Home

Grundig 47 VLE 9474 BL 47" Full HD 3D compatibility Smart TV Wi-Fi Black

1. yellow ccoo blue 4 gt 44 b gt Selects pages in teletext Selects activates various functions in the menus Switches to double character size in teletext Selects the previous title previous picture in the file browser Refreshes a teletext page Selects the next track next picture in the file browser Stops scrolling through pages in teletext Starts a fast reverse search in the file browser Reveals answers in teletext Starts a fast forward search in the file browser Starts the recording only for digi tal television channels the record ing is made on an external data medium Starts playing a programme from an external data medium Repeats a recorded programme Starts playing in DLNA menu i Freeze frame if no external data medium is connected Playback pause Time shift mode only for digital television channels and when an external data medium is con nected Pauses the file being played in DLNA menu m Ends playback of a programme from an external data medium Ends a recording or playback in time shift mode Splits the screen in teletext Ends playing in DLNA menu Selects different audio languages only for digital television chan nels gB Selects different subtitles only for digital television chan nels Note m Your TV supports remote control feature for Apple iPhones and Android phones Depending on the features of your TV you may control your TV b
2. Select the line Start Start recording with V or A and enter the date time with 1 0 Select the line End Stop recording with V or A and enter the date time with 1 0 Save the data with ee green The programme is preset Press MENU to exit the menu Notes m Before the timer recording begins a warn ing message appears with a 20 second countdown You can switch over to the pro grammed television channel m If the timer recording starts during playback playback is not interrupted recording takes place automatically in the background as long as you do not select Yes when the timer countdown message is shown Editing recording data in the timer menu You can edit the data for programmed timer recordings 1 Select the timer menu by pressing GUIDE veee yellow and eeee blue in succes sion The SCHEDULED EVENTS menu ap pears 2 Select the title of the programme to be changed with w or A and activate the timer position with e green The input menu is displayed 3 Select the required option with v or A and edit the data with 1 0 and or gt 4 Save the changes with ee green The timer has been changed 5 Press MENU to close the menu Deleting recording data in the timer menu You can delete the data for programmed timer recordings 1 Select the timer menu by pressing
3. or gt 2 Select the line Volume with v or A and change the volume with or gt Exiting the setting 1 Press MENU to end the setting ENGLISH 23 TELEVISION OPERATION Basic functions Switching on and off 1 Switch the television to standby with the pow er switch ON e OFF 2 Press 1 0 or P or P to switch on the television from standby mode 3 Press to switch the television to standby Selecting channels 1 Press 1 0 to select presets directly 2 Select channels step by step with P or P 3 Open the channel list with OK select the preferred television channel with w A or gt and press OK to confirm Exit the channel list with MENUk Selecting channels from lists You can select channels from various lists e g all channels FAV 1 to FAV 4 1 Press FAV to open an overview of pro grame tables The overview is displayed 2 Select a channel list with A or W and open it with OK 3 Select a television channel with v A or gt and press OK to confirm 4 Press MENU to exit the channel list Selecting a preset AV channel 1 Open the Select Source menu with f 2 Select an AV preset with w A or gt and press OK to confirm 3 Use 1 0 to switch back to the television channel Adjusting the volume 1
4. Note m GRUNDIG 3D Glasses supplied with the product are inactive 3D glasses Inactive 3D glasses are also sold separately Please contact your dealer from where you have purchased your TV to obtain more information about purchasing Watching 3D content Notes m The 3D function is supported in the Air Cable Satellitee and DLNA sources or external devices connected to the HDMI gt COMPONENT YPbPr VGA AV1 AV2 S WHS or USB inputs m When watching 3D in PC mode there may be a distortion in the 3D image if there are black areas around the video E Side by Side and Top Bottom modes can only be activated for 1280 x 720p 50 60 Hz 1920x1080i50 60 Hz and 1920x1080p 24 30 50 60 Hz resolu tions in Air Cable Satellite and COMPONENT YPbPr sources m The 3D experience depends on the format and features of the movie resolution sharpness etc being played m If 3D mode is activated for a picture which is not in 3D the picture on the screen may appear blurry both with or without the 3D glasses m The 3D effect may degrade if you watch 3D images under fluorescent light In such cases either reduce the light or turn off the lamp 3D FUNCTION m Your TV will switch from 3D mode to 2D mode for the following if the program table or EPG information is displayed the channel or the source are changed playback of a 3D film is completed or the next film sta
5. OPERATION AS A PC MONITOR Connecting a PC Selecting presets for the PC Settings for PC mode OPERATION WITH A COMMON INTERFACE What is a Common Interface Inserting the CA module Access control for Cl module and smart card 79 79 80 80 81 84 85 SPECIAL SETTINGS Searching for digital television channels from a satellite automatically Searching for digital television channels from a satellite manually LNB settings Settings for motorised antennas DiSEqC 1 2 Searching for digital terrestrial TV channels automatically Searching for digital terrestrial TV channels manually Tuning analogue television channels Changing stored analogue channels Displaying signal information Deactivate and activate HbbTV Deactivate and activate digital teletext INFORMATION Product Fiche Other information Service information for dealers Environmental note Troubleshooting ENGLISH _3 SETUP AND SAFETY Please note the following instructions when setting up the television set m This television is designed to receive and dis play video and audio signals All other uses are expressly prohibited m The ideal viewing distance is five times the diagonal screen size m Light falling on the screen impairs picture quality m To ensure the device is always adequately ventilated make sure there is sufficient space between the television set and nearby furni ture m The television is designed for use in dry ro
6. Safely remove disk 1 Select the line Safely Remove Disk with V or A and press OK to confirm Note m The disk can now be removed from the socket Selecting external data media If several external data media are connected to the television you can select the preferred data medium 1 Select the line Disk with W or A 2 Select the preferred data medium with or gt 3 Press MENU to end the setting 52 ENGLISH Selecting a partition on the external data medium If the external data medium features several par titions select the partition you would like to use 1 Select the line Partition with W or A 2 Select the partition you wish to use with or gt 3 Press MENU to end the setting Testing the external data medium You can subject external data media to a test and establish whether they are suitable for the chosen functionality 1 Select the line Disk with w or A If several data media are connected select the preferred data medium with or gt 2 Select the line Partition with W or A If several partitions are available select the partition you wish to use with or gt 3 Select the line Check Disk with w or A and press OK to confirm Information on the data medium is dis played 4 Press MENU to end the setting USB RECORDING Pausing time
7. m Folders that appear as unknown in DLNA application cannot be played by the TV Installing the codec to your computer can solve this problem MULTI MEDIA SERVER MODE m Audio files played through DMS device Start playback support following formats that have obtained 1 DLNA certificate AAC_ADTS_320 LPCM MP3 WMABASE and WMAFULL a fil layed th h DMS devi nee aleio Emak that hove 2 Select the desired title with v A obtained DLNA certificate JPEG_LRG or gt JPEG_MED and JPEG_SM 3 Press gt to start playback Select the content folder on DMS device with W A or gt and confirm with OK All titles are displayed Other playback options 1 Press fil to pause playback 2 Press gt to resume playback 3 Press or gt until you reach the desired file Press ll to stop playback 5 Pss m to return to the DMS list page Press GUIDE to exit the DLNA function Note m Also you can select following playing functions from the menu TXT opens closes the playing functions menu gt starts playing ll pauses playing flli stops playing 44 or gt searches pictures C selects replay 2E selects playing list lt displays the information for the title being played ENGLISH 49 USB RECORDING Information on recording and playing television
8. ENGLISH 87 SPECIAL SETTINGS Creating lists of favourites You can select your favourite channels and save them in up to four favourites lists Fav 1 to Fav 4 l In the PROGRAME TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with v or A 3 Use or gt to push the channel into one of the favourites lists 1 to 4 and press OK to confirm The position in the favourites list is marked with You can enter the same channel in more than one favourite list Each favourite list can store up to 250 channels Note m Channels can also be deleted from favour ites lists Select the channel to be deleted with W A or gt and delete it with OK Exiting the settings 1 Press MENU to end the setting 88 ENGLISH Displaying signal information for digital channels only 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with W or A and press OK to confirm Select the line Signal Information with V or A and press OK to confirm Information on the channel network modulation symbol rate quality and signal strength is displayed Notes m The signal information changes in accord ance with the current input source The signal properties are displayed in the lower section of the menu The further the bars for Quality and Signal Streng
9. The SETTINGS menu appears a VA SETTINGS Menu English Audio English Subtitle English Subtitle Mode Ojjj Date and time settings Date amp Time Time Adjustment Time Zone Note m Additional operations are explained in the following sections Language settings Changing the menu language 1 Select the line Menu with w or A and press OK to confirm The Select Menu Language menu appears 2 Select the menu language with gt V or A and press OK to confirm 3 Press MENU to finish the setting Changing the audio language only for digital television channels You can define a primary and a secondary audio language 1 Select the line Audio with W or A and press OK to confirm The Select Audio Language menu appears 2 Select the audio language with gt V or A and then use e red to set it as the primary audio language or use ee green to set it as the secondary audio language The primary and secondary language is display at the top right in the menu 3 Press MENU to end the setting Changing the subtitle language and subtitle mode only for digital television channels You can switch the subtitles on and off select the subtitle language and allocate a second subtitle language 1 Select the line Subtitle with v or A and press OK to confirm The Select Su
10. igital signals For connecting digital AV amplifiers or AV receivers HDMI3 10 ENGLISH Socket for audio input for a PC VGA socket video input for PC Antenna socket for the satellite antenna DVB S Antenna socket for a DVB T DVB C and analogue antenna HDMI socket audio video input HDMI socket audio video input OVERVIEW HDMI4 HDMI socket Controls on the television set audio video input ON e OFF Power switch switches the televi USB2 HDD USB socket for external sion into standby mode and off data media and i ne PVR function O I Switches the television on and back into standby mode LAN Network cable connection l socket V V Adjusts the volume selects menu functions Q Headphone jack 3 5 mm jack plug MENU Opens the menu Sockets for audio output Select a menu option with P or P AV2 Activate the function with Video Video socket for lie Heese a F lal with 7 V t or V E Dara A for Press MENU to quit the menu USB1 USB socket for external Opens the pre selection for data media without a power AV channels supply of their own and In the menu press P or P PVR function to select and press S to HDMII HDMI socket confirm audio video input P P Switches the television on from CI Common Interface Slot standby selects channels in steps selects function in the menu ENGLISH 11 OVERVIEW The remote control Main functions Switches o
11. name FAV1 for this purpose select with W A and gt the push button 4 and delete the character with OK 4 Select the required character numeric with V A and gt and confirm with OK Repeat the procedure for further characters numerics Select ABC for uppercase and abc for lower case and confirm with OK Select 123 for numbers and symbols and confirm with OK 5 Confirm the new name select the push button Submit with V A or gt and confirm with OK 6 Press MENU to end the seting SETTINGS Picture settings Notes 1 Open the menu with MENU m You can only select the Mpeg NR function on digital and AV presets 2 Select the menu item PICTURE SETTINGS with w or A and press OK to confirm The PICTURE SETTINGS menu appears from artefacts pixel blocks from digital programmes due to MPEG compression a such as from DVB T receivers or O PICTURE SETTINGS DVD players m The Film Mode detects and processes feature films automatically for all channel 3D Settings sources This means you will always receive ning an optimal picture This functions in the modi 480i 576i and Brghinies EG 1080i in TV playback and for other channel Mpeg NR reduces any interference a sources Contrast 100 If the Film mode is switched on for pro Sharpness A grammes without
12. Then select the Automatic Channel Search with w or A and press OK to confirm Confirm the line Select Satellite with OK and select the preferred satellite with w A or gt Start the scan with e red Continue the adjustment by step 7 of the chapter Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 88 If the level is displayed in green you can record HD channels without any problems SETTINGS Tuning terrestrial television channels DVB T 1 In the Source Setup menu in the Connec tion Typex line select the option Air with or gt Select the line Scan Type with w or A Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Caution m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna Select the line Active Antenna Power with W Or AA Switch on the antenna power supply for the antenna with or gt On Start th
13. or A and press OK to confirm Select the input source Satellite with gt V or A and press OK to con firm Select the line Automatic Channel Search with w or A and press OK to confirm The menu appears Select the line Select Satellites with w or A and press OK to confirm The SELECT SATELLITE menu appears Select a satellite with v or A and press OK to confirm 7 Select the line Scan Mode with w or DAK Select the scan mode with or gt for unencrypted channels for encrypted channels only or both 8 Select the line Service Type with w or DAK Use or gt to select whether you want to search for television channels TV only radio stations only Radio or both Radio TV 9 Select the line Network Search with w or A Select the option On with or gt If the Network Search is set to On the data will be accessed via the new tran sponder of the network which has been set 10 Start the scan with e red Note m If the previously stored channels should be retained in the channel list and the new channels found be added to it then press ee green If e red is pressed the saved channels will be deleted from the current channel list The Results menu appears and the scan for TV channels begins Depending on the nu
14. playback is not interrupted Recording takes place automatically in the background as long as you do not select Yes when the timer countdown message is shown Set the lead follow up time With this function you can change the recording time set by the electronic TV guide If you think that a program will start a few min utes earlier or will end several minutes later you can add up to 60 minutes to this time 1 Display channel information with GUIDE 2 Switch to the timer function with yellow and then select the Personel recording time edit menu with ee green peee 3 Change the start time with or gt Use W to switch to the End row and change the end time with or gt 5 Save the setting with ee green 6 Switch off the program information with GUIDE USB RECORDING by manual data entry You can preset up to 25 programmes for timer recording 1 Press GUIDE to display channel informa tion The electronic TV guide appears Open the MAKE SCHEDULE menu by pressing eee yellow twice Select the line Type with v or A and select the option Recording with or gt Select the line Channel with w or A and select the channel with or gt Select the line Mode with w or A and select the preferred mode Oncex Every Day or Weekly with or gt
15. to confirm Notes m In WEP encryption system more than one network password can be assigned to the network Your television can connect the network only with the password in level one m For TV to discover the wireless modem on the network the network name should support ASCII characters 8 Select Connect with e red to establish the modem connection Connecting Please wait message will be displayed 9 Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success lnternet Connection Success messages will be displayed 10 Press MENU to end the setting Note m f you do not have a dynamic network follow the instructions in manual connection section ENGLISH 35 NETWORK INSTALLATION Manual connection Certain networks require Static IP address If your network requires a Static IP address you must enter the IP Address Netmask Gate way and DNS values manually You can ob tain your IP Address Netmask Gateway and DNS values from your Internet Service Provider ISP 1 2 Open the menu with MENU x Select menu item INTER CTIVE TV with V or A and press OK to confirm INTER CTIVE TV menu is displayed Select the line Connection Type with W
16. with 44 or gt P 2 Press gt to resume normal playback Rotating pictures picture files only You can rotate pictures by 90 1 During playback press or gt to rotate the pictures by 90 62 ENGLISH Repeat functions Options One Repeat the current track will be repeated All Repeat all tracks will be repeated 1 Switch off the repeat function before play back with TOOLS 2 Start playback with P gt 3 Deactivate the function with TOOLS The display changes to None Repeats repeat TELETEXT OPERATION Note m If you only want to use this normal video text disable the digital video text see page 89 TOP text or FLOF text mode 1 Press TXT to switch on teletext 2 Select teletext pages directly with 1 0 or step by step with w and A Return to teletext page 100 with Note m At the bottom of the screen there is an info bar with red green and depending on the channel yellow and blue panels Similarly the remote control also features buttons with different colours with which these pages can be selected 3 Go back a page with e red Go to the next page with ee green 5 Select a particular chapter with eee yellow 6 Selecta particular subject with eeee blue 7 Quit teletext with TXT Normal text mode 1 Press TXT to switch on teletext 2 Press 1 O to se
17. 0 FUNCTION ___ Navigation and text input during regis tration 1 Open the menu Inter ctive Applications with The registration screen for GRUNDIG AppLICATION store will be displayed Welcome to Qeecisrer Start registration with OK Select the required text field with w A or gt and confirm with OK The virtual keyboard is shown Notes on data entry m Select the required key assignment language for the keyboard with ee green m The data is entered with the virtual keyboard Select the required letters numbers with and confirm with OK m To switch from upper case to lower case select the Shift button and confirm with OK A mobile keyboard can be displayed with e red m With green the language key assignment of the keyboard can be changed m The last character number can be deleted with eeee blue The complete entry can be deleted with eee yellow m If the input is complete for the line it must be sent Use W A or gt to select the button x and confirm with OK The keyboard is hidden yee 38 ENGLISH Creating a GRUNDIG SMART APPS account If you are using the function GRUNDIG applLl CATION storex for the first time you should set up personal access By registering you receive varied information on the Grundig applications 1 Open the menu Inter ctive Appli
18. 1 Select the Quick Apps menu with 2 Press ee green to enter the GRUNDIG Online store Note m Press e red to exit the GRUNDIG Online Store Downloading and installing internet applications 1 Select the desired category in GRUNDIG online store with W or A and press gt to enter application field or select the application you want with the numbered buttons l Most Popular 2 Highest Rated 3 Release Date or to search for a specific application press ee green and use the virtual keyboard to enter a search term SMART INTER ACTIVE TV 2 0 FUNCTION 2 Select the application you want to download with w A and gt and press OK to confirm Information on the application will be displayed 3 Press eeee blue to download and install the application Application will be downloaded and installed Notes m You can start the application by pressing eeee blue button m Continue to download applications by pressing e red button Uninstalling internet applications 1 Select the desired category in GRUNDIG appLICATION store with W A and gt to enter application field 2 Select the application you want to uninstall with V A and gt and press e red to confirm A safety indication is displayed 3 Confirm the operti
19. 128 As this feature is optional it is not available in all products Analogue reception ranges C02 C80 special channels SO1 S41 Preset channels All Channels 6000 Satellite DVB S 1000 Cable DVB C or 99 Analogue 1000 Terrestrial DVB T or 99 Analogue 9 AV 2 USB Weight approx 20 kg Dimensions W H D 108 3 cm 64 6 cm 5 cm Technical changes and errors reserved INFORMATION Service information for dealers C Only operate the television with the power supply power The product complies with the following EU di rectives cord provided Power consumption values and classes are speci fied according to the regulations 2009 642 and 2010 1062 and the standards EN62087 and EN62301 as per European Union framework di rectives 2009 125 EC and 2010 30 EU With this note Grundig declares that this appli ance is in conformity with the main and other rel evant terms of the 1999 5 EC directive To obtain a copy of the Declaration of Confor mity Doc please submit your request by using the contact information at www grundig com download doc This appliance can be operated in the following European countries Dar Pee oo cn ey ez 0 amp oe ree fes me oofce Huy A a noje er Pro se Pst sk fr This appliance can also be operated in countries outside Europe Please observance the restrictions for the follow ing countries For customers in France Out
20. 7 Select the desired line with w or A and confirm with OK The GRUNDIG applLICATION store menu is displayed and the standard applications are loaded 8 After a short time an information message is displayed confirm it with OK ENGLISH 39 SMART INTER ACTIVE TV 2 0 FUNCTION ___ Selecting applications 1 Select the Quick Apps menu with 2 Press e red button to enter the GRUNDIG appLICATION store menu 3 Select application categories with w or A and press gt lt to enter application field 4 Select the required application with w A or gt and press OK to confirm Main menu of the application will be displayed after a short while Notes m Ifyou attemptto start Inter ctive applications without wire or wireless adapter connected the related warning is displayed on the screen m If your wire or wireless adaptor is connected but you cannot receive IP or internet is not connected the Inter ctive applications cannot be started In this case check Network connection settings See page 31 or 34 40 ENGLISH GRUNDIG Online Store GRUNDIG online store is an online depot where you can download many applications that you may use on your TV In the GRUNDIG appLICATION store menu some applications are installed at the factory The GRUNDIG online store includes a large selection of other applications which you can download
21. Adjust the volume with ail Switching sound on off 1 Press S to mute the sound or switch it on again 24 ENGLISH Displaying information 1 Display information press repeatedly The display disappears automatically after a short while Freeze frame If you wish to view a particular scene for longer you can freeze the frame of the current pro gramme 1 Activate the freeze frame function with Ii 2 End the freeze frame function with Ill Note m f an external data medium is connected to the television the time shift function is activated with I The time shift function is described on page 53 Picture settings Various picture settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Picture Mode with VW or AK 3 Select User Eco TV Vivid Natural Movie Sports or Game by pressing or gt You can change the User picture setting see Picture settings on page 21 Note m Picture setting Gamex can only be selected in HDMI Component and PC modes TELEVISION OPERATION Audio settings Various audio settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Sound Preset with DW or A 3 Select the audio setting User Music Natural or Speech by pressing or gt You can change th
22. After a short time the main application menu is displayed Note m The settings and operating instructions for the BABYWATCH are available in the user guide for the camera ENGLISH 47 MULTI MEDIA SERVER MODE Playing the video music and image files with home network connection With DLNA menu of your television you can easily access Video music and photo files on server and thanks to DMR feature you can auv tomatically start and stop media playing on de vices with DMC feature Notes m You can share your video music and image files through devices such as PC mobile phone or NAS Network Attached Storage that function as DMS Digital Media Server compatible with DLNA m If the DMS device and the TV are connected to the wireless network at the same time there may be lags and freezings during video playback m TV can also operate with DMS software that can be installed on a computer but it is not guaranteed that it will run in full compatibility with software without a DMS certificate m Perform the following steps for a sample DMS set up Open Windows Media Playerll i on a computer with Windows operating system In Library tab select Media Sharing tick on the Share my media box on the window that appears and then select OK The new window displays the IP numbers of connected devices To enable the TV to detect the computer you need to select the television s IP number If IP is no
23. HDD socket of the television and the corresponding socket of the data medium external hard disk using a USB cable or insert the USB plug of the USB memory stick into the USB1 socket of the television Notes m The USB1 socket of the television sup plies a maximum power of 500 mA in ac cordance with USB specifications External hard disks which require more power may therefore only be connected to the USB2 HDD of the television m If you use a network cable for external hard disks which have been connected to the USB2 HDD socket of the television this network cable must also be disconnected from the power supply when the television is switched off m External data media may not be disconnect ed from the television while files on the data medium are being accessed Settings for USB recording Selecting the menu 1 Open the menu with MENU 2 Select the menu item USB RECORDING with W or A and press OK to confirm The USB RECORDING menu appears USB RECORDING PN PRnP Auto Preview Permanent Timeshift 381 1 008 min 288 min ENGLISH 51 USB RECORDING Switching on automatic preview If the automatic preview is switched on a pre view of the selected file appears in the file browser 1 Select the line Auto Preview with W or A 2 Switch on the function with or gt On 3 Press MENU to end the setting
24. Select the line SRS Sound Preset with w or A 4 Select the sound effect Music Movie Natural or Speech with or gt Under licence from SRS Labs Inc StudioSound HD SRS and the SIS symbol are trademarks of StudioSound HD SRS Labs Inc Equalizer Equalizer offers a sound setting User that you can create Equaliser appears in the menu when Sound modex is selected as Spatial or Normal and Sound Medium as User 1 Select Equalizer with w or A and press OK to confirm The EQUALIZER menu appears Note m If the SRS SSHD setting has been selected in the Sound Modex line the Equalizer line will not indicate 2 Select the frequency bandwidth 120Hz with W or A Set the preferred value with or gt 3 Set the next frequency bandwidth with w or A and repeat the setting 4 Press to save the setting Audio description Audio subtitles Audio description is an additional audio channel for visually impaired persons Descriptions are provided of activities surroundings changes of scene gestures and actors facial expressions This audio channel is transmitted simultaneously with the normal sound on digital channels Avail ability depends on the respective channel and broadcaster 1 Select the line Audio Description with w or A and select the option On with
25. Select the option Diale with w or A and press gt to confirm The line Please input the country code is activated 2 Confirm the line Please input the country codex with OK Select the country code with W or A and press OK to confirm 3 Select the line Please input the phone with V or A and press OK to confirm Enter each character of the phone number on the virtual keyboard with w or A and press OK to confirm If the number is complete use W A and gt to select the Enter button and confirm with OK 4 To make an audio call use W or A to select Voice Call option and press OK to confirm Accepting an incoming call with Skype You can accept incoming calls with Skype while you are watching TV Notes m To enable incoming conversations to be accepted the Skype application must remain activated To do this when logging off use w or A to select the End button and confirm with OK Then deactivate the GRUNDIG appLICATION store menu with The Skype application runs in the background m While watching TV from all sources except USB all incoming Skype calls will be accepted While USB source is in use incoming Skype calls will not be accepted but an incoming call notification will be displayed 46 ENGLISH 1 If there is an incoming call with Skype while you are watching TV with S
26. USB plug of the USB memory stick into the USB 1 socket of the television set Removing the external data media Before removing the external data medium log off the data medium 1 2 Open the menu with MENU Select the menu item USB RECORDING with W or A and press OK to confirm Select the line Safely Remove Disk with V or A and press OK to confirm Note m The data medium can now be removed from the socket USB OPERATION The file browser The file browser displays video audio and picture files stored on external data media If an external data medium contains files in different formats you can when necessary filter out the formats not required Main menu of the file browser 19 10 28 06 2010 VIDEO FILES QO ROOT Ea Music aa Film Selected data format Name of the data medium Total number of folders on the data medium Preview of the selected file Information on the external data medium aout WON Menu navigation Settings in the USB setup menu Selecting the menu 1 Press mhp x use W A or gt to select the preset USB and press OK to confirm 2 Open the menu with MENU 3 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Note Additional functions are explained in the following sections Switching on automatic pre
27. during playback in wired connection There are connection prob lems in inter ctive applica tions Note Signal is lost based on structural conditions Internet connection speed low DMS for example PC is connected to the wireless network and away from the modem Network Cable or wireless USB net work device may be disconnected Modem does not have Internet con nection or has problems Internet connection speed low This may occur due to temporary problems in servers of these applica tions Place the modem so that the signal to the television is not interrupted Low Internet speed is a problem that is related with the speed of your sub scription or a failure in the Internet in frastructure Contact with your service provided ISP Bring your DMS closer to the modem Check network cable or wireless USB network device Make sure that your modem has In ternet connection Low Internet speed is a problem that is related with the speed of your sub scription or a failure in the Internet in frastructure Contact with your service provided ISP Try connecting to the applications again m This is a Class A product During operation the device can cause radio interference In this case the user may have to remedy this Please contact your specialist dealer ENGLISH 93
28. for example channels unsuitable for children using a personal PIN code 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with W or A and press OK to confirm 3 Select the line Program Table with w or A and press OK to confirm The PROGRAM TABLE menu is dis played 4 In the PROGRAM TABLE menu switch over to the list view with eee yellow 5 Select the channel to be locked with vw or AK 6 Select the column Lock with or gt and press OK to lock the channel 7 Enter the PIN code 1234 with 1 O The channel is marked using Note m To remove the lock select the channel again with W or A press OK to confirm and then enter the PIN code 1 2 3 4 using 1 Ox 8 Press MENU to end the setting 68 ENGLISH Watching a blocked television channel You can watch a TV channel blocked with PIN code by selecting the TV channel and entering the PIN code 1 Select the blocked channel with 1 0 or P P 2 Open the menu with MENU 3 Select the menu item SETTINGS with w or A and press OK to confirm 4 Select the line Open Channel Lock with W or A and press OK to confirm 5 Enter PIN code 1234 with 1 O buttons on the displayed password screen Blocked channel can be viewed Note m Channel will be blocked again when you chan
29. format the picture is stretched horizontally if the 16 9 format or 14 9 format is selected The picture geometry is stretched horizontally With actual 16 9 input sources from a set top box on the SCART socket the picture fills the screen completely and with the correct geometry 4 3 format The picture is shown in 4 3 format LetterBox format The letterbox format is especially suitable for programmes in 16 9 format The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pic tures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The pic ture geometry remains unchanged Subtitle format If you cannot see the subtitles at the bottom of the screen select Subtitle Panoramax format This setting is suitable for films in an especially wide format During programmes in 4 3 format the picture is stretched horizontally if the Panoramax function is selected The picture geometry is stretched horizontally Overscan off format In this mode HD pictures are not cropped by the HDMI sockets or component sockets and are displayed in their original size This only applies in HDMI mode and for resolutions of 720p or above Note m Picture format selection is not supported in 3D mode ENGLISH 27 3D FUNCTION Important information about the Preparing the 3D function 3D function Your G
30. matically Depending on the features of the external de vice the external device e g AV receiver can be switched on alone the television stays in standby Automatic selection of the HDMI preset on the television If your television is switched on and you then switch on the external device e g DVD player the appropriate HDMI preset on the television will be selected Selecting the menu language The television menu language is automatically selected on the external device e g DVD player The external device must support this function Switching off the external device automatically If you switch your television to standby the ex ternal device if it is switched on will also be switched to standby DIGI LINK is always active on your television set 70 ENGLISH Searching for and activating external devices You can connect up to 11 devices with DIGI LINK functions to your television 1 Open the Tools menu with TOOLS 2 Select the menu item CEC with w or A and press OK to confirm The HDMI CEC Device List appears 2 Start the device search with e red The devices found are displayed in the menu 3 Select the device for operation with v A or gt and press OK to mark it If the selected device is connected to a different input to the current one a switch to the respective input will occur auto matically 4 Press MENU to end the
31. need to put on the Grundig 3D glasses m Smart Inter ctive TV feature provides your TV with the Internet services and pages when it is connected to the Internet You can visit popu lar video and photo sharing sites as well as social networks m DLNA feature allows you to use a wired or wireless local network to access your content that were recorded with DLNA compatible de vices we use at our daily lives such as a PC mobile phone or NAS Network Attached Storage which are operated as DMS Digital Medial Server Thanks to DMR feature when DLNA application has been started you can automatically start and stop media playing on devices with DMC feature m Devices that contain and serve video music or image files are called Server This television receives video music and image files from the server through home network allowing you to access and play such media even when your television is located in a different room then the server A DLNA compatible device such as a PC mobile phone NAS or a NAS like Net work attached storage device which operates as a DMS Digital Media Server is required in order to use home network GENERAL INFORMATION Receiving digital channels m You require a satellite antenna to receive digital satellite channels DVB S m You require a digital roof antenna or indoor antenna passive or active indoor antenna with its own power supply to receive digital television channels DVB T If you
32. of with regular household rubbish For certain rechargeable batteries batteries this sym bol may be supplemented by a chemical symbol Symbols for mercury Hg or lead Pb are provided if the rechargeable batter ies batteries contain more than 0 0005 mercury or more than 0 004 lead Rechargeable batteries batteries including those which do not contain heavy metal may not be disposed of with household waste Always dispose of used batteries in accordance with local environmental regulations Make enquiries about the appli cable disposal regulations where you live 1 Open the battery compartment by removing the lid 2 Insert the batteries 2 x 1 5 V micro for example RO3 or AAA Observe the po larity marked in the bottom of the battery compartment 3 Close the battery compartment Note m If the television no longer reacts properly to remote control commands the batteries may be flat Always remove used batteries mThe manufacturer accepts no liability for damage caused by leaking batteries ENGLISH _9 OVERVIEW Connections on the television set nin oJ Ko H AV1 S VHS SCART socket CVBS signal AUDIO OUTLR Sockets for audio output RGB signal Video and sound socket for Audio S Video camcorder COMPONENT PEIN Y Pb Pr Sockets for video input YUV signal SATELLITE LR Sockets for audio input YUV signal ANTIN Optic Out Socket for audio output aini for PCM Dolby HDMI2 ARC
33. optional Enter the data after entry use V A and gt to select the button 4 and confirm with OK Confirm the entry with eeee blue Read the Conditions of Use and accept with OK The GRUNDIG applLICATION store SMART INTER ACTIVE TV 2 0 FUNCTION Log on to GRUNDIG AppLICATION store If you reset the television to factory settings and have not set the check mark in the field Save installed applications during reset all installed applications will be deleted When the GRUNDIG appLICATION store menu is selected the Log on menu is dis played Please enter your e mail address and password 1 Call the GRUNDIG appLICATION store menu with The Log on menu is displayed Start Login with eeee blue menu is displayed and the standard applications are loaded Enter the e mail address Enter the data and close the keyboard with a Select the next line with w 4 Enter the password Enter the data and close the keyboard with 4m lt Note m If you have forgotten the password press eee yellow A new password is sent to your e mail address within a short time Enter this password 5 Confirm the entry with eeee blue Read the Conditions of Use and accept with OK An information is displayed You can choose if you want restore your applications or if you want download the default applications
34. or gt to select the preferred setting m If fine tuning is necessary select the line Fine Tuning with W or A and use or gt to make the setting 7 Press MENU to end the setting 7 Press eeee blue to save the setting 86 ENGLISH SPECIAL SETTINGS Note mlf you wish to remedy other television channels repeat steps 4 to 7 8 Press MENU to end the setting Changing stored analogue channels If channels were stored with the automatic chan nel search while tuning the television channels you can delete them You can also store chan nels in a different preset change or enter the name of a channel as well as skip channels Selecting a channel list 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Program Table with w or A and press OK to confirm The PROGRAME TABLE menu appears Note m Additional operations are explained in the following sections Deleting channels 1 In the PROGRAME TABLE menu select the television channel to be deleted with v A or gt and press e red to con firm 2 Delete the selected channel by pressing eee yellow Note E eeee blue allows all television channels to be deleted 3 Press ee green to confirm the deletion process Entering chan
35. press OK to confirm 2 Select the line Mode with W or A and use or gt to set the preferred mode 3 Select the line Set Hour with W or A and enter the time with 1 0 4 Save the data with e green Note m You can abort the entry by pressing e red 5 Press MENU lt to end the setting Automatic switch off Auto Sleep If this function is activated the television switches automatically to standby after 5 minutes if no video signal is broadcast or in accordance with the according to European regulations the tel evision switches automatically to standby after 4 hours provided that none of the buttons on the remote control or on the television is operated during this period 1 Select the line Auto Sleep with w or WANK 2 Enter the switch off time with or gt Note m To switch off the function use or gt to select the setting Off 3 Press MENU to end the setting Parental control settings Authorising programmes There are films which may be wholly or partially unsuitable for children These programmes contain information which marks the content or scenes with access levels of 4 to 18 You can select one of the access levels thereby authorising playback 1 Select the line Parental Guidance with W or A and press OK to confirm 2 Enter the PIN code 1234 with 1 O 3 Select the acces
36. setting OPERATION USING EXTERNAL DEVICES__ Device operation You can decide whether external devices should react to your television s remote control 1 Press raf x use W A or gt to select the preset HDMI1 to HDMI4 and press OK to confirm Open the menu with MENU Select the menu item SOURCE SETUP with W or A and press OK to confirm The SOURCE SETUP menu appears HDMI S010 Se 10 H Source HDMI 1 DIGILINK Device Selection GRUNDIG DVD RC Passthrough Remote Control Device Standby 4 Select the line Remote Control with w Or A Select the type of operation RC Passthrough Deck or Tuner with or gt Notes m RC Passthrough can be used for all devices Deck and Tuner can be selected in ac cordance with the external device which has been connected m Try out which type of remote control opera tion the external device reacts to the best m Read about the scope of functions of the DIGILINK compatible device in the respec tive operating manual 6 Press MENU to end the setting Switching the device to standby This option switches the external device to standby 1 Press gt use W A or gt to select the preset HDMI1 to HDMI4 and press OK to confirm Open the menu with MENU Select the menu item SOURCE SETUP
37. size m When playing picture data press twice to enter the DivxX Settings menu m When playing picture data the file browser switches off Press llll to display the file browser again 6 Press Illl to pause playback 7 Press gt to resume normal playback 8 Press llll to end playback The file browser appears USB OPERATION Notes m Use A to select Up Folder when you would like to return to the last folder Use Root and then press OK to return to the main folder m t is possible that files which are actually supported do not function correctly in USB mode This is because certain files are not recorded with standardised compression processes although they feature the right file ending m If a video file features several audio tracks audio streams you can switch these over during playback in full screen mode with m When playing music files you can use other options in the USB mode at the same time This way you can for example enhance a slideshow with music m For films only subtitles in the SRT ASS SSA SMI format are sup ported The names of the subtitle and film files must be identical Otherwise no subtitles will be shown Subtitle function is only supported in movies that you will watch in 3D mode Additional playback functions Depending on the file format the following additional functions are available Selecting chapters on D
38. socket on the external device using a SCART cable video and audio signal Activating a decoder If a decoder is connected to the AV1 S VHS socket this must be activated to provide an unencrypted video audio signal 1 Open the menu with MENU 2 Select the menu item SETTINGS with w or A and press OK to confirm The SETTINGS menu appears 3 Select the line Decoder with W or A 4 Activate the function with or gt On 5 Press MENU lt to end the setting With S Video signal m Suitable devices DVD player recorder video recorder camera recorder notebook PC m Video signal Y C m Audio signal stereo analogue m S VHS preset 1 Connect the AV1 S VHS socket on the television and the corresponding socket on the external device using an EURO AV ca ble video and audio signal ENGLISH 73 OPERATION USING EXTERNAL DEVICES__ With an analogue TV signal m Suitable devices Digital satellite receiver DVD player recorder set top box camera recorder m Video signal CVBS m Audio signal stereo analogue m AV2 lt preset 1 Connect the Video socket on the television to the corresponding socket of the external device with an RCA cable video signal 2 Connect the L R sockets on the television to the corresponding sockets of the external device with RCA cables audio signal Note m There must not be a video
39. start recording Information on the recording is displayed the recording symbol the channel name the programme the recording time and the available memory space After a short time this information disap pears 5 Press lx to stop recording Confirm the display with e green or press e red to continue the recording Presetting programmes to be recorded using the electronic TV guide You can use data from the electronic TV guide for recording 25 programmes can be preset for the timer recording or as a reminder 1 Press GUIDE to display channel informa tion The electronic TV guide appears 2 Select the preferred channel with w or A 3 Switch to the information about the current programme with gt 4 Select the programme of your choice with W or A 5 Confirm the programme with E lt The symbol appears after the name of the programme and the data has been added to the timer 54 ENGLISH Note E If the data for the recording is to be changed use eee yellow and eeee blue to switch to the SCHEDULED EVENTS press ee green change the data and save it with ee green 6 Press MENU to exit the menu Notes m Before the timer recording begins a warn ing message appears with a 20 second countdown You can switch over to the pro grammed television channel m If the timer recording starts during playback
40. the LNB type 22 kHz audio is selected For a univer sal LNB this option is set to Auto and cannot be changed DISEqC mode and LNB selection depending on the type of antenna used use or gt select the option Off DISEqC 1 0 or DISEgC 1 1 Off for a satellite system with only one antenna DiSEqC 1 0 allows up to four satel lites to be received simultaneously Under LNB selection use or gt to select the option 1 4 2 4 3 4 or 4 4x DISEqC 1 1 allows up to 16 satel lites to be received simultaneously Under LNB selections use or gt to select the option 1 16 to 16 16 5 Press MENU to end the setting Settings for motorised antennas DiSEqC 1 2 Your television set supports motorised satellite systems in compliance with DiSEqC 1 2 This function allows the satellite antenna to be oper ated via the television set 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with W or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Antenna Settings with w or A and press OK to confirm 4 Select the line DiSEqC Modex with w or A Select the option DiSEqC1 2 with or gt The line DiSEqC 1 2 SETTINGS lt is active Notes Additional operations are explained in the following sections m The following d
41. time you will need to wait a moment until the CA module is detected 78 ENGLISH Access control for CI module and smart card 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line CA Module with w or A and press OK to confirm Notes m This menu provides operating instructions and after you enter your PIN code ac cess to the PAY TV provider s channels m The remaining settings are described in the operating manuals for your Cl module and smart card m The CA modul is not supported in certain countries and regions please consult your authorised dealer 4 Press MENU to end the setting SPECIAL SETTINGS Searching for digital television channels from a satellite automatically Satellite data changes frequently new channels are constantly being added You should therefore perform an automatic search from time to time This searches all transponders for new channels 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Ke SOURCE SETUP Source Satellite Digital Manual Tuning Antenna Settings Program Table Signal Information Automatic Service Update ii CA Module Not Inserted HBB TV Settings Select the line Source with w
42. with V or A and press OK to confirm The SOURCE SETUP menu appears Select Device Standby with v or A and press OK to confirm The external device switches itself off ENGLISH 71 OPERATION USING EXTERNAL DEVICES__ High definition HD ready Connect the corre HD sponding input sources e g HDTV receiver or HD DVD player to the HDMI sockets for 1080p digital HDTV sources This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Bandwidth Digital Content Protec tion without encountering problems Connection options m Which television socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available m Please note With many external devices the resolution of the video signal must be adjusted to the input sockets of the television see the operating manual of the external device You can find out which values you need to set by referring to the guidelines in the sections about the various connection options Do not connect any other equipment while the device is switched on Also switch off the other equipment before connecting it Do not plug in the power cord of the device until you have connected the external equip ment and the antenna 72 ENGLISH OPERATION USING EXTERNAL DEVICES__ Connecting external devices With digital audio v
43. you can display the channels which belong to one network Switch to the next page in the programe table with P and to the previous page with P With eee yellow you can open the LIST MANAGEMENT within the programe table In this List Management you can create your own favourites lists With eeee blue you can sort the channels ac cording different criteria INSTALLATION PROGRAM TABLE 1 Das Erste HD Service 2 ZDF HD DTV 6 EinsPlus 7 arte DTV DTV D 11 HD1 DTV ca 16 TV Sport DTV 18 ENGLISH 3 arte HD DTV 8 Phoenix TV 13 Film DTV 18 SKY DTV Selecting channel lists 1 Open the menu with MENU 2 Select the SOURCE SETUP menu with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Programe Table with w or A and press OK to confirm The menu PROGRAM TABLE appears Important m Programe table and favourites lists are saved separately according to the different input sources satellite cable air m When opening the program table the respec tive channel list for the current input signal appears Notes m If in the program table 4 appears added to the name of the channel you need a Cl module and a Smart Card for watching these channels m As the received data channels are not dis played in the program table number chan nels displayed in the program table may be less than
44. 6000 Network ALL DTV ASTRA 19 2 4 N24 5 Einsfestival DTV DTV 9 Test R 10 ANIXE HD DTV DTV 14 Promo 15 Sport1 DTV DTV 19 TV6 20 TV5 DTV DTV SETTINGS Deleting channels 1 In the PROGRAM TABLE menu select the Edit mode by pressing e red 2 Select the television channel to be deleted with W A or gt and press eee yellow to delete Note m You can delete all channels with eeee blue 3 Confirm the deletion process with ee green or cancel the deletion process with e red 4 Quit the program table with MENU Change the order of the channels in the program table only satellite channels 1 In the PROGRAM TABLE menu select the Edit mode by pressing e red 2 Select the channel which should be moved with W A or gt and mark it with e red 3 Move the channel to its new position with V A or gt and press OK to confirm Note m Repeat steps 2 and 3 if you would like to change other channels 4 Quit the program table with MENU Sorting channels in the program table only satellite channels You can sort the order of the channels in the pro gram table according different criteria in order of Satellite alphabetical or in order of encryp tied free channels 1 In the PROGRAM TABLE menu select the Sort mode by pressing eeee blue 2 Select the sort c
45. ATION To use the functions GRUNDIG AppLICA TION store and Operation with Digital Media Server you must connect the television to your home network with internet access and log on When you have logged your television onto the home network it can also be operated remotely from an Apple iPhone or Android smartphone The options available are dependent on the functions offered by the television To enable this you must download the free application GRUNDIG TV Remote from the Apple App Store or from Google Play Android Market and install it on your Apple iPhone Smartphone Network Connection You can establish a wired or wireless connection between your television and the local network If you want to use a wired network connection please start with the instructions on this page If you use a wireless network connection please follow the instructions in the Wireless network connection section on page 34 Wired network Wired network connection 1 Connect the output of external model to LAN socket with Cat 5 cable Note m Connection cables are not supplied ENGLISH 31 NETWORK INSTALLATION Wired network setting There are two ways of making the wired network settings A Automatic connection all data regarding connection settings IP Address Netmask Gateway and DNS are obtained from modem automati cally B Manual connection all data regarding connection s
46. GUIDE 3 veee yellow and eeee blue in succes sion The SCHEDULED EVENTS menu ap pears Select the title of the programme to be deleted with w or A and delete the timer posi tion with eee yellow Press MENU to close the menu ENGLISH 55 USB RECORDING Playback The recorded programmes whether started manually or using the timer function are stored on the external data medium You can open the archive on the external data medium by pressing REC LIST Selecting a programme from the archive l Open the Recorded Event menu with REC LIST The menu appears 2 Select the programme of your choice with W or A and start playback with gt 3 Press flll to end playback The television switches over to the current television channel Forward reverse picture search 1 During playback select the fast forward speed 2x 4x 8x 16x or 32x with PP or during playback select the rewind speed 2x 4x 8x 16x or 32x with 4d the pic ture freezes when rewinding Repeating a scene A B You can mark the starting and ending point of a scene The scene is then repeated continuously 1 Mark the starting point A by pressing gt at the required scene during playback This scene is marked as the starting point A 2 Mark the end point B by pressing gt once again at the required scene during playback This scene
47. In this menu you can for example create your user profile change your password and edit other settings 1 In the Skype mains menu select the menu item Options with w or A and press OK to confirm The Options will be displayed 2 Select the option e g User Profile Change Password etc with W or A and press gt to confirm 3 Start data input with OK edit the settings with Ww or A and confirm with OK or cancel the setting with 4 Switch back to the menu bar with 5 Switch back to the Skype main menu with Updating Skype application Skype application updates are performed with the TV software updates For TV software up dates see page 69 The application BABY WATCH The BABYWATCH application enables you to keep an eye on your children You need internet access and a Grundig Baby watch G BCAM O1 with integrated microphones please ask your specialist retailer For more information on the camera functions see the user guide for the GRUNDIG Babywatch G BCAM O1 Select the application BABY WATCH 1 Select the Quick Apps menu with 2 Press e red button to enter the GRUNDIG appLICATION store menu 3 Select the All Applications row with w or A and switch to the list of applications with gt 4 Select the BABYWATCH application with V A and gt confirm with OK
48. LCD TV 47 VLE 9474 BL AUS GUTEM GRUND GRUNDIG CONTENTS 21 22 24 24 25 25 26 26 27 28 28 28 29 SETUP AND SAFETY GENERAL INFORMATION Special features of your television set Receiving digital channels Grundig SCR system Important notes on environmental protection Notes on still images CONNECTION AND PREPARATION Connecting the antenna and power cord Inserting batteries into the remote control OVERVIEW Connections on the television set Controls on the television set The remote control Main functions The GRUNDIG Voice Remote The remote control All functions SETTINGS Initial set up and tuning television channels Selecting language country and operating mode Tuning the television channels from satellite DVB S Tuning terrestrial television channels DVB T Tuning television channels from the cable provider DVB C Changing the program table for the digital channels Picture settings Sound settings TELEVISION OPERATION Basic functions Zoom function Eco mode Zapping function Electronic TV guide Changing the picture format 3D FUNCTION Important information about the 3D function Preparing the 3D function 3D Settings 2 ENGLISH NETWORK INSTALLATION Network Connection Wired network Wireless network connection SMART INTER ACTIVE TV 2 0 FUNCTION Smart Inter active TV 2 0 Applikationen GRUNDIG AppLICATION store Plugged into Skype Connecting and se
49. SETTINGS with W or A and confirm with OK The menu appears 8 Select the line Audio Output Setup with W or A and confirm with OK The menu appears 9 Select the line ARC with W or A 10 Select the setting On with or gt Notes m The internal speakers of the television are switching off automaticaly m The volume of the AV receiver you can adjust with the remote control of the television m For switching off the HDMI ARC function select Off with or D m The ARC function will be deactivated while switching off the television and the internal speakers are active again 11 Press MENU to end the setting ENGLISH 75 OPERATION USING EXTERNAL DEVICES__ Playing the audio signal via the HiFi system 1 Connect the AUDIO OUT L Rx sockets on the television to the corresponding socket of the AV receiver with an RCA cable digital audio signal Note m If this function is not activated the audio sig nal is transmitted to the HiFi system AV re ceiver connected to AUDIO OUT L Rx 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with w or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select the line Audio Output Setup with V or A and press OK to confirm The menu appears 4 Select the line Audio Out with W or A and press or gt to acti
50. The lines Time Zone and Daylight Sav ing are active 2 Select the line Time Zone with w and press OK to confirm The Select Time Zone menu appears 3 Select the appropriate time zone with gt V or A and press OK to con firm 4 Select the line Daylight Saving with w and use or gt to set the option Autox Off or On 5 Press MENU lt to finish the setting Note m f the option Auto is selected in the line Time Adjustment the television set auto matically adapts the time to the time signal from the respective broadcaster However different channels may also use time bases which are different to those of your country e g foreign broadcasters In these cases reminders and planned recordings may be annulled due to the time difference 66 ENGLISH Timer functions Entering the switch off time sleep timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Sleep Timer with w or DAK 2 Enter the switch off time with or gt Note m To switch off the function use or gt to set the switch off time to Off 3 Press MENU to end the set up Switch on timer In the Auto On menu you can enter a switch on time for the television After the preset time has el
51. Use or gt to select whether you want to search for television channels only TV radio stations only Radio or both Radio TV 5 Start the scan with e red The Results menu appears and the scan for TV channels begins Note m You can abort the search by pressing MENU 6 Press MENU lt to end the setting 80 ENGLISH LNB settings Notes m The following description about the LNB settings premise a substantial expertise about the satellite systems Ask your specialist dealer m Your TV supports SCR system Satellite Channel Router If you are using SCR satellite system follow the steps described in LNB Type section Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Antenna Settings with w or A and press OK to confirm The ANTENNA SETTINGS menu ap pears Select the line required for the parameters with W or A Satellite Press OK select a satellite with gt W or A and press OK to confirm Transponder Press OK select a tran sponder with gt W or A and press OK to confirm Use e red to add a transponder use e green to delete it or use eee yellow to change transponder data LNB Power Set the LNB power supply depend
52. a DLNA application on a wireless local network and in a Smart Inter ctive TV 2 0 application on a network with internet connection depends on the number of users on the network as it is the case in every wireless network E Itis recommended to switch off the equipment that are not in use in home network in order to avoid unnecessary network traffic m Placing the modem or wireless network sharer on an elevated location will increase the wireless connection reception strength m Wireless connection reception strength may vary depending on the type of the modem and the distance between the modem and television m Modem must be transmitting its SSID in order to establish a wireless connection Television can not connect to a network without SSID Wireless network settings There are two ways of making the wireless net work settings A Automatic connection all data regarding connection settings IP Address Netmask Gateway and DNS are obtained from modem automati cally B Manual connection all data regarding connection settings IP Address Netmask Gateway and DNS must be configured manually NETWORK INSTALLATION Automatic connection Most of the home networks are Dynamic If you have a dynamic network you must use a DSL modem that supports DHCP Modems and IP sharers that support DHCP obtain the IP Ad dress Netmask Gateway and DNS values required for internet acc
53. a feature film signal minor problems such as picture freeze defective subtitles or fine lines in the picture could Colour Temperature Medium occur Colour 65 m The function Dynamic Contrast adapts the contrast dynamically and optimally for the respective picture content Advanced Tuning m With Dynamic Backlight the device opti mally adapts the background lighting to the 3 Select the line Picture Mode Bright picture content ness Contrast Sharpness Colour or Colour Temperature with W or A m The Backlight can only be set manually Select the value with or gt and press when the function Dynamic Backlight is OK to confirm deactivated Notes m MEMC feature only appears in the menus of m When changing the values with or gt the products with 400 Hz PPR feature the screen will be split You can see the 5 Press MENU to end the setting current picture value on the left side the new setting on the right side This feature is not supported in 3D mode m In the PICTURE SETTINGS menu you can also find other additional settings 4 Select the line DNR Mpeg NR Vibrant Colour Perfect Clear Film Mode Gamma Dynamic Contrast Dynamic Backlight Backlight or MEMC with W OF IAk Select the value with or gt and press OK to confirm ENGLISH 21 SETTINGS Sound setting
54. adcaster If the message URI protected PVR function is blocked appears on the screen then re cording or timeshift is restricted one recording possible or disabled recording not possible by the broadcaster URI User right information Copyright in formation E f you record and save a programme on the archive of an external data medium playback can be restricted The broadcaster can allow you to view this programme one or more times but it may onlyv be available for a certain period of time E Programmes not suitable for minors will require the input of a PIN number immediately before recording starts If this authorisation is not given the recording may not start E Copying a programme from a digital television channel onto a video or DVD recorder using the AV 1 socket analogue picture sound signal can also be restricted by the broadcaster Prerequisite is that your device supports the copying function USB RECORDING Connecting external data media Notes m Before connecting the external data medium it is recommended to switch the television to stand by mode m Before removing the external data medium the television must be switched to standby so that no data loss occurs m Your television features two USB sockets USB1 and USB2 HDD USB2 HDD isusedtoconnectdatamedia which require an additional power supply for example external hard disks 1 Connect the USB2
55. antenna system select the option Air or Cable with v A or gt as the input source and press OK to confirm Note Additional operations are explained in the following sections Setting all analogue television channels Analogue channels are displayed in the channel list after the digital channels Note m Plug the rooftop antenna cable for analogue television channels into the ANT IN socket on the television 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Air or Cable with gt V or A and press OK to con firm ENGLISH 85 SPECIAL SETTINGS 4 Select the line Automatic Channel Searche Tuning the television channels by with W or A and press OK to confirm entering the channel numbers 1 Open the menu with MENU 7A SOURECE SETUP CN 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm ae z The SOURCE SETUP menu appears Source 3 Select the line Analogue Manual Tuning with W or A and press OK to confirm Digital Manual Tuning The menu appears Automativ Channel Search Analogue Manual Tuning N INSTALLATION 2 ANALOGUE MANUAL TUNING Program Table Sig
56. apsed the television switches on from standby at the preselected volume and the preselected television channel 1 Select the line Auto On with Ww or A and press OK to confirm 2 Select the line Mode with w or A and use or gt to select when the television should switch on 3 Select the line Input Source with W or A and use or gt to select the input source 4 Select the line Service Type with W or A and use or gt lt to select the preferred op tion ATV DTV Radio or DATA 5 Select the line Channel with w or A and use or gt to select the preferred channel Note m The line Channel is only active when the in put signal currently in use has been set If no entry has been made then the first channel of the selected input source will be used CONVENIENCE FUNCTIONS 6 Select the line Volume with W or A and use or gt to set the volume 7 Select the line Set Hour with w or A and enter the time with 1 0 8 Save the data with ee green Note m You can abort the entry by pressing e red 9 Press MENU lt to end the setting Switch off timer In the Auto Off menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Auto Off with w or A and
57. automatically select the line Auto matic Online Update with w or A and use or gt to select the option On The software will be updated automati cally as far as possible 2 Press MENU to end the setting Restoring the television to the default settings This function allows you to delete the channel lists and all custom settings 1 In the SETTINGS menu select the line Restore Factory Defaults with w or A and press OK to confirm 2 Press ee green to confirm the warning message The Source Setup menu appears 3 Continue the settings with the chapter Initial setup and tuning television channels on page 14 ENGLISH 69 OPERATION USING EXTERNAL DEVICES__ DIGI LINK Your television is equipped with the DIGI LINK function Cis This function uses the CEC Consumer Electronics Control protocol CEC allows external devices which are connect ed to the HDMI sockets by an HDMI cable e g DVD player to be operated with a remote control Prerequisite is that the devices connected support CEC Read the operating manual for the external device to find out how to activate the correspond ing function The DIGI LINK functions on your television Switching on the television automatically from standby If the external device e g Blu ray player is switched on the television also switches on and the appropriate HDMI preset is selected auto
58. btitle Language menu ap pears 2 Select the subtitle language with w A or gt then use e red to set it as the primary subtitle language or use ee green to set it as the secondary subti tle language The primary and secondary language is displayed at the top right in the menu a To go back one menu level press 4 Select the line Subtitle Mode with w or A and then set the preferred option Off Hard of Hearing or Basic with or gt 5 Press MENU to end the setting ENGLISH 65 CONVENIENCE FUNCTIONS Setting the date and time Automatic setting Your television set detects the difference in time to Greenwich Mean Time GMT automatically as long as the channel selected transmits a time signal 1 Select the line Date amp Time with w or A and press OK to confirm 2 Select the line Auto with w or A and press OK to confirm Date and Time will be updated automatically or 3 Select the input box with w or A enter the data for Date and Time with 1 0 and press OK to confirm Manual setting You can also set the difference in time manually for example when the correct time is not de tected automatically or does not correspond to local time for other reasons 1 Select the line Time Adjustment with w then select the option Manual with or gt
59. cations with The registration screen for GRUNDIG AppLICATION store will be displayed Start registration with OK Enter the last and first name Select the text field with w A and gt and confirm with OK Enter the data and then use V A and gt to select button and confirm with OK Switch to the next input line in the same tab with w and display the keyboard with OK Switch to the next tab with eeee blue and display the keyboard with OK Note m You can switch to the previous tab with e red 4 Enter the e mail address Enter the data after entry use W A and gt to select the button 4 and confirm with OK Switch to the next tab with eeee blue and display the keyboard with OK Enter the password and confirm the password Enter the data after entry use W A and gt to select the button 4 and confirm with OK Switch to the next input line in the same tab with V and display the keyboard with OK Switch to the next tab with eeee blue and display the keyboard with OK Enter the location Enter the data after entry use W A and gt to select the button a and confirm with OK The message You are is displayed registration was successful Enter the telephone number
60. ciency class A Screen size 119 cm 47 inch Screen dm 61 dm Operating voltage 220 240 V 50 60 Hz Power consumption On mode 65 W Standby lt 0 50 W Off Mode 0 W Maximum power consumption On mode 140 W Annual power consumption 95 kWh Maximum resolution WUXGA 1920 x 1080 Rohs Limits Pb Lead Hg Mercury Pb meets ROHS directive O mg Peak luminance ratio 65 Other information Audio output 2 x 20 W music power output 2 x 10 W Sine wave power 10 W sine wave power Subwoofer Subwoofer is optional it is not available in all products Default satellite 20 LNB power supply 13 18 V 14 19 V optional maximum 500 mA LNB switching signal 0 22 kHz 650mV 250mVpp DiSEqC 1 0 operation 1 1 operation 1 2 operation 90 ENGLISH Digital reception ranges Satellite Ku band 10 700 MHz 12 750 MHz Modulation DVBS QPSK DVBS2 QPSK 8 PSK IF band 950 MHz 2 150 MHz Signal level 25dBm to 65 dBm Cable Overall band 110 MHz 862 MHz Modulation 16QAM 32QAM 64QAM 128QAM and 256QAM Symbol rate 4 0 Msym s to 7 4 Msym s Terrestrial DVB T VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size 2k 8k Modulation 16QAM 64QAM QPSK Guard Interval 1 4 1 8 1 16 1 32 Terrestrial DVB T2 VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size Modulation 1k 2k 4k 8k 16k 32k 16QAM 64QAM 256QAM QPSK Guard Interval 1 4 19 256 1 8 19 128 1 16 1 32 1
61. displayed after a short while Press 4 to end setting SMART INTER ACTIVE TV 2 0 FUNCTION Creating a Skype contact list 1 2 Open the menu Quick Apps with Select the plugged into Skype application with W A and gt and press OK to confirm To create a new contact press eee yellow Add Account Type menu will be displayed Select the option Skype Contact with w or A and press OK to confirm Add a Skype Contact menu will be displayed Press OK and enter each character of the new contact Select the required characters numbers with VW A and gt and confirm with OK To save use V A and gt to select the Enter button and confirm with OK Select the option Search with w or A and press OK to confirm Search results will be displayed after a short while Confirm the search results with OK if there are more than one search results select the contact you want to add with w or A and press OK to confirm Details of the contact will be displayed on the screen Press OK to add the contact to the contact list A request to the contact is shown Select the push button Send with or gt and press OK to confirm Confirm the request again with OK Added contact shall be displayed in Skype contact li
62. door use limited to 10 mW e i r p within the band 2454 2483 5 MHz Military Radioloca tion use Refarming of the 2 4 GHz has been ongoing in recent years to allow current relaxed regulation Full implementation planned 2012 For customers in Italy For private use a general authorisation is re quired if WAS RLAN s are used outside own premises For public use a general authorisation is required For customers in Norway This subsection does not apply for the geograph ical area within a radius of 20 km from the cen tre of Ny Alesund For customers in Russian 1 SRD with FHSS modulation m Maximum 2 5 mW e i r p Maximum 100 mW e i r p Permitted for use SRD for outdoor applications without restric tion on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems Permitted to use SRD for other purposes for outdoor applications only when the installa tion height is not exceeding 10 m above the ground surface Maximum 100 mW e i r p Indoor applica tions 2 SRD with DSSS and other than FHSS wideband modulation m Maximum mean e i r p density is 2 mW MHz Maximum 100 mW e i r p Maximum mean e i r p density is 20 mW MHz Maximum 100 mW e i r p Permitted to use SRD for outdoor applications only for pur poses of gathering telemetry information for automated monitoring and resources account ing systems or security systems Ma
63. dvanced Installation with W or A and press OK to confirm The menu appears INSTALLATION Q ANTENNA SETTINGS Satellite ASTRA 19 2 E 11362 MHz H LNB Type Universal LNB Power Off DISEqC Mode Off LNB Selection Off Transponder Quality 0 2 TE S Signal strength INA Back 3 Select the line Satellite with W or A and press OK to confirm The SELECT SATELLITE menu appears Select the satellites with W A or gt and press OK to confirm Note m The setting in the line Transponder is not required for this automatic scan 4 Select the line LNB Power with w or DAK Depending on the type of LNB set the LNB power supply to 13 18 V or 14 19 V with or gt 5 Select the line LNB Type with w or A Select the type of LNB installed with or gt ENGLISH 15 SETTINGS 6 Select the line DISEqC Mode with w or A Select DiSEqC 1 0 or DiSEqC 1 1 in accordance with the existing antenna system with or gt DiSEqC 1 0 allows up to four satellites to be received simultaneously DiSEqC 1 1 allows up to 16 satellites to be received simultaneously 7 Select the line LNB Selection with w or DA lt Select the setting for the respective satellites with or gt 8 Once the settings for the satellite have been made switch to t
64. e User audio setting see the Soundeffects chapter on page 23 Note m User option is active when Sound mode setting is selected as Normal or Spatial Audio language Various languages are available on digital tele vision channels This depends on the programme being broadcast 1 Open the selection menu with 2 2 Select the language by pressing W or A and press OK to confirm Subtitles Various subtitles are available on digital televi sion channels This depends on the programme being broadcast 1 Open the selection menu with Sk 2 Select the subtitles with w or A and press OK to confirm Note m Subtitles in terrestrial digital broadcasts are not supported in 3D mode Zoom function This function allows you to enlarge the picture as required 1 Open the Tools menu with TOOLS 2 Select the menu item Zoom with w or DAK 3 Press OK repeatedly to enlarge the display in three steps Note Zoom feature is not supported in 3D mode Eco mode This function allows you to reduce the power consumption 1 Open the Tools menu with TOOLS 2 Select the menu item Eco TV with W or AK 3 Switch on the Eco mode with or gt Switch the Eco mode off again with or gt Entering the switch off time sleep timer In the Sleep Timer menu you can enter a time for the television to switch off A
65. e applications it may be required to connect to the web page of the related application Subject web pages may contain links not related to Login process When connecting those links TV may access open web and view contents that are not supported by your TV As you are on open web your TV cannot control those unsupported contents or cannot be held responsible for them Open the SMART INTER CTIVE TV menu 1 Open the menu with MENU 2 Select menu item INTER CTIVE TV with V or A and press OK to confirm INTER CTIVE TV menu is displayed 3 Select the line Inter ctive Applications with V or A and press OK to confirm Inter ctive Applications menu will be displayed During initial login registration screen for GRUNDIG AppLICATION store will be displayed Notes m If you press when no menu is open you can access Quick Apps menu E If you attempt to start Inter ctive applications without wire or wireless adapter connected the related warning is displayed on the screen If your wire or wireless adaptor is connected but you cannot receive IP or internet is not connected the Inter ctive applications cannot be started In this case check Network connection settings See page 31 or 34 m You can find information on how to navigate in the menus and how to create an account on GRUNDIG AppLICATION store in the next chapters ENGLISH 37 SMART INTER ACTIVE TV 2
66. e menu appears Z source SETUP eae T AUTOMATIC CHANNEL SEARCH Connection Type i Air Country i UK 1 Scan Type DTV amp ATV 84 ENGLISH 6 Select the line Scan Typ with w or A and set the option DTV with or gt 7 Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Reults menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PROGRAM TABLE appears Note mYou can abort the search by pressing MENU 8 Press MENU to end the setting Automatic service update If this function is activated possible changes of network operators are updated automatically The unit must be located in stand by mode Open the menu with MENU 2 Select the menu item SOURCE SETUP with W or A and press OK to confirm 3 Select the line Automatic Service Update with W or A 4 Select the automatic update with or gt On 5 Press MENU to end setting SPECIAL SETTINGS Searching for digital terrestrial TV channels manually 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to conf
67. e scan with ee green The Search Results menu appears and the search for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note mYou can abort the scan by pressing MENU 5 Press MENU to end the setting Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 88 If the level is displayed in green you can record HD channels without any problems Tuning television channels from the cable provider DVB C 1 5 In the Source Setup menu in the Connec tion Type line select the option Cable with or gt d Select the line Scan Type with w or A Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Select the line Cabel Scan Type with w or A Select the preferred option Quick or Full with or gt The search function Quick sets up the channels according to the information pro vided by your cable provider in the trans mission signal If the option Full is selected the entire frequency range will be scanned The search can take a long ti
68. echt ARD Ratgeber Reise ARD Sondersendung Cm Co HbbTV Operation When you switch to a TV programme that sup ports HbbTV an information message is dis played if HbbTV is available 1 Switch on HbbTV with e red Information about the service is displayed on the screen In addition the coloured keys required for navigation are also dis played Note m The range of subject areas and the selection of the individual subject areas is dependent on the each programme provider m The number buttons 1 to O are used for additional functions 2 Select your required subject area with ee green weoee yellow Or eeee blue 64 ENGLISH Ausblenden 3 In your selected subject area choose the re quired option using V A or gt and confirm with OK 4 Switch on HbbTV with e red Note m If the navigation in HbbTV operation does not work you can finnish this function Se lect in the TOOLS menu the option Exit HBBTV and press OK to confirm Additional functions for video sequences 1 Start playback with gt Pause playback with I lt Continue playback with D gt Rewind with 44 or forward with gt gt uk QN Stop playback with llll CONVENIENCE FUNCTIONS Opening the SETTINGS menu 1 Open the menu with MENU 2 Select the menu item SETTINGS menu with V or A and press OK to confirm
69. eries together m Only replace the exhausted batteries with those having the same model value and prop erties m By ensuring proper disposal of these batteries you will have contributed in prevention of po tential hazards on the environment and human health that may arise from inappropriate dis posal of the batteries Caution m If you plan on using a wall bracket for your television make sure you read the assembly manual for the wall bracket or have a spe cialist assemble it m When purchasing the wall bracket make sure that all the fastening points on the televi sion are also on the wall bracket and that they are all used when mounting it ENGLISH _5 GENERAL INFORMATION Special features of your television set You can receive and watch digital TV chan nels using your television set via DVB S DVB T and DVB C including High Definition pro grammes HD However the reception of digi tal TV channels in HD is currently limited to a few countries in Europe Although this television set complies with the current DVB S DVB T and DVB C standards status August 2010 the compatibility with future DVB S satellite transmissions as well as terrestrial DVB T and DVB C cable pro grammes cannot be guaranteed Your television set can receive and process all analogue and non encrypted digi tal TV channels The television set is also equipped with digital and analogue receivers The electronic TV guide for di
70. escription about the DiSEqC 1 2 settings premise a substantial expertise about the satellite systems Ask your specialist dealer ENGLISH 81 SPECIAL SETTINGS DiSEqC 1 2 Settings You can adjust the alignment of the satellite an Searching for television chan nels from the cable provider tenna to each individual satellite These settings will be saved so that the antenna can later be easily guided to each saved alignment 1 Select the line DiSEqC 1 2 SETTINGS with V or A and press OK to confirm The DiSEqC 1 2 SETTINGS menu ap pears Select the preferred option with w or A Transponder Press OK select the transponder from which the signal is being received with gt W or A and press OK to confirm Moving Mode Use or gt to select the option Discrete or Continuous Discretex Moves the antenna in defined steps to the west and the east Continuous Moves the antenna to the west or east continuously Step Size Use or gt to select the number of steps with which the antenna should turn Step Size is only active when the Transport Mode was set to Discrete Move Motor Aligns the antenna with the selected satellite Use to align it to West use gt to align it to East Go To Stored Position Aligns the antenna to a saved satellite position Up to 50
71. ess automatically and thus you are not required to enter those val ues manually 1 Open the menu with MENU 2 Select menu item INTER CTIVE TV with V or A and press OK to confirm INTER CTIVE TV menu is displayed 3 Select the line Connection Type with w or A and select Wireless with gt 4 Select Network Configuration with w or A and select the option Auto with gt INTER CTIVE TV cel Network Settings Connection Type Wireless N A Network Settings Auto 10 134 151 15 10 134 150 8 255 255 255 0 10 134 151 254 5 Select the line Select Access Point with V or A and press OK to confirm Select Access Point menu appears and available wireless networks are scanned and displayed in the menu 6 Select the network that you want to connect with W A or gt and press OK to confirm Wireless connection password screen is displayed 7 Select the required character with w A or gt and move to the next character with OK Select ABC for uppercase and abc for lowercase and press OK to confirm Select 123 or numbers and symbols and press OK to confirm Select to delete the character entered and press OK to confirm Enter the password and use V A or gt to select Submit and press OK
72. ettings IP Address Netmask Gateway and DNS must be configured manually Automatic connection Most of the home networks are Dynamic If you have a dynamic network you must use a DSL modem that supports DHCP Modems and IP sharers that support DHCP ob tain the IP Address Netmask Gateway and DNS values required for internet access automatically and thus you are not required to enter those values manually 1 Open the menu with MENU 2 Select menu item INTER CTIVE TV with V or A and press OK to confirm INTER CTIVE TV menu is layed INTER CTIVE TV ceh Ni CABLE Connection Type Network Settings Auto 10 134 151 15 10 134 150 8 255 255 255 0 10 134 151 254 E1 DF BF 92 00 11 32 ENGLISH 3 Select the line Connection Type with w or A and select Wired with gt 4 Select Network Configuration with w or A and select Auto with gt 5 Select Connect with e red to establish the modem connection Connecting Please wait message will be displayed 6 Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 7 Press MENU lt to end the se
73. ew mode with or gt options Full Screen Mode Widget Modex Notification Mode My Applications or Close and press OK to confirm Note m This feature is not supported in all applications ENGLISH 41 SMART INTER ACTIVE TV 2 0 FUNCTION Browser main menu Application gallery 2 Applications Kategorie der Applikationen 4 Switch to the Application Store Navigating in the main menu 1 Select the desired category with w or A and press gt lt to enter application field 2 Select the required application with w A and gt and press OK to confirm The Main menu of the application will be displayed after a short while 3 The use of the application mainly depends on the structure of the application itself Follow the notes on the screen 42 ENGLISH t User dd mm yyyy hh mm Playing and other options in the applications Note m Some applications do not support all playing options and playing options may vary among different applications gt lt starts playing in the applications Ilk pauses playing in the applications llc stops playing in the applications A QN During playback press 4d or gt P to search pictures 5 During playback press or gt to skip forward backward 6 V A and gt allows sliding of the navigation keys in the appl
74. fter this time has elapsed the television switches to standby mode 1 Open the Tools menu with TOOLS 2 Select the line Sleep Timer with w or DAK 3 Enter the switch off time with or gt Note m To switch off the function use or gt to set the switch off time to Off ENGLISH 25 TELEVISION OPERATION Zapping function This function remembers the channel you are currently watching while you switch over to other ones zapping 1 Press 1 0 or P P to select the channel to be stored in the zapping memory and press 4 to confirm 2 Press 1 0 or A W to switch to another television channel 3 Press lt em to switch between the saved tel evision channel and the last television chan nel viewed 4 End the function with MENU 26 ENGLISH Electronic TV guide The electronic TV guide provides an overview of all programmes that will be broadcast in the next week for digital channels only 1 Press GUIDE to display channel informa tion Notes m Not all channels supply provide a detailed TV guide m Many broadcasters transmit the current schedule but do not offer detailed descrip tions m There are broadcasters which do not pro vide any information at all 2 Press W or A to select a television channel Today s programmes on the television channel selected are displayed 3 Switch to the informati
75. ge the channel CONVENIENCE FUNCTIONS Power LED Brightness You can adjust the stand by LED In stand by mode the LED is always flashing with reduced brightness 1 Inthe SETTINGS menu select the line Power LED Brightness with W or A 2 Use or gt to select options High or Low 3 Press MENU to end the setting Updating software OAD from satellite for digital channels only 1 In the SETTINGS menu select the line Check For Updates with VW or A and press OK to confirm Select the column OAD with or gt and press OK to confirm A search for new software will be made and if available it will be installed Note m If a search for software updates should be made automatically select the line Auto matic OAD Update with VW or A and use or gt to select the option On The software will be updated automati cally as far as possible Press MENU to end the setting Updating software Online from the internet for digital channels only 1 In the SETTINGS menu select the line Check For Updates with W or A and press OK to confirm 2 Select the column Internet with or gt and press OK lt to confirm A search for new software will be made and if available it will be installed Note m If a search for software updates should be made
76. gital channels only informs you about any schedule changes at short notice and provides an overview of all the broadcasters schedules for the next few days Detailed information on the individual television programmes are when provided by the broadcasting station are also avail able in the electronic TV guide You can connect various data media such as an external hard drive a USB memory stick or a digital camera to the USB socket Using the file browser you can then select and play the file formats of your choice for example MP4 MP3 or JPEG data Using the time shift function you can quickly and easily pause a programme using the re mote control and resume it at a later stage The programme is recorded in an external data medium 6 ENGLISH m You can record any digital TV channels you choose The TV channels are converted by the televi sion and saved on an external data medium which is connected to the USB socket The saved programmes can be called up and played from the archive on the external data medium at any time You can also play a programme from the archive while recording another More information on recording and playing TV programmes can be found from page 50 m Your Grundig television and 3D glasses can provide the reality of the cinema when you watch 3D movies in your home This TV uses state of the art LED technology to give you the best experience 3D has to offer To join the 3D world you just
77. he AUTOMATIC CHAN NEL SEARCH menu with red s SETUP i l Q AUTOMATIC CHANNEL SEARCH Satellite Other ASTRA 19 2 E Free Scramble Connection Type Operator Selection Select Satellite Scan Mode All Off 9 Select the line Scan Mode with w or A Select the scan mode with or gt for unencrypted channels for encrypted channels only or for both 10 Select the line Service Type with w or A Use or gt to select whether you want to search for television channels only TV radio stations only Radio or both Radio TV 16 ENGLISH Note E t is possible that some TV channels tran sponders cannot be found This is caused by a change in satellite parameters made by the broadcaster e g new channels have been added Set the Network Search op tion to On 11 Start the scan with e red The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note mYou can abort the scan by pressing MENU 12 Press MENU to end the setting Note m If other television channels are to be tuned from a second satellite proceed as follows Open the menu with MENU select the line SOURCE SETUP with w or A and press OK to confirm
78. ht extend to the right the better the reception signal The signal level not only depends on your receiver system but also on the channel which is currently active Remember this when aligning your antenna based upon the signal level display Press MENU to close the menu SPECIAL SETTINGS Deactivate and activate HbbTV This option allows switching off HbbTV feature the hint for HbbTV function shall not be dis played during selecting the channels 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm 3 Select the line HBB TV with w or A Select the option Off with or gt 5 Press MENU lt to end the setting Note m To activate HbbTV again select in step 4 the option On Deactivate and activate digital teletext If you deactivate digital video text only normal video text can be selected however the other functions of the interactive service HbbTV are still available 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm 3 Select the line Digital Teletext with v or WANK Select the option Off with or gt 5 Press MENU lt to end the setting Note m To activate Digital Teletext again select in step 4 the option On ENGLISH 89 INFORMATION GRUNDIG 47 VLE 9474 BL Product Fiche Energy Effi
79. ications and virtual keyboard 7 Press OK to confirm the selections in virtual keyboard and applications 8 Press 1 0 e red ee green eee yellow eeee blue to select enable various functions in the applications 9 closes the menu GRUNDIG appLICATION store SMART INTER ACTIVE TV 2 0 FUNCTION Plugged into Skype Your TV is Plugged Into Skype Plugged Into Skype feature allows you to make audio and video calls from Skype to Skype for free any where in the world via internet connection You need internet access and a Grundig cam era G VCAM O1 with integrated microphones please ask your specialist retailer TM id You can use your Skype account if available or create a new Skype account using your TV Important information about Skype m Skype feature requires that your TV is connected to internet m No emergency calls with Skype Skype is not a replacement for your ordinary telephone and can t be used for emergency calling m Skype calls made over wireless connection may have lower audio and video quality Connect GRUNDIG G VCAM 01 Camera and Microphone unit directly to USB1 or UUSB2 HDD USB interface of the TV Do not use a USB HUB m Audio and video calls made with other Skype users are free For other Skype services such as calling mobile or land phones with lower cost Skype Credit or a subscription is
80. ideo ABOUT DIVX VIDEO ON DEMAND This DivX Certified de vice must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device USB setup menu Go to vod divx com for more information on how to complete your registration 60 ENGLISH Basic playback functions 1 Select the data medium by pressing f gt use V A or gt to select the option USB and press OK to confirm The file browser appears 2 Select the file format video files audio files picture files with w or A 3 Switch to the folder file list with OK Note m USB data medium with several partitions is connected to the USB sockets the letter for the respective drive e g C appears behind the folder symbol Select the letter of the drive with v or A and press OK to confirm 4 Select the folder or file with w or A and press OK to open it A list of subdirectories appears Note m Switch back to the main folder with 5 Select the track or picture with W or A and press gt to start playing Notes m You can view information on the film data by pressing m When playing MP3 or WMA dato information on the album track and singer is displayed at the left of the menu m When playing picture files you can use to display information about the resolution and
81. ideo signals m Suitable devices Digital satellite receivers Playstation BluRay player DVD player recorder set top box notebook PCs m Video signal Digital video resolution stand ard 576p HDTV 720p 1080i 1080p m Audio signal digital audio stereo multi chan nel compression uncompressed m Presets HDMI 1 HDMI 2 HDMI 3 or HDMIA 1 Connect the HDMI1 HDMI2 ARC HDMI3 or HDMI4 socket on the televi sion and the corresponding HDMI socket on the external device using a standard HDMI cable digital video and audio signal With analogue video signal progressive m Suitable devices DVD recorders players games consoles m Video signal YUV resolution standard 576p HDTV 720p 1080i 1080p m Audio signal stereo analogue E Component preset 1 Connect the COMPONENT Y Pb Pr sockets on the television to the correspond ing sockets of the external device with RCA cables video signal 2 Connect the gt COMPONENT L Rk sockets on the television to the corresponding sock ets of the external device with RCA cables audio signal Using the SCART socket CVBS RGB signal m Suitable devices Digital satellite receiver DVD player recorder set top box games con sole video recorder decoder m Video signal CVBS RGB m Audio signal stereo analogue m AV1 preset 1 Connect the AV1 S VHS socket on the television and the corresponding
82. ind a description of how to tune the television channel of your choice de pending on the antenna connected in the following chapters SETTINGS Tuning the television channels from satellite DVB S You have two options for tuning digital satellite channels A The easy installation which pre configures all antenna settings for the satellite channels on Astra 19 2 East B The advanced installation can be used if you wish to receive satellite channels from various satellites To do so you must make the antenna settings Satel lite LNB Power LNB Type DISEqC Mode LNB Selection for the satellites chosen Easy installation 1 Inthe Source Setup menu in the Connec tion Typex line select the option Satellite with or gt 2 Select the line Easy Installation with w or A and press OK to confirm Other menu options will be displayed the satellite Astra 19 2 East is preset 3 Start the scan with ee green The Search results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note m You can abort the scan by pressing MENU Advanced installation 1 Inthe Source Setup menu in the Connec tion Typex line select the option Satellite with or gt 2 Select the line A
83. ing on the type of LNB to Off 13 18 V or 14 19 V with or gt LNB Typex Select the LNB type used in the satellite system with or gt If you are using a satellite antenna with an Single Cable Distribution multiswitch select the setting Grundig SCR After it please perform the User Band KB Frequency and LNB Selection settings in the submenus The necessary parameters you will get from the operator of the satellite antenna Use only this specification User Band Select the user band number assigned to the user with or gt SPECIAL SETTINGS KB Frequency MHz Enter the user band frequency assigned to the user band with 1 0 buttons LNB Selection If more than one satellites are used in the current SCR system select 1 2 to 2 2 lt for the satellite corresponding to the relevant positions using or gt buttons Notes m Use installation equipment supported suggested by your Multiswitch m Other users receivers connected to the system may be affected if the specified user band number and frequency is changed during installation m User band and User band frequency is specified on the Multiswitch used and each user receiver uses a specified user band and user band frequency mWith SCR satellite system auto search by several users receivers at the same time may cause problems 22 KHz Depending on
84. into folders and subfolders ENGLISH 57 USB OPERATION Connecting external data media Before connecting the external data medium it is recommended to switch the television to stand by mode Before removing the external data medium the television set must be switched to standby so that no data loss occurs Notes m The USB1 socket of the television set supplies a maximum power of 500 mA in accordance with USB specifications Exter nal hard disks which require more power may therefore only be connected to the USB2 HDD of the television set m If you use a network cable for external hard disks which are connected to the USB2 HDD socket on the television this net work cable must also be disconnected from the power supply when the television is switched off m External data media may not be disconnect ed from the television set while files on the data medium are being accessed m A bi directional data transfer as defined for ITE Information Technology Equipment devices in EN 55022 EN 55024 is not possible m USB transfer is not in itself an operating mode It is only an additional function 58 ENGLISH Press 1 0 or P or P to switch on the television from standby mode Connect the USB2 HDD socket of the television and the corresponding socket on the data device external hard drive digital camera card reader or MP3 player using a USB cable or insert the
85. irm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm Caution m The antenna power supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna 4 Select the Active Antenna Power with V or A Switch on the antenna pow er supply for the antenna with or gt On 5 Select Digital Manual Tuning with w or A and press OK to confirm The menu appears 6 Enter the channel number directly with 1 e O After the search is complete the channels found are displayed in the Results menu 7 Press MENU lt to finish the setting Tuning analogue television channels This setting is only necessary if you cannot re ceive any digital channels and you have not car ried out an analogue search during initial setup The television channels can be set directly or using the scan Switching the television to analogue reception Note m Analogue channels can be selected if the option Air or Cable has been selected 1 Open the Select input source menu with 2 Depending on the
86. is marked as the end point B The television repeats the programme be tween these two points 3 Quit the repeat function with E 56 ENGLISH Playback during a recording During a recording you can either watch the programme you are currently recording or watch a different one that you have already recorded 1 Select the channel to be recorded with 0 or P P and press ik to start the recording 2 Select the Recorded Event menu by press ing REC LIST 3 Select the programme you want with w or A and press P gt to start playback The recording continues in the background Press flll to end playback 5 Press ill to stop recording Deleting programmes in the recording list You can delete programmes from the record ing list 1 Open the Recorded Event menu with REC LIST The menu appears 2 Select the programme to be deleted with W or AK 3 Press e blue to delete the programme 4 Confirm the security query with ee green Note m You cannot delete programmes in the Recorded Event menu which are currently being recorded or played back 5 Press MENU to close the menu USB OPERATION File formats Your television can work with the following file formats using the USB sockets Video data Special codecs for video compression and decompression provide more memory space without compromising the picture qua
87. ivX files only video files 1 During playback select the next chapter with gt 2 During playback select the previous chapter with Note m You can also select chapters by entering the chapter number with 1 0 Selecting titles on DivX files only video files 1 During playback select the next title with DAK 2 During playback select the previous title with w Playing selected titles Only the marked tracks are played 1 Select the titles with v or A and press OK to mark it 2 Select the next title with W or A and press OK to mark it 3 Start playback with P 4 Press lll to end playback Note m To remove the marking select the title with V or A and press OK to remove the marking ENGLISH 61 USB OPERATION Selecting a track or picture in steps SKIP 1 During playback select the next track picture with P 2 During playback select the previous track picture with Playback begins with the track or picture you selected Selecting a certain passage for playback video files only 1 During playback press OK 2 Enter the passage time with 1 O and press ee green or OK to confirm Fast forward for video and audio files only You can select different speeds 2 fold 4 fold 8 fold 16 fold and 32 fold forwards and back wards 1 Select the playback speed during playback
88. kype enabled the call will be displayed on the lower right corner of the screen 2 To make a video call use or gt to select Video option and press OK to confirm or to make an audio call use or gt to select Voice option and press OK to confirm Note m To decline the call use or gt to select Decline option and press OK to confirm Skype status Status symbols are displayed on the Skype ac count and Skype contacts list and these symbols indicate whether these contacts are available for Skype calls Meanings of Skype symbols are as follows gt Online Away gt Do Not Disturb 26GA Offline Changing the Skype status 1 Press ee green button on Skype main window Status menu will be displayed 2 Select one of the gt O Online AT Away Do Not Disturb or G Offline options with w or A and press OK to confirm The Skype status you have selected will be displayed in Skype account and in the Skype contacts SMART INTER ACTIVE TV 2 0 FUNCTION Skype options The History option This section provides information on incoming and outgoing calls 1 In the Skype mains menu select the menu item History with W or A and press gt to confirm The History will be displayed 2 Press to backspace to the zum Skype main menu The Options menu
89. l out the mains plug for environmental and safety reasons This way the television does not consume any electricity m If the device is equipped with a power switch switching it off using this switch will be suffi cient The energy consumed by the television set is reduced to virtually O W E In standby mode the television set uses very little energy However it may be necessary to leave the television set in standby mode for certain functions for example automatic switch on and switch off and for timer func tions m The television set uses less energy when the brightness is reduced Notes on still images Watching the same image for a long time on the screen may cause a still image remains feebly on the background Feeble image s on the back ground is originated from LCD LED technology and does not require any action under guaran tee To avoid such cases and or minimize the impact you may observe the tips below Do not allow the same TV channel to stay on the screen for a very long time Channel logos may cause this situation Do not allow the images which are not full screen to constantly stay on the screen if not streamed in full screen format by the broad caster you can convert the images to full screen by changing picture formats m Higher brightness and or contrast values will lead this impact to appear faster therefore you are recommended to watch your TV in the lowest brightness and contrast level
90. lect teletext pages directly Return to teletext page 100 with 3 Go back a page with w 4 Go to the next page with A 5 Quit teletext with TXT Note m Teletext feature is not supported in 3D mode Additional functions Skipping the waiting time While a page search is progressing you can switch to the TV programme 1 Enter the teletext page number with 1 0 and then press P As soon as the page is found the page number is displayed 2 Press gt to switch to the teletext page Enlarging the character height If you have difficulty reading the text on the screen you can increase the character height 1 To enlarge the character height of a teletext page keep pressing 4 Page hold A multiple page may contain several sub pages which are automatically scrolled by the broad casting station 1 Stop the automatic scrolling of the sub pages with dde 2 Quit the function with 4d Opening a sub page directly If the selected teletext page contains additional pages the number of the current sub page and the total number of pages are displayed 1 Press to open the sub page function 2 Use or gt to select the sub page 3 Quit the function with Revealing answers Certain teletext pages contain hidden answers or information 1 Display information with P gt 2 Press to conceal the information Split screen This functi
91. lication will be displayed after a short while Note m If you do not have access to Skype ignore the first line of the lon on menu and continue operation from point 4 3 Select Create Account option with w A and gt and press OK to confirm License Agreement menu is displayed 4 Select the push button Skype Terms of Use with W A and gt and press OK to confirm Select the push button Agree with w A and gt and press OK to confirm 5 Select the push button Privacy Policy with V A and gt and press OK to confirm Select the push button Agree with w A and gt and press OK to confirm 6 Select the push button Agree with w A and gt and press OK to confirm 7 Enter data for Skype name password and e mail address Select the required rows with w A and gt and confirm with OK Select the required characters numbers with VW A and gt and confirm with OK To save use V A and gt to select the Enter button and confirm with OK 44 ENGLISH After entering all log on data select the l Agree button with v A and gt confirm with OK Registration will be completed and main menu of the application will be
92. lifier AV receiver with a standard HDMI cable digital audio signal or 2 Connect the Optic Out socket on the television to the corresponding socket on the AV receiver using a standard optic digital cable digital audio signal Important Do not use a HDMI cable longer than 5 m for HDMI ARC connection Apply the device with HDMI ARC function and activate HDMI ARC 1 Switch on the the multichannel amplifier or the AV receiver If a Blu ray Player is connected on the AV receiver the player must be switched on too 2 Open the Tools menu with TOOLS button 3 Select the menu item CEC with w or A and confirm with OK The HDMI CEC Device List appears 4 Start device search with e red button Audio device connected to the HDMI2 ARC source shall be displayed in the list Dolby and the double D logo are trademarks of Dolby Laboratories Manufactured under licence from Dolby Laboratories Notes m If the audio system also has a playing function e g Home theater system including DVD player function two devices will be listed on the HDMI CEC list The first one is the player and the second one is the audio playback m If a Blu ray Player is connected to the AV receiver please remove the Disc from the Player during the registration 5 Press MENU button to exit the HDMI CEC device list 6 Open the menu with MENU button 7 Select the menu item SOUND
93. lity exces sively Your television plays video files in the formats DIVS XVID H 264 MPEG 4 AVC L4 1 4 ref erence pictures MPEG 4 MPEG 2 MPEG 1 MJPEG and MOV The following file name extensions are also sup ported AVI MKV MP4 TS MOV MPG DAT VOB These files can also contain audio files compressed using MP3 AAC or Dolby Digital Audio data Your television can play audio data in the for mats MP3 AAC MP3 is the abbreviation for MPEG 1 Level 3 and is based on the MPEG 1 standard which was developed by the MPEG Motion Picture Expert Group AAC stands for Advanced Audio Coding and was also developed by MPEG AAC provides better sound quality at an identical data rate WMA Windows Media Audio is a compres sion standard for audio data developed by Microsoft These formats allow audio files to be recorded and played which sound as good as a CD while taking up only a fraction of the memory space File name extensions which are supported MP3 MP2 WMA M4A AAC MP3 files can be organised into folders and subfolders as on the computer Image data Your television can display pictures in the formats JPEG PNG and BMP JPEG stands for Joint Picture Experts Group It denotes a process for compressing picture files PNG and BMP are process used to save image data with no or very little losses Picture files can be stored with other types of files on one medium These files can be organised
94. mber of television channels received this can easily take a few minutes The search is complete as soon as the PROGRAM TABLE appears Note m You can abort the search by pressing MENU 11 Press MENU to end the setting ENGLISH 79 SPECIAL SETTINGS Searching for digital television channels from a satellite manu ally If you know the parameters of a new television channel you can also search for it manually Current transponder data can be found in the teletext in satellite TV magazines or on the Internet 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Digital Manual Tuning with W or A and press OK to confirm The menu appears 4 Select the line required for the parameters with W or A Frequency MHz Enter the five digit frequency with 1 O Symbol Rate kS s Enter the five digit symbol rate with 1 O Polarization Use or gt to set the polarisation to Horizontal or Vertical Network Search use or gt to se lect the option On or Offe Scan Mode Use or gt to select whether you want to search for unencrypt ed Unencrypted channels only encrypt ed Encrypted channels only or for both Unencrypted Encrypted Service Type
95. me with this op tion This option is recommended if your cable provider does not support the scan type Quick Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet Start the scan with ee green The Search Results menu appears and the search for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLEx appears Note mYou can abort the scan by pressing MENU Press MENU to end the setting Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 1 If the level is displayed in green you can record HD channels without any problems ENGLISH 17 SETTINGS Changing the program table for the digital channels Channels which are found using the scan are saved in the PROGRAM TABLE You can delete channels which are not required from the programe table you can change the order of channels within the programe table only satelite channels DVB S and lock individ ual channels Parental control You can also add channels to the favourites list in addition you can change the order of chan nels within the favourites list With ee green
96. n to save the value 7 Select the line Netmask with w and press OK to confirm Enter the Netmask address with 1 0 and press ee green to save the value 8 Select the line Gateway with w and press OK to confirm Enter the Gateway address with 1 0 and press ee green to save the value 9 Select Connect with e red to establish the modem connection Connecting Please wait message will be displayed 10 Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 11 Press MENU to end the setting ENGLISH 33 NETWORK INSTALLATION Wireless network connection 1 The Television includes a built in Wireless WiFi Adapter to connect it to wireless network 34 ENGLISH Notes m Wireless LAN adaptor supports IEEE 802 11B G and N communication protocols We recommend you to use IEEE 802 11N protocol to obtain the best performance in HD video playback m f you use a modem that supports IEEE 802 11B G video playback performance may be poor when compared to a modem that supports IEEE 802 11N since the data transfer rate of IEEE 802 11B G protocol is lower m Please note that video playback performance in
97. n deciding where to put the device re member that furniture is often coated with various types of varnish and plastic Many of these contain chemicals which can corrode the feet of the device leaving marks on the surface of the furniture which can be difficult or impossible to remove m The screen of your LCD LED television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds speci fied by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty m To ensure fires do not occur always keep candles and amp other open flames away from the device SETUP AND SAFETY Do not connect any other equipment while the device is switched on Also switch off other equipment before connecting it Do not plug in the power cord of the device until you have connected the external equip ment and the antenna m Make sure the mains plug is freely accessible m Keep the TV away from following devices as much as possible cell phone microwave and other devices that uses high frequency radio wave Otherwise TV may be malfunction due to radio wave interference Do not expose the batteries to excessive heat such as direct sunlight fire etc Do not use old and unused batt
98. n from standby Selects channel directly Selects the channel list All FAV 1 to FAV 4a Opens the 3D menu Displays information Opens the main menu Opens the channel list Opens the TOOLS menu Opens closes the control menu when playing a file in DLNA menu Adjusts the volume Muting Record play pause and stop only digital television channels on from an exter nal data medium Opens the PRnP menu Navigation in the menus Switches on and off Standby Switches between teletext and TV mode Opens and close the Quick Apps menu Zapping function switches back one menu level in the menus Opens the electronic TV guide Opens menu for AV channels and USB input Then select using v gt or A and press OK to confirm Switches on from standby Selects channel in steps GRUNDIG The GRUNDIG Voice Remote 12 ENGLISH Moves the cursor up and down in the menus Moves the cursor to the left and right in the menus Activates various functions and save functions settings As an alternative to the included remote control you can also operate your television with the new GRUNDIG Voice Remote Your television is operated using simple voice commands Additional information on the GRUNDIG Voice Remote is available from your retailer OVERVIEW The remote control All functions red green
99. nal Information Automatic Service Update On CA Modul Not inserted TSystem Active Antenna Power Off Band Channel Fine Tuning 5 Select the line Scan Typ with w or A and set the option ATV with or gt 6 Start the scan with e red Note 4 Select the line Program Nox by pressing v m After starting the scan a security query will or A and use or gt to save the preset appear Press ee green to confirm the 5 option Yes All channel and favourites lists for the ana logue channels will be deleted and com piled anew 6 Select the line Channel with w or A The Results menu appears and the scan and enter the channel number with or gt for TV channels begins Depending on the T by an ch 1 0 to enter the chan eh nel number directly or number of television channels received start a automatic scan with green oder this can easily take a few minutes Il gt veee yellow The search is complete as soon as the PRO GRAM TABLE appears Notes m The current system is displayed in the Select Band by pressing W or A and use or gt to choose between S special channel or C normal channel Note System line If the colour or sound is mYou can abort the search by pressing not functioning properly select the line MENU System with Ww or A Use
100. nel names 8 digit maximum 1 In the PROGRAME TABLE menu select the television channel with v A or gt and press e red to confirm 2 Open the input keyboard with ee green Note m f necessary delete the current channel name To do this select the lt button with or gt and delete repeatedly using OK 3 Select the required letters or numbers with V A or gt and confirm with OK Repeat the entry for further letters numbers Note m Use the ABC button to switch to upper case letters and use the 123 button to switch to symbols and numbers 4 Save the channel name by using V A or gt to select Submit and confirm with OK Note m If you wish to enter other channel names repeat steps 1 to 4 Skipping television channels You can highlight television channels to be skipped when you select with A or w Selection is still possible using the number buttons 1 Inthe PROGRAMETABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked using Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK
101. o gramme from the archive It is only possible to change the program po sition if the programs are broadcast on the same frequency DVB T or if they are on the same transponder DVB S It is also possible to change the source during recording to an exter nal device e g HDMI1 AV1 etc except the USB source One touch programme recording 1 Select the television channel to be recorded with 1 0 or P P and press k to start the recording Information on the recording is displayed the recording symbol the channel name the programme the recording time and the available memory space After a short time this information disap pears End the recording with E 3 Confirm the display with ee green or press e red to continue the recording Notes m After the recording is complete the record ing will be automatically saved on the exter nal data medium m The RECORDED FILES menu with the ar chived programmes can be opened with REC LIST m If the external data medium is disconnected from the USB socket during recording the recording will be stopped automatically and will not be saved ENGLISH 53 USB RECORDING Recording a programme from the channel list 1 Open the CHANNEL LIST with OK 2 Select a television channel with w A or gt and press OK to confirm 3 Press MENU to exit the channel list 4 Press x to
102. o 3D you can adjust the most suitable effect depending on your personal preferences 1 Select Effect mode with W or A and set it to On with or gt 3D Perspective and Depth options are activated 2 Select 3D Perspective with W or A and adjust with or gt 3 Select Depth with w or A and select the picture setting as Low Medium or High with or gt 4 Press MENU to end the setting Left Right Correction When Frame Packing mode is enabled in HDMI source 3D perception may disappear in 3D films or 3D games due to a synchronization shift arising from HDMI signal You may correct 3D perception with this feature 1 Select LeftRight Correction with w or DAK 2 Press or gt to switch the function On Note m Set the function to Off with or gt 3 Press MENU to end the setting 30 ENGLISH Formats supported by HDMI 1 4 With HDMI 1 4 your TV can recognise and play 3D content The formats supported are shown in the follow ing table For 3D Blu Frame Packing 1080p ray films 23 98 24Hz For 3D Frame Packing 720p 50 or games 59 94 60Hz For 3D films from broadcas ters Side by Side 1080 50 or Horizontal 59 94 60Hz 720p 50 or 59 94 60Hz 1080p 23 97 24Hz Top and Bottom Note m HDMIA input does not support HDMI1 4 NETWORK INSTALL
103. oms If you do use it outdoors make sure it is pro tected from moisture such as rain or splashing water Never expose the television set to moisture Do not place any vessels such as vases on the television as they may spill liquid thus present ing a safety risk m Place the television on a hard level surface Do not place any objects such as newspapers on the television or put cloth or similar items under it Do not place the television close to heating units or in direct sunlight as this will impair cooling m Heat build up can be dangerous and shortens the service life of the television For reasons of safety have a repairman remove any dirt in the television from time to time m Never open the television under any circum stances Warranty claims are excluded for damage resulting from improper handling a ENGLISH m Make sure the power cord or the power sup ply unit if provided are not damaged m Only operate the television with the power supply power cord provided m Thunderstorms are a danger to all electrical devices Even when the television is switched off it can be damaged by a lightning strike to the mains or the antenna Always disconnect the mains and antenna plugs during a storm m Use a damp soft cloth to clean the screen Do not use water with soap or detergent m Only clean the housing of your television set with the cloth provided Do not use water with soap or detergent m Whe
104. on about the current programme with gt Notes m You can open and switch off the extensive programme information with m You can can added the selected broadcast to the memory timer by pressing OK 4 Press W to select information on the next programme and A to return to the infor mation for the current programme 5 Select programmes on over the coming days with ee green and switch back to the cur rent day with e red 6 Switch back to the channel selection with Note m Filter for certain programmes with eeee blue select the channel type with gt V or A and press OK to con firm Programmes which match the selected channel type are displayed 7 Quit the electronic TV guide with MENU TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 format if this format is detected via the SCART socket 1 Open the Tools menu with TOOLS 2 Select the menu item Picture Format with V or A and press OK to confirm 3 Select the picture format with or gt and press OK to confirm You can choose between the following picture formats Auto format The picture format is automatically switched to 16 9 for 16 9 programmes The picture format is automatically switched to 4 3 for 4 3 programmes 16 9 and 14 9 formats For programmes in 4 3
105. on with OK or cancel the operation with 4 lt 4 Press OK to end the operation Sorting the internet applications You can change the order of the applications in stalled on your TV as you like 1 Select the desired category in GRUNDIG AppLICATION store with W or A and press gt to enter application field Note m Applications can only sorted in gt All Applications category 2 Select the application you want to move with W A and gt and press eeee blue to confirm 3 Press W A and gt to move the applications to its new position and press OK to confirm Note m Perform steps 2 and 3 again to move other applications Rating internet applications You can rate applications installed on your TV individually 1 Select the desired category in GRUNDIG ApplLICATION store with w or A and press gt to enter application field 2 Select the application you want to rate with V A and gt and press eeek yellow to confirm 3 Select the application rating with W A and gt and press OK to save or press lt to cancel rating Application view mode For various applications you can see the live broadcast while using the application 1 Press after starting the application Application View Mode menu will be displayed 2 Select the desired Vi
106. on your Grundig TV You can down load many applications from GRUNDIG AppLI CATION store These applications include audio and video conferencing video picture and music applications social networks news and sports weather applications and doctor or phar macy search recipes and viewing traffic conges tions depending on your local city Also you can make a call via the Internet Notes m Availability of Smart Inter ctive TV 2 0 inter ctive applications may vary depending on the country m Smart Inter ctive TV 2 0 cannot download and save files cannot upload files to a web site and cannot install add ins except Login pages of some applications for applications other than the ones in GRUNDIG ApplLICATION store m Under no circumstances Grundig is not responsible for the content and the quality of content offered by the content providers m local and global internet applications provided through your Smart Inter ctive TV 2 0 comes with your TV within the framework of special limited duration agreements entered into with the application owners Application owners may update modify restrict or entirely remove those applications with their own decision Grundig cannot be held responsible for such changes m Grundig reserves the right to make all changes such as modifications restrictions extensions transfers and removals on internet applications provided through your Smart Inter ctive TV 2 0 m n Login process of som
107. ons allows you to display the televi sion channel on the left side the teletext on the right side 1 Switch the function on with Bi lt The television channel and teletext are dis played next to each other 2 Switch the function off with B ENGLISH 63 INTERACTIVE PORTAL HBBTV What is HbbTV To put it simply HbbTV provides nextgeneration interactive teletext with modern structured con tent high definition pictures and video sequenc es and interactivity To receive HbbTV the television must be con nected to the internet ARD is currently offering this new service with its third programmes as is ZDF Das Erste Mediathek Neueste Clips Sendungen A Z a B Alina 06 08 12 min 18 ARD Ratgeber Auto Verkehr A niga ARD Ratgeber Geld nachtmagazin ARD Ratgeber Gesundheit aus Nachtmagazin 115 11 Uhr 08 08 2012 ARD Mittagsmagazin ARD Ratgeber Bauen Wohnen The ARD offering includes for example a de tailed programme overview the full offering of Das Erste Mediathek as well as graphical re structured teletext with high definition pictures The ZDF offering includes the ZDF mediathek and other programme information as of jull 2012 The HBBTV Service is only available in some countries Alle Mediatheken 3 os 4 Sendung verpasst Heute 08 08 2012 Tagesschau Tagesschau Tagesschau Tagesschau ARD Ratgeber Heim Garten ARD Ratgeber R
108. or A and select Wireless with gt Select the line Select Access Point with V or A and press OK to confirm Select Access Point menu appears and available wireless networks are scanned and displayed in the menu Select the network that you want to connect with W A or gt and press OK to confirm Wireless connection password screen is displayed Select the required character with w A or gt and move to the next character with OK Select ABC for uppercase and abc for lowercase and press OK to confirm Select 123 or numbers and symbols and press OK to confirm Select J to delete the character entered and press OK to confirm Enter the password and use W A lt or gt to select Submit and press OK to confirm Notes m In WEP encryption system more than one network password can be assigned to the network Your television can connect the network only with the password in level one m For TV to discover the wireless modem on the network the network name should support ASCII characters 36 ENGLISH Select the line Network Configuration with W or A and select the option Manual with gt IP Address DNS Netmask and Gateway and options are active Select the line IP Address with w and p
109. other devices Place the device in a different position Ghosting reflection Channel setting Automatic or manual tuning fine tuning Have antenna cable or system checked No colour Colour intensity too low Turn up the colour Adjust TV standard if setting option is Select the correct colour standard available Problem at station Try a different channel Picture but no sound Volume is set to a minimum Turn up or switch on the volume Teletext impaired or absent Problem at station Try a different channel Television channel no teletext Try with a different TV channel or antenna system carry out fine tuning Station signal too weak Check antenna The remote control does Obstacle between remote control and Point remote control at television not work device Battery problem Check batteries and replace if necessary Operating mode undefined Switch off the television at the mains switch for two minutes Picture too dark in PC mode Incorrect setting for picture resolution Change settings on the PC and picture frequency on the PC e g 1280 x 768 resolution refresh rate 60 Hz DMS device cannot be found DMS device is not switched on or Make sure that the DMS device is on not started and operating Network connection settings are not Check the network settings made 92 ENGLISH INFORMATION Low image quality pixel in WLAN mode Warnings about the connec tion problems on the display Videos in video aplications are lagging
110. ource with w or A and press OK to confirm Select the option Cable with gt W or A and press OK to confirm 4 Select Digital Manual Tuning with w or A and press OK to confirm The menu appears 5 Enter the four digit frequency with 1 O The search starts after confirming the channels found are displayed in the Re sults menu 6 Press MENU to finish the setting ENGLISH 83 SPECIAL SETTINGS Searching for digital terrestrial TV channels automatically 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with v or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm Caution m The antenna power supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna Select the Active Antenna Power with w or A Switch on the antenna power supply for the antenna with or gt On Select the line Automatic Channel Search with W or A and press OK to confirm Th
111. play Stereox You can switch the sound to Mono if the stereo sound quality is poor 1 Select the line Audio Type with w or A and adjust the setting with or gt Night Mode Night Mode prevents fluctuations and sudden increases in volume 1 Select the line Night Mode with w or DAK 2 Activate On or deactivate the night mode by pressing or gt Note m Night Mode appears in menu if SRS SSHD has been selected in Sound Modex SETTINGS Stereo width This broadens the sound output for stereo pro grammes and improves the sound with mono reception l Select the line Audio Mode with w or A 2 Select the option Spatial with or gt Soundeffects This menu offers three preset sound effects Music Natural and Speech and one setting to be created by you User 1 Select the line Sound Preset with W or DAK 2 Select the sound effect Music Natural or Speech by pressing or gt Note m User option is active when Sound mode setting is selected as Normal or Spatial SRS StudioSound HD SRS StudioSound HD is a patented audio tech nology which is integrated into the television set and only requires the built in speakers to gener ate a Surround Sound effect 1 Select the line Sound Mode with w or A 2 Select the option SRS SSHD with or gt 3
112. posi tions can be saved Press OK and then select the saved position with or gt Press ee green to confirm the anten na will be aligned with the saved position Store Stored Position The current anten na alignment is saved Llimit Position Defines the range in which the antenna may move Use to set the western limit use gt to set the eastern limit Reset DiSEqC 1 2 Limit Resets the limit position of the antenna Press MENU to end the setting ENGLISH automatically 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with vw or A and press OK to confirm Select the option Cable with gt V or A and press OK to confirm Select the line Automatic Channel Search with w or A and press OK to confirm The menu appears ES SOURCE SETUP T AUTOMATIC CHANNEL SEARCH Cabel UK Connection Type Country Scan Type DTV amp A Quick Auto Auto Cable Scan Type Frequency MHz Network ID 5 Select the line Scan Typ with W or A and set the option DTV with or gt 6 Select the line Cable Scan Type with w or A and set the option Quick or Full with or gt The search function Quick se
113. programmes Recording and playback of television pro grammes is only possible with digital television channels DVB S DVB T and DVB C m The digital television channels DVB S DVB T and DVB C you are able to record and play back also depends on the broadcaster E Recording and playback of programmes as well as the time shift function can only be carried out using an external data medium hard drive or USB stick E Recordings can be made with most data media on the market However we cannot guarantee operation for all data media E If a programme was recorded on an external data medium it can only be played back on your television set The playback of these pro grammes is not possible on other devices E f you send your television to be repaired and hardware components need to be replaced you might not be able to play the recordings again on the repaired television E Reception for SKY broadcasting service is cur rently only possible in Germany with a suitable set top box or suitable CA module Grundig does not accept liability for any loss of saved data on an external data medium 50 ENGLISH Possible limitations when using an external data medium Depending on the broadcaster you may experi ence various restrictions on some of the functions from some television channels GRUNDIG has no influence on these restrictions m Recording a programme on the external data medium can be disabled by the bro
114. required mA noisy environment may lower audio quality of the microphone m Skype is deactivated and you cannot receive incoming calls when the TV is turned off m Trade Mark Notification Skype is a trade mark of Skype or its related companies This product application has not been approved or endorsed by Skype Skype Communications S a rl or any of their related companies m Skype IP Notiice This product includes SkypeKit Version 3 7 Copyright 2003 2011 Skype Patents Pending Skype associated trade marks and logos are trade marks of Skype Connecting and settings Connecting Skype Camera Note m Your TV is compatible with GRUNDIG G VCAM 01 camera unit and camera units of other brands are not supported m GRUNDIG G VCAM 01 camera unit is sold individually it is not provided with your TV Please contact your dealer from where you have purchased your TV in order to obtain more information for buying the camera m Before connecting the Skype camera it is recommended to switch the television to stand by mode Install the camera on the top side of the TV 2 Connect the USB cable to USB1 or USB2 HDD to the USB interface of the TV ENGLISH 43 SMART INTER ACTIVE TV 2 0 FUNCTION Creating an Skype account 1 Open the menu Quick Apps with 2 Select the plugged into Skype application with w A and gt and press OK to confirm Main menu of the app
115. ress OK to confirm Enter the IP address with 1 0 and press ee green to save the value Select the line DNS with w and press OK to confirm Enter the DNS address with 1 0 and press ee green to save the value 10 Select the line Netmask with w and 12 13 14 press OK to confirm Enter the Netmask address with 1 0 and press ee green to save the value Select the line Gateway with w and press OK to confirm Enter the Gateway address with 1 0 and press ee green to save the value Select Connect with e red to establish the modem connection Connecting Please wait message will be displayed Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages and MAC address will be displayed Press MENU to end the setting SMART INTER ACTIVE TV 2 0 FUNCTION ___ Smart Inter active TV 2 0 Applikationen Smart Inter ctive TV 2 0 provides your televi sion with Internet applications when connected to Internet Through Smart Inter ctive TV feature you can run many local and global Internet applications GRUNDIG AppLICATION store is a depot where you can find various applications that you may use
116. riteria with e red ee green or eee yellow 3 Quit the program table with MENU Skipping channels You can mark television channels which should be skipped when selecting with A or w It is still possible to select them using the number buttons 1 In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked by 4 Quit the program table with MENU Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK Creating lists of favourites You can save your favourite channels in up to four favourites lists FAV 1 to FAV 4 Notes m Favourites lists must be created separately for all input sources satellite cable air m You can select the favourites list by pressing FAV l In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the channel of your choice with w or AK 3 Push the channel into the favourites lists 1 to 4 with or gt and press OK to confirm The position in the favourites list is marked with You can enter the same channel in more than one favourite list Each favourite list can store up
117. rts to play in USB or PVR mode Open the Select Source menu with gt k Select the source digital channel or suitable input that will be played in 3D with gt W or A and confirm with OK Open 3D menu with 3D button and use or gt to select Side by Side Top Bottom or 2D gt 3D option according to the content to be played and confirm with OK 2D gt 3D Changes 2D picture to 3D Side by Side Displays a picture next to the other one Top Bottom Displays a picture below the other one Frame Packing Right and left images of the TV are displayed alternately Note m Frame Packing appears in the 3D menu only if a video signal is sent to the HDMIk input in HDMI 1 4 format The Side by Side and Top Bottom options do not appear 4 Turn off the 3D function by setting it to Off with 3D and confirm with OK 3D Settings 1 Open the menu with MENU 2 Select the line PICTURE SETTINGS with V or A and confirm with OK The PICTURE SETTINGS menu appears Select 3D SETTINGS with A and confirm with OK The 3D SETTINGS menu is displayed O PICTURE SETTINGS 3D Settings na 3D Mode 3D Effects Note Additional operations are explained in the following sections ENGLISH 29 3D FUNCTION Adjusting 2D gt 3D effects When you change 2D broadcasting t
118. rundig television and 3D glasses can pro m Keep a sufficient distance from the television vide the reality of the cinema when you watch The optimum distance is three times the height of the screen Watching 3D films from a close distance for a long time could impair your vision Never use the 3D function for longer than 3 hours without a break It is essential that you supervise children watching a 3D programme to prevent dam age to their health Children under 6 years should not watch 3D content because their spatial vision is not yet completely developed Do not use the 3D function if you are anx ious sleepy or overtired If you or a member of your family suffers with epilepsy you should consult your doc tor before watching 3D films If when watching a 3D film your vision becomes impaired you feel dizzy or nav seous your eyes hurt you have muscle spasms or have difficulty in concentrating you must stop watching immediately 3D images can startle the viewer We rec ommend that elderly persons pregnant women and persons with serious physical complaints avoid watching 3D content Do not use the 3D glasses for other purpos es for example as sunglasses or protective glasses as this may impair your sight 28 ENGLISH 3D movies in your home This TV uses state of the art LED technology to give you the best experience 3D has to offer To join 3D world you just need to put on the Grundig 3D glasses
119. s ENGLISH _7 CONNECTION AND PREPARATION Connecting the antenna and power cord 1 To receive digital satellite channels DVB S connect the satellite antenna cable to the antenna socket SATELLITE on the televi sion set And or 2a To receive terrestrial digital broadcasters DVB T connect the cable for the rooftop or indoor antenna passive or active indoor antenna with its own power supply to the an tenna socket ANT IN on the television set or 2b To receive digital cable channels DVB C connect the cable for the rooftop antenna to the antenna socket ANT IN on the television set or 2c To receive analogue TV channels connect the cable for the rooftop antenna to the an tenna socket ANT IIN on the television set 8 ENGLISH Note m When connecting an indoor antenna you may have to try it out at different positions until you get the best reception 3 Plug the power cord into a wall socket Note m Do not plug in the power cord of the device until you have connected the external equip ment and the antenna Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord CONNECTION AND PREPARATION Inserting batteries into the Environmental note remote control a This symbol on recharge able batteries batteries or Pb on the packaging indicates that the rechargeable bat tery battery may not be disposed
120. s 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears SOUND SETTINGS Volume 10 L I JR SRS SSHD Balance Sound Mode Sound Type Stereo SRS Sound Preset Speech Night Mode Ojjj External Headphone 20 Audio Output Setup Note m Additional operations are explained in the following sections Volume 1 Select the line Volume with W or A and change the setting with or gt Balance 1 Select the line Balance with w or A and change the setting with or gt 22 ENGLISH Automatic volume Television stations broadcast at different vol umes The automatic volume limiting AVL func tion means the volume is kept the same when you switch between channels 1 Select the line AVL with w or A and select the option On with or gt Note m If the SRS SSHD setting has been selected in the Audio Modes line the AVL line can not be selected Stereo two channel sound mono If the device receives two channel sound pro grammes e g a film with the original soundtrack on audio channel B display Dual Il and the dubbed version on sound channel A dis play Dual I you can select the audio channel you prefer If the device receives stereo or Nicam pro grammes it switches automatically to stereo sound dis
121. s digital television channels from the cable provider on page 17 m Tunes analogue television channels in the chapter Special functions starting on page 85 m Further settings for digital television chan nels after the initial set up can also be found in the chapter Special Settings starting on page 79 Note m Make the language and country selection for all types then continue reading the respective chapter 14 ENGLISH Selecting language country and operating mode 1 Switch on the television set from standby with O 1 0 or P or P During initial set up the Installation Guide will be displayed Help m lf this menu is not displayed restore the television set to its default settings see page 69 2 Select the menu language with gt V or A and press OK to confirm 3 Select the mode with or gt and press OK to confirm The settings used in Home Modex help to save energy Alternatively the menu item Shop Mode can be selected which the retailer can use for demonstrating the device functions Note m End the Shop Mode by restoring the televi sion set to its default settings see page 69 4 Select the country in which the television set is operated with gt W or A and press OK to confirm The Source Setup menu appears with the Connection Typex line marked Note m You can f
122. s level with or D 4 Press MENU lt to end the setting Locking menus This function allows you to lock the Automatic Channel Search Digital Manual Tuning An alogue Manual Tuning and Program Table menus so that they can be only accessed by entering a PIN code 1 Select Menu Lock with W or A 2 Enter the PIN code 1234 with 1 O 3 Activate the lock with or gt On Note m To switch off the menu lock use or gt to select the setting Off 4 Press MENU to end the setting Locking keys Parental lock When the key lock is activated the buttons on the television set do not function 1 Select the line Keypad Lock with w or DAK 2 Enter the PIN code 1234 with 1 O 3 Activate On or deactivate Off the key lock with or Dd 4 Press MENU to end the setting ENGLISH 67 CONVENIENCE FUNCTIONS Changing the PIN code You can also enter a personal PIN code instead of the default code 1234 Please take note of your own PIN code 1 Select Set PIN with w or A and press OK to confirm 2 Enter the current PIN code 1 2 3 4 with T oe O 3 Enter your new four digit PIN code with 1 Ok 4 Enter your new four digit PIN code with 1 O again 5 Press MENU to end the setting Locking television channels You can lock individual television channels
123. shift programmes You can pause the programme you are watch ing This is a useful function for example if the telephone rings while you are watching a film and you do not want to miss anything A freeze frame display of the last scene appears on the screen and the programme is recorded in the time shift memory of the external data medium In time shift mode you can record a maximum of 60 minutes of the current programme 1 Press fll to pause the current programme The picture is frozen the time shift and the remaining recording time are displayed 2 Press gt to resume the programme The programme will continue to be recorded Note m The following functions are possible when in time shift mode Rewind press 44 several times accord ing to speed the picture freezes while rewinding Fast forward press P several times according to speed Select pause with Iii 3 Press fill to quit the time shift function The message Live programmex appears and you will see the current programme without time shift The scenes in the time shift memory are deleted Recording programmes You can record programmes The data for these programmes is recorded on an external data medium and this archive is administered via the television You need 44 MB till 110 MB of memory capacity on the external data medium for 1 minute recording time While recording you can watch another pr
124. signal at the AV2 and AV1 S VHS socket at the same time This could lead to picture disturbances 74 ENGLISH Using a DVD player DVD recorder video recorder or set top box 1 Switch on the external device and select the function you wish to use 2 Press af gt K Use V A or gt to select the preset for the input signal AV1 AV2 S VHS HDMI1 HDMI2 HDMI3 HDMI4 or Component and press OK lt to confirm Headphones Connecting the headphones 1 Plug the headphone jack 3 5 mm jack plug into the headphone socket on the tel evision Changing the headphone volume 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with w or A and press OK to confirm The SOUND SETTINGS menu appears 4 Select the line Headphone with v or Ax 5 Set the preferred volume with and gt Press MENUs to end the setting Note E Prolonged listening with headphones at loud volumes can damage your hearing OPERATION USING EXTERNAL DEVICES__ Hi fi System Connecting digital multi channel amplifier AV receiver With this connection you can playback the audio signal of the television channel via the HDMI cable sur the multi channel amplifier or the AV receiver 1 Connect the HDMI2 ARC HDMI Audio Return Channel socket to the relevant socket on the HDMI ARC compliant Digital multichannel amp
125. st or to cancel the setting select the push button Cancel with or gt and press OK to confirm Making a call with Skype You can make audio and video calls with differ ent methods Making a call from Skype contact list 1 Select the option Contact List with w or A and press gt to confirm The Contact list will be displayed Select the contact you want to contact with W or A and press OK lt to confirm Contact to be called will be displayed To make a video call use or gt to select Video Call option and press OK to confirm or to make an audio call use or gt to select Voice Call option and press OK to confirm Making a call from the Skype call history 1 3 Select the option History with W or A and press gt to confirm The History will be displayed Select the contact you want to contact with V or A and press OK to confirm Contact to be called will be displayed To make a video call use or gt to select Video Call option and press OK to confirm or to make an audio call use or gt to select Voice Call option and press OK to confirm ENGLISH 45 SMART INTER ACTIVE TV 2 0 FUNCTION Making a call with a phone number Skype Credit or a subscription is required to make a call by phone number 1
126. t Mode Oya 50H 50V Size 0 30 Position Options Auto Ajust for automatic PC configura tion Auto Ajust Mode select the option On if the configuration should be imple mented automatically in PC mode Position to configure the horizontal and vertical picture position Size to set the cycle frequency Phase to eliminate flicker unfocused pictures or horizontal interference Press MENU to end the setting ENGLISH 77 OPERATION WITH A COMMON INTERFACE What is a Common Interface m Common Interface Cl is an interface for DVB receivers m Encrypted channels can only be viewed with a CA module suitable for the encryp tion system and in conjunction with the corresponding smart card m The television set is equipped with a Com mon Interface slot into which Cl modules from various providers can be inserted m You can insert the provider s smart card into the CA module in order to enable the en crypted channels you wish to view Inserting the CA module Note m Switch the device off before you insert a CA module into the Cl slot 1 Insert the corresponding smart card into the Cl module 2 Insert the Cl module with the smart card into the Cl slot on the television Note m In the CA Module submenu you can see which CA module has been inserted in the Cl slot m If you are inserting a CA module into the Cl slot of the television for the first
127. t listed in the window from Media Sharing menu s Settings option you can select the option Allow new devices and computers automatically in the pop up menu After completing these processes the television can only view the supported file formats in the Library In order not to encounter any problems with media sharing check the firewall settings of your modem and computer as ENGLISH Selecting the Digital Media Server 1 2 3 Open the Select Source menu with f gt K Select DLNA with V A lt or gt and confirm with OK DLNA menu is displayed Press BLUE key to search DI Press eeee blue to discover DMS devices on home network DMS devices that are discovered appears in the menu Note mlf no DMS device appears check the network connection See page 31 or 34 You can select the DMS device you want with W A or gt and see its content with OK The content appears Notes E File and folder structure of the DMS device in menu may vary depending on the Digital Media Server software in use m Subtitles are not supported on video files that are played through the DMS device m Video files played through DMS device support following formats that have obtained DLNA certificate MPEG_PS_ NTSC MPEG_PS_PAL MPEG_TS_ SD_EU and MPEG_TS_EU_ISO m In videos with high bit rate lag problem might be seen
128. to 250 channels ENGLISH 19 SETTINGS Notes m Channels can also be deleted from the favourites lists Select the channel to be deleted with v A or gt and press OK to delete it m When deleting a channel from the favourites list the order within the favourites list will be updated 4 Quit the program table with MENU Sorting channels in the favourite list You can change the order of channels in the favourites list 1 In the PROGRAM TABLE menu select the favourites list 1 to 4 2 Select the channel which should be moved with W A or gt and mark it with e red 3 Move the channel to its new position with V A or gt and press OK to confirm Notes m Repeat steps 2 and 3 if you would like to change other channels within the same favourites list m Repeat steps 1 to 3 if you would like to change channels in a different favourites list 4 Exit the current favourites list with eeee blue The entire programe table will appear again 5 Quit the program table with MENU 20 ENGLISH Enter own names for the favourites lists max 6 characters You can enter own names for all favourites lists 1 Inthe PROGRAM TABLE menu switch over to the list view with e e e yellow 2 Select the desired favourites list with 1 till 4 The Favorite Name screen is displayed 3 Delete the old
129. ts the channels according to the information provided by your cable provide in the transmission signal If the option Full is selected the entire fre quency range will be scanned The search can take a long time with this option This option is recommended if your cable pro vider does not support the search type Quick SPECIAL SETTINGS Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet For example the frequency 402MHz and network ID 61441 can be entered for Germany 7 Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLEx appears Note m You can abort the search by pressing MENU 8 Press MENU to end the setting Searching for television channels from the cable provider manu ally 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line S
130. tting Note m f you do not have a dynamic network follow the instructions in manual connection section NETWORK INSTALLATION Manual connection Certain networks require Static IP address If your network requires a Static IP address you must enter the IP Address Netmask Gate way and DNS values manually You can ob tain your IP Address Netmask Gateway and DNS values from your Internet Service Provider ISP 1 2 5 Open the menu with MENU Select menu item INTER CTIVE TV with V or A and press OK to confirm INTER CTIVE TV menu is displayed Select the line Connection Type with w or A and select Wired with gt Select the line Network Configuration with V or A and select Manual with gt IP Address DNS Netmask and Gateway and options are active deh INTER CTIVE TV Inter ctive Applications ox dh Connection Type Cable ES Network Settings Manual IP Address 10 134 151 15 DNS 10 134 150 8 P Netmask 255 255 255 0 Gateway 10 134 151 254 gt ET DF BF 92 00 11 YR MAC Address Select the line IP Address with w and press OK to confirm Enter the IP address with 1 0 and press ee green to save the value 6 Select the line DNS with w and press OK to confirm Enter the DNS address with 1 0 and press ee gree
131. ttings Making a call with Skype Skype status Skype options Updating Skype application The application BABYWATCH MULTI MEDIA SERVER MODE Playing the video music and image files with home network connection USB RECORDING Information on recording and playing television programmes Possible limitations when using an external data medium Connecting external data media Settings for USB recording Pausing time shift programmes Recording programmes Presetting programmes to be recorded Playback Deleting programmes in the recording list USB OPERATION File formats Connecting external data media Removing the external data media The file browser Settings in the USB setup menu Basic playback functions Additional playback functions TELETEXT OPERATION TOP text or FLOF text mode Additional functions INTERACTIVE PORTAL HBBTV What is HbbTV2 Additional functions for video sequences CONTENTS 78 78 78 CONVENIENCE FUNCTIONS Opening the SETTINGS menu Language settings Setting the date and time Timer functions Parental control settings Updating software OAD Updating software Online Restoring the television to the default settings OPERATION USING EXTERNAL DEVICES DIGI LINK The DIGI LINK functions on your television Device operation High definition HD ready Connection options Connecting external devices Using a DVD player DVD recorder video recorder or settop box Headphones Hi fi System
132. vate the audio output Line Out 5 Select the line Audio Out Status with w or A and select the option Fixed or Ad justable with or gt Notes m If you select Adjustable the volume can be changed in the menu option Audio Out Volumex If the audio should only be output via the HiFi system AV receiver select the option Off in the line TV Speaker with or gt 6 Press MENU to end the setting 76 ENGLISH OPERATION AS A PC MONITOR Connecting a PC 1 Connect the PC IN socket on the television to the corresponding socket on the PC using a VGA cable video signal Connect the Audiox socket on the televi sion to the corresponding socket on the PC using a suitable cable audio signal Note m Adjust your PC to the monitor for example picture resolution 1280 x 768 picture fre quency 60 Hz Selecting presets for the PC 1 Press om K and use V A or gt to select the preset PC and press OK to confirm Settings for PC mode 1 2 Open the menu with MENU Select the line SOURCE SETUP item with V or A and press OK to confirm The SOURCE SETUP menu appears Select the function or setting with w or A and then use V A or gt to implement it PC SOURCE SETUP Source Co mene Auto Auto Ajust sd Exte Auto Ajus
133. view If this function is switched on a preview of the selected file then appears in the file browser 1 Select the line Auto Preview with w or 2 Switch on the function with or gt Ong Note m Viewing mode can not be change while 3D mode is active 3 Press MENU to end the setting Selecting the display mode 1 Select View Mode with w or A 2 Select the preferred option with or gt 3 Press MENU to end the setting Setting the display duration for pictures in a slideshow 1 Select Slide Show Interval with w or A 2 Selectthe display duration 3 5 10 seconds with or gt 3 Press MENU to end the setting ENGLISH 59 USB OPERATION DivX VOD You must have your device registered in order to play the protected video that you will buy from DivX 1 Select DivX VOD with w or A and confirm with OK Registration Code appears 2 Visit http vod divx com and register the device with the registration code 3 Press MENU to end the setting Di WX ae DivX Certified to play DivX and DivX Plus HD H 264 MKYV video up to HD 1080p HD including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX v
134. wish to receive digital television chan nels via your cable system DVB C the an tenna cable for your cable operator must be connected to the television set Unlike analogue broadcasting not every channel has its own transmission frequency Instead several channels are grouped into what are known as bouquets on a regional or national level You can find the current trans mission information on teletext from various broadcasters or by consulting a current TV guide or the Internet Various digital television channels from private broadcasters are encrypted DVB S DVB T and DVB C Watching these channels and the recording and playback functions are only possible with the appropriate Cl module and a SmartCard Ask your specialist dealer The range of channels available from the pub lic broadcasting institutions ARD with EinsEx tra EinsFestival or ZDF with ZDF Info and all third party broadcasters are not encrypted and can be received without a SmartCard Grundig SCR system m Your TV supports SCR system Satellite Channel Router If your antenna installation is equipped with an Single Cable Distribution multiswitch all television sets which are connected on this antenna can receive the television channels stand alone Important notes on environmental protection m The following information will help you to save resources and money as well m f you are not using your television set for several days you should pul
135. ximum mean e i r p density is 10 mW MHz Maximum 100 mW e i r p Indoor ap plications For customers in Ukraine e i r p 100 mW with builtin antenna with am plification factor up to 6 dBi Environmental note This product has been made ae from high quality parts and materials which can be re used N and recycled Therefore do not dispose of the product along with normal household waste at the end of its service life Take it to a collection point for the recycling of electrical and electronic equipment Dispose of the used device at a collection point for electrical and electronic equipment The sym bol on the product in the operating manual or on the packaging indicates that recycling is possible Information on collection points is available from your local authorities Help protect the environment by recycling used products ENGLISH 91 INFORMATION Troubleshooting If the information provided below does not help please consult an authorised GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers Screen lit snow but no station Antenna cable Is the antenna cable connected visible No TV channel tuned Start a channel scan Insufficient contrast in picture The picture settings are not correct Adjust the brightness contrast or colour setting Problem at station Try another channel Picture and or sound distorted Interference from
136. y your phone after downloading the free GRUNDIG TV Remote application from Apple App Store or Google Play Android Market and install it on the Apple iPhone Android phone ENGLISH 13 SETTINGS Initial set up and tuning television channels The television set is equipped with automatic channel search which searches for satellite channels DVB S terrestrial channels DVB T cable channels DVB C and analogue channels You start the search and the television channels will be stored into the Program Table Following you can sort the satellite channels DVB S in the Program Table The sorting of terrestrial channels DVB T cable channels DVB C and analogue channels is only possible in the favourite list For DVB S channels there are 6000 presets available for DVB T and DVB C channels 1000 presets and 99 presets for analogue channels The various settings Depending on the type of antenna connected you can decide which channels you would like the television to search for m Tunes digital television channels from the satel lite from page 15 You have two options for this search the basic installation which presets a stand ard selection e g the satellite Astra 19 2 East you need only start the search the professional installation which allows you to make all required settings and set pa rameters for your receiver system m Tunes digital terrestrial television channels on page 17 m Tune

Grundig 47 VLE 9474 BL 47" Full HD 3D compatibility Smart TV Wi-Fi Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Grundig 47 VLE 9474 BL 47&quot; Full HD 3D compatibility Smart TV Wi-Fi Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Grundig 47 VLE 9474 BL 47" Full HD 3D compatibility Smart TV Wi-Fi Black