LG NB3540
Contents
1. pepyers Bue MS Q Note x To detach the unit perform it in reverse order Note a Screws A and Wall Plugs are not supplied for mounting the unit We recommend the Hilti C A Caution HUD 1 6 x 30 for the mounting Do not install this unit upside down It can damage the parts of this unit or be the 5 Putthe unit on the brackets to match screw cause of personal injury holes on the bottom of the unit Do not hang onto the installed unit and avoid any impact to the unit Secure the unit firmly to the wall so that it does not fall off If the unit falls off it may result in an injury or damage to the product When the unit is installed on a wall please make sure that a child does not pull any of connecting cables as it may cause it to fall NB3540 NB DGBRLLF ENG indd 11 e 2014 07 14 KX 2 10 59 12 Connecting Connecting the AC Wireless subwoofer adapter connection 1 Connect the supplied AC power cord to the AC adapter LED indicator of wireless subwoofer 2 Connect the AC adapter cable to DC IN adapter input LED Color Status 3 Plug the AC power cord into an AC outlet Yellow green The connection is trying Blink Yellow green The connection is completed Red The wireless subwoofer is in standby mode or the connection is failed Buu2euuoj Off No The power cord of wireless display subwoofer is disconnected Settin2. LG Life s Good HSI1ON3 OWNER S MANUAL 2 1 ch Sound Bar Please read this manual carefully before operating your set and retain it for future reference FOR THE GUARANTEE TERMS amp CONDITIONS PLEASE REFER TO INNER PAGE OF BACK COVER NB3540 NB3540 S34A2 D TETTE 0 ia NB3540 NB DGBRLLF ENG indd 1 e 2014 07 14 BB 2 10 47 peuejs Buiyjes EN 2 Getting Started Safety Information A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE CAUTION The apparatus shall not be exposed to water dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus NB3540 NB DGBRLLF ENG indd 2 WARNING Do not install this equipment in a
3. Change Audio DRC setting on Player setup menu to O hem DIO DIGITAL OUT setting FF state Buljooysejqnoy EN NB3540 NB DGBRLLF_ENG indd 28 2014 07 14 X 2 11 04 Appendix 29 Trademarks and licenses DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories amp dts 2 0 Channel For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS 2 0 Channel is a trademark of DTS Inc DTS Inc All Rights Reserved O Bluetooth Bluetooth wireless technology is a system which allows radio contact between electronic Connecting individual devices under Bluetooth wireless technology does not incur any charges A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by LG Electronics is under license Other trademarks and trade names are those of their respective owners NB3540 NB DGBRLLF_ENG indd 29 Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials If you need to ship the unit for maximum protection re pack the
4. No display The DISPLAY OFF function is activated Press SLEEP repeatedly to cancel the function Refer to the page 18 The remote control does not work The remote control is too far from the unit Operate the remote control within about 7 m There is an obstacle in the path of the remote control and the unit Remove the obstacle ly PreReny The batteries in the remote control is exhausted Replace the batteries with new one The AUTO power Check connection of the external device such as TV DVD Blu Ray player or function does not Bluetooth device work Depending on the connected device this function may not operate Check whether your LG TV supports LG Sound Sync LG Sound Sync does Check connection of LG Sound Sync Optical or wireless not work Check sound setting of your TV and this unit NB3540 NB DGBRLLF ENG indd 27 Buuoousejqnou IPS 2014 07 14 X 2 11 04 28 Troubleshooting PROBLEM CAUSE amp CORRECTION When you feel the output sound of the unit is low Check the details below and adjust the unit according to Switch ON state of DRC function to OFF by using remote controller With the sound bar connected with TV change the AU on TV Setup Menu from PCM to AUTO or BITSTREAM AUDIO DIGITAL OUT PASS THROUGH or With the sound bar connected with Player change the setting on Player Setup Menu from PCM to PRIMARY BITSTREAM
5. Release the D TV Power button to complete setting Depending on your TV some or all buttons may not function on the TV even after entering the correct manufacturer code When you replace the batteries of the remote the code number you have set may be reset to the default setting Set the appropriate code number again 2014 07 14 X 2 11 04 Troubleshooting 27 Troubleshooting PROBLEM The unit does not work properly CAUSE amp CORRECTION Turn off the power of this unit and the connected external device TV Woofer DVD player Amplifier etc and turn it on again Disconnect the power cord of this unit and the connected external device TV Woofer DVD player Amplifier etc and then try connecting again The power cord is unpluged Plug in the power cord No Power Check the condition by operating other electronic devices Incorrect input source is selected Check the input source and select the correct input source The mute function is activated No sound Press MUTEX or adjust the volume level to cancel the mute function When you are using connection with a external device set top box Bluetooth device etc adjust volume level of the device No woofer sound The power cord of the subwoofer is not connected Plug the power cord into the wall outlet securely Pairing between the unit and the subwoofer gets disconnected Connect the unit and the subwoofer Refer to the page 12
6. W twice in a row Card readers 2 Remove the USB device from the unit Locked devices Hard type USB devices Compatible USB devices USBhub MP3 Player Flash type MP3 player Using USB extension cable USB Flash Drive Devices that support USB 1 1 iPhone iPod iPad The USB function of this unit does not support Android device some USB devices NB3540 NB DGBRLLF ENG indd 15 D 2014 07 14 KA 2 11 01 16 Connecting Playable file 9 Note gt Sampling Freau nc Folders and files on the USB are recognized po TEN y as below MP3 within 32 to 48 kHz WMA within 32 to 48 kHz C3 Folder OGG within 32 to 48 kHz D File FLAC within 32 to 192 kHz WAV within 32 to 48 kHz l JO 2 Bitrate DO MP3 wi hin 80 to 320 kbps DO 9 WMA within 56 to 128 kbps 2 OGG within 50 to 500 kbps 6 JDO i FLAC within 500 to 5000 kbps a WAV within 500 to 5000 kbps f DO JO ee Jo A protected file by DRM Digital rights management cannot be played on the unit J Video files in the USB storage device can not be Jo played DO e Depending on the performance of your USB device playback may not work well If there is no file in a folder the folder will not appear File will be played from file AO to file one by one Files and folders will be presented in order recorded and may be presented differently depending on the record circumstances e This unit can display file or folder names tha
7. closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the appliance To disconnect power from the mains pull out the mains cord plug When installing the product ensure that the plug is easily accessible NOTICE For Product Identification and Compliance Safety labeling information please refer to Main Label on the bottom of Unit 2014 07 14 X 2 10 50 Getting Started 3 This device is equipped with a portable battery or accumulator Disposal of waste batteries accumulators equipment Remove the old battery or battery pack follow the steps in reverse order than he assembly To prevent contamination of the environment and bring on possible threat to Safety way to remove the battery from the K 1 he battery put it in the appropriate container at designated collection points Do not dispose of batteries or battery together with other waste It is recommended that you use local ree reimbursement systems batteries and o excessive heat such as sunshine fire or the like Disposal of your old appliance 1 When this crossed out wheeled bin symbol is attached to a product it means the product is covered by 4 he European Directive 2002 96 EC 2 Allelectrical and electronic products should be disposed of separately rom the municipal waste stream appointed by the government or he local authorities 3 The correct disposal of your
8. confined space such as a book case or similar unit CAUTION Do not block any ventilation openings Install in accordance with the manufacturer s instructions Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating The openings shall be never be blocked by placing the product on a bed sofa rug or other similar surface This product shall not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instruction has been adhered to CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit That is a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits Check the specification page of this owner s manual to be certain Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates damage or deterioration unplug it discontinue use of the appliance and have the cord replaced with an exact replacement part by an authorized service center Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched
9. device and play your music This function turns on or off each time you press AUTO POWER Note e After the unit is turned on by AUTO POWER unction it will be automatically turned off if here is no signal for a certain period of time rom the TV connected by LG Sound Sync Optical Wireless e After the unit is turned on by AUTO POWER unction it will be automatically turned off if here is no signal for a certain period of time rom the external device e If you turned off the unit directly it cannot be turned on automatically by AUTO POWER unction However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal Depending on the connected device this unction may not operate e If you disconnect Bluetooth connection by this unit some Bluetooth devices try to connect to the unit continually Therefore it is recommended to disconnect the connection before turn off the unit NB3540 NB DGBRLLF ENG indd 19 Auto function change This unit recognizes input signals such as optical Bluetooth and LG TV and then changes suitable function automatically When optical signal comes in When you turn on the external device connected to this unit by an optical cable this unit change the function to optical You can hear the sound from your device When you try to connect Bluetooth device When you try to connect your Bluetooth device to this unit Bluet
10. display various information of the input source by pressing INFO USB File information contained on a USB MP3 WMA OGG FLAC WAV OPTICAL Audio format Audio channel Sleep timer setting Press SLEEP repeatedly to select the desired time period options in minutes DISPLAY OFF display window will turns off gt DIMMER display window will be darkened by half gt Sleep timer value gt Display on To check the remaining time press SLEEP To cancel the sleep function press SLEEP repeatedly until 1OMIN appears and then press SLEEP once again while 10MIN is displayed Note You can check the remaining time before the unit turns off Press SLEEP the remaining time appears in the display window Auto power down This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes So does this unit after six hours since Main unit has been connected to other device using analog input 2014 07 14 MM 2 11 02 Operating 19 AUTO POWER On Off This unit automatically turns on by an input source Optical LG TV or Bluetooth When you turn on your TV or an external device connected to this unit this unit recognizes the input signal and select the suitable function You can hear the sound from your device If you try to connect your Bluetooth device this unit turns on and ready to pair Connect your Bluetooth
11. interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms Connecting individual devices under Bluetooth wireless technology does not incur any charges A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology Available Devices Mobile phone MP3 Laptop PDA etc Bluetooth Profiles In order to use Bluetooth wireless technology devices must be able to interpret certain profiles This unit is compatible with following profile A2DP Advanced Audio Distribution Profile NB3540 NB DGBRLLF_ENG indd 22 Listening to music stored on the Bluetooth devices Pairing your unit and Bluetooth device Before you start the pairing procedure make sure the Bluetooth feature is turned on in to your Bluetooth device Refer to your Bluetooth device s user guide Once a pairing operation is performed it does not need to be performed again 1 Select the Bluetooth function by using FUNCTION on the remote control or F on the unit until the function is selected Appears BT and then READY in display window 2 Operate the Bluetooth device and perform the pairing operation When searching for this unit with the Bluetooth device a list of the devices ound may appear in the Bluetooth device display depending on the type of Bluetooth device Your unit appears as LG SOUND
12. old appliance will help prevent potential negative consequences for the environment and human health 4 For more detailed information about disposal of your old appliance please contact your city office waste disposal service or the shop where you purchased the product NB3540 NB DGBRLLF ENG indd 3 e human and animal health the old battery or 2 accumulators The battery should not be exposed 3 via designated collection facilities 5 When this crossed out wheeled bin symbol is attached to batteries accumulators of Your product it means they are covered by European Directive 2006 66 EC This symbol may be combined with chemical symbols for mercury Hg cadmium Cd or lead Pb if the battery Contains more that 0 000596 of mercury 0 002 of cadmium or 0 004 of lead All batteries accumulators should be disposed separately from he municipal waste stream via designated collection facilities appointed by the government or he local authorities The correct disposal of Your old batteries accumulators will help o prevent potential negative consequences for the environment animal and human health For more detailed information about disposal of Your old batteries accumulators please contact Your city office waste disposal service or the shop where You purchased the product O c E J o n o w 3 0 a 2014 07 14 X 2 10 50 pepers Bue MEN 4 Getting Started Europe Notice C 019
13. per one unit and multi pairing is not supported Depending on the type of the device you may not be able to use the Bluetooth unction You can enjoy wireless system using phone P3 Notebook etc he more distance between the unit and he bluetooth device the lower the sound quality becomes Bluetooth connection will be disconnected when the unit is turned off or the bluetooth device gets far from the unit When Bluetooth connection is disconnected connect the bluetooth device to the unit again e When not connected the Bluetooth READY appears on the display window NB3540 NB DGBRLLF ENG indd 23 Using Bluetooth App Note Only Android OS is available to use LG Bluetooth Remote app with this unit About LG Bluetooth Remote App LG Bluetooth Remote app brings a suite of new features to this unit To enjoy more features you are recommended to download and install free LG Bluetooth Remote app Install LG Bluetooth Remote App onto Your Bluetooth Device There are two ways to install LG Bluetooth Remote App onto Your Bluetooth Device Install LG Bluetooth Remote App through QR code 1 Install LG Bluetooth Remote app through OR code Use the scanning software to scan the OR code 2 Tap an icon for installation 3 Tap an icon for downloading Note Make sure that your Bluetooth device is connected to the Internet Make
14. pressing FUNCTION on the remote control or F on the unit until the function is selected To directly select the OPTICAL function press OPTICAL on the remote control Listen to sound with 2 1 or 2 ch speaker 4 Press OPTICAL to exit from OPTICAL Function is retuned to previous one USB connection Connect USB memory device to the USB port on the back of the unit 58V 500mA USB E 4 CI 2014 07 14 X 2 11 01 Connecting 15 Connect a USB to the USB gender changer when USB device requirement the unit is mounted on the wall Devices which require additional program installation connected to a computer are not supported Do not extract the USB device while in operation Fora large capacity USB it may take longer than a few minutes to be searched To prevent data loss back up all data This unit is not supported when the total number of files is 1000 or more e The unit s USB Port cannot be connected to PC The unit can not be used as a storage device The exFAT file system is not supported on this For more information of playing files on a USB refer unit FAT16 FAT32 NTES systems are available to the page 17 Buu euuo IN Depending on some devices it may not available o recognize the followings on this unit External HDD Removing the USB Device from the unit 1 Choose a different function mode or press
15. sure that your Bluetooth device has a scanning software application If you don t have one download one from Google Android Market Google Play Store Buueiedo WA 2014 07 14 32 11 03 Buueisdo IIT 24 Operating Install LG Bluetooth Remote App through Google Android Market Google Play Store 1 Tap the Google Android Market Google Play Store icon 2 Inthe search bar type in the LG Bluetooth Remote and search it 3 Inthe search result list find and tap LG Bluetooth Remote to start downloading Bluetooth app 4 Tapan icon for installation Tap an icon for downloading Q Note Make sure that your Bluetooth device is connected to the Internet Make sure that your Bluetooth device is equipped with Google Android Market Google Play Store Activate Bluetooth with LG Bluetooth Remote App LG Bluetooth Remote app helps to connect your bluetooth device to this unit 1 Tap LG Bluetooth Remote app icon on the home screen to open LG Bluetooth Remote app and go to the main menu 2 Tap Setting and select the unit you want 3 If you want to get more information to operate tap Setting and Help NB3540 NB DGBRLLF ENG indd 24 7 e Q Note LG Bluetooth Remote app will be available in the software version as follow Android O S Ver 2 3 3 or later This unit does not support the multi pairing If this unit is already
16. unit as it was originally packed at the factory Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit Wiping with strong pressure may damage the surface Do not leave rubber or plastic products in contact with the unit for a long period of time Cleaning the unit To clean the player use a soft dry cloth If the surfaces are extremely dirty use a soft cloth lightly moistened with a mild detergent solution Do not use strong solvents such as alcohol benzine or thinner as these might damage the surface of the unit gt 5 E 2 E x 2014 07 14 X 2 11 05 30 Appendix Specifications General NB3540 AC adapter requirements Refer to the main label on the unit Power consumption Refer to the main label on the unit Available Digital Input Audio Sampling Frequency Dimensions W x H x D 770 x 35 x 75 mm Net Weight Approx 1 3 kg Operating temperature 5 C to 35 C 41 F to 95 F Operating humidity 5 96 to 90 96 Input Output OPT IN 3V p p Optical jack x 1 PORT IN 0 5 Vrms 3 5 mm stereo jack x 1 32 kHz 44 1 kHz 48 kHz 96 kHz USB Version 14 Bus Power Supply 5V 500 mA Amplifier Total 320W Front 80 W x2 4Q at 1 kHz 3 Subwoofer 160 W 3 Q at 80 Hz x THD 10 Wireless subwoofer S34A2 D Power requirements Refer to the mai
17. 7 LG Electronics hereby declares that this these product s is are in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC 2004 108 EC 2006 95 EC 2009 125 EC and 2011 65 EU Please contact to the following address for obtaining a copy of the DoC Declaration of Conformity Contact office for compliance of this product LG Electronics Inc EU Representative Krijgsman 1 1186 DM Amstelveen The Netherlands Please note that this is NOT a Customer Service contact point For Customer Service Information see Warranty Card or contact the dealer that you purchased this product Indoor Use Only RF Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body NB3540 NB DGBRLLF ENG indd 4 f POWER This unit operates on a mains supply of 100 240V 50 60Hz Wiring This unit is supplied with a BS 1363 approved main plug When replacing the fuse always use of the same rating approved to BS 1362 Never use this plug with the fuse cover omitted To obtain a replacement fuse cover contact your dealer If the type of plug supplied is not suitable for the mains sockets in your home then the plug should be removed and a suitable type fitted Please refer to the wiring instructions below Warning A mains plug removed from the mains lead of this unit must be destroyed A mains plug with bared wir
18. BAR XXX Note e XX XX means the last four digits of Bluetooth address For example if your unit has a Bluetooth address such as 9C 02 98 4A F7 08 you will see LG SOUND BAR F7 08 on your Bluetooth device Depending on the Bluetooth device type some device have a different pairing way Enter the PIN code 0000 as needed 3 When this unit is successfully connected with your Bluetooth device PAIRED will appear on he display window 4 Listen to music To play a music stored on your Bluetooth device refer to your Bluetooth device s user guide 2014 07 14 KA 2 11 03 Operating 23 Note When using Bluetooth technology you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance However it may not work well in the case below There is a obstacle between the unit and he bluetooth device There is a device using same frequency with Bluetooth technology such as a medical equipment a microwave or a wireless LAN device his unit supports Bluetooth auto pairing However it does not operate in the case below When you restart this unit When you return to Bluetooth function after using LG TV function The sound may be interrupted when the connection interfered by the other electronic wave You cannot control the Bluetooth device with this unit Pairing is limited one Bluetooth device
19. connected with other Bluetooth device disconnect that device and then try again If you use LG Bluetooth Remote app for operation there would be some differences between LG Bluetooth Remote app and the supplied remote control Use the supplied remote control as necessary Depending on the Bluetooth device LG Bluetooth Remote app may not work After connection of LG Bluetooth Remote app music may be output from your device In this case try connecting procedure again If you operate the other applications or change the settings on your Bluetooth device while using LG Bluetooth Remote app LG Bluetooth Remote app may operate abnormally When LG Bluetooth Remote app operate abnormally check your Bluetooth device and the connection of LG Bluetooth Remote app and then try to connect again Depending on the smart phone s operating system you have some differences for LG Bluetooth Remote operation If you select Bluetooth function after LG Bluetooth Remote app has been disconnected this unit and your Bluetooth device will be paired automatically but you cannot control this unit by LG Bluetooth Remote app To use LG Bluetooth Remote app reconnect the app Even though Bluetooth connection will be disconnected you can use LG Bluetooth Remote app when you change the function to the others except LG TV function 2014 07 14 32 11 03 Operating 25 Sound adjustment Adj
20. ction by using FUNCTION on the remote control or F on the unit until the function is selected You can see LG OPT on the display window if connecting normally between this unit and your TV NB3540 NB DGBRLLF ENG indd 21 With wireless connection 1 Turn on the unit by pressing 5 Power on the remote control 2 Select LG TV function by using FUNCTION on the remote control or F on the unit until the function is selected 3 Setup the sound output of TV to listen to the sound through this unit TV setting menu Sound TV Sound output LG Sound Sync Wireless PAIRED appears on the display window for about 3 seconds and then you can see LG TV on the display window if connecting normally between this unit and your TV Q Note x e f you turned off the unit directly by pressing b Power LG Sound Sync Wireless will be disconnected To use this function again you should reconnect the TV and the unit Details of TV setting menu vary depending on the manufacturers or models of your TV The device with Bluetooth wireless technology will be disconnected if Sound Sync function is selected LG Bluetooth Remote app you ve already connected is disconnected either Buueiedo W 2014 07 14 KX 2 11 02 Buueisdo a 22 Operating Using Bluetooth technology About Bluetooth Bluetooth is wireless communication technology for short range connection The sound may be
21. earch Skips Fast backward or Forward Searches for a section within a file W Stop Stops playback gt II Play Pause Starts playback Pauses playback SOUND EFFECT Selects a sound effect mode AUTO VOLUME Turns on and off the AUTO VOLUME mode WOOFER LEVEL Sets the sound level of woofer 0 to 9 numerical buttons Selects a file directly DRC Turns on or off DRC function SLEEP Sets the system to turn off automatically at a specified time TV Control buttons See page 26 e 2014 07 14 KX 2 10 56 8 Getting Started Front panel papes Bulog Display window N Remote sensor Standby LED It lights up in red on standby mode F Function Selects the function and input source Volume Adjusts volume level 5 Standby On Rear panel PORT IN 5V 500 mA OPT IN e lt gt USB 1 DC IN25V 2A 3 USB port 2 PORT IN Portable input 4 OPT IN Optical input NB3540 NB DGBRLLF_ENG indd 8 2014 07 14 X 2 10 57 Getting Started 9 Installing the sound bar You can hear the sound by connecting the unit to the other device TV Blu ray disc player DVD player etc Place the unit in front of the TV and connect it to the device you want Refer
22. er manual Setup the sound output of TV to listen to the sound through this unit TV setting menu Sound TV Sound output External speaker Optical Details of TV setting menu vary depending on the manufacturers or models of your TV Buu euuo5 IN 2014 07 14 X 2 11 00 6uo uuop 14 Connecting Optional equipment connection PORT Portable IN connection gt La EHE x Port n O F4 MP3 player etc Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices 1 Connect the portable player to the PORT Portable IN connector of the unit 2 Turn the power on by pressing D Power 3 Select the PORTABLE function by pressing FUNCTION on the remote control or F on the unit until the function is selected 4 Turn on the portable player or external device and start playing it NB3540 NB DGBRLLF ENG indd 14 OPTICAL IN connection Connect an optical output jack of external devices to the OPT IN jack To the optical output jack of lt _ external device Speaker easy setup Listens to sound from TV DVD or Digital Device with 2 1 or 2 ch mode 1 Connect the OPT IN jack on the back of the unit to optical out jack of your TV or digital device etc 2 Select the input source to OPTICAL by
23. es is hazardous if inserted in a mains socket Do not connect either wire to the earth pin marked with the letter E or with the earth symbol or coloured green or green and yellow If any other plug is fitted use same rating of fuse in the plug Important The wires in this mains lead are coloured in accordance with the following codes BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of this unit may not correspond with the coloured marking identifying the terminals in your plug proceed as follows The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red M A 2014 07 14 X 2 10 52 Table of Contents 5 Table of Contents p Using Bluetooth App Install LG Bluetooth Remote App onto Your Bluetooth Device Activate Bluetooth with LG Bluetooth Remote App Sound adjustment Setting sound effect Adjust volume level autornatically Adjust the woofer level settings Controlling a TV with the supplied remote control Setting up the remote to control your TV Troubleshooting Troubleshooting Appendix 23 24 1 Getting Started SE 2 Safety Information 25 6 Unique features 25 6 ntroduction 25 6 Symbols used in this manual 26 6 Accessories T Remote contr
24. g up the wireless subwoofer for the first time Only use the AC adapter supplied with this 1 Connect the power cord of the wireless device Do not use a power supply from subwoofer to the outlet another device or manufacturer Using any 2 other power cable or power supply may cause damage to the device and void your warranty Turn on the main unit The main unit and wireless subwoofer will be automatically connected Manually pairing wireless subwoofer When your connection is not completed you can see the red LED or the blinking of yellow green LED on the wireless subwoofer and the subwoofer does not make sound To solve the problem follow the below steps 1 Adjust volume level of the main unit to minimum VOL MIN appears on the display window 2 Press and hold MUTEX Mute on the remote control for about 3 seconds W RESET appears on the display window briefly NB3540 NB DGBRLLF ENG indd 12 e 2014 07 14 KX 2 11 00 Connecting 13 3 Ifthe LED of the wireless subwoofer already blinks in yellow green continually you can skip this step Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds The LED of the wireless subwoofer lights up alternately in red and yellow green 4 Disconnect the power cord of the main unit and the wireless subwoofer 5 Connect them again after the LED of the main unit and the wireless subwoofer is fully turned off The main
25. h the LG TV that supports LG Sound Sync Make sure of the LG Sound Sync logo on your TV Controllable function by LG TV s remote control Volume up down mute Refer to the TV s instruction manual for the details of LG Sound Sync ake one of the following connections depending on the capabilities of your equipment gt a Note e You can also use the remote control of this unit while using LG Sound Sync If you use TV s remote control again the unit synchronizes with the TV When the connection fails make sure of the condition of the TV and power Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync Turn off the unit Changing the function to the others Disconnecting the optical cable Disconnecting the wireless connection caused by interference or a distance The amount of time to turn off this unit is different depending on your TV when you set AUTO POWER function to ON 2014 07 14 KX 2 11 02 Operating 21 With wired connection 1 Connect your LG TV to the unit by using an optical cable Optical cable OPTICAL ec LU 2 Setup the sound output of TV to listen to the sound through this unit TV setting menu Sound TV Sound output LG Sound Sync Optical 3 Turn on the unit by pressing 5 Power on the remote control 4 Select OPTICAL fun
26. n label on the subwoofer Power consumption Refer to the main label on the subwoofer Type 1 Way 1 Speaker mpedance 30 Rated Input Power 160W ax Input Power 320W Dimensions W x H x D 170 x 360 x 316 mm et Weight Approx 5 55 kg Designs and specifications are subject to change without prior notice NB3540 NB DGBRLLF ENG indd 30 2014 07 14 32 11 05 Warranty 31 LG Life s Good Technology with the human touch GUARANTEE LG Electronics U K Ltd will provide the following services in order toexpedite this Guarantee All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase 2 The dealer or his service agent who sold the product will be reimbursed for any labour provided in the repair of this LG equipment for a period of 12 months from the original date of purchase These claims must be made in accordance with the published scale of service charges and relevant claims procedure PLEASE NOTE A The dealer may restrict the guarantee to the original purchaser B The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the apparatus or if non standard components are used or if the serial number of the apparatus is removed defaced misused or altered C Any claims made under guarantee must be directed to the dealer from whom the eq
27. ol 26 8 Front panel 8 Rear panel 9 nstalling the sound bar 4 10 Mounting the main unit on a wall 2T 2 Connecting 2 Connecting the AC adapter 5 2 Wireless subwoofer connection 29 3 Connecting to your TV 29 3 Using an OPTICAL cable 29 4 Optional equipment connection 30 4 PORT Portable IN connection 4 OPTICAL IN connection 6 4 USB connection 5 Compatible USB devices 31 5 USB device requirement 6 Playable file 3 Operating Basic operations USB operation Other operations DRC Dynamic Range Control AV Sync Turn off the sound temporarily Displaying file and input source Sleep timer setting AUTO POWER On Off Auto function change LG Sound Sync Using Bluetooth technology 0 0000000 0 OOo N N NN N O 22 Listening to music stored on the Bluetooth devices NB3540 NB DGBRLLF ENG indd 5 Trademarks and licenses Maintenance e Handling the unit Specifications Warranty Warranty 2014 07 14 X 2 10 52 peers Buiyes EN 6 Getting Started Unique features Auto power down This unit will turn off by itself for energy saving consumption Portable In Listen to music from your portable device MP3 Notebook etc Speaker easy setup Listen to sound from TV DVD or Digital device with vivid 2 1 ch mode LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync In
28. ometimes even after the sound file changed Because this unit has an exclusive sound ffect for FLAC file the sound effect is fixed while playing FLAC file D NB3540 NB DGBRLLF_ENG indd 25 e 2014 07 14 KA 2 11 03 BuyessdoC a 26 Operating Controlling a TV with the supplied remote control You can control your TV using the buttons below Button Operation MUTEX Turn the TV s volume on or off Switch the TV s input source AV INPUT between the TV and other input sources 5 TV Power Turn the TV on or off Adjust the volume of the VOL 7 Scan up or down through PR CH A V memorized channels Note Depending on the TV being connected you may not be able to control your TV using some of the buttons he remote control of the unit performs basic operation of your TV Please use the TV s remote control to enjoy advanced operation of your TV NB3540 NB DGBRLLF ENG indd 26 Setting up the remote to control your TV You can operate your TV with the supplied remote control If your TV is listed in the table below set the appropriate manufacturer code 1 While holding down 5 TV Power button and press the manufacturer code for your TV with the numerical buttons see the table below Manufacturer Code Number LG 1 Default 2 Zenith 1 3 4 GoldStar 1 2 Samsung 6 7 Sony 8 9 Hitachi 4 2
29. ooth function is selected Play your music on the Bluetooth device When LG TV signal comes in When you turn on your LG TV connected by LG Sound Sync this unit changes the function to LG TV You can hear the sound from your TV When connecting LG Bluetooth Remote app When you connect your Bluetooth device by using LG Bluetooth Remote app this unit keeps the current function as well as you can control the unit by the app Buueiedo MUT 2014 07 14 KX 2 11 02 Buyesaodo WA 20 Operating Note To change to optical function it needs 5 seconds of no signal e Ifyou are using LG TV function this unit does not react to the Bluetooth connection e Ifyou are using Bluetooth function this unit does not react to LG TV connection Auto function change does not operate if your Bluetooth device or LG TV has never been paired with this unit e f you disconnect Bluetooth connection by this unit some B connect to the unit it is recommended e f you connect Blue Bluetooth Remote uetooth devices try to continually Therefore o disconnect the connection before changing the function ooth device by LG app when this unit is ready to pair with LG TV the unit change the function to Bluetooth NB3540 NB DGBRLLF ENG indd 20 LG Sound Sync Sound Syn6 Wireless You can control some functions of this unit by your TV s remote control with LG Sound Sync It is compatible wit
30. t contain numbers or English characters only ROOT The first screen you can see when a computer recognize the USB is ROOT NB3540 NB DGBRLLF ENG indd 16 e 2014 07 14 KA 2 11 02 Operating 17 Q Note Basic o peratio ns he resume point may be cleared when you pull out the power cord or removing the USB operation USB device from the unit P Repeat Random playback operates as 1 Connect the USB device to the USB port follows 2 Select the USB function by pressing FUNCTION on the remote control or F on the unit until the On Display Description function is selected OFF Plays songs on USB To Do this device in order Stop Press Bl RPTI Plays a ch song repeatedly Playback Press M are 2x ays songs in a folder Pause During playback press IM SEE repeatedly 3 During playback press P RPT ALL Plays all the songs on Oo on the remote control to go USB device repeatedly g o the next file d Playing less than 2 seconds RANDOM Plays songs randomly 2 Skip to the next previous file press k d on the remote control to go to the previous file Playing after 3 seconds press ke on the remote control o go to the beginning of he file Search for a section within a Press and hold He gt gt I during playback and release it at the point you want to listen file o except FLAC and OGG files Press REPEAT on
31. the remote control repeatedly the Play repeatedly display will be changed in the or randomly following order OFF RPT 1 gt RPT DIR DIRECTORY RPT ALL gt RANDOM Press 0 to 9 numerical buttons Select a file on the remote control to go directly to the desired file directly Search a folder Press FOLDER A V on the remote control Resume playback This unit memorizes a current song which is played before changing the function or turning off the unit NB3540 NB DGBRLLF ENG indd 17 N 7 2014 07 14 X 2 11 02 Buueisdo IIT 18 Operating Other operations DRC Dynamic Range Control Make the sound clear when the volume is turned down Dolby Digital only Set to DRC ON by using DRC AV Sync When receiving audio signals from TV sound and images may not be matched In the case this function can adjust the delay time 1 Press AV SYNC 2 Use I4 PI to scroll up and down through the delay amount which you can set at anything between 0 and 300 ms Q Note This function does not operate on USB function Turn off the sound temporarily Press MUTEX to mute your unit You can mute your unit for example to answer the telephone MUTE is displayed in the display window To cancel it press MUTEX again on the remote control or change the volume level NB3540 NB DGBRLLF_ENG indd 18 Displaying file and input source You can
32. to pp 13 15 Qo o i 2 e uo o 3 o Qa A Caution For best performance of wireless connection such as Bluetooth or wireless subwoofer do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit NB3540 NB DGBRLLF_ENG indd 9 D 2014 07 14 KX 2 10 57 10 Getting Started H H 1 Match the TV s BOTTOM EDGE of Wall bracket M ou nti ng the main install guide with the bottom of TV and attach unit on a wall to the position You can mount the main unit on a wall Preparation materials Unit pepers Bue MEN Wall bracket install guide zs bude 2 When you mount it on a wall concrete use the 2 gt gt Wall bracke wall plugs You should drill some holes A guide sheet Wall bracket install guide is supplied to O Screws drill Use the sheet to check the point to drill Not supplied Screws A aye Wall plug e e Note u V You should connect the supplied USB gender f changer in advance of mounting the unit on UE the wall for using a USB connection WALL BRACKETS mae ETINST UL IMORTINSIL Gune i 3 Remove the Wall bracket install guide NB3540 NB DGBRLLF ENG indd 10 e 2014 07 14 82 10 58 Getting Started 11 4 Fix the brackets with screws A as shown in the 6 Fix the unit with the screws firmly illustration below
33. troduction Symbols used in this manual Q Note Indicates special notes and operating features A Caution Indicates cautions for preventing possible damages from abuse NB3540 NB DGBRLLF_ENG indd 6 Accessories Please check and identify the supplied accessories Designs and specifications of the accessories are subject to change without prior notice Cable ties for arranging USB gender changer cables 2 1 Wall bracket 2 o Wall bracket install guide 1 v Screws 2 2014 07 14 X 2 10 56 Getting Started 7 Remote control onaj FOLDER Sii el C M mmc ame mms Gn 8 oe le A nos Battery Installation Remove the battery cover on the rear of the Remote Control and insert two R03 size AAA batteries with and Q matched correctly NB3540 NB DGBRLLF ENG indd 7 5 Power Switches the unit ON or OFF FUNCTION Selects the function and the input source FOLDER A V Searches a folder on USB device OPTICAL Changes input source to OPTICAL directly MUTE X Mutes the sound VOL Adjusts speaker volume e ee x x s AUTO POWER Turns on or off AUTO POWER function Refer to the page 19 AV SYNC Synchronizes the audio and video INFO Displays the information of a file or an input source o i J o A w 3 o o REPEAT Listen to your files repeatedly or randomly I 4 gt l Skip S
34. uipment was originally purchased The dealer may before carrying out service under guarantee require a receipted account as evidence of the date of purchase D We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in use E Aerial alignment and consumer control adjustments are not covered by this guarantee This guarantee does not affect your statutory rights REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED Product Registration Card It is helpful to complete at least your name address phone model amp serial numbers and return it This will enable LG to assist you in the future should you lose your receipt your units be stolen or should modifications be necessary To obtain information or assistance Call UK 0344 847 5454 IE 01 686 9454 MODEL NO SERIAL NO DATE OF PURCHASE w m 3 w 3 lt In all cases of difficulty consult your LG dealer from whom the product was purchased LGEUK Website www lg com uk Service website www lg com uk support NB3540 NB DGBRLLF_ENG indd 31 e 2014 07 14 KA 2 11 05 LG Life s Good NB3540 NB DGBRLLF ENG indd 32 e 2014 07 14 KX 2 11 05
35. unit and the wireless subwoofer will be paired automatically when you turn on the main unit When the connection is completed you can see the yellow green LED on the subwoofer Note t takes a few seconds and may take longer for the main unit and the subwoofer to communicate with each other and make sounds The closer the main unit and the subwoofer the better sound quality It is recommended to install the main unit and the subwoofer as close as possible within 5 m and avoid the cases below There is a obstacle between the main unit and the subwoofer There is a device using same frequency with this wireless connection such as a medical equipment a microwave or a wireless LAN device NB3540 NB DGBRLLF ENG indd 13 Connecting to your TV Using an OPTICAL cable 1 Connect the OPT IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable Optical cable OPTICAL OUT 2 Set the INPUT source to OPTICAL Press repeatedly FUNCTION on the remote control or F on the unit until the function is selected To directly select the OPTICAL function press OPTICAL on the remote control m Note e You can enjoy the TV audio through the speakers of this unit In the case of some TV models you must select the external speaker option from the TV menu For details reference your TV us
36. ust volume level automatically This unit supports Auto volume function that Setting sound effect automatically adjusts the volume level This system has a number of pre set surround When the output sound is too loud or too low sound fields You can select a desired sound mode press AUTO VOLUME on the remote control So by using SOUND EFFECT you can enjoy the sound with appropriate levels The displayed items for the equalizer may be To cancel this function press the button again different depending on sound sources and effects Adjust the woofer level ttin You can enjoy the sound 3E 9s without equalizer effect You can adjust the sound level of woofer from 40 Th less dB to 6 dB i E MR INE R 1 Press WOOFER LEVEL NEWS sound clear improving the quality of voice sound 2 Press VOL to adjust the sound level of the woofer On Display Description STD Standard Buueiedo WA You can enjoy comfortable MERE and natural sound You can enjoy more immersive CINEMA and cinematic surround sound You can enjoy more dynamic SPORTS sound The Bass is Bass Blast During playback reinforce the treble bass and surround sound effect BASS q Note n some of surround modes some speakers there s no sound or low sound It depends on the mode of surround and the source of audio it is not defective You may need to reset the surround mode after switching the input s
Download Pdf Manuals
Related Search