leather cloth and then dry using a dry cloth 24 ePure TAM 2nd generation ePure TAM 2nd generation Recycling environmental protection At the end of the product s life cycle the telephone must not be disposed of in normal domestic waste Please take it to a collection point for processing electrical and electronic equipment see symbol on Ca the product in the user manual and or packaging Some materials used in this product can be recycled if you take it to a recycling depot By recycling parts or raw materials from used products you will be making an
15. e green dot on the handset with the one on the cover align the cover top against the handset top then clicks it until middle and bottom sides click into place Connecting the phone Main power socket Telephone line socket Before you can start using your telephone you must plug in the telephone connector cable and the power adapter When the phone is delivered the battery is not yet charged To charge the battery insert the handset on the base station The battery will take around 6 hours to fully charge initial charge ePure TAM 2nd generation Ke ePure TAM 2nd generation Set date and time When setting up the telephone the first time the date and time have not been set D Press select Clock Alarm with the navigation key and press OK Select DateTime and press OK Enter date and press OK using the keypad Enter the time and press OK using the keypad Set language D The language of the display texts can be changed in the menu Press select Personal Set with the navigation key and press OK Select Language and press OK Select language with the navigation key and press OK Making a call e Dial the desired number using the keypad D Press the Talk ke Accepting a call D Incoming calls are signalled by a ring tone and a quick flashing of the contro LED on the handset H Press the Talk key and conduct your conversation Ending the call E
16. important contribution to environmental protection Please contact your local authority if you require information about collection points in your neighbourhood Disposing of the rechargeable battery By law all used batteries and accumulators must be recycled and not disposed of in domestic waste Please dispose of them according to the official regulations Take them to a recycling depot The batteries accumulators will be recycled since they may for example contain lithium Li nickel cadmium Ni Cd lead Pb cadmium Cd or mercury Hg The batteries and accumulators are labelled with symbols and information on their contents NI CD NI MH e g Warranty conditions Your telephone is subject to a guarantee from the date of purchase in accordance with the legal provisions of the country in which the telephone was purchased As evidence of the date of purchase please keep the receipt or the warranty card completed by the retailer All defects attributable to material and manufacturing faults will be corrected free of charge within the warranty period either by repairing or replacing the defective equipment ePure TAM 2nd generation 25 ePure TAM 2nd generation The warranty does not cover expendable materials battery cells defects which affect the value or use of the equipment only insignificantly and damage caused by incorrect use ordinary wear and tear or manipulation by third parties This warranty does no
17. janumero serienummer serienummer serienummer n mero de serie n mero de s rie dealer s stamp Handlerstempel sceau du vendeur timbro del rivenditore stempel van de dealer kauppiaan leima forhandlerens stempel f rsaljarens st mpel forhandlerstempel sello del comerciante carimbo do vendedor dealer s signature Unterschrift des H ndlers signature du vendeur firma del rivenditore handtekening van de dealer kauppiaan allekirjoitus forhandlerens underskrift f rs ljarens underskrift forhandlers underskrift firma del comerciante assinatura do vendedor date of purchase Kaufdatum date d achat data d acquisto datum van aankoop ostop iv ys kj psdato datum f r k pet salgsdato fecha de adquisici n data de compra 642 2510 6 000 Internet www swissvoice net Swissvoice SA 2013 20407429en_ba_b0 SV TAM 20407429 Photo may differ from the actual product
18. n the Options menu The following options are available D Repeat repeat the message D Next skip to next message D Previous return to previous message D Delete delete a message during playback Press the navigation key to adjust the playback volume Delete all old messages from the handset D Press select Answ Machine and press OK e Select Delete all and press OK e To delete all messages confirm with OK Record memo You can leave a message behind for other internal users by recording a memo D Press lt select Answ Machine and press OK Select Record Memo and press OK Recording is displayed Speak your memo into the handset microphone Press the End call key IS to end recording The memo is stored the same way as an incoming message 20 ePure TAM 2nd generation ePure TAM 2nd generation Answer machine settings D Press select Answ Machine and press OK D Select Answ Setting and press OK D Select the desired function by pressing the navigation key and press OK Ring Delay Select the desired delay or Toll Saver If you set the delay to Toll Saver your answer machine will answer after 2 rings if you have new messages If you do not have new messages it will not answer until 6 tings This enables you to save costs by hanging up before you are connected Remote Acc Switch remote access on or off HS Screening When the answer machine is on and the function activated
19. neration Keys Handset Earpiece Display Menu key OK key Redial key Talk key Key 1 Star key In standby Long press to activate deactivate the keypad lock 8 Microphone 9 Loudspeaker 10 Call Log Playback answering machine message Volume up Scroll up 11 Intercom INT key 12 End call key back to idle mode 13 Phonebook Volume down Scroll down 14 Digit keys 15 Ringer on off Key 16 Key 0 insert a space insert a pause 17 Control LED on the left side of the handset flashes when you have one or more missed calls flashes quickly with an incoming call NOORWNa TAM base 1 Page key on the bottom 2 3 Adjust volume 4 Switch answer machine on off 5 Start stop playback 6 Repeat message return to previous message 7 Skip to next message 8 Delete message during playback ePure TAM 2nd generation ePure TAM 2nd generation Display symbols vm Steady on battery s charge level Flashing battery Need s to be charged 12 03 Time c Call in progress Steady on when you are consulting the call RY log Flashing when there is missed call The phonebook is open WA Scroll up down in a list or a menu OK Confirmation On x Loud incoming call ringer has been turned off aq Handsfree active On DI Alarm is set al ECO range set to HOUSE in standy mode E ECO range set to APARTMENT in standy al mode 5 ECO range set to ROOM in
20. one When the base charging contacts beep function is turned to on you hear a beep with put handset back Handset Name To better distinguish between handsets you can give each handset a name Auto Pick up Just pick up the handset from the base to answer a call without pressing any key Auto Harig up Just hang up the handset to end a call Language Backlight To set handset LCD to ON OFF Advanced settings 16 Press select Advanced Set and press OK Select a function from the list using the navigation key and press OK Call List can set Call list type to All calls or Missed calls only If All calls is selected press Up key in idle will view all calls lists If Missed calls is selected press Up key in idle will view missed call only Conference When the feature is set to Auto if handset 1 is on line with an external caller handset 2 can seize the line and immediately join the call with handset 1 and the external caller Auto Prefix Digit Detect If the first digits of a number you are calling are identical to the digits stored they will be suppressed Prefix Num The prefix number can be 5 digits long The stored digits are added in front of the phone number when dialling with a dialling pause ePure TAM 2nd generation ePure TAM 2nd generation Recall Time Select the recall time flash time for the analogue network functionalities in your country Dial Mo
21. standy mode ECO range set to OFF in standy mode d In talk mode shows the RF strength Leaf icon Display when the Zero Emissions is on Qo Voice Mail Waiting Steady on the answer machine is activated je s Flashing you have new answer machine messages Range Location To obtain the best possible range we recommend positioning the telephone in a location central to your sphere of activity Avoid positioning the telephone in niches recesses and behind steel doors The maximum range between base station and handset is approximately 300 meters outdoors Depending on the surrounding conditions as well as spatial and structural factors the range may be less Silent zones can occur due to the digital transmission in the frequency range used even within the range depending on the structural environment In this case the ePure TAM 2nd generation 5 ePure TAM 2nd generation transmission quality may be reduced through the increased incidence of short breaks in transmission Normal call quality can be restored if you move slightly out of the silent zone If the range is exceeded the call will be disconnected unless you move back into range within ten seconds Battery advice Use only the original battery Li lon 3 7 V 550 mAh as well as the original power supply 7 5 VDC 300mA The handset operating times standby 220 hours active 12 hours and charging times apply only if the battery is charged to the defined minimum
22. station If you register your ePure handset with a third party base station or a third party handset on your ePure base station GAP you may not be able to use some functions or only to a limited extent Register new handsets Registering an additional handset with the main base station the base station you have connected to the telephone network H Press and hold down the Paging key on top of the base station for at least 10 seconds Press the menu key Using the navigation key find Advanced Set and press OK Scroll down until you find Register and press OK After a few seconds you will be asked to enter your PIN Enter the PIN default 0000 and press OK If the registration is successful you will see the handset number on the screen Press the talk key as if you wanted to make a call to make sure a dial tone is available Repeat this procedure for every additional handset you wish to add to your ePure TAM phone If the registration is not successful DH Move closer to the base station During registration the distance between handset and base must be less than 1m DH Interrupt power supply of base and handset disconnect power adapter remove battery DH Repeat the registration procedure 14 ePure TAM 2nd generation ePure TAM 2nd generation Conference Call creation During a call you can make a second internal call enquiry call switch between call partners brokering or simultaneously converse 3
23. t cover consequential damage caused by the use failure or defectiveness of the product In particular no liability whatsoever is accepted for damage to property and pecuniary loss To claim under this warranty please contact the retailer where you purchased your telephone The Swissvoice Service Center will replace it with and equivalent good or perform a repair In the case of components subject to wear e g batteries this period lasts for 6 months from the date of purchase Approval and conformity This analog telephone DECT complies with the basic requirements contained in the R amp TTE Directive 1999 5 EC on radio equipment and telecommunications terminal equipment and is suitable for connection and operation in the member state indicated on the base station and or packaging The declaration of conformity may be viewed at www swissvoice net The CE symbol confirms the conformity of the telephone with the above directive 26 ePure TAM 2nd generation Warranty Certificate voice Warranty Certificate Garantieschein Bon de garantie Certificato di garanzia Garantiebewijs Takuutodistus Garantibevis Garantisedel Garantibevis Certificado de Ga rantia Taldo de garantia device type Ger tetyp type d appareil tipo di apparecchio toesteltype laitetyyppi maskintype apparattyp apparattype modelo del aparato modelo do aparelho serial number Seriennummer num ro de s rie numero di serie serienummer sar
24. way conference call without the need for two telephone lines Internal conversation Internal call D Short press INT and enter the desired internal party If only two handsets are registered short press INT will automatically call the other handset If you receive an external call while you are on the phone to an internal call partner you will hear an incoming call alert End the internal call by pressing the End call key Press the Talk key You are connected to the external party Call transfer to another handset You are conducting an external call and you want to transfer it to another handset in your home or office H Press INT e Enter the desired number if there is more than 2 handsets D When the internal party responds press the F End call key to transfer the call to the other party Brokering Conference You are conducting an external call D Call another internal party see above D The internal party answers D Press and hold intercom key INT to start a conference call If one of the handsets presses the End call key the other handset will be connected to the external call ePure TAM 2nd generation 15 ePure TAM 2nd generation Personal settings Press select Personal Set and press OK Select a function from the list using the navigation key and press OK Handset Tone Ring Volume Ring Melody Key Tone Every time a key is pressed a brief beep is heard Docking T
Download Pdf Manuals
Related Search