OSD Audio OS790 loudspeaker
Contents
1. value and performance In such cases some modifications to the mounting may be necessary and are not OSD s responsibility For this warranty to apply the unit must be installed and used according to its written instructions If necessary repairs must be performed by OSD The unit must be returned to OSD at the owner s expense and with prior written permission Accidental damage and shipping damage are not considered defects nor is damaged resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD OSD Audio sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service Any OSD product purchased from an unauthorized dealer or other source including retailers mail over dealers and online sellers will not be honored or serviced under existing OSD warranty policy Any sale of product by an unauthorized source or other manner not authorized by OSD shall void the warranty on the applicable product Damage to or destruction of components due to application of excessive power voids the warranty on those parts In these cases repairs will be made on the basis of the retail value of the parts and labor To return for repairs you must email customer service at RMA osdaudio com for a Returned Merchandise Authorization RMA number then the unit must be shipped to OSD at the owner s expense along with a note explaining the nature of se2. OSD 05790 AUDIO Amplifier and Receiver Consideration The omni speakers should be powered by an amplifier or receiver that provides a minimum of 10 watts per channel Optional Accessories Outdoor Volume Control HD OVC300 Tools needed for installation Spade or trench tool Direct burial rated speaker cable TOA asenaa saath vis tsduadd csasiscancsanensnneaes rata ateeeeia ides actin cancieewtndetd 100 ft 14AWG savossoecssseesseesrees 00 Or ft e E PTE EE ANE PEE EEEE cies 150 200 ft Specifications Design All weather proof in ground omni 360 sound speake with teflon sealed internal cabinetry and driver Tweeter 1 mylar whizzer cone Woofer 8 black polypropylene cone Frequency Response 42 Hz 20 kHz Power Handling 200W Finishes Green Impedance 8 Ohm Sensitivity 88 dB Dimensions H12 xL13 xW 12 Gross Shipping Weight 18 Ibs Unit of Measure 1 piece Warranty 1 year The Technical Support Center at OSD Audio is available between the hours of 8 30 AM 5 30 PM PST Monday through Friday excluding holidays Warranty amp Repair All OSD Audio speaker products have 1 year Limited Warranty against defects in materials and workmanship Proof of purchase must accompany all claims During the warranty period OSD will replace any defective part and correct any defect in workmanship without charge for either parts or labor OSD Audio may replace returned speakers with a product of equal
3. he amplifier or receiver Please make sure the polarity on the cables and the speakers are in sync Optional Using an outdoor volume makes it convenient to adjust the volume outside Step 6 Turn on your amplifier or receiver to test the speakers If the speakers are operating properly refill the wire trench and cover the submerged part of the speaker OSD AUDIO 775 Columbia St Brea CA 92821 www osdaudio com Tel 888 779 4968 Fax 714 256 8300
4. rvice required Be sure to pack the speaker s in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit This Warranty Does Not Cover Damage caused by abuse accident misuse negligence or improper operation installation Any products that have been altered or modified Any product whose identifying number of decal serial etc has been altered defaced or removed Normal wear and maintenance Installation Instructions 360 in ground speaker Receiver Amp Step 1 Evaluate the location of the speakers Project the length of speaker wire you will run Note when purchasing additional speaker direct burial grade is strongly recommended Omni speakers reproduce sound in a full 360 degree and a few speakers will cover a large area with sound if properly placed and spread out Step 2 Once you have decided on the locations for your in ground speakers dig a trench about 5 leading from the speakers to the input source for the speaker cables For the omni speaker dig a trench hole approximately 14 in diameter and 6 deep for the speaker enclosure Step 3 Place the omni speaker in the hole you have dug Run the direct burial wire through the trench to the location of the amplifier or receiver Please note When connecting the additional wire be sure to use water tight wire connectors Step 4 Connect the wires from the omni speakers to t
Download Pdf Manuals
Related Search