Chief HB35B mounting kit
Contents
1. INSTALLATION INSTRUCTIONS MODEL HB 35B Custom Projector Bracket Unpack carton and verify contents If any listed parts are missing immediately contact a Chief Customer Service representative PARTS 1 BRACKET Custom HB i 3 WASHER Flat M8 3 SCREW Button Head M8 x 16mm 4 NUT Flange Hex 5 16 18 Figure 1 INSTALLATION WARNING IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY All components must be securely fastened to each other and to the ceiling and the ceiling must be capable of supporting five times the total weight of the installation 1 Lower custom HB bracket onto top of projector Ensure that triangle in bracket points toward front of projector See Figure 1 2 Attach HB bracket to projector using three M8 x 16mm button head screws and three M8 flat washers through three holes in the HB bracket See Figure 1 Continued Milestone AV Technologies Inc and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty ex pressed or implied regarding the2. information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document 8803 002012 Rev00 Ex Chief Manufacturing a products division of Milestone AV Technologies Cy CH 8401 Eagle Creek Parkway Savage MN 55378 2010 Milestone AV Teennologies a Duchossois Group Company Gur Mounts Your Wien e P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 e INSTALLATION INSTRUCTIONS Continued CAUTION Installing a ceiling mount requires the presence of two persons familiar with mechanical installations A third assistant is recommended VCM Housing Seat VCM in HB bracket slots Figure 2 3 Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen 4 With help of assistants lift the projector and install it to the four studs extending from the VCM housing Ensure that the VCM housing is seated in slots on HB bracket See Figure 2 5 Tighten the four 5 16 flange nuts See Figure 2 CHIEF Our Mounts Your Vision
Download Pdf Manuals
Related Search