VARO POWXG9025 high-pressure cleaner
Contents
1. 1 0 m s2 K 0 15 m s2 Page 9 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 11 MAINTENANCE AND CLEANING WARNING Always disconnect the electrical plug from the socket prior to maintenance or cleaning To ensure a long and problem free working life please take the following advice Wash out water hose high pressure hose spray lance and accessories before mounting Clean the connectors of dust and sand Rinse the detergent spraying attachment after use Clean the nozzles Any repair should always be made in an authorized workshop with original spare parts 11 1 Cleaning of inlet filter Clean the water inlet filter regularly once a month or more frequently according to use Carefully loosen the filter with a screwdriver and clean it Check that it is intact before re mounting it The inlet filter must always be fitted inside the water inlet pipe to filter out sand limestone and other impurities as they will damage the pump valves CAUTION Failure to fit the filter will invalidate the warranty 11 2 Cleaning of air vents The machine should be kept clean so as to let cooling air pass freely through the machine vents 11 3 Greasing of couplings To ensure an easy connection and that o rings do not dry up the couplings should be greased regularly 12 STORAGE FIG 10 The machine should be stored in a frost free room Pump hose and accessories should always be emptied of water prior2. 2014 VARO POWXG9025 EN RECOMMENDED ACTION Plug in machine Try another socket Try without the extension cable Check that hoses and connections are airtight Contact your nearest service centre Increase water pressure check for blockage of garden hose and or change to bigger hose Contact your nearest service centre Check that the mains voltage corresponds to specification on the name plate Leave the machine for 5 minutes to cool down Clean the nozzle with a needle and by spraying water backwards through the nozzle Try without the extension cable Allow machine to run with open trigger until regular working pressure resumes Increase water pressure check for blockage of garden hose and or change to bigger hose Clean the nozzle with a needle and by spraying water backwards through the nozzle Clean the filter Straighten out hose Contact your nearest service centre Connect inlet water Clean the filter Clean the nozzle with a needle and by spraying water backwards through the nozzle Page 11 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 14 WARRANTY This product is warranted as provided by law for a 36 months period effective from the date of purchase by the first user This warranty covers all material or production flaws excluding batteries chargers defective parts subject to normal wear amp tear such as bearings brushes cables and plugs or accessories su
3. 2014 VARO Page 8 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS 8 6 Multi nozzle Fig 7 POWXG9025 EN The pressure can for the multi nozzle be adjusted by tuning it AN WARNING Do not do this under operation to avoid that the hand hits the jet 8 7 Foam Sprayer Fig 8 1 Unscrew the container A from the foam sprayer 2 Add detergent to the container A and screw the container to the foam sprayer 3 Adjust the amount of detergent with the button B 8 8 Parking holder Fig 9 The trigger gun 11 and lance 13 can be stored during and after operation in the parking holder 18 Click the trigger gun into the parking holder 18 8 9 Patio Cleaner The patio cleaner is a powerful accessory for cleaning patio driveways etc Attach the Patio Cleaner to the lance NOTE Do not use the Patio Cleaner as a broom but let is surf smoothly over the surface 9 TECHNICAL DATA Motor TYPE Pressure Mpa Max Pressure Mpa Voltage Power Flow Water temperature Min flow of water supply Min pressure water inlet Weight 10 NOISE POWXG9025 Brush motor 9 13 5 230V 50Hz 1900W 6 5 L min Max 40 C 390 L h 0 18 Mpa 11 kg Noise emission values measured according to relevant standard K 2 Acoustic pressure level LpA Acoustic power level LwA 82 dB A 97 dB A T ATTENTION Wear hearing protection when sound pressure is over 85 dB A aw Vibration Copyright 2014 VARO
4. alcohol or medication A moment of inattention when operating a power tool may result in serious personal injury Copyright 2014 VARO Page 4 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN Use safety equipment Always wear eye protection Using safety equipment such as a dust mask non skid safety shoes a hard hat or hearing protection whenever it is needed will reduce the risk of personal injury Avoid accidental starts Ensure the switch is in the off position before inserting the plug Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely Remove any adjusting keys or spanners before turning on the power tool A spanner or key left attached to a rotating part of the power tool may result in personal injury Do not reach out too far Keep your feet firmly on the ground at all times This will enable you retain control over the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from the power tool Loose clothes jewellery or long hair can become entangled in the moving parts f there are devices for connecting dust extraction and collection facilities please ensure that they are attached and used correctly Using such devices can reduce dust related hazards 5 4 Power tool use and care Do not expect the power tool to do mor
5. direct the jet against yourself or others in order to clean clothes or foot wear Hold the spray lance firmly with both hands The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect them from being struck by debris dislodged during operation Wear goggles and protection clothes during operation Disconnect from electrical power supply before carrying out user maintenance To ensure appliance safety use only original spare parts from the manufacturer or approved by the manufacturer Do not use the appliance if a supply cord or important parts of appliance are damaged e g safety device high pressure hose and trigger gun Do not use the appliance with wet hands If the appliance is humid or wet unplug it immediately Do not put it in water Tires and tire valves may be damaged by the high pressure jet and then burst Never use the machine in an environment where there could be a danger of explosion lt is not allowed to clean asbestos containing surfaces with high pressure This high pressure washer must not be used at temperatures below 0 C WARNING High pressure hoses fittings and couplings are important for the safety of the appliance Use only hoses fittings and couplings AN recommended by the manufacturer WARNING Inadequate extension cables can be dangerous Cables on reels should always be completely unwinded to prevent the cable from overheating f an ex
6. is carried out without backflow preventer As soon as water has flown through the BA valve this water is not considered to be drinking water any more IMPORTANT Only use water without any impurities If there is a risk of sand particles in the inlet water i e from your own well an additional filter should be mounted 6 3 Safety devices The unloader valve can reduce pressure if it exceeds pre set values Locking device on trigger gun 12 The trigger gun 11 features a locking device 12 When the knob is activated the trigger gun 11 cannot be operated A thermal sensor protects the motor against overloading The machine will restart after a few minutes when the thermal sensor has cooled 7 ASSEMBLY This section will explain in details how to make you high pressure washer ready for use 7 1 Mounting of foot and wheels Fig 1 1 Fix the foot under the machine Secure the foot with the 4 screws 2 Click the wheels into the machine 7 2 Mounting of storage hook Fig 2 Slide the storage hook into the holder 7 Mounting of Patio Cleaner Fig 3 1 Insert the extension lance into to the housing 2 Fix the extension lance with the two screws to the housing 3 Insert the rotor arm into the extension lance 4 Insert the U pin to fix the rotor arm NOTE Make sure the rotor arm is properly fixed to the extension lance with the U pin 8 OPERATION 8 1 Connection of garden hose Fig 4 1 Screw the water inlet co
7. to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained Clean ventilation slots carbon brushes serviced regularly etc Your purchase receipt must be kept as proof of date of purchase Your appliance must be returned undismanitled to your dealer in an acceptably clean state in its original blow moulded case if applicable to the unit accompanied by proof of purchase 15 nee Should your appliance need replacement after extended use do not discard it with the household rubbish but dispose of it in an environmentally safe way Waste produced by electrical machine items should not be handled like normal household rubbish Please recycle where recycle facilities exist Check with your gum ocal Authority or retailer for recycling advice Copyright 2014 VARO Page 12 www varo com GARDENPRO POWERPLUS FLOWER POWXG9025 EN 16 DECLARATION OF CONFORMITY CE VARO N V Joseph Van Instraat9 BE2500 Lier BELGIUM declares that product High Pressure Washer trade mark POWERplus model POW XG9025 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives based on the application of European harmonized standards Any unauthorized modification of the apparatus voids this declaration European Directives including if applicable their amendments up to the date of signature 2011
8. to storing as follows 1 Stop the machine press the start stop switch O and detach water hose high pressure hose and nozzle 2 Restart the machine and activate the trigger of the trigger gun Let the machine run until no more water runs through the trigger gun 3 Stop the machine unplug and wind up hose and cable 4 Place trigger gun lance nozzles and other accessories in the holders of the machine The hook can be used for storage of the hose and cord Should the machine by mistake be frozen it will be necessary to check it for damage WARNING Never start up a frozen machine Frost damages are not covered by the guarantee Copyright 2014 VARO Page 10 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS 13 TROUBLE SHOOTING SYMPTOM CAUSE Machine refuses to Machine not start plugged in Defective socket Defective extension cable Fluctuating pressure Pump is sucking air Valves dirty worn out or stuck Water supply not sufficient Pump seals worn Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Amperage increase Air in inlet hose pump Inadequate supply of mains water Nozzle partially blocked Water filter blocked Hose kinked Pump and or trigger gun is leaking No water supply Water filter blocked Nozzle blocked Machine stops Machine pulsating Machine often starts and stops by itself Machine starts but no water comes out Copyright
9. 65 EU 2006 42 EC 2004 108 EC 2000 14 EC Annex V LwA 95dB A 97dB A European harmonized standards including if applicable their amendments up to the date of signature EN60335 1 2002 EN60335 2 79 2012 EN55014 1 2006 EN55014 2 1997 EN61000 3 2 2006 EN61000 3 3 2008 Keeper of the Technical Documentation Philippe Vankerkhove VARO Vic Van Rompuy N V The undersigned acts on behalf of the company CEO Hugo Cuypers Regulatory Affairs Compliance Manager Date 09 10 2013 Copyright 2014 VARO Page 13 www varo com
10. GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 1 RIESE oo sc ccnssencnencncnsnsucsecenesesenesenenenencnsssususesenusesenesesenenensnensenes 3 2 DESCRIPTION ooo s seccnsnencnesencnsnsusnsnsususesenesecenesenensnencnensesasss 3 3 PACKAGE CONTENT LIST cccssseccesseecensecceneescnnsesenseesenses 3 4 IE H 4 5 GENERAL POWER TOOL SAFETY WARNINGS 0005 4 5 1 WV OIA AVOA sociari E A EE E E 4 5 2 BICC ICA SA V e E E sees 4 5 3 Personal SAIC L 4 5 4 Power 100 use and Cale nsdn eens 5 6 5 oT r 5 6 ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH PRESSURE SUMMERS cc aescncnsncncnsscunnsecenesecenenenensnencnsnsusasnsunasesenesesenesenenensnsassses 5 6 1 Mains power connection accssisepecewsrepsensticepeacsesepeeertxtpaenetiesenteepaese pretences 6 6 2 Wat r CONIC CHOI isissssienadrise a e 7 6 3 SE E I E E EAE E P A P P A A E T 7 T7 o 2 0 ccccnssencnenencnencucnsecenesesenesenenenencnsnsususesenusesensesenenencnensenes 7 7 1 Mounting of foot and wheels Fig 1 ssscccceneecceeensneceennnneseeenaneeeeennesseeenneeseenanees 7 7 2 Mounting Of storage NOOK Fig 21 ssssssssssceessseeeesse ener ennenen ennenen nne eee 7 7 3 Mounting of Patio Cleaner Fig 3 morsen 7 8 NIE scncnsecnsnsecenusecenenencnsneunusesensesenenenensnsususesenasesenesenenensnsas T 8 1 Connection of garden hose Fig 4 wsrcccccennnnseeeeccccccceneeeeeeeennnnnsensssseesssseeeeenennaneaeens 7 8 2 Mounting of high pressure hose Fig 5 csss
11. ch as drills drill bits saw blades etc damage or defects resulting from maltreatment accidents or alterations nor the cost of transportation Damage and or defects resulting from inappropriate use also do not fall under the warranty provisions We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool Repairs may only be carried out by an authorised customer service centre for Powerplus tools You can always obtain more information at the number 00 32 3 292 92 90 Any transportation costs shall always be borne by the customer unless agreed otherwise in writing At the same time no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload Definitely excluded from the warranty is damage resulting from fluid permeation excessive dust penetration intentional damage on purpose or by gross carelessness inappropriate usage use for purposes for which the device is not suitable incompetent usage e g not following the instructions given in the manual inexpert assembly lightning strike erroneus net voltage This list is not exhaustive Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement Devices or parts which are replaced under the warranty therefore remain the property of Varo NV We reserve the right
12. e than it can Use the correct power tool for what you want to do A power tool will achieve better results and be safer if used in the context for which it was designed Do not use the power tool if the switch cannot turn it on and off A power tool with a broken switch is dangerous and must be repaired Disconnect the plug from the power source before making adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally Store power tools when not in use out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it Power tools are potentially dangerous in the hands of untrained users Maintenance Check for misalignment or jammed moving parts breakages or any other feature that might affect the operation of the power tool If it is damaged the power tool must be repaired Many accidents are caused by using poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control Use the power tool accessories and cutting tools etc in accordance with these instructions and in the manner intended for the particular type of power tool taking into account the working conditions and the work which needs to be done Using a power tool in ways for which it was not intended can lead to
13. ions can cause you to lose control of it 5 2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate Power tool plugs must match the outlet Never modify the plug in any way Do not use adapter plugs with earthed power tools Unmodified plugs and matching outlets will reduce the risk of a lethal electric shock Avoid body contact with earthed surfaces such as pipes radiators kitchen ranges and refrigerators There is an increased risk of a lethal electric shock if your body is earthed Do not expose power tools to rain or wet conditions If water gets inside a power tool it will increase the risk of a lethal electric shock Do not damage the cord Never use the cord for carrying pulling or unplugging the power tool Keep the cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of a lethal electric shock When operating a power tool outdoors use an extension cable suitable for outdoor use Using a cord suitable for outdoor use reduces the risk of a lethal electric shock f operating a power tool in a damp location is unavoidable use a power supply protected by a residual current device RCD Using an RCD reduces the risk of a lethal electric shock 5 3 Personal safety Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool when you are tired or under the influence of drugs
14. o com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN HIGH PRESSURE WASHER 1900W POWXG9025 1 APPLIANCE Your high pressure cleaner has been designed for outdoors cleaning Cleaning of machines vehicles structures tools facades terraces gardening tools before using the appliance for your own safety Your power tool should WARNING Read this manual and general safety instructions carefully only be passed on together with these instructions 2 DESCRIPTION FIG A 1 Water inlet coupling 10 High pressure hose 2 Electrical plug 11 Trigger gun 3 Storage hook 12 Trigger lock 4 Water outlet 13 Lance 5 Switch 14 Multi Nozzle 6 Trolley handle 15 Foam sprayer 7 Nozzle storage 16 Turbo Nozzle 8 Foot 17 Patio Cleaner 9 Wheel 18 Parking holder 3 PACKAGE CONTENT LIST Remove all packing materials Remove remaining packaging and transit supports if existing Check the completeness of the packing content Check the appliance the power cord the power plug and all accessories for transportation damages Keep the packaging materials as far as possible till the end of the warranty period Dispose it into your local waste disposal system afterwards WARNING Packing materials are no toys Children must not play with plastic bags Danger of suffocation 1x washer machine with wheels 1x 3m pressure hose 1x trigger 1x trolley 1x extended lance for gun 4x screw for trolley 1x soap bottle 1
15. potentially hazardous situations 5 5 Service Your power tool should be serviced by a qualified specialist using only standard spare parts This will ensure that it meets the required safety standards 6 ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH PRESSURE CLEANERS The appliance is designed solely for outdoor private use and NOT for commercial use Please keep it away from heat direct sunlight moisture and rain frost and sharp edges Do not let people who have not been trained in the use of a high pressure washer nor read the instruction manual operate the machine High pressure cleaners shall not be used by children or untrained personnel Children should be supervised to ensure that they do not play with the appliance Before starting up your machine please check it carefully for any defects If you find any do not start up your machine and contact your local distributor Copyright 2014 VARO Page 5 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN Check especially the insulation of the electric cable should be faultless and without any cracks If the electric cable is damaged an authorized local service centre should replace it jet must not be directed at persons live electrical equipment or the A WARNING High pressure jets can be dangerous if subject to misuse The appliance itself WARNING Do not use the appliance within range of persons unless they wear protective clothing Do not
16. ssssseeeeessseeeeeeeesee ennenen ennenen neee 7 8 3 Mounting of lance and nozzle Fig ssssssssssseeessseeeesee neee nnn e ennenen ee 8 8 4 Walor conne COl vssaussseruauesseisernsrerserssancneeesne vari adessouauteieunstessasantanavausidaricuausuressstiniee 8 8 5 Start stop Of the MAGCIING sicsiscis ci csacatccetsnasteedesalacsenedceeedessiauatsweubeatoontacucesteaeeneaiaeten 8 8 6 MUI DOZZIC FIO T sesi R EE ERER 9 8 7 Foam Sprayer FIQ 0 rerea E E E E EE 9 8 8 Parking Nolder Fig 9 ren 9 8 9 Pallo Glean ininsinnannnannnainnnnnaiennienainneneanaenaenaanat 9 9 TECHNICAL DATA ccccceseecceseecenseecenseecenseseensesennsesenseesenseesons 9 Copyright 2014 VARO Page 1 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 10 H 9 11 MAINTENANCE AND CLEANING cccceessssssseeeeeeeesseeeeees 10 11 1 Cleaning OF INIGE TINGE vesscasecectcssercnnuccacesheatseatncesieantaacacsasendsaehmadenentaadseucbonseactecaned 10 11 2 Cleaning of air Vents diccavsctisntaehacrases sleet ennenen eenn ennenen eee 10 11 3 GIEASING Of COUDNIGS sicsicssctsscescesscewticbsccdactacentceieseestessnieisdevedaetaneesensneesieescestcs 10 12 Gee ISIN HHH 10 13 TROUBLE SHOOTING ss eee enn ee senenn enne 11 14 I 5555 cis cet sage vee cat dew eee cast au dewtiecipo coun esevawseevececuucsteevute 12 15 L HHH 12 16 DECLARATION OF CONFORMITY cccccesseeeseesseeseeenees 13 Copyright 2014 VARO Page 2 www var
17. tension cable is used the plug and the socket must be waterproof and comply with the below mentioned requirements for length and cable dimensions 1 0 mm max 12 5 m 1 5 mm max 20 m Ifthe electric cable is damaged it must be replaced by the manufacturer or his service agent or similarly qualified person in order to avoid a hazard 6 1 Mains power connection The following should be observed when connecting the high pressure washer to the electric installation The electric supply connection shall be made by a qualified electrician and comply with IEC 60364 1 It is recommended that the electric supply to this appliance should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms Copyright 2014 VARO Page 6 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 6 2 Water connection Connection to the public mains according to regulations Inlet hose can be connected to the water mains with a max inlet pressure of 10 bars This high pressure washer is in Europe only allowed to be connected with the drinking water mains when an appropriate mains backflow preventer has been installed Type BA according to EN 1717 The length of the hose between the backflow preventer and the high pressure washer must be at least 10 metres to absorb possible pressure peaks min diameter 1 inch Operation by suction for example from a rainwater vessel
18. ter hose to the water supply by means of the quick connector inlet water max pressure 10 bar max temperature 40 C 3 Turn on the water 8 5 Start stop of the machine The trigger gun and lance is affected by a thrust during operation therefore always hold it firmly with both hands IMPORTANT Point the nozzle at the ground system based on waterpressure 1 This high pressure cleaner is equiped with an automatically sart stop 1 Check that the machine is in upright position NOTE Do not place the machine in high grass 2 Release the trigger lock 3 Activate the trigger of the trigger gun and let the water run until all air has escaped from the water hose 4 Press the Start stop switch 5 Activate the trigger of the trigger gun 6 Always adjust the distance and thus the pressure of the nozzle to the surface which is to be cleaned Do not cover the machine during operation or use it in a room without adequate ventilation NOTE If the machine is left or not used for 5 minutes it must be switched off on the start stop switch 5 O 1 Press the start stop switch O 2 Disconnect the electrical plug from the socket 3 Shut off the water supply and activate the trigger of the trigger gun to relieve the machine of pressure 4 Lock the trigger gun When releasing the trigger of the trigger gun the machine automatically stops The machine will start again when you re activate the trigger gun Copyright
19. upling tight on to the water inlet Note The inlet filter A must always be fitted in the water inlet pipe to filter out sand lime stone and other impurities as these will damage the pump valves Caution Failure to fit the filter will invalidate the guarantee Connect the garden hose with a standard quick coupling 8 2 Mounting of high pressure hose Fig 5 1 Attach the high pressure hose to the trigger gun and machine Detach the high pressure hose by pressing the pawl A or button B Copyright 2014 VARO Page 7 www varo com GARDENPRO POWERPLUS HIGH QUALITY TOOLS POWXG9025 EN 8 3 Mounting of lance and nozzle Fig 6 1 Push the lance into the trigger gun 2 When inserted turn it Caution Make sure the lance is properly fixed to the gun 3 Attach the nozzles Caution When attaching the nozzle the button A on the nozzle should come out again Check before activating the trigger that the nozzle is properly fixed 8 4 Water connection An ordinary 1 2 garden hose of min 10 m and max 25 m will be suitable sand particles in the inlet water i e from your own well an additional filter IMPORTANT Only use water without any impurities If there is a risk of should be mounted 1 Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the machine Note Check that the filter is fitted in the water inlet pipe and that it is not clogged up 2 Connect the wa
20. x main manual 1x adjustable nozzle 1x needle amp nozzle cleaning instruction 1x turbo nozzle 1x patio cleaner 1x male water inlet connector i When parts are missing or damaged please contact your dealer Copyright 2014 VARO Page 3 www varo com GARDENPRO POWER _US HIGH QUALITY TOOLS POWXG9025 EN 4 SYMBOLS The following symbols are used in this manual and or on the machine The jet must not be directed at persons In accordance with essential pets live electrical safety standards of applicable equipment or the European directives appliance itself Class II The machine is double insulated Earthing wire is therefore not necessary Read manual before use 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions Failure to heed warnings and follow instructions may result in electric shock fire and or serious injury Keep safety warnings and instructions for future reference The term power tool in the safety warnings refers to your mains operated corded power tool or battery operated cordless power tool 5 1 Working area Keep working area clean and well lit Untidy and dark areas can lead to accidents Do not operate power tools in potentially explosive surroundings for example in the presence of inflammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders at a distance when operating a power tool Distract
Download Pdf Manuals
Related Search