Lenco BT-125 loudspeaker
Contents
1. by qualified service personnel when A Objects have fallen into or liquid has been spilled into the enclosure 2 B The unit has been exposed to rain C The unit has been dropped or the enclosure damaged D The unit exhibits a marked change in performance or does not operate normally 12 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Care and Maintenance Do not subject the unit to excessive force shock dust or extreme temperature Do not tamper the internal components of the unit Clean your unit with a damp never wet cloth Solvent or detergent should never be used Avoid leaving your unit in direct sunlight or in hot humid or dusty places Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors Resetting the unit If the unit experiences a power surge or electric shock it is possible that the internal micro controller may lock up and the unit will not respond to any commands from the panel controls 1 In this event unplug and then reconnect the AC mains power plug into the wall outlet 2 Use a straightened paper clip toothpick or similar objects to press the RESET button located at the rear of the main unit see the below figure RESET button Caution Do not use a sharp2. pointed object to press the reset button It may damage the reset switch inside the unit Features Thank you for purchasing the BT 125 3D sound speaker with Bluetooth This model incorporates following features Playback mobile device like Apple devices smart phones or tablet music through Bluetooth technology NFC Near Field Communication function for easy Bluetooth connection Audio line in AUX for connecting other digital audio player Built in 6 High Fidelity Speakers and incorporated wave field synthesis WFS technology to produce 3D sound effect Built in subwoofer for heavy bass effect USB connector for charging smart phone battery iPhone iPod iPod mini iPod nano iPod touch iPod classic and iPod shuffle are trademarks of Apple Inc registered in the U S and other countries 3 Apple devices like iPad iPhone iPod smart phones and or tablet are not included eneaoap o 10 RESET button 12 13 11 Front View 23 4 Description of parts Rear View 7 8 9 1011 Six wave field synthesis WFS speakers NFC sensor FUNC button VOLUME button POWER button Status LED indicator AC socket USB connector AUX IN jack PAIRING button Subwoofer Bass Reflex Opening AC Power Connection The NFC Near Field Communication sensor located at middle top of the unit The function button press to select Bluetooth or AUX IN mode Adjust volume level up or do
3. Lenco Important safety instructions When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 10 11 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a set basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block the ventilation openings The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings minimum distances 30 cm around the apparatus for sufficient ventilations Heat amp flame The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat No naked flame sources such as lighted candles should be p
4. R gy button to turn on the unit Press the FUNC button to select Bluetooth mode The blue Status LED indicator will blink fast whilst the unit is searching nearby Bluetooth device From the mobile device turn on its Bluetooth function and it will also search for the nearby Bluetooth device as well From the Bluetooth device list of your mobile device tap on Bluetooth device name Lenco of this model for the connection Once the mobile device is connected with the unit the blue Status LED indicator light steadily Now you can playback Bluetooth music see section Playback Bluetooth music below C Bluetooth pair connect other mobile device In case you would like to pair connect other mobile device 1 Press the PAIRING button which located at rear of the unit and enter the pairing mode 2 It will search nearby Bluetooth device and the blue Status LED indicator blinks fast 3 Turn on the mobile device s Bluetooth function and select the Bluetooth device Lenco for the connection After the successful connection the blue Status LED indicator will light steadily 5 Now you can playback Bluetooth music see section Playback Bluetooth music below Playback Bluetooth music 1 2 3 After Bluetooth communication link is set up run the music player App from the mobile device then playback the mobile device music You may adjust both the volume control of your mo
5. bile device and the volume control of this unit to find the most desirable volume setting From the mobile device you may press a the H button to Play Pause Bluetooth music b the PPI HM button to skip tracks forward backward Note Whilst the blue Status LED indicator blinks 3 minutes fast the unit is searching mobile device for pairing Whilst the blue Status LED indicator blinks slowly it means that the Bluetooth communication disconnected or after the 1 three searching minutes To establish the Bluetooth connection implement the 3 approaches A B or C mentioned in above sections Energy Saving Note In Bluetooth mode if the Bluetooth communication link disconnected for around 30 minutes the unit will go into standby mode automatically Listening to an external audio source 1 Connect an audio cable with 3 5mm stereo plug from an auxiliary audio device to the AUX IN jack of the unit 2 Press the POWER y button to turn on the unit 3 To select auxiliary audio input press the FUNC button and the green status LED indicator will blink for around 5 seconds then lights steadily Turn on the external auxiliary audio device 5 The volume can now be controlled through the unit Operate all other functions on the external device as usual gt Notes a Press the POWER gy button to turn off the unit when you finish listening Don t forget to switch off the power of the external audio de
6. ee a crossed out wheeled waste container on the product it means that E the product is subject to the EU directive 2002 96 EC This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe To ensure the correct waste treatment of the product and battery please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries By doing so you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste Waste Electrical and Electronic Equipment Directive Wifi amp Bluetooth Hereby STL Group declares that this BT 125 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at service lenco eu For information and support www lenco com
7. laced on the apparatus Power source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Where the AC mains power cord is used as the disconnect device the disconnect device shall remain readily operable Power cord protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet Cleaning The unit should be cleaned only as recommended See the section Care and Maintenance of this manual for cleaning instructions Object and liquid entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the unit It shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Attachments Do not use attachments no recommended by the product manufacturer Lightning and power surge protection Unplug the unit from the wall outlet and disconnect the periods of time This will prevent damage to the product due to lightning and power line surges Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire of electric shock Damage requiring service This unit should be serviced
8. mation www lenco com For support http lencosupport zendesk com Lenco helpdesk Germany 0900 1520530 Local charges The Netherlands 0900 23553626 Local charges 1ct p min Belgium 02 6200115 Local charges The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM When contacting Lenco you will always be asked for the model and serial number of your product The serial number can be found on the back of the device Please write down the serial number below Model BT 125 Serial number Lenco offers service and warranty in accordance to European law which means that in case of repairs both during and after the warranty period you should contact your local dealer Important note It is not possible to send products that need repairs to Lenco directly Important note If this unit is opened or accessed by a non official service center in any way the warranty expires This device is not suitable for professional use In case of professional use all warranty obligations of the manufacturer will be voided Notice statements and information Lenco is not liable for printing errors in the manual The specifications and external appearance of the set are subject to change without prior notice Declaration of Conformity Low Voltage Directive 2006 95 EC issued by the European Commission of the C Products with a CE marking comply with the EMC directive 2004 108 EC and the European Community When you s
9. vice as well b If there is without any music signal presented at the AUX IN input jack for around 10 minutes the unit will turn into standby mode automatically Charging smart phone mobile device battery The unit incorporated an USB port with DC 5V 1000mA Max output which provides a way for you to charge mobile device s battery You can connect a mobile device like Apple devices smart phones or tablet to the USB connector of the unit Once the AC mains power is connected and it will charge the mobile device battery 3D Sound effect sonic O emotion ABSOLUTE 3D This model integrated sonic emotion 3D sound technology which uses WFS wave field synthesis to create the illusion of sounds all around Any input even stereo can be used including the iPhone iPad iPod Touch Smart phone Bluetooth streaming music or Aux in music being in stereo by using WFS from sonic emotion the 3D sound effect can create a virtual sound field where you can enjoy the finest audio no matter where you are in the room from a single device Sonic emotion and Sonic Emotion 3D sound are registered trademarks of sonic emotion ag the Technical Data Power Supply for the unit AC 100 240V 50 60Hz USB connector USB power source output DC 5V Maximum 1000mA for charging external appropriate mobile device battery Speaker Output Total 15W x 6 35W Max Operating temperature 0 35 degree C and Humidity 70 Service and support For infor
10. wn Turn the unit on or off Power supply to the unit Power source DC 5V 1000mA for charging mobile device battery only Auxiliary audio signal input Press to enter Bluetooth pairing mode For resetting the unit This opening should never be blocked otherwise the bass effect will be reduced Installation 1 Connect the power cord plug to the AC socket located at rear of the unit 2 Firmly and securely plug the AC mains plug into AC mains outlet Bluetooth operation The unit plays from mobile devices like iPad iPhone iPod Touch Smart phone and tablet music through Bluetooth operation It also incorporated NFC Near Field Communication function for easy connection with a mobile device which also has the NFC function A NFC Bluetooth pairing connection 1 2 3 a Press the POWER gy button to turn on the unit Press the FUNG function button to select Bluetooth mode where the blue Status LED indicator blinks fast Unlock the mobile device then place it incorporated NFC function on top of the NFC sensor area The mobile device will pair and connect with this model automatically Note The Bluetooth device name of this model Lenco After successful connection the blue Status LED indicator will light steadily Now you can playback Bluetooth music see section Playback Bluetooth music below B Manual Bluetooth pairing connection 1 2 3 Press the POWE
Download Pdf Manuals
Related Search