Home

Grundig 40 VLE 5421 BG 40" Full HD Black

1. 2 Open the menu with MENU 3 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Note m Additional functions are explained in the following sections Switching on automatic preview If this function is switched on a preview of the selected file then appears in the file browser 1 Select the line Auto Preview with w or A 2 Switch on the function with or gt On 3 Press EXIT to end the setting Selecting the display mode 1 Select View Mode with w or A 2 Select the preferred option with or gt 3 Press EXIT to end the setting Setting the display duration for pictures in a slideshow 1 Select Slide Show Interval with w or A 2 Selectthe display duration 3 5 10 seconds with or Dd 3 Press EXIT to end the setting ENGLISH 37 USB OPERATION DivX VOD You must have your device registered in order to play the protected video that you will buy from DivX 1 Select DivX VOD with w or A and confirm with OK Registration Code appears 2 Visit http vod divx com and register the device with the registration code 3 Press MENU to end the setting Di WX he DivX Certified to play DivX and DivX Plus HD H 264 MKY video up to HD 1080p HD including premium content ABOUT DIVX VIDEO DivX is a digit
2. Connection Type Satellite Operator Selection Other Select Satellite ASTRA 19 2 E Free Scramble Scan Mode Service Type Network Search 9 Select the line Scan Mode with w or A Select the scan mode with or gt for unencrypted channels for encrypted channels only or for both 10 Select the line Service Type with w or A Use or gt to select whether you want to search for television channels only TV radio stations only Radio or both Radio TV 16 ENGLISH Note E t is possible that some TV channels tran sponders cannot be found This is caused by a change in satellite parameters made by the broadcaster e g new channels have been added Set the Network Search op tion to On 11 Start the scan with e red The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note m You can abort the scan by pressing EXIT 12 Press EXIT to end the setting Note E If other television channels are to be tuned from a second satellite proceed as follows Open the menu with MENU select the line SOURCE SETUP with w or A and press OK to confirm Then select the Automatic Channel Search with w or A and press OK
3. ANTENNA SETTINGS Satellite ASTRA 19 2 E Transponder 11362 MHz H LNB Type LNB Power 0i Universal DISEqC Mode Off LNB Selection Off Poor Normal Good Quality 0 Signal strength oa JN Exit mes 3 Select the line Satellite with w or A and press OK to confirm The SELECT SATELLITE menu appears Select the satellites with v A or gt and press OK to confirm Note m The setting in the line Transponder is not required for this automatic scan 4 Select the line LNB Power with w or DAK Depending on the type of LNB set the LNB power supply to 13 18 V or 14 19 V with or gt 5 Select the line LNB Type with w or A Select the type of LNB installed with or gt ENGLISH 15 SETTINGS Select the line DISEqC Mode with w or A Select DiSEqC 1 0 or DiSEqC 1 1 in accordance with the existing antenna system with or gt DiSEqC 1 0 allows up to four satellites to be received simultaneously DiSEqC 1 1 allows up to 16 satellites to be received simultaneously Select the line LNB Selection with w or DA lt Select the setting for the respective satellites with or gt Once the settings for the satellite have been made switch to the AUTOMATIC CHAN NEL SEARCH menu with red Si SETUP l Q AUTOMATIC CHANNEL SEARCH
4. Switches on and off Standby Switches between teletext and TV mode Exit the menu Zapping function switches back one menu level in the menus Opens the electronic TV guide Opens menu for AV channels Then select using v gt or A and press OK to confirm Switches on from standby Selects channel in steps Select the preset for an exter nal data media Switches between TV and Radio channel only for digital television chan nels OVERVIEW The remote control All functions red green Selects pages in teletext Selects activates various functions yellow in the menus ccoo blue 4 gt 44 b gt Switches to double character size in teletext selects the previous title previous picture in the file browser Refreshes a teletext page selects the next track next picture in the file browser Stops scrolling through pages in teletext starts a fast reverse search in the file browser Reveals answers in teletext starts a fast forward search in the file browser Starts the recording only for digi tal television channels the record ing is made on an external data medium Starts playing a programme from an external data medium repeats a recorded programme Freeze frame if no external data medium is connected playback pause time shift mode only for digital television channels and when an external da
5. A enter the data for Date and Time with 1 0 and press OK to confirm Manual setting You can also set the difference in time manually for example when the correct time is not de tected automatically or does not correspond to local time for other reasons 1 Select the line Time Adjustment with w then select the option Manual with or gt The lines Time Zone and Daylight Sav ing are active 2 Select the line Time Zone with w and press OK to confirm The Select Time Zone menu appears 3 Select the appropriate time zone with gt V or A and press OK to con firm 4 Select the line Daylight Saving with w and use or gt to set the option Autox Off or On 5 Press EXIT to finish the setting Note m f the option Auto is selected in the line Time Adjustment the television set auto matically adapts the time to the time signal from the respective broadcaster However different channels may also use time bases which are different to those of your country e g foreign broadcasters In these cases reminders and planned recordings may be annulled due to the time difference Timer functions Entering the switch off time sleep timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mo
6. Note m To switch off the menu lock use or gt to select the setting Off 4 Press EXIT to end the setting CONVENIENCE FUNCTIONS Locking keys Parental lock When the key lock is activated the buttons on the television set do not function 1 Select the line Keypad Lock with w or A 2 Enter the PIN code 1234 with 1 O 3 Activate On or deactivate Off the key lock with or gt 4 Press EXIT to end the setting Changing the PIN code You can also enter a personal PIN code instead of the default code 1234 Please take note of your own PIN code 1 Select Set PIN with w or A and press OK to confirm 2 Enter the current PIN code 1 2 3 4 with T oe O 3 Enter your new four digit PIN code with T Ok 4 Enter your new four digit PIN code with 1 O again 5 Press EXIT to end the setting Locking television channels You can lock individual television channels for example channels unsuitable for children using a personal PIN code 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm 3 Select the line Program Table with w or A and press OK to confirm The PROGRAM TABLE menu is dis played 4 In the PROGRAM TABLE menu switch over to the list view with eee yellow 5 Select the channel to be locked with
7. The SOURCE SETUP menu appears 3 Select the line Digital Manual Tuning with W or A and press OK to confirm The menu appears 4 Select the line required for the parameters with W or A Frequency MHz Enter the five digit frequency with 1 O Symbol Rate kS s Enter the five digit symbol rate with 1 O Polarization Use or gt to set the polarisation to Horizontal or Vertical Network Search use or gt to se lect the option On or Offe Scan Mode Use or gt to select whether you want to search for unencrypt ed Unencrypted channels only encrypt ed Encrypted channels only or for both Unencrypted Encrypted Service Type Use or gt to select whether you want to search for television channels only TV radio stations only Radio or both Radio TV 5 Start the scan with e red The Results menu appears and the scan for TV channels begins Note m You can abort the search by pressing EXIT 6 Press EXIT to end the setting 56 ENGLISH LNB settings Notes m The following description about the LNB settings premise a substantial expertise about the satellite systems Ask your specialist dealer m Your TV supports SCR system Satellite Channel Router If you are using SCR satellite system follow the steps described in LNB
8. There are films which may be wholly or partially unsuitable for children These programmes contain information which marks the content or scenes with access levels of 4 to 18 You can select one of the access levels thereby authorising playback 1 Select the line Parental Guidance with W or A and press OK to confirm 2 Enter the PIN code 1234 with 1 O 3 Select the access level with or gt 4 Press EXIT to end the setting Note m When the TV is in review buffer mode the parental rating of the program in the live broadcast is applied on the content being watched rather than the actual parental rating of the content being watched As a result a parental rated content being watched in the review buffer mode will not necessarily show as parental rated and vice versa This means that if parental rated program starts in live broadcast the PIN pop up message will appear in review buffer or the PIN pop up message will be dismissed in review buffer as soon as a program without parental rating starts in live broadcast Locking menus This function allows you to lock the Automatic Channel Search Digital Manual Tuning An alogue Manual Tuning and Program Table menus so that they can be only accessed by entering a PIN code 1 Select Menu Lock with W or A 2 Enter the PIN code 1234 with 1 O 3 Activate the lock with or gt On
9. or A and press OK to confirm Information on the data medium is dis played 4 Press EXIT to end the setting USB RECORDING Pausing time shift programmes You can pause the programme you are watch ing This is a useful function for example if the telephone rings while you are watching a film and you do not want to miss anything A freeze frame display of the last scene appears on the screen and the programme is recorded in the time shift memory of the external data medium 1 Press jll to pause the current programme The picture is frozen the time shift and the remaining recording time are displayed 2 Press gt to resume the programme The programme will continue to be recorded Note m The following functions are possible when in time shift mode Rewind press 44 several times accord ing to speed the picture freezes while rewinding Fast forward press several times according to speed Select pause with Iii 3 Press fill to quit the time shift function The message Live programme appears and you will see the current programme without time shift The scenes in the time shift memory are deleted Recording programmes You can record programmes The data for these programmes is recorded on an external data medium and this archive is administered via the television You need 44 MB till 110 MB of memory capacity on the ext
10. or A and press OK to confirm The PROGRAME TABLE menu appears Note Additional operations are explained in the following sections Deleting channels 1 In the PROGRAME TABLE menu select the television channel to be deleted with w A or gt and press e red to con firm 2 Delete the selected channel by pressing eee yellow Note E eeee blue allows all television channels to be deleted 3 Press ee green to confirm the deletion process Entering channel names 8 digit maximum 1 In the PROGRAME TABLE menu select the television channel with v A or gt and press e red to confirm 2 Open the input keyboard with ee green Note m f necessary delete the current channel name To do this select the lt button with or gt and delete repeatedly using OK 3 Select the required letters or numbers with V A or gt and confirm with OK Repeat the entry for further letters numbers Note m Use the ABC button to switch to upper case letters and use the 123 button to switch to symbols and numbers 4 Save the channel name by using V A or gt to select Submit and confirm with OK Note m If you wish to enter other channel names repeat steps 1 to 4 Skipping television channels You can highlight television channe
11. Otherwise no subtitles will be shown Additional playback functions Depending on the file format the following additional functions are available Selecting chapters on DivX files only video files 1 During playback select the next chapter with gt 2 During playback select the previous chapter with Note m You can also select chapters by entering the chapter number with 1 0 Selecting titles on DivX files only video files 1 During playback select the next title with DAK 2 During playback select the previous title with w Playing selected titles Only the marked tracks are played 1 Select the titles with v or A and press OK to mark it 2 Select the next title with w or A and press OK to mark it 3 Start playback with P gt 4 Press lll to end playback Note m To remove the marking select the title with V or A and press OK to remove the marking ENGLISH 39 USB OPERATION Selecting a track or picture in steps SKIP 1 During playback select the next track picture with P 2 During playback select the previous track picture with Playback begins with the track or picture you selected Selecting a certain passage for playback video files only 1 During playback press OK 2 Enter the passage time with 1 O and press ee green or OK to confirm Fast forward
12. Select Device Standby with v or A and press OK to confirm The external device switches itself off OPERATION USING EXTERNAL DEVICES High definition HD ready Connect the corre HD sponding input sources e g HDTV receiver or HD DVD player to the HDMI sockets for digital HDTV sources This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Bandwidth Digital Content Protec tion without encountering problems Connection options m Which television socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available m Please note With many external devices the resolution of the video signal must be adjusted to the input sockets of the television see the operating manual of the external device You can find out which values you need to set by referring to the guidelines in the sections about the various connection options Do not connect any other equipment while the device is switched on Also switch off the other equipment before connecting it Do not plug in the power cord of the device until you have connected the external equip ment and the antenna ENGLISH 49 OPERATION USING EXTERNAL DEVICES__ Connecting external devices With digital audio video signals m Suitable devices Digital satellite receivers Playstation BluR
13. The unit must be located in stand by mode Open the menu with MENU 2 Select the menu item SOURCE SETUP with W or A and press OK to confirm 3 Select the line Automatic Service Update with W or A 4 Select the automatic update with or gt On 5 Press EXIT to end setting SPECIAL SETTINGS Searching for digital terrestrial TV channels manually 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm Caution m The antenna power supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna 4 Select the Active Antenna Power with V or A Switch on the antenna pow er supply for the antenna with or gt On 5 Select Digital Manual Tuning with w or A and press OK to confirm The menu appears 6 Enter the channel number directly with 1 e O After the search is complete the channels found are displayed in the
14. menu appears Select the menu item Audio Output Setup with W or A and press OK to confirm The Audio Output Setup menu appears Select the line Headphone with w or A Set the preferred volume with and gt Press EXIT to end the setting Note m Prolonged listening with headphones at loud volumes can damage your hearing ENGLISH 51 OPERATION USING EXTERNAL DEVICES__ Hi fi system AV receiver Connecting the hi fi system AV receiver 1 Connect the Optic Out socket on the television to the corresponding socket of the device with an optical digital cable digital audio signal Setting the audio format You can select whether the audio signal output via the Optic Out socket should be in the PCM or AC2 format 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select Audio Output Setup with w or A and press OK to confirm The menu appears 4 Select the Optic Out with W or A 5 Select the preferred audio format PCM or Auto with or gt d Note m If you wish to output the audio only via a multi channel amplifier AV receiver set the option TV Speaker to Off in the menu 6 Press EXIT to end the setting Manufactured under license from Dolby Laboratories Dolby and the doub
15. tion system and in conjunction with the corresponding smart card m The television set is equipped with a Com mon Interface slot into which Cl modules from various providers can be inserted m You can insert the provider s smart card into the CA module in order to enable the en crypted channels you wish to view Inserting the CA module Note m Switch the device off before you insert a CA module into the Cl slot 1 Insert the corresponding smart card into the Cl module 2 Insert the Cl module with the smart card into the Cl slot on the television Note m n the CA Module submenu you can see which CA module has been inserted in the Cl slot m If you are inserting a CA module into the Cl slot of the television for the first time you will need to wait a moment until the CA module is detected 54 ENGLISH Access control for CI module and smart card 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line CA Module with w or A and press OK to confirm Notes m This menu provides operating instructions and after you enter your PIN code ac cess to the PAY TV provider s channels m The remaining settings are described in the operating manuals for your Cl module and smart card m The CA modul is not supported in certain countries and regions please consult you
16. w or A 6 Select the column Lock with or gt and press OK to lock the channel 7 Enter the PIN code 1234 with 1 O The channel is marked using Note m To remove the lock select the channel again with W or A press OK to confirm and then enter the PIN code 1 2 3 4 using I se Ok 8 Press EXIT to end the setting Watching a blocked television channel You can watch a TV channel blocked with PIN code by selecting the TV channel and entering the PIN code 1 Select the blocked channel with 1 0 or P P 2 Open the menu with MENU 3 Select the menu item SETTINGS with w or A and press OK to confirm 4 Select the line Open Channel Lock with V or A and press OK to confirm 5 Enter PIN code 1234 with 1 O buttons on the displayed password screen Blocked channel can be viewed Note Channel will be blocked again when you change the channel ENGLISH 45 CONVENIENCE FUNCTIONS Updating software for digital channels only 1 In the SETTINGS menu select the line Check For Updates updates with w or A and press OK to confirm A search for new software will be made and if available it will be installed Note m If a search for software updates should be made automatically select the line Auto matic OAD with w or A and use or gt to
17. with W or A and press OK to confirm entering the channel numbers 1 Open the menu with MENU TS CN SOURECE SETUP 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Source i 7 3 Select the line Analogue Manual Tuning Automativ Channel Search with V or A and press OK to confirm Digital Manual Tuning The menu appears Analogue Manual Tuning N INSTALLATION 2 ANALOGUE MANUAL TUNING Program Table Signal Information Automatic Service Update a CA Modul Notinserted TSystem Active Antenna Power Ojjj Band Channel Fine Tuning 5 Select the line Scan Typ with W or A and set the option ATV with or gt 6 Start the scan with e red Note 4 Select the line Program Nox by pressing v m After starting the scan a security query will or A and use or gt to save the preset appear Press ee green to confirm the 5 option Yes All channel and favourites lists for the ana logue channels will be deleted and com piled anew 6 Select the line Channel with w or A The Results menu appears and the scan and enter the channel number with or gt for TV channels begins Depending on the T by an ch 1 0 to enter the chan eh nel number directly or number of television channels received start a automatic scan wi
18. yellow or sort digital television channels from the cable provider with eeee blue 3 Quit the program table with EXIT Skipping channels You can mark television channels which should be skipped when selecting with A or w It is still possible to select them using the number buttons l In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked by 4 Quit the program table with EXIT Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK Creating lists of favourites You can save your favourite channels in up to four favourites lists FAV 1 to FAV 4 Notes m Favourites lists must be created separately for all input sources satellite cable air m You can select the favourites list by pressing FAV 1 In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the channel of your choice with w or A ENGLISH 19 SETTINGS 3 Push the channel into the favourites lists 1 to 4 with or gt and press OK to confirm The position in the favourites list is marked with You can enter the same channel in more tha
19. 1 0 or P or P to switch on the television from standby mode Connect the USB1 socket of the television and the corresponding socket on the data device external hard drive digital camera card reader or MP3 player using a USB ca ble or insert the USB plug of the USB memory stick into the USB2 socket of the television set Removing the external data media Before removing the external data medium log off the data medium 1 2 Open the menu with MENU Select the menu item USB with W or A and press OK to confirm Select the line Safely Remove Disk with V or A and press OK to confirm Note m The data medium can now be removed from the socket USB OPERATION The file browser The file browser displays video audio and picture files stored on external data media If an external data medium contains files in different formats you can when necessary filter out the formats not required Main menu of the file browser 19 10 28 06 2010 VIDEO FILES QO ROOT Ta Music a Film Selected data format Name of the data medium Total number of folders on the data medium Preview of the selected file Information on the external data medium oath oN Menu navigation Settings in the USB setup menu Selecting the menu 1 Press mhp x use W A or gt to select the preset USB and press OK to confirm
20. 1 0 to switch back to the television channel Adjusting the volume 1 Adjust the volume with ail Switching sound on off 1 Press 5Q to mute the sound or switch it on again Displaying information 1 Display information press repeatedly The display disappears automatically after a short while Freeze frame If you wish to view a particular scene for longer you can freeze the frame of the current pro gramme 1 Activate the freeze frame function with Ii 2 End the freeze frame function with Note m lf an external data medium is connected to the television the time shift function is activated with Il The time shift function is described on page 31 Picture settings Various picture settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Picture Mode with W or A 3 Select the picture setting by pressing or gt You can change the User picture setting see Picture settings on page 21 Note m Picture setting Gamex can only be selected in HDMI Component and PC modes TELEVISION OPERATION Audio settings Various audio settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Sound Preset with DW or A 3 Select the audio setting by pressing or gt You can change the User audio setting see the Soundeffects
21. 2 Open the menu with MENU Select the menu item SOURCE SETUP with W or A and press OK to confirm Select the line Signal Information with W or A and press OK to confirm Information on the channel network modulation symbol rate quality and signal strength is displayed Notes m The signal information changes in accord ance with the current input source The signal properties are displayed in the lower section of the menu The further the bars for Quality and Signal Strenght extend to the right the better the reception signal The signal level not only depends on your receiver system but also on the channel which is currently active Remember this when aligning your antenna based upon the signal level display Press EXIT to close the menu INFORMATION Product Fiche GRUNDIG 40 VLE 5421 BG Energy Efficiency class Screen size 102 cm 40 inch Power consumption On mode 63 W 80 W max Annual power consumption 92 kWh Stand by power consumption lt 0 50 W Maximum resolution WUXGA 1920 x 1080 Other information Operating voltage Input 220 240 V 50 60 Hz Screen dm2 44 dm Audio output 2 x 20 W music power output 2 x 10 W Sine wave power Rohs Limits Pb Lead Hg Mercury Pb meets ROHS directive O mg Peak luminance ratio 65 Default satellite 20 LNB power supply 13 18 V 14 19 V optional maximum 500 mA LNB swi
22. TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note m You can abort the scan by pressing EXIT 5 Press EXIT to end the setting Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 64 If the level is displayed in green you can record HD channels without any problems Tuning television channels from the cable provider DVB C 1 5 In the Source Setup menu in the Connec tion Type line select the option Cable with or gt d Select the line Scan Type with w or A Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Select the line Cabel Scan Type with w or A Select the preferred option Quick or Full with or gt The search function Quick sets up the channels according to the information pro vided by your cable provider in the trans mission signal If the option Full is selected the entire frequency range will be scanned The search can take a long time with this op tion This option is recommended if your cable provider does not supp
23. TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note m You can abort the search by pressing EXIT 8 Press EXIT to end the setting Searching for television channels from the cable provider manu ally 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Cable with gt W or A and press OK to confirm 4 Select Digital Manual Tuning with w or A and press OK to confirm The menu appears 5 Enter the four digit frequency with 1 O The search starts after confirming the channels found are displayed in the Re sults menu 6 Press EXIT to finish the setting ENGLISH 59 SPECIAL SETTINGS Searching for digital terrestrial TV channels automatically 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with w or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm Caution m The antenna power
24. Typex section Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Antenna Settings with w or A and press OK to confirm The ANTENNA SETTINGS menu ap pears Select the line required for the parameters with W or A Satellite Press OK select a satellite with gt W or A and press OK to confirm Transponder Press OK select a tran sponder with gt W or A and press OK to confirm Use e red to add a transponder use e green to delete it or use eee yellow to change transponder data LNB Power Set the LNB power supply depending on the type of LNB to Off 13 18 V or 14 19 V with or gt LNB Typex Select the LNB type used in the satellite system with or gt If you are using a satellite antenna with an Single Cable Distribution multiswitch select the setting Grundig SCR After it please perform the User Band KB Frequency and LNB Selection settings in the submenus The necessary parameters you will get from the operator of the satellite antenna Use only this specification LNB Selection If more than one satellites are used in the current SCR system select 1 2 to 2 2 lt for the satellite corresponding to the rele
25. and BMP JPEG stands for Joint Picture Experts Group It denotes a process for compressing picture files PNG and BMP are process used to save image data with no or very little losses Picture files can be stored with other types of files on one medium These files can be organised into folders and subfolders ENGLISH 35 USB OPERATION Connecting external data media Before connecting the external data medium it is recommended to switch the television to stand by mode Before removing the external data medium the television set must be switched to standby so that no data loss occurs Notes m The USB2 socket of the television set supplies a maximum power of 500 mA in accordance with USB specifications Exter nal hard disks which require more power may therefore only be connected to the USB 1k of the television set m If you use a network cable for external hard disks which are connected to the USB1 socket on the television this network cable must also be disconnected from the power supply when the television is switched off m External data media may not be disconnect ed from the television set while files on the data medium are being accessed m A bidirectional data transfer as defined for ITE Information Technology Equipment devices in EN 55022 EN 55024 is not possible m USB transfer is not in itself an operating mode It is only an additional function 36 ENGLISH Press
26. and secondary language is display at the top right in the menu 3 Press EXIT to end the setting Changing the subtitle language and subtitle mode only for digital television channels You can switch the subtitles on and off select the subtitle language and allocate a second subtitle language 1 Select the line Subtitle with v or A and press OK to confirm The Select Subtitle Language menu ap pears 2 Select the subtitle language with w A or gt then use e red to set it as the primary subtitle language or use ee green to set it as the secondary subti tle language The primary and secondary language is displayed at the top right in the menu oa To go back one menu level press 4 4 Select the line Subtitle Mode with w or A and then set the preferred option Off Hard of Hearing or Basic with or gt 5 Press EXIT to end the setting CONVENIENCE FUNCTIONS Setting the date and time Automatic setting Your television set detects the difference in time to Greenwich Mean Time GMT automatically as long as the channel selected transmits a time signal 1 Select the line Date amp Time with w or A and press OK to confirm 2 Select the line Auto with w or A and press OK to confirm Date and Time will be updated automatically or 3 Select the input box with w or
27. chapter on page 22 Note m User option is active when Sound mode setting is selected as Normal or Spatial Audio language Various languages are available on digital tele vision channels This depends on the programme being broadcast 1 Open the selection menu with 2 2 Select the language by pressing W or A and press OK to confirm Subtitles Various subtitles are available on digital televi sion channels This depends on the programme being broadcast 1 Open the selection menu with Sk 2 Select the subtitles with w or A and press OK to confirm Zoom function This function allows you to enlarge the picture as required 1 Open the Tools menu with TOOLS 2 Select the menu item Zoom with w or DAK 3 Press OK repeatedly to enlarge the display in three steps Eco mode This function allows you to reduce the power consumption 1 Open the Tools menu with TOOLS 2 Select the menu item Eco TV with W or DAK 3 Switch on the Eco mode with or 4 Switch the Eco mode off again with or gt Entering the switch off time sleep timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Open the Tools menu with TOOLS 2 Select the line Sleep Timer with w or DAK 3 Enter the switch off t
28. external hard drive a USB memory stick or a digital camera to the USB socket Using the file browser you can then select and play the file formats of your choice for example MP4 MP3 or JPEG data Using the time shift function you can quickly and easily pause a programme using the re mote control and resume it at a later stage The programme is recorded in an external data medium m You can record any digital TV channels you choose The TV channels are converted by the televi sion and saved on an external data medium which is connected to the USB socket The saved programmes can be called up and played from the archive on the external data medium at any time You can also play a programme from the archive while recording another More information on recording and playing TV programmes can be found from page 28 6 ENGLISH digital satellite channels DVB S S2 m You require a digital roof antenna or indoor antenna passive or active indoor antenna with its own power supply to receive digital television channels DVB T If you wish to receive digital television chan nels via your cable system DVB C the an tenna cable for your cable operator must be connected to the television set Unlike analogue broadcasting not every channel has its own transmission frequency Instead several channels are grouped into what are known as bouquets on a regional or national level You can find the current trans mission inf
29. press OK to confirm Select the line Automatic Channel Search with w or A and press OK to confirm The menu appears ES SOURCE SETUP T AUTOMATIC CHANNEL SEAR Connection Type Country Cable Scan Type Frequency MHz Network ID 5 Select the line Scan Typ with W or A and set the option DTV with or gt 6 Select the line Cable Scan Type with w or A and set the option Quick or Full with or gt The search function Quick sets the channels according to the information provided by your cable provide in the transmission signal If the option Full is selected the entire fre quency range will be scanned The search can take a long time with this option This option is recommended if your cable pro vider does not support the search type Quick SPECIAL SETTINGS Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet For example the frequency 402MHz and network ID 61441 can be entered for Germany 7 Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Results menu appears and the scan for
30. select the option On The software will be updated automati cally as far as possible 2 Press EXIT to end the setting Restoring the television to the default settings This function allows you to delete the channel lists and all custom settings 1 In the SETTINGS menu select the line Restore Factory Defaults with w or A and press OK to confirm 2 Press ee green to confirm the warning message The Source Setup menu appears 3 Continue the settings with the chapter Initial setup and tuning television channels on page 14 46 ENGLISH OPERATION USING EXTERNAL DEVICES__ DIGI LINK Your television is equipped with the DIGI LINK function Cis This function uses the CEC Consumer Electronics Control protocol CEC allows external devices which are connect ed to the HDMI sockets by an HDMI cable e g DVD player to be operated with a remote control Prerequisite is that the devices connected support CEC Read the operating manual for the external device to find out how to activate the correspond ing function The DIGI LINK functions on your television Switching on the television automatically from standby If the external device e g Blu ray player is switched on the television also switches on and the appropriate HDMI preset is selected auto matically Depending on the features of the external de vice the external device e g AV receiver can b
31. 0 0005 mercury or more than 0 004 lead Rechargeable batteries batteries including those which do not contain heavy metal may not be disposed of with household waste Always dispose of used batteries in accordance with local environmental regulations Make enquiries about the appli cable disposal regulations where you live 1 Open the battery compartment by removing the lid 2 Insert the batteries 2 x 1 5 V micro for example RO3 or AAA Observe the po larity marked in the bottom of the battery compartment 3 Close the battery compartment Note m f the television no longer reacts properly to remote control commands the batteries may be flat Always remove used batteries mThe manufacturer accepts no liability for damage caused by leaking batteries ENGLISH _9 OVERVIEW Connections on the television set AV1 S VHS Optic Out Audio 10 ENGLISH SCART socket CVBS signal PC IN RGB signal Video and sound socket for S Video camcorder Socket for audio output USB2 optical for PCEM AC3 signals For connecting digital AV HDMI3 amplifiers or AV receivers Socket for audio HDMI2 input for a PC Sockets for audio input YUV signal VGA socket video input for PC Sockets for video input YUV signal USB socket for external data media and PVR function HDMI socket audio video input HDMI socket audio video input OVERVIEW SATELLITE ANT IN USB1 HDM
32. B memory stick into the USB2 socket of the television Notes m The USB2 socket of the television sup plies a maximum power of 500 mA in ac cordance with USB specifications External hard disks which require more power may therefore only be connected to the USB1 of the television m If you use a network cable for external hard disks which have been connected to the USB1 socket of the television this network cable must also be disconnected from the power supply when the television is switched off External data media may not be disconnect ed from the television while files on the data medium are being accessed Settings for USB recording Selecting the menu 1 Open the menu with MENU 2 Select the menu item USB RECORDING with w or A and press OK to confirm The USB RECORDING menu appears O USB RECORDING a PRnP Auto Preview Permanent Timeshift Manage data medium Safely Remove Disk Disk Used MB Total MB ENGLISH 29 USB RECORDING Switching on automatic preview If the automatic preview is switched on a pre view of the selected file appears in the file browser 1 Select the line Auto Preview with W or A lt 2 Switch on the function with or gt On 3 Press EXIT to end the setting Safely remove disk 1 Select the line Safely Remove Disk with V or A and press OK to confirm Note m The dis
33. C Directive relating to electro magnetic compatibility 2009 125 EC Ecodesign requirements for energy using products Implementing Reg EC No 642 2009 Ecodes ingn requirements for Televisions Implementing Reg EC No 278 2009 Ecodes ingn requirements for no load condition electric power consuption and average active efficiency of external power supplies for models with AC DC external adaptor 2010 30 EU Directive on the indication by la belling and standard product information of the consumption of energy and other resources by energy related products Supplementing Reg EC No 1062 2010 En ergy Labelling of televisions 2011 65 EU Restriction of the use of certain hazardous substances in electrical and elec tronic equipment Environmental note ped This product has been made from high quality parts and ma terials which can be re used and recycled Therefore do not dispose of the product along with normal household waste at the end of its service life Take it to a collection point for the recycling of electrical and electronic equipment Dispose of the used device at a collec tion point for electrical and electronic equipment The symbol on the product in the operating man ual or on the packaging indicates that recycling is possible Information on collection points is available from your local authorities Help protect the environment by recycling used products 66 ENGLISH Note for the Product Packag
34. Discrete or Continuous Discretex Moves the antenna in defined steps to the west and the east Continuous Moves the antenna to the west or east continuously Step Size Use or gt to select the number of steps with which the antenna should turn Step Size is only active when the Transport Mode was set to Discrete Move Motor Aligns the antenna with the selected satellite Use to align it to West use gt to align it to East Go To Stored Position Aligns the antenna to a saved satellite position Up to 50 posi tions can be saved Press OK and then select the saved position with or gt Press ee green to confirm the anten na will be aligned with the saved position Store Stored Position The current anten na alignment is saved Llimit Position Defines the range in which the antenna may move Use to set the western limit use gt to set the eastern limit Reset DiSEqC 1 2 Limit Resets the limit position of the antenna Press EXIT to end the setting ENGLISH automatically 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with v or A and press OK to confirm Select the option Cable with gt W or A and
35. ENGLISH 21 SETTINGS Sound settings 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with Ww or A and press OK to confirm The SOUND SETTINGS menu appears 9 SOUND SETTINGS Volume E A SRS TSHD Stereo Balance Sound Type Sound Mode SRS Sound Preset Speech Audio Output Setup External Audio Description Note m Additional operations are explained in the following sections Volume 1 Select the line Volume with W or A and change the setting with or gt Balance 1 Select the line Balance with w or A and change the setting with or gt 22 ENGLISH Automatic volume Television stations broadcast at different vol umes The automatic volume limiting AVL func tion means the volume is kept the same when you switch between channels 1 Select the line AVL with w or A and select the option On with or gt Note m If the SRS TSHD setting has been selected in the Audio Mode line the AVL line can not be selected Stereo two channel sound mono If the device receives two channel sound pro grammes e g a film with the original soundtrack on audio channel B display Dual Il and the dubbed version on sound channel A dis play Dual I you can select the audio channel you prefer If the device receives stereo or Nicam pro grammes it switches auto
36. Equalizer Equalizer offers a sound setting User that you can create Equaliser appears in the menu when Sound modex is selected as Spatial or Normal and Sound Medium as User 1 Select Equalizer with W or A and press OK to confirm The EQUALIZER menu appears Note m If the SRS TSHD setting has been selected in the Sound Modex line the Equalizer line will not indicate 2 Select the frequency bandwidth 120Hz with W or A Set the preferred value with or gt 3 Set the next frequency bandwidth with w or A and repeat the setting 4 Press to save the setting Audio description Audio subtitles Audio description is an additional audio channel for visually impaired persons Descriptions are provided of activities surroundings changes of scene gestures and actors facial expressions This audio channel is transmitted simultaneously with the normal sound on digital channels Avail ability depends on the respective channel and broadcaster 1 Select the line Audio Description with w or A and select the option On with or gt 2 Select the line Volume with v or A and change the volume with or gt Exiting the setting 1 Press EXIT to end the setting ENGLISH 23 TELEVISION OPERATION Basic functions Switching on and off 1 Switch the television to standby w
37. I1 CI Antenna socket for the satellite antenna DVB S S2 Antenna socket for a DVB T DVB C and analogue antenna Headphone jack 3 5 mm jack plug Sockets for audio output USB socket for external data media without a power supply of their own and PVR function HDMI socket audio video input Common Interface Slot Controls on the television set I Switches the television on and back into standby mode Adjusts the volume Selects channels in steps V P Pre selection for volume or chan nel selection Switches the television on from standby Adjusts the volume Selects channels in steps ENGLISH 11 OVERVIEW The remote control Main functions Switches on from standby Selects channel directly Selects the channel list All FAV 1 to FAV 4 Opens the HDMI CEC De vice List Display information Opens the main menu Opens the channel list Opens the TOOLS menu Adjusts the volume Muting Record play pause and stop only digital television channels on from an exter 9 nal data medium TV Radio My Media Opens the selection menu to change picture formats Then select with or gt and press OK to confirm Navigation in the menus Moves the cursor up and down in the menus A lt Q gt Moves the cursor to the left and right in the menus v Activates various functions and save functions settings 12 ENGLISH
38. LCD TV with LED Backlight 40 VLE 5421 BG AUS GUTEM GRUND GRUNDIG CONTENTS NOOO O A N 10 10 11 12 13 14 14 21 22 24 24 25 26 26 SETUP AND SAFETY GENERAL INFORMATION Special features of your TV Receiving digital channels Grundig SCR system Important notes on environmental protection Notes on still images CONNECTION AND PREPARATION Connecting the antenna and the power adapter Inserting batteries into the remote control OVERVIEW Connections on the television set Controls on the television set The remote control Main functions The remote control All functions SETTINGS Initial set up and tuning television channels Selecting language country and operating mode Tuning the television channels from satellite DVB S S2 Tuning terrestrial television channels DVB T Tuning television channels from the cable provider DVB C Changing the program table for the digital channels Picture settings Sound settings TELEVISION OPERATION Basic functions Zoom function Eco mode Zapping function Electronic TV guide Changing the picture format 2 ENGLISH 28 28 28 29 29 31 31 32 34 35 35 36 37 37 39 41 Al Al 42 42 42 43 44 46 47 47 48 49 49 50 51 51 52 USB RECORDING Information on recording and playing television programmes Possible limitations when using an external data medium Connecting external dat
39. Results menu 7 Press EXIT to finish the setting Tuning analogue television channels This setting is only necessary if you cannot re ceive any digital channels and you have not car ried out an analogue search during initial setup The television channels can be set directly or using the scan Switching the television to analogue reception Note m Analogue channels can be selected if the option Air or Cable has been selected 1 Open the Select input source menu with 2 Depending on the antenna system select the option Air or Cable with v A or gt as the input source and press OK to confirm Note Additional operations are explained in the following sections Setting all analogue television channels Analogue channels are displayed in the channel list after the digital channels Note m Plug the rooftop antenna cable for analogue television channels into the ANT IN socket on the television 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Air or Cable with gt V or A and press OK to con firm ENGLISH 61 SPECIAL SETTINGS 4 Select the line Automatic Channel Searche Tuning the television channels by
40. a on the market However we cannot guarantee operation for all data media E If a programme was recorded on an external data medium it can only be played back on your television set The playback of these pro grammes is not possible on other devices E If you send your television to be repaired and hardware components need to be replaced you might not be able to play the recordings again on the repaired television E Reception for SKY broadcasting service is cur rently only possible in Germany with a suitable set top box or suitable CA module Grundig does not accept liability for any loss of saved data on an external data medium m The USB Multimedia Player might not support some recorded events For proper playback please use the PRnP player m To avoid problems in recording and time shift ing features of your television using a high speed USB disk or Hard Disk is recommended Otherwise distortions or jams may be encoun tered in video playback 28 ENGLISH Possible limitations when using an external data medium Depending on the broadcaster you may experi ence various restrictions on some of the functions from some television channels GRUNDIG has no influence on these restrictions m Recording a programme on the external data medium can be disabled by the broadcaster If the message URI protected PVR function is blocked appears on the screen then re cording or timeshift is restricted one record
41. a passive or active indoor antenna with its own power supply to the an tenna socket ANT IN on the television set or 2b To receive digital cable channels DVB C connect the cable for the rooftop antenna to the antenna socket ANT IN on the television set or 2c To receive analogue TV channels connect the cable for the rooftop antenna to the an tenna socket ANT IIN on the television set Note m When connecting an indoor antenna you may have to try it out at different positions until you get the best reception 8 ENGLISH 3 Plug the power cord of the power adapter into a wall socket Notes m Before pluging in the electrical cable make sure that the adapter is connected to the tel evision m Do not plug in the power adapter until you have connected the external equipment and the antenna m Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord CONNECTION AND PREPARATION Inserting batteries into the Environmental note remote control a This symbol on recharge able batteries batteries or Pb on the packaging indicates that the rechargeable bat tery battery may not be disposed of with regular household rubbish For certain rechargeable batteries batteries this sym bol may be supplemented by a chemical symbol Symbols for mercury Hg or lead Pb are provided if the rechargeable batter ies batteries contain more than
42. a media Settings for USB recording Pausing time shift programmes Recording programmes Presetting programmes to be recorded Playback Deleting programmes in the recording list USB OPERATION File formats Connecting external data media Removing the external data media The file browser Settings in the USB setup menu Basic playback functions Additional playback functions TELETEXT OPERATION TOP text or FLOF text mode Additional functions CONVENIENCE FUNCTIONS Opening the SETTINGS menu Language settings Setting the date and time Timer functions Parental control settings Updating software Restoring the television to the default settings OPERATION USING EXTERNAL DEVICES DIGI LINK The DIGI LINK functions on your television Device operation High definition HD ready Connection options Connecting external devices Using a DVD player DVD recorder video recorder or set top box Headphones Hi fi system AV receiver CONTENTS 53 53 53 53 54 54 54 54 55 55 56 56 57 60 OPERATION AS A PC MONITOR Connecting a PC Selecting presets for the PC Settings for PC mode OPERATION WITH A COMMON INTERFACE What is a Common Interface Inserting the CA module Access control for Cl module and smart card SPECIAL SETTINGS Searching for digital television channels from a satellite automatically Searching for digital television channels from a satellite manually LNB settings Settings f
43. al video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified de vice must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device USB setup menu Go to vod divx com for more information on how to complete your registration 38 ENGLISH Basic playback functions 1 Select the data medium by pressing f gt use V A or gt to select the option USB and press OK to confirm The file browser appears 2 Select the file format video files audio files picture files with w or A 3 Switch to the folder file list with OK Note m USB data medium with several partitions is connected to the USB sockets the letter for the respective drive e g C appears behind the folder symbol Select the letter of the drive with v or A and press OK to confirm 4 Select the folder or file with w or A and press OK to open it A list of subdirectories appears Note m Switch back to the main folder with 5 Select the track or picture with W or A and press gt to start playing Notes m You
44. arting point A 2 Mark the end point B by pressing gt once again at the required scene during playback This scene is marked as the end point B The television repeats the programme be tween these two points 3 Quit the repeat function with E 34 ENGLISH Playback during a recording During a recording you can either watch the programme you are currently recording or watch a different one that you have already recorded 1 Select the channel to be recorded with 0 or P P and press ik to start the recording Open the menu with MENU Select the men item USB RECORDING with v or A and press OK to confirm 4 Confirm the menu item PRnP Archiv with OK button The menu appears 5 Select the programme you want with w or A and press P gt to start playback The recording continues in the background 6 Press flll to end playback 7 Press ll to stop recording Deleting programmes in the recording list You can delete programmes from the record ing list 1 Open the menu with MENU 2 Select the men item USB RECORDING with v or A and press OK to confirm 3 Confirm the menu item PRnP Archiv with OK button The menu appears 4 Select the programme to be deleted with W or A 5 Press e e blue to delete the programme 6 Confirm the security query with ee green Note m Y
45. ay player DVD player recorder set top box notebook PCs m Video signal Digital video resolution stand ard 576p HDTV 720p 1080i m Audio signal digital audio stereo multi chan nel compression uncompressed m Presets HDMI 1 HDMI 2 or HDMI3 1 Connect the HDMI1 HDMI2 or HDMI3 socket on the television and the corresponding HDMI socket on the external device using a standard HDMI cable digital video and audio signal With analogue video signal progressive m Suitable devices DVD recorders players games consoles m Video signal YUV resolution standard 576p HDTV 720p 1080i m Audio signal stereo analogue Component preset 1 Connect the PC IN socket on the television and the corresponding socket on the external device using a VGA YPBPR adapter cable video signal 2 Connect the Audio sockets on the television to the corresponding sockets of the external device with a suitable cable audio signal 50 ENGLISH using the SCART socket CVBS RGB signal m Suitable devices Digital satellite receiver DVD player recorder set top box games con sole video recorder decoder m Video signal CVBS RGB m Audio signal stereo analogue m AV 1 preset 1 Connect the AV1 S VHS socket on the television and the corresponding socket on the external device using a SCART cable video and audio signal Activating a decoder If a decoder is co
46. can view information on the film data by pressing m When playing MP3 data information on the album track and singer is displayed at the left of the menu m When playing picture files you can use to display information about the resolution and size m When playing picture data press twice to enter the DivX Settings menu m When playing picture data the file browser switches off Press llll to display the file browser again 6 Press Ilil to pause playback 7 Press gt to resume normal playback 8 Press llll to end playback The file browser appears USB OPERATION Notes m Use A to select Up Folder when you would like to return to the last folder Use Root and then press OK to return to the main folder m t is possible that files which are actually supported do not function correctly in USB mode This is because certain files are not recorded with standardised compression processes although they feature the right file ending m If a video file features several audio tracks audio streams you can switch these over during playback in full screen mode with m When playing music files you can use other options in the USB mode at the same time This way you can for example enhance a slideshow with music m For films only subtitles in the SRT ASS SSA SMI format are sup ported The names of the subtitle and film files must be identical
47. ck and for other channel sources If the Film mode is switched on for pro grammes without a feature film signal minor problems such as picture freeze defective subtitles or fine lines in the picture could occur m The function Dynamic Contrast adapts the contrast dynamically and optimally for the respective picture content m With Dynamic Backlight the device opti mally adapts the background lighting to the 3 Select the line Picture Mode Bright ness Contrast Sharpness Colour or picture content Colour Temperature with W or A m The Backlight can only be set manually Select the value with or gt and press when the function Dynamic Backlight is OK to confirm deactivated Notes m MEMC will only appear in menus of LCD products with 200 Hz PPR Feature and LED products with 400 Hz PPR feature 5 Press EXIT to end the setting m When changing the values with or gt the screen will be split You can see the current picture value on the left side the new setting on the right side m In the PICTURE SETTINGS menu you can also find other additional settings 4 Select the line DNR Mpeg NR Vibrant Colour Perfect Clear Film Mode Gamma Dynamic Contrast Dynamic Backlight Backlight or MEMC with VW Or IAk Select the value with or gt and press OK to confirm
48. d by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty a To ensure fires do not occur always keep candles and other open flames away from the device SETUP AND SAFETY Do not connect any other equipment while the device is switched on Also switch off other equipment before connecting it Do not plug in the power cord of the device until you have connected the external equip ment and the antenna m Make sure the mains plug is freely accessible m Keep the TV away from following devices as much as possible cell phone microwave and other devices that uses high frequency radio wave Otherwise TV may be malfunction due to radio wave interference Do not expose the batteries to excessive heat such as direct sunlight fire etc Do not use old and unused batteries together m Only replace the exhausted batteries with those having the same model value and prop erties m By ensuring proper disposal of these batteries you will have contributed in prevention of po tential hazards on the environment and human health that may arise from inappropriate dis posal of the batteries m This is a Class A product During operation the device could cause radio interference In this case the user may have to remedy this Please contact your specialist dealer Caution m If you plan on using a wall bracket for your television make sure you read the assembly manual
49. de 1 Select the line Sleep Timer with w or DAK 2 Enter the switch off time with or gt Note m To switch off the function use or gt to set the switch off time to Off 3 Press EXIT to end the set up Switch on timer In the Auto On menu you can enter a switch on time for the television After the preset time has elapsed the television switches on from standby at the preselected volume and the preselected television channel 1 Select the line Auto On with W or A and press OK to confirm 2 Select the line Mode with w or A and use or gt to select when the television should switch on 3 Select the line Input Source with W or A and use or gt to select the input source 4 Select the line Service Type with W or A and use or gt to select the preferred op tion ATV DTV Radio or DATA 5 Select the line Channel with w or A and use or gt to select the preferred channel Note m The line Channel is only active when the in put signal currently in use has been set If no entry has been made then the first channel of the selected input source will be used ENGLISH 43 CONVENIENCE FUNCTIONS 6 Select the line Volume with W or A and use or gt to set the volume 7 Select the line Set Hour with w or A and en
50. ded in the recording schedule due to possible electronic TV guide inaccuracies Please be advised that in this case when one or more of these programs are parental rated the highest access level will be applied for the entire recording Set the lead follow up time With this function you can change the recording time set by the electronic TV guide If you think that a program will start a few min utes earlier or will end several minutes later you can add up to 60 minutes to this time 1 Display channel information with GUIDE 2 Switch to the timer function with eee yellow and then select the Personel recording time edit menu with ee green 3 Change the start time with or gt Use W to switch to the End row and change the end time with or gt 5 Save the setting with ee green Switch off the program information with GUIDE USB RECORDING by manual data entry You can preset up to 25 programmes for timer recording 1 Press GUIDE to display channel informa tion The electronic TV guide appears Open the MAKE SCHEDULE menu by pressing eee yellow twice Select the line Type with v or A and select the option Recording with or gt Select the line Channel with w or A and select the channel with or gt Select the line Mode with w or A and select the prefe
51. e Packaging materials of your product are recy clable Please ensure that packaging materials of your product are disposed of separately in accordance with the regulations set by the local authorities in order to have the packaging mate rials included in the environmental friendly recy cling process INFORMATION Troubleshooting If the information provided below does not help please consult an authorised GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers Screen lit snow but no Antenna cable Is the antenna cable connected station visible No TV channel tuned Start a channel scan Insufficient contrast in picture The picture settings are not correct Adjust the brightness contrast or colour setting Problem at station Try another channel Picture and or sound distorted Interference from other devices Place the device in a different position Ghosting reflection Channel setting Automatic or manual tuning fine tuning Have antenna cable or system checked No colour Colour intensity too low Turn up the colour Adjust TV standard if setting option Select the correct colour standard is available Problem at station Try a different channel Picture but no sound Volume is set to a minimum Turn up or switch on the volume Teletext impaired or absent Problem at station Try a different channel Television channel no teletext Try with a d
52. e switched on alone the television stays in standby Automatic selection of the HDMI preset on the television If your television is switched on and you then switch on the external device e g DVD player the appropriate HDMI preset on the television will be selected Selecting the menu language The television menu language is automatically selected on the external device e g DVD player The external device must support this function Switching off the external device automatically If you switch your television to standby the ex ternal device if it is switched on will also be switched to standby DIGI LINK is always active on your television set Searching for and activating external devices You can connect up to 11 devices with DIGI LINK functions to your television 1 Open the Tools menu with TOOLS 2 Select the menu item CEC with w or A and press OK to confirm The HDMI CEC Device List appears 3 Start the device search with e red The devices found are displayed in the menu 4 Select the device for operation with w A or gt and press OK to mark it If the selected device is connected to a different input to the current one a switch to the respective input will occur auto matically 5 Press EXIT to end the setting ENGLISH 47 OPERATION USING EXTERNAL DEVICES__ Device operation You can decide whether external devices sh
53. ernal data medium for 1 minute recording time While recording you can watch another pro gramme from the archive One touch programme recording 1 Select the television channel to be recorded with 1 0 or P P and press EI to start the recording Information on the recording is displayed the recording symbol the channel name the programme the recording time and the available memory space After a short time this information disap pears 2 End the recording with E Confirm the display with ee green or press e red to continue the recording Notes m After the recording is complete the record ing will be automatically saved on the exter nal data medium m If the external data medium is disconnected from the USB socket during recording the recording will be stopped automatically and will not be saved ENGLISH 31 USB RECORDING Recording a programme from the channel list 1 Open the CHANNEL LIST with OK 2 Select a television channel with w A or gt and press OK to confirm 3 Press MENU to exit the channel list 4 Press x to start recording Information on the recording is displayed the recording symbol the channel name the programme the recording time and the available memory space After a short time this information disap pears 5 Press lx to stop recording Confirm the display with e g
54. for the wall bracket or have a spe cialist assemble it m When purchasing the wall bracket make sure that all the fastening points on the televi sion are also on the wall bracket and that they are all used when mounting it ENGLISH _5 GENERAL INFORMATION Receiving digital channels m You require a satellite antenna to receive Special features of your TV m You can receive and watch digital TV chan nels using your television set via DVB S S2 DVB T and DVB C including High Definition programmes HD However the reception of digital TV channels in HD is currently limited to a few countries in Europe Although this television set complies with the current DVB S S2 DVB T and DVB C stand ards status August 2010 the compatibility with future DVB S S2 satellite transmissions as well as terrestrial DVB T and DVB C cable pro grammes cannot be guaranteed Your television set can receive and process all analogue and non encrypted digital TV chan nels The television set is also equipped with digital and analogue receivers The electronic TV guide for digital channels only informs you about any schedule changes at short notice and provides an overview of all the broadcasters schedules for the next few days Detailed information on the individual television programmes are when provided by the broadcasting station are also avail able in the electronic TV guide You can connect various data media such as an
55. for video and audio files only You can select different speeds 2 fold 4 fold 8 fold 16 fold and 32 fold forwards and back wards 1 Select the playback speed during playback with 4q or gt P 2 Press gt to resume normal playback Rotating pictures picture files only You can rotate pictures by 90 1 During playback press or gt to rotate the pictures by 90 Repeat functions Options One Repeat the current track will be repeated All Repeat all tracks will be repeated 1 Switch off the repeat function before play back with TOOLS 2 Start playback with 3 Deactivate the repeat function with TOOLS The display changes to None Repeats 40 ENGLISH TELETEXT OPERATION TOP text or FLOF text mode 1 Press TXT to switch on teletext 2 Select teletext pages directly with 1 0 or step by step with w and A Return to teletext page 100 with Note m At the bottom of the screen there is an info bar with red green and depending on the channel yellow and blue panels Similarly the remote control also features buttons with different colours with which these pages can be selected 3 Go back a page with e red Go to the next page with ee green 5 Select a particular chapter with eee yellow 6 Selecta particular subject with eeee blue 7 Quit teletext with TXT Normal text mode 1 P
56. ght as this will impair cooling m Heat build up can be dangerous and shortens the service life of the television For reasons of safety have a repairman remove any dirt in the television from time to time m Never open the television under any circum stances Warranty claims are excluded for damage resulting from improper handling a ENGLISH m Make sure the power cord or the power sup ply unit if provided are not damaged m Only operate the television with the power supply power cord provided m Thunderstorms are a danger to all electrical devices Even when the television is switched off it can be damaged by a lightning strike to the mains or the antenna Always disconnect the mains and antenna plugs during a storm m Use a damp soft cloth to clean the screen Do not use water with soap or detergent m When deciding where to put the device re member that furniture is often coated with various types of varnish and plastic Many of these contain chemicals which can corrode the feet of the device leaving marks on the surface of the furniture which can be difficult or impossible to remove m The screen of your LCD LED television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds speci fie
57. his function allows the satellite antenna to be oper ated via the television set 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with W or A and press OK to confirm The SOURCE SETUP menu appears Select the line Antenna Settings with w or A and press OK to confirm Select the line DiSEqC Modex with w or A Select the option DiSEqC1 2 with or gt The line DiSEqC 1 2 SETTINGS lt is active Notes m Additional operations are explained in the following sections m The following description about the DiSEqC 1 2 settings premise a substantial expertise about the satellite systems Ask your specialist dealer ENGLISH 57 SPECIAL SETTINGS DiSEqC 1 2 Settings You can adjust the alignment of the satellite an Searching for television chan nels from the cable provider tenna to each individual satellite These settings will be saved so that the antenna can later be easily guided to each saved alignment 1 58 Select the line DiSEqC 1 2 SETTINGS with V or A and press OK to confirm The DiSEqC 1 2 SETTINGS menu ap pears Select the preferred option with w or A Transponder Press OK select the transponder from which the signal is being received with gt W or A and press OK to confirm Moving Mode Use or gt to select the option
58. ifferent TV channel or antenna system carry out fine tuning Station signal too weak Check antenna The remote control does Obstacle between remote control Point remote control at television not work and device Battery problem Check batteries and replace if necessary Operating mode undefined Switch off the television at the mains switch for two minutes Picture too dark in PC mode Incorrect setting for picture resolution Change settings on the PC and picture frequency on the PC e g 1280 x 768 resolution refresh rate 60 Hz Note m This is a Class A product During operation the device could cause radio interference In this case the user may have to remedy this Please contact your specialist dealer ENGLISH 67
59. ime with or gt Note m To switch off the function use or gt to set the switch off time to Off ENGLISH 25 TELEVISION OPERATION Zapping function This function remembers the channel you are currently watching while you switch over to other ones zapping 1 Press 1 0 or P P to select the channel to be stored in the zapping memory and press 4 to confirm 2 Press 1 0 or A W to switch to another television channel 3 Press 2 to switch between the saved tel evision channel and the last television chan nel viewed 4 End the function with MENU 26 ENGLISH Electronic TV guide The electronic TV guide provides an overview of all programmes that will be broadcast in the next week for digital channels only 1 Press GUIDE to display channel informa tion Notes m Not all channels supply provide a detailed TV guide m Many broadcasters transmit the current schedule but do not offer detailed descrip tions m There are broadcasters which do not pro vide any information at all 2 Press W or A to select a television channel Today s programmes on the television channel selected are displayed 3 Switch to the information about the current programme with gt Notes m You can open and switch off the extensive programme information with m You can can added the selected broadcast to the memory time
60. ing possible or disabled recording not possible by the broadcaster URI User right information Copyright in formation E f you record and save a programme on the archive of an external data medium playback can be restricted The broadcaster can allow you to view this programme one or more times but it may onlyv be available for a certain period of time E Programmes not suitable for minors will require the input of a PIN number immediately before recording starts If this authorisation is not given the recording may not start E Copying a programme from a digital television channel onto a video or DVD recorder using the AV 1 socket analogue picture sound signal can also be restricted by the broadcaster Prerequisite is that your device supports the copying function USB RECORDING Connecting external data media Notes m Before connecting the external data medium it is recommended to switch the television to stand by mode m Before removing the external data medium the television must be switched to standby so that no data loss occurs m Your television features two USB sockets USBI1 and USB2 USB1 is used to connect data media which require an additional power supply for example external hard disks Connect the USB1 socket of the television and the corresponding socket of the data medium external hard disk using a USB ca ble or insert the USB plug of the US
61. ith w or DAK Use or gt to select whether you want to search for television channels TV only radio stations only Radio or both Radio TV 9 Select the line Network Search with w or A Select the option On with or gt If the Network Search is set to On the data will be accessed via the new tran sponder of the network which has been set 10 Start the scan with e red Note m If the previously stored channels should be retained in the channel list and the new channels found be added to it then press ee green If e red is pressed the saved channels will be deleted from the current channel list The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The search is complete as soon as the PROGRAM TABLE appears Note m You can abort the search by pressing EXIT 11 Press EXIT to end the setting ENGLISH 55 SPECIAL SETTINGS Searching for digital television channels from a satellite manu ally If you know the parameters of a new television channel you can also search for it manually Current transponder data can be found in the teletext in satellite TV magazines or on the Internet 1 Open the menu with MENU 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm
62. ith the pow er switch ON e OFF 2 Press 1 0 or P or P to switch on the television from standby mode 3 Press to switch the television to standby Selecting channels 1 Press 1 0 to select presets directly 2 Select television channels step by step with P or P 3 Open the channel list with OK select the preferred television channel with w A or gt and press OK to confirm Exit the channel list with MENU Notes m Informations appears automatically for a short time m Switch over to the radio programmes press TV RADIO Select the Channel List with OK The Radio List appears Select the radio programme with v or A and press OK to confirm Use TV RADIOx to switch back to the Channel List for television channels Selecting channels from lists You can select channels from various lists e g all channels FAV 1 to FAV 4 l Press FAV to open an overview of pro grame tables The overview is displayed 2 Select a channel list with A or W and open it with OK 3 Select a television channel with v A or gt and press OK to confirm 4 Press EXIT to exit the channel list 24 ENGLISH Selecting a preset AV channel 1 Open the Select Source menu with f gt 2 Select an AV preset with V A or gt and press OK to confirm 3 Use
63. k can now be removed from the socket Formatting the external data media 1 Select the Format Partation line with w or A button and confirm with OK button 2 To confirm the formatting operation press yeex green button or to cancel formatting operation press e red button 3 Press EXIT button to exit Selecting external data media If several external data media are connected to the television you can select the preferred data medium 1 Select the line Disk with W or A 2 Select the preferred data medium with or gt 3 Press EXIT to end the setting 30 ENGLISH Selecting a partition on the external data medium If the external data medium features several par titions select the partition you would like to use 1 Select the line Partition with W or A 2 Select the partition you wish to use with or gt 3 Press EXIT to end the setting Testing the external data medium You can subject external data media to a test and establish whether they are suitable for the chosen functionality 1 Select the line Disk with w or A If several data media are connected select the preferred data medium with or gt 2 Select the line Partition with W or A If several partitions are available select the partition you wish to use with or gt 3 Select the line Check Disk with w
64. le D symbol are trademarks of Dolby Laboratories 52 ENGLISH Playing the audio signal via the HiFi system 1 Connect the socket on the television to the corresponding socket of the AV receiver with an cable digital audio signal Note m f this function is not activated the audio sig nal is transmitted to the HiFi system AV re ceiver connected to 3 5 mm jack plug into the headphone socket on the left side of the television Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select Audio Output Setup with w or A and press OK to confirm The menu appears 4 Select the line Audio Out with W or A and press or gt to activate the audio output Line Out 5 Select the line Audio Out Status with w or A and select the option Fixed or Ad justable with or gt Notes m f you select Adjustable the volume can be changed in the menu option Audio Out Volume m f the audio should only be output via the HiFi system AV receiver select the option Off in the line TV Speaker with or gt 6 Press EXIT to end the setting OPERATION AS A PC MONITOR Connecting a PC SOURCE SETUP 1 Connect the PC IN socket on the television Ea to the corresponding socke
65. ls to be skipped when you select with A or w Selection is still possible using the number buttons 1 Inthe PROGRAMETABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked using Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK ENGLISH 63 SPECIAL SETTINGS Creating lists of favourites You can select your favourite channels and save them in up to four favourites lists Fav 1 to Fav 4 l In the PROGRAME TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with v or A 3 Use or gt to push the channel into one of the favourites lists 1 to 4 and press OK to confirm The position in the favourites list is marked with You can enter the same channel in more than one favourite list Each favourite list can store up to 250 channels Note m Channels can also be deleted from favour ites lists Select the channel to be deleted with W A or gt and delete it with OK Exiting the settings 1 Press EXIT to end the setting 64 ENGLISH Displaying signal information for digital channels only 1
66. matically to stereo sound display Stereox You can switch the sound to Mono if the stereo sound quality is poor 1 Select the line Audio Type with w or A and adjust the setting with or gt Stereo width This broadens the sound output for stereo pro grammes and improves the sound with mono reception 1 Select the line Audio Mode with w or A 2 Select the option Spatial with or gt SETTINGS Soundeffects This menu offers three preset sound effects Music Natural and Speech and one setting to be created by you User 1 Select the line Sound Preset with w or DAK 2 Select the sound effect Music Natural or Speech by pressing or gt Note m User option is active when Sound mode setting is selected as Normal or Spatial SRS TruSurround HD SRS TruSurround HD is a patented audio tech nology which is integrated into the television set and only requires the built in speakers to gener ate a Surround Sound effect 1 Select the line Sound Mode with w or A 2 Select the option SRS TSHD with or gt 3 Select the line SRS Sound Preset with w or A 4 Select the sound effect Music Movie Natural or Speech with or gt s s is a trademark of SRS Labs Inc TruSurround HD technology is incorporated under lisance from SRS Labs Inc
67. n one favourite list Each favourite list can store up to 250 channels Notes m Channels can also be deleted from the favourites lists Select the channel to be deleted with v A or gt and press OK to delete it m When deleting a channel from the favourites list the order within the favourites list will be updated 4 Quit the program table with EXIT Sorting channels in the favourite list You can change the order of channels in the favourites list 1 In the PROGRAM TABLE menu select the favourites list 1 to 4 2 Select the channel which should be moved with W A or gt and mark it with e red 3 Move the channel to its new position with V A or gt and press OK to confirm Notes m Repeat steps 2 and 3 if you would like to change other channels within the same favourites list m Repeat steps 1 to 3 if you would like to change channels in a different favourites list 4 Exit the current favourites list with eeee blue The entire programe table will appear again 5 Quit the program table with EXIT 20 ENGLISH Enter own names for the favourites lists max 6 characters You can enter own names for all favourites lists 1 Inthe PROGRAM TABLE menu switch over to the list view with e e e yellow 2 Select the desired favourites list with 1 till 4 The Favorite Name screen i
68. nnected to the AV1 S VHS socket this must be activated to provide an unencrypted video audio signal 1 Open the menu with MENU 2 Select SETTINGS with w or A and press OK to confirm The SETTINGS menu appears 3 Select the Decoder with W or A Activate the function with or gt On 5 Press EXIT to end the setting With S Video signal m Suitable devices DVD player recorder video recorder camera recorder notebook PC m Video signal Y C m Audio signal stereo analogue E S VHS preset 1 Connect the AV1 S VHS socket on the television and the corresponding socket on the external device using an EURO AV ca ble video and audio signal OPERATION USING EXTERNAL DEVICES__ Using a DVD player DVD recorder video recorder or set top box Switch on the external device and select the function you wish to use Press afp x Use V A or gt to select the preset for the input signal AV1 AV2 S VHS HDMI1 HDMI2 HDMI3 or Component and press OK to confirm Headphones Connecting the headphones Plug the headphone jack 3 5 mm jack plug into the headphone socket on the left side of the television Changing the headphone volume 1 2 Open the menu with MENU Select the menu item SOUND SETTINGS with v or A and press OK to confirm The SOUND SETTINGS
69. ntenna connected in the following chapters SETTINGS Tuning the television channels from satellite DVB S S2 You have two options for tuning digital satellite channels A The easy installation which pre configures all antenna settings for the satellite channels on Astra 19 2 East B The advanced installation can be used if you wish to receive satellite channels from various satellites To do so you must make the antenna settings Satel lite LNB Power LNB Type DISEqC Mode LNB Selection for the satellites chosen Easy installation 1 In the Source Setup menu in the Connec tion Typex line select the option Satellite with or gt 2 Select the line Easy Installation with w or A and press OK to confirm Other menu options will be displayed the satellite Astra 19 2 East is preset 3 Start the scan with ee green The Search results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note m You can abort the scan by pressing EXIT Advanced installation 1 Inthe Source Setup menu in the Connec tion Typex line select the option Satellite with or gt 2 Select the line Advanced Installation with W or A and press OK to confirm The menu appears
70. o the previous page with P With eee yellow you can open the LIST MANAGEMENT within the programe table In this List Management you can create your own favourites lists With eeee blue you can sort the channels ac cording different criteria INSTALLATION PROGRAM TABLE 1 Das Erste HD Service 2 ZDF HD DTV 6 EinsPlus 7 arte DTV DTV D 11 HD1 DTV ca 16 TV Sport DTV 18 ENGLISH 3 arte HD DTV 8 Phoenix TV 13 Film DTV 18 SKY DTV Selecting channel lists 1 Open the menu with MENU 2 Select the SOURCE SETUP menu with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Programe Table with w or A and press OK to confirm The menu PROGRAM TABLE appears Important m Programe table and favourites lists are saved separately according to the different input sources satellite cable air m When opening the program table the respec tive channel list for the current input signal appears Notes E If in the program table A appears added to the name of the channel you need a Cl module and a Smart Card for watching these channels mAs the received data channels are not dis played in the program table number chan nels displayed in the program table may be less than 6000 Network ALL DTV ASTRA 19 2 4 N24 5 Einsfestival DTV DTV 9 Test R 10 ANIXE HD DTV DTV 14 Promo 15 Sp
71. ons allows you to display the televi sion channel on the left side the teletext on the right side 1 Switch the function on with B lt The television channel and teletext are dis played next to each other 2 Switch the function off with Bi ENGLISH 41 CONVENIENCE FUNCTIONS Opening the SETTINGS menu 1 Open the menu with MENU 2 Select the menu item SETTINGS menu with V or A and press OK to confirm The SETTINGS menu appears SETTINGS R English Subtitle English Subtitle Mode Ojjj Date amp Time Time Adjustment Time Zone Note m Additional operations are explained in the following sections Language settings Changing the menu language 1 Select the line Menu with w or A and press OK to confirm The Select Menu Language menu appears 2 Select the menu language with gt V or A and press OK to confirm 3 Press EXIT to finish the setting 42 ENGLISH Changing the audio language only for digital television channels You can define a primary and a secondary audio language 1 Select the line Audio with W or A and press OK to confirm The Select Audio Language menu appears 2 Select the audio language with gt V or A and then use e red to set it as the primary audio language or use ee green to set it as the secondary audio language The primary
72. or motorised antennas DiSEqC 1 2 Searching for digital terrestrial TV channels automatically Searching for digital terrestrial TV channels manually Tuning analogue television channels Changing stored analogue channels Displaying signal information INFORMATION Product Fiche Other information Service information for dealers Environmental note Note for the Product Package Troubleshooting ENGLISH _3 SETUP AND SAFETY Please note the following instructions when setting up the television set m This television is designed to receive and dis play video and audio signals All other uses are expressly prohibited m The ideal viewing distance is five times the diagonal screen size m Light falling on the screen impairs picture quality m To ensure the device is always adequately ventilated make sure there is sufficient space between the television set and nearby furni ture m The television is designed for use in dry rooms If you do use it outdoors make sure it is pro tected from moisture such as rain or splashing water Never expose the television set to moisture m Do not place any vessels such as vases on the television as they may spill liquid thus present ing a safety risk m Place the television on a hard level surface Do not place any objects such as newspapers on the television or put cloth or similar items under it Do not place the television close to heating units or in direct sunli
73. ormation on teletext from various broadcasters or by consulting a current TV guide or the Internet Various digital television channels from pri vate broadcasters are encrypted DVB S S2 DVB T and DVB C Watching these channels and the recording and playback functions are only possible with the appropriate Cl module and a SmartCard Ask your specialist dealer The range of channels available from the pub lic broadcasting institutions ARD with EinsEx tra EinsFestival or ZDF with ZDF Info and all third party broadcasters are not encrypted and can be received without a SmartCard Grundig SCR system m Your TV supports SCR system Satellite Channel Router If your antenna installation is equipped with an Single Cable Distribution multiswitch all television sets which are connected on this antenna can receive the television channels stand alone GENERAL INFORMATION Important notes on environmental protection m The following information will help you to save resources and money as well m f you are not using your television set for several days you should pull out the mains plug for environmental and safety reasons This way the television does not consume any electricity m f the device is equipped with a power switch switching it off using this switch will be suffi cient The energy consumed by the television set is reduced to virtually O W E In standby mode the television set uses very little energy Howeve
74. ort the scan type Quick Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet Start the scan with ee green The Search Results menu appears and the search for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLEx appears Note m You can abort the scan by pressing EXIT Press EXIT to end the setting Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 64 If the level is displayed in green you can record HD channels without any problems ENGLISH 17 SETTINGS Changing the program table for the digital channels Channels which are found using the scan are saved in the PROGRAM TABLE You can delete channels which are not required from the programe table you can change the order of channels within the programe table and lock individual channels Parental control You can also add channels to the favourites list in addition you can change the order of chan nels within the favourites list With ee green you can display the channels which belong to one network Switch to the next page in the programe table with P and t
75. ort1 DTV DTV 19 TV6 20 TV5 DTV DTV SETTINGS Deleting channels in the program table 1 In the PROGRAM TABLE menu select the Edit mode by pressing e red 2 Select the television channel to be deleted with W A or gt and press eee yellow to delete Note m You can delete all channels with eeee blue 3 Confirm the deletion process with ee green or cancel the deletion process with e red 4 Quit the program table with EXIT Change the order of the channels in the program table only satellite channels and digital television channels from the cable provider 1 In the PROGRAM TABLE menu select the Edit mode by pressing e red 2 Select the channel which should be moved with W A or gt and mark it with e red 3 Move the channel to its new position with V A or gt and press OK to confirm Note m Repeat steps 2 and 3 if you would like to change other channels 4 Quit the program table with EXIT Sorting channels in the program table only satellite channels and digital television channels from the cable provider You can sort the order of the channels in the pro gram table according different criteria 1 In the PROGRAM TABLE menu select the Sort mode by pressing eeee blue 2 Select the sort criteria for satellite channels with e red ee green or eee
76. ou cannot delete programmes in the Recorded Event menu which are currently being recorded or played back 7 Press EXIT to close the menu USB OPERATION File formats Your television can work with the following file formats using the USB sockets Video data Special codecs for video compression and decompression provide more memory space without compromising the picture quality exces sively Your television plays video files in the formats DIVX XVID H 264 MPEG 4 AVC L4 1 4 ref erence pictures MPEG 4 MPEG 2 MPEG 1 MJPEG and MOV The following file name extensions are also sup ported AVI MKV MP4 TS MOV MPG DAT VOB These files can also contain audio files compressed using MP3 AAC or Dolby Digital Audio data Your television can play audio data in the for mats MP3 AAC MP3 is the abbreviation for MPEG 1 Level 3 and is based on the MPEG 1 standard which was developed by the MPEG Motion Picture Expert Group AAC stands for Advanced Audio Coding and was also developed by MPEG AAC provides better sound quality at an identical data rate These formats allow audio files to be recorded and played which sound as good as a CD while taking up only a fraction of the memory space File name extensions which are supported MP3 MP2 M4A AAC MP3 files can be organised into folders and subfolders as on the computer Image data Your television can display pictures in the formats JPEG PNG
77. ould react to your television s remote control 1 Press afp x use W A or gt to select the preset HDMI1 to HDMI3 and press OK to confirm 2 Open the menu with MENU 3 Select the menu item SOURCE SETUP with W or A and press OK to confirm The SOURCE SETUP menu appears HDMI S1010 0 ES a 0 H Source HDMI 1 DIGILINK Device Selection GRUNDIG DVD Remote Control RC Passthrough Device Standby 4 Select the line Remote Control with w or AK 5 Select the type of operation RC Passthrough Deck or Tuner with or gt Notes m RC Passthrough can be used for all devices Deck and Tuner can be selected in ac cordance with the external device which has been connected m Try out which type of remote control opera tion the external device reacts to the best m Read about the scope of functions of the DIGILINK compatible device in the respec tive operating manual 6 Press EXIT to end the setting as ENGLISH Switching the device to standby This option switches the external device to standby 1 Press gt k use W A or gt to select the preset HDMI1 to HDMI3 and press OK to confirm Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears
78. ox format is especially suitable for programmes in 16 9 format The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pic tures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The pic ture geometry remains unchanged Subtitle format If you cannot see the subtitles at the bottom of the screen select Subtitle Panoramax format This setting is suitable for films in an especially wide format During programmes in 4 3 format the picture is stretched horizontally if the Panorama function is selected The picture geometry is stretched horizontally Overscan off format In this mode HD pictures are not cropped by the HDMI sockets or component sockets and are displayed in their original size This only applies in HDMI mode and for resolutions of 720p or above ENGLISH 27 USB RECORDING Information on recording and playing television programmes E Recording and playback of television pro grammes is only possible with digital television channels DVB S S2 DVB T and DVB C m The digital television channels DVB S S2 DVB T and DVB C you are able to record and playback also depends on the broadcaster E Recording and playback of programmes as well as the time shift function can only be carried out using an external data medium hard drive or USB stick E Recordings can be made with most data medi
79. r authorised dealer 4 Press EXIT to end the setting SPECIAL SETTINGS Searching for digital television channels from a satellite automatically Satellite data changes frequently new channels are constantly being added You should therefore perform an automatic search from time to time This searches all transponders for new channels 1 2 Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Q SOURCE SETUP T n Source Satellite Automatic Channel Search 0x Digital Manual Tuning Antenna Settings Program Table Signal Information Automatic Service Update Off CA Module Not Inserted HBB TV Settings Select the line Source with w or A and press OK to confirm Select the input source Satellite with gt V or A and press OK to con firm Select the line Automatic Channel Search with w or A and press OK to confirm The menu appears Select the line Select Satellites with w or A and press OK to confirm The SELECT SATELLITE menu appears Select a satellite with v or A and press OK to confirm 7 Select the line Scan Mode with w or IAK Select the scan mode with or gt for unencrypted channels for encrypted channels only or both 8 Select the line Service Type w
80. r it may be necessary to leave the television set in standby mode for certain functions for example automatic switch on and switch off and for timer func tions m The television set uses less energy when the brightness is reduced Notes on still images Watching the same image for a long time on the screen may cause a still image remains feebly on the background Feeble image s on the back ground is originated from LCD LED technology and does not require any action under guaran tee To avoid such cases and or minimize the impact you may observe the tips below Do not allow the same TV channel to stay on the screen for a very long time Channel logos may cause this situation Do not allow the images which are not full screen to constantly stay on the screen if not streamed in full screen format by the broad caster you can convert the images to full screen by changing picture formats m Higher brightness and or contrast values will lead this impact to appear faster therefore you are recommended to watch your TV in the lowest brightness and contrast levels ENGLISH _7 CONNECTION AND PREPARATION Connecting the antenna and the power adapter 1 To receive digital satellite channels DVB S S2 connect the satellite antenna cable to the antenna socket SATELLITE on the tel evision set And or 2a To receive terrestrial digital broadcasters DVB T connect the cable for the rooftop or indoor antenn
81. r by pressing OK 4 Press W to select information on the next programme and A to return to the infor mation for the current programme 5 Select programmes on over the coming days with ee green and switch back to the cur rent day with e red 6 Switch back to the channel selection with Note m Filter for certain programmes with eeee blue select the channel type with gt V or A and press OK to con firm Programmes which match the selected channel type are displayed 7 Quit the electronic TV guide with EXIT TELEVISION OPERATION Changing the picture format Basic setting is 16 9 1 Select the picture format with gt The picture format for example 16 9 is displayed You can choose between the following picture formats Auto format The picture format is automatically switched to 16 9 for 16 9 programmes The picture format is automatically switched to 4 3 for 4 3 programmes 16 9 and 14 9 formats For programmes in 4 3 format the picture is stretched horizontally if the 16 9 format or 14 9 format is selected The picture geometry is stretched horizontally With actual 16 9 input sources from a set top box on the SCART socket the picture fills the screen completely and with the correct geometry 4 3 format The picture is shown in 4 3 format LetterBox format The letterb
82. r programmed timer recordings 1 Select the timer menu by pressing GUIDE 3 veee yellow and eeee blue in succes sion The SCHEDULED EVENTS menu ap pears Select the title of the programme to be deleted with W or A and delete the timer posi tion with eee yellow Press EXIT to close the menu ENGLISH 33 USB RECORDING Playback The recorded programmes whether started manually or using the timer function are stored on the external data medium Selecting a programme from the archive 1 Open the menu with MENU 2 Select the men item USB RECORDING with v or A and press OK to confirm 3 Confirm the menu item PRnP Archiv with OK button The menu appears 4 Select the programme of your choice with W or A and start playback with gt 5 Press fill to end playback The television switches over to the current television channel Forward reverse picture search 1 During playback select the fast forward speed 2x 4x 8x 16x or 32x with DP or during playback select the rewind speed 2x 4x 8x 16x or 32x with 44 the pic ture freezes when rewinding Repeating a scene A B You can mark the starting and ending point of a scene The scene is then repeated continuously 1 Mark the starting point A by pressing D gt at the required scene during playback This scene is marked as the st
83. reen or press e red to continue the recording Presetting programmes to be recorded using the electronic TV guide You can use data from the electronic TV guide for recording 25 programmes can be preset for the timer recording or as a reminder 1 Press GUIDE to display channel informa tion The electronic TV guide appears 2 Select the preferred channel with w or A 3 Switch to the information about the current programme with gt 4 Select the programme of your choice with VW or A 5 Confirm the programme with E lt The symbol appears after the name of the programme and the data has been added to the timer 32 ENGLISH Note E If the data for the recording is to be changed use eee yellow and eeee blue to switch to the SCHEDULED EVENTS press ee green change the data and save it with ee green 6 Press EXIT to exit the menu Notes m Before the timer recording begins a warn ing message appears with a 20 second countdown You can switch over to the pro grammed television channel m If the timer recording starts during playback playback is not interrupted Recording takes place automatically in the background as long as you do not select Yes when the timer countdown message is shown Note for UPC customers only When a pro gram is recorded it can happen that a part of the previous or next program is inclu
84. ress TXT to switch on teletext 2 Press 1 O to select teletext pages directly Return to teletext page 100 with 3 Go back a page with w 4 Goto the next page with A 5 Quit teletext with TXT Additional functions Skipping the waiting time While a page search is progressing you can switch to the TV programme 1 Enter the teletext page number with 1 0 and then press P As soon as the page is found the page number is displayed 2 Press gt to switch to the teletext page Enlarging the character height If you have difficulty reading the text on the screen you can increase the character height 1 To enlarge the character height of a teletext page keep pressing 4 Page hold A multiple page may contain several sub pages which are automatically scrolled by the broad casting station 1 Stop the automatic scrolling of the sub pages with dde 2 Quit the function with 4d Opening a sub page directly If the selected teletext page contains additional pages the number of the current sub page and the total number of pages are displayed 1 Press k to open the sub page function 2 Use or gt to select the sub page 3 Quit the function with Revealing answers Certain teletext pages contain hidden answers or information 1 Display information with PP 2 Press to conceal the information Split screen This functi
85. rred mode Oncex Every Day or Weekly with or gt Select the line Start Start recording with V or A and enter the date time with 1 0 Select the line End Stop recording with V or A and enter the date time with 1 0 Save the data with ee green The programme is preset Press EXIT to exit the menu Notes m Before the timer recording begins a warn ing message appears with a 20 second countdown You can switch over to the pro grammed television channel m If the timer recording starts during playback playback is not interrupted recording takes place automatically in the background as long as you do not select Yes when the timer countdown message is shown Editing recording data in the timer menu You can edit the data for programmed timer recordings 1 Select the timer menu by pressing GUIDE veee yellow and eeee blue in succes sion The SCHEDULED EVENTS menu ap pears 2 Select the title of the programme to be changed with w or A and activate the timer position with e green The input menu is displayed 3 Select the required option with v or A and edit the data with 1 0 and or gt 4 Save the changes with ee green The timer has been changed 5 Press EXIT to close the menu Deleting recording data in the timer menu You can delete the data fo
86. s displayed 3 Delete the old name FAV1 for this purpose select with W A and gt the push button and delete the character with OK 4 Select the required character numeric with V A and gt and confirm with OK Repeat the procedure for further characters numerics Select Caps for uppercase and lower case and confirm with OK Select Shift for numbers and symbols and confirm with OK 5 Confirm the new name select the push button Enter with W A or gt and confirm with OK 6 Press EXIT to end the seting SETTINGS Picture settings Notes 1 Open the menu with MENU m You can only select the Mpeg NR function 2 Select the menu item PICTURE SETTINGS with w or A and press OK to confirm The PICTURE SETTINGS menu appears O PICTURE SETTINGS Basi Picture Mode User Brightness 50 Contrast 100 Sharpness 75 Colour 65 Medium Colour Temperature Medium on digital and AV presets Mpeg NR reduces any interference from artefacts pixel blocks from digital programmes due to MPEG compression such as from DVB T receivers or DVD players m The Film Mode detects and processes feature films automatically for all channel sources This means you will always receive an optimal picture This functions in the modi 480i 576i and 1080i in TV playba
87. sion channels in the chapter Special functions starting on page 61 m Further settings for digital television chan nels after the initial setup can also be found in the chapter Special Settings starting on page 55 Note m Make the language and country selection for all types then continue reading the respective chapter 14 ENGLISH Selecting language country and operating mode 1 Switch on the television set from standby with O 1 0 or P or P During initial set up the Installation Guide will be displayed Help m lf this menu is not displayed restore the television set to its default settings see page 46 2 Select the menu language with gt V or A and press OK to confirm 3 Select the mode with or gt and press OK to confirm The settings used in Home Modex help to save energy Alternatively the menu item Shop Mode can be selected which the retailer can use for demonstrating the device functions Note m End the Shop Mode by restoring the televi sion set to its default settings see page 46 4 Select the country in which the television set is operated with gt W or A and press OK to confirm The Source Setup menu appears with the Connection Typex line marked Note m You can find a description of how to tune the television channel of your choice de pending on the a
88. supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna Select the Active Antenna Power with w or A Switch on the antenna power supply for the antenna with or gt On Select the line Automatic Channel Search with w or A and press OK to confirm The menu appears SOURCE SETUP ner AUTOMATIC CHANNEL SEARCH oma Connection Type Air Country UK Scan Type l DTV amp ATV 60 ENGLISH 6 Select the line Scan Typ with w or A and set the option DTV with or gt 7 Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Reults menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PROGRAM TABLE appears Note mYou can abort the search by pressing EXIT 8 Press EXIT to end the setting Automatic service update If this function is activated possible changes of network operators are updated automatically
89. t on the PC using xe a VGA cable video signal 2 Connect the Audiox socket on the televi oe sion to the corresponding socket on the PC Ea Auto Ajust using a suitable cable audio signal EEK Note Auto Ajust Mode On m Adjust your PC to the monitor for example Position 50H 50V picture resolution 1280 x 768 picture fre Size o quency 60 Hz 4 Phase 30 Selecting presets for the PC 1 Press f gt and use V A or gt to select the preset PC and press OK to confirm Options Settings for PC mode Auto Ajust for automatic PC configura 1 Open the menu with MENU tion 2 Select the line xSOURCE SETUP item with a fan eal cote a a V or A and press OK to confirm 2 One if ihe contiguration stave Se impie mented automatically in PC mode The SOURCE SETUP menu appears e TI i Position to configure the horizontal and 3 Select the function or setting with v or vertical picture position A and then use V A or gt to Size to set the cycle frequency implement it Phase to eliminate flicker unfocused pictures or horizontal interference 4 Press EXIT to end the setting ENGLISH 53 OPERATION WITH A COMMON INTERFACE___ What is a Common Interface m Common Interface Cl is an interface for DVB receivers m Encrypted channels can only be viewed with a CA module suitable for the encryp
90. ta medium is con nected Ends playback of a programme from an external data medium ends a recording or playback in time shift mode splits the screen in teletext Selects different audio languages only for digital television chan nels Selects different subtitles only for digital television chan nels ENGLISH 13 SETTINGS Initial set up and tuning television channels The television set is equipped with automatic channel search which searches for satellite channels DVB S S2 terrestrial channels DVB T cable channels DVB C and analogue chan nels You start the search and the television channels will be stored into the different Program Tables Following you can sort the channels in the Pro gram Tables The various settings Depending on the type of antenna connected you can decide which channels you would like the television to search for DVB S S2 Tunes digital television channels from the satellite from page 15 You have two options for this search the basic installation which presets a stand ard selection e g the satellite Astra 19 2 East you need only start the search the professional installation which allows you to make all required settings and set pa rameters for your receiver system m DVB T Tunes digital terrestrial television channels on page 17 m DVB C Tunes digital television channels from the cable provider on page 17 m Tunes analogue televi
91. tching signal 0 22 kHz 650mV 250mVpp DiSEqC 1 0 operation 1 1 operation 1 2 operation Digital reception ranges Satellite Ku band 10 700 MHz 12 750 MHz Modulation DVBS QPSK DVBS2 QPSK 8 PSK IF band 950 MHz 2 150 MHz Signal level 25dBm to 65 dBm Cable Overall band 110 MHz 862 MHz Modulation 16QAM 32QAM 64QAM 128QAM and 256QAM Symbol rate 4 0 Msym s to 7 4 Msym s Terrestrial DVB T VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size 2k 8k Modulation 16QAM 64QAM QPSK Guard Interval 1 4 1 8 1 16 1 32 Terrestrial DVB T2 VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size Modulation 1k 2k 4k 8k 16k 32k 16QAM 64QAM 256QAM QPSK Guard Interval 1 4 19 256 1 8 19 128 1 16 1 32 1 128 As this feature is optional it is not available in all products Analogue reception ranges C02 C80 special channels SO1 41 Preset channels All Channels 6000 Satellite DVB S S2 1000 Cable DVB C or 99 Analogue 1000 Terrestrial DVB T or 99 Analogue 8 AV 2 USB Weight approx 6 75 kg Dimensions WH D 92 4 cmx 56 1 cm x 7 3 cm Technical changes and errors reserved ENGLISH 65 INFORMATION Service information for dealers The product complies with the following EU directives and regulations 2006 95 EC Directive on the harmonisation of the laws of Member States re lating to designed for use within certain voltage limits 2004 108 E
92. ter the time with 1 0 8 Save the data with ee green Note m You can abort the entry by pressing red Q Press EXIT to end the setting Switch off timer In the Auto Off menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Auto Off with w or A and press OK to confirm 2 Select the line Mode with W or A and use or gt to set the preferred mode 3 Select the line Set Hour with w or A and enter the time with 1 0 4 Save the data with e green Note m You can abort the entry by pressing e red 5 Press EXIT to end the setting Automatic switch off Auto Sleep If this function is activated the television switches automatically to standby after 5 minutes if no video signal is broadcast or in accordance with the according to European regulations the tel evision switches automatically to standby after 4 hours provided that none of the buttons on the remote control or on the television is operated during this period 1 Select the line Auto Sleep with w or A 2 Enter the switch off time with or gt Note m To switch off the function use or gt to select the setting Off 3 Press EXIT to end the setting 44 ENGLISH Parental control settings Authorising programmes
93. th green oder this can easily take a few minutes Il gt veee yellow The search is complete as soon as the PRO GRAM TABLE appears Notes m The current system is displayed in the Select Band by pressing W or A and use or gt to choose between S special channel or C normal channel Note System line If the colour or sound is mYou can abort the search by pressing not functioning properly select the line EXIT System with W or A Use or gt to select the preferred setting m If fine tuning is necessary select the line Fine Tuning with W or A and use or gt to make the setting 7 Press EXIT to end the setting 7 Press eeee blue to save the setting 62 ENGLISH SPECIAL SETTINGS Note m f you wish to remedy other television channels repeat steps 4 to 7 8 Press EXIT to end the setting Changing stored analogue channels If channels were stored with the automatic chan nel search while tuning the television channels you can delete them You can also store chan nels in a different preset change or enter the name of a channel as well as skip channels Selecting a channel list 1 Open the menu with MENUK 2 Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Program Table with w
94. to confirm Confirm the line Select Satellite with OK and select the preferred satellite with v A or gt Start the scan with e red Continue the adjustment by step 7 of the chapter Note m Before recording HD channels please check signal quality and Strength see chapter Displaying signal information on page 64 If the level is displayed in green you can record HD channels without any problems SETTINGS Tuning terrestrial television channels DVB T 1 In the Source Setup menu in the Connec tion Typex line select the option Air with or gt Select the line Scan Type with w or DAK Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Caution m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna Select the line Active Antenna Power with W Or AA Switch on the antenna power supply for the antenna with or gt On Start the scan with ee green The Search Results menu appears and the search for
95. vant positions using or gt buttons SPECIAL SETTINGS Notes m Use installation equipment supported suggested by your Multiswitch m Other users receivers connected to the system may be affected if the specified user band number and frequency is changed during installation m User band and User band frequency is specified on the Multiswitch used and each user receiver uses a specified user band and user band frequency With SCR satellite system auto search by several users receivers at the same time may cause problems 22 KHz Depending on the LNB type 22 kHz audio is selected For a univer sal LNB this option is set to Auto and cannot be changed DISEqC mode and LNB selection depending on the type of antenna used use or gt select the option Off DISEqC 1 0 or DiSEqC 1 1 Off for a satellite system with only one antenna DiSEqC 1 0 allows up to four satel lites to be received simultaneously Under LNB selections use or gt to select the option 1 4 2 4 3 4 or 4 4x DISEqC 1 1 allows up to 16 satel lites to be received simultaneously Under LNB selection use or gt to select the option 1 16 to 16 16 5 Press EXIT to end the setting Settings for motorised antennas DiSEqC 1 2 Your television set supports motorised satellite systems in compliance with DiSEqC 1 2 T

Grundig 40 VLE 5421 BG 40" Full HD Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Grundig 40 VLE 5421 BG 40&quot; Full HD Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Grundig 40 VLE 5421 BG 40" Full HD Black